Screening of sugars and cyclodextrins as carriers in montelukast dry powder inhalers processed by spray freeze drying

The purpose of this study was to develop a site targeting montelukast sodium (MTK) microparticles as a respiratory drug delivery system using the spray freeze drying (SFD) process. A range of sugars and cyclodextrins (CDs) were screened as carrier in order to find compatible excipients for the preparation of dry powder inhalers (DPIs). The physical characteristics of collected powders were studied by scanning electron microscopy (SEM), laser light scattering, differential scanning calorimetry (DSC), and X-ray diffraction (XRD). The aerodynamic behavior of the particles was also assessed using twin stage impinge (TSI). In the presence of simple sugars as carriers, highly porous particles in irregular shapes were produced. The use of CDs resulted in the formation of spherical particles with high porosity. Among all carriers that were used during the preparation of powders, raffinose had the best aerodynamic behavior with a fine particle fraction (FPF) of 60 % in sugar groups, while the lowest FPF was related to trehalose as carrier. Powders containing CDs mostly showed proper aerodynamic behavior, especially in formulations containing alfa-cyclodextrin (A-CD), beta-cyclodextrin (β-CD), and highly branched cyclic dextrin (HBCD). Overall, data indicated that the CDs were excellent excipients for use with MTK for respiratory drug delivery.     

3D printing vertically: Direct ink writing free-standing pillar arrays

Over the last three decades, a variety of additive manufacturing techniques have gradually gained maturity and will potentially play an important role in future manufacturing industries. Among them, direct ink writing has attracted significant attention from both material and tissue engineering areas, where the colloidal ink is extruded and dispensed according to a pre-designed path, usually in the X-Y plane with suitable increments in the Z direction. Undoubtedly, this way of disassembling geometries, simple or complex, can facilitate most of the printing process. However, for one extreme case, i.e. pillar arrays, the size resolution can deviate from both nozzle and design if the common way of slicing and additive manufacturing is used. Therefore, a different printing path is required – directly depositing pillars in a converse gravitational direction. This paper gives multiple examples of printing viscoelastic colloidal ceramic and metal inks uniaxially and periodically into free-standing and height-adjustable pillar arrays. It is expected to inspire the additive manufacturing community that more versatile degrees of freedom and complex printing paths, not confined within only complex shapes, can be achieved by ink-based 3D printing.     

Novel preparation approach with a 2-step process for spherical particles with high drug loading and controlled size distribution using melt granulation: MALCORE®

A novel approach for preparing drug-containing particles (DCPs) with controlled size distribution and high drug loading was developed using melt granulation. This approach comprises two steps. First, melting component adsorbed particles (MAs) were prepared by mixing and heating the melting components with a porous carrier using a high shear granulator. Second, DCPs were prepared by layering the drug on MAs using a fluidized bed rotor granulator. The time taken for both steps was within 30 min. Adding the polymer in the second step remarkably increased the viscosity of the mixture of melting components and the polymer. Therefore, DCPs could be successfully loaded with a high amount of drug (70% w/w). The particle size distribution of the DCPs was narrow, and it depended on that of the MAs. The flowability of the DCPs was excellent, and the sphericity was close to 1. A unique particle formulation mechanism was suggested based on the observation of DCPs using scanning electron microscopy. The manufacturing time and DCP characteristics were not affected by the manufacturing scale. In conclusion, we have successfully developed a highly efficient novel approach for preparing optimal DCPs through melt granulation, named “Melt Adsorption and Layering with Porosity Core” (MALCORE®).     

Investigation of the molecular state of 4-aminosalicylic acid in matrix formulations for dry powder inhalers using solid-state fluorescence spectroscopy of 4-dimethylaminobenzonitrile

Carrier-free method is an alternative approach for dry powder inhaler (DPI) formulations, which overcome poor drug mobility and distribution. Here we investigated the properties of an active pharmaceutical ingredient (API) within composite particles. We used highly-branched cyclic dextrin (HBCD) as the excipient matrix that was prepared using a spray-drying technique. 4-Aminosalicylic acid (4-ASA) and 4-dimethylaminobenzonitrile (DMABN) were selected as a hydrophilic second-line antitubercular agent and a surrogate for 4-ASA as a model compound, respectively. The spray-dried particles (SDPs) containing 4-ASA or DMABN with HBCD had geometric median diameters (D₅₀) of 2.34 ± 0.07 μm and 2.26 ± 0.10 μm, respectively. Further, the in vitro aerodynamic properties were similar for SDPs containing 4-ASA and DMABN with HBCD. To determine the properties of APIs within composite particles, we performed solid-state fluorescence spectroscopy of DMABN. As a candidate excipient, hydroxypropyl methylcellulose (HPMC) was compared to HBCD. We determined the intensity ratio of twisted intramolecular charge transfer (TICT) emission to locally excited emission within the excipient matrix environment. The HBCD matrix environment was better than HPMC to trigger a more robust TICT reaction of DMABN. A potent state-changing interaction of APIs occurred in the HBCD matrix environment versus another excipient environment.     

Designing amorphous formulations of polyphenols with naringin by spray-drying for enhanced solubility and permeability

Naringin (NAR), a major flavanone (FVA) glycoside, is a component of food mainly obtained from grapefruit. We used NAR as a food additive to improve the solubility and permeability of hydrophobic polyphenols used as supplements in the food industry. The spray-dried particles (SDPs) of NAR alone show an amorphous state with a glass transition temperature (T_g) at 93.2 °C. SDPs of hydrophobic polyphenols, such as flavone (FVO), quercetin (QCT), naringenin (NRG), and resveratrol (RVT) were prepared by adding varying amounts of NAR. All SDPs of hydrophobic polyphenols with added NAR were in an amorphous state with a single T_g, but SDPs of hydrophobic polyphenols without added NAR showed diffraction peaks derived from each crystal. The SDPs with NAR could keep an amorphous state after storage at a high humidity condition for one month, except for SDPs of RVT/NAR. SDPs with NAR enhanced the solubility of hydrophobic polyphenols, especially NRG solubility, which was enhanced more than 9 times compared to NRG crystal. The enhanced solubility resulted in the increased membrane permeability of NRG. The antioxidant effect of the hydrophobic NRG was also enhanced by the synergetic effect of NAR. The findings demonstrated that NAR could be used as a food additive to enhance the solubility and membrane permeability of hydrophobic polyphenols.     

Granulation of ibuprofen/isonicotinamide co-crystals by continuous spray granulator (CTS-SGR)

The importance of granulation is paramount for tablet manufacturing, and is based on the fact that granulated powders are characterized by improved flowability, compressibility, segregation, and dust reduction. The aim of this study was to prepare and characterize continuous granules of high drug content by using a continuous-spray granulator (CTS-SGR). Ibuprofen (IBU), a drug of low-flowability, was selected as the model drug. As IBU has a low melting point and cannot easily granulate on its own, we employed isonicotinamide (INA) as a coformer that would allow us to prepare co-crystal granules containing 60 % IBU. The results of the undertaken differential scanning calorimetry and powder X-ray diffraction revealed that the IBU and the INA in the granules formed co-crystals. The granulation conditions affected the particle size and the yield of the granules; in fact, a low air supply temperature, a low atomizing air rate, and a high solution flow rate ensured a high granulation efficiency. Moreover, continuous granulation increased the yields of the formulations compared to those obtained through a short-run granulation, and high yields were obtained after applying a low atomizing air rate. The circularity of the granules exceeded 90 %, and their flowability improved when compared to that of the IBU bulk. The undertaking of dissolution studies revealed no change in the elution amount of IBU as a result of the co-crystallization. Our study shows that it is possible to produce high-content IBU granules in a direct and continuous manner through the co-crystallization of IBU and the use of a CTS-SGR.     

Three-dimensional periodic structures of gold nanoclusters in the interstices of sub-100 nm polymer particles toward surface-enhanced Raman scattering

Regularly ordered polymer nanoparticle (PNP) assemblies incorporating gold nanoparticle (Au NP) clusters into the PNP interstices were fabricated by a simultaneous deposition of PNPs and Au NPs on a glass substrate. Monodisperse PNPs with an average size of 66 nm were employed as a template in the co-assembly to create the sub-100 nm periodic Au nanostructures on the substrate. First, mono-layering of PNP array with incorporation of 14 nm Au NPs was performed by a drop-casting to examine the number ratio of Au NPs to PNPs for multi-layering. Absorption spectra of the mono-layered co-assemblies of PNPs and Au NPs were employed to characterize the clustered state of Au NPs in the interstices of mono-layered PNPs. The number ratio suitable for homogeneous incorporation of Au NPs clustered in the interstice was found to be ranged from 6 to 8 in the characterization. Then, multi-layered co-assemblies of PNPs and clustered Au NPs were fabricated by a vertical deposition method with the Au NP number ratio of 8 to PNPs. Lifting rate of the substrate on which the PNPs were deposited was varied in the vertical deposition method to tune the film thickness of NP co-assembly. A decrease in the lifting rate to 1 μm/s could thicken the film to 0.71 μm corresponding to 13 layers of PNPs, resulting in the fabrication of periodic structures of Au NP clusters with a high packing density. Signal-to-noise ratio in the Raman measurement using p-mercaptobenzoic acid as a target molecule was successfully enhanced by multi-layering of the co-assembly, indicating that Au NP clusters were homogeneously incorporated into the interstices of PNPs in the co-assemblies.     

Changes in the oxygen content,morphology, and microstructure of Mo-10Nb composite powders during mechanical alloying

The prefabrication of Mo-Nb composite powders is an effective way of improving the homogeneity of Mo-10Nb targets, which have broad application prospects in the photoelectric sensor industry. However, this aspect has been rarely addressed so far. Therefore, we prepared Mo-10Nb composite powders by mechanical alloying (MA), and investigated the effects of the experimental parameters such as the milling speed and duration on the particle morphology, size distribution, compositional homogeneity, crystallite size, inner strain, and oxygen content. High-quality Mo-10Nb composite powders with 3-μm spherical particles of narrow size distribution, homogeneous elemental distribution, and nanometric crystalline structure were obtained by implementing optimum MA parameters, viz., a milling speed of 250 rpm and duration of 36 h using an MITR QM-QX-4L omnidirectional ball mill. The mechanically alloyed Mo-10Nb composite powders were prone to oxidation when exposed to air, which led to a sharp increase in the oxygen content to ~5400 ppm. X-ray photoelectron spectroscopic analysis revealed the presence of Nb₂O₅, MoO₂, and MoO₃ on the surface of the Mo-10Nb particle. We believe that this study demonstrates an interesting strategy for the fabrication of high-quality Mo-10Nb targets.     

Particle tracking microrheology of cancer cells in living subjects

Cumulative evidence shows that microenvironmental conditions play a significant role in the regulation of cell functions, and how cells respond to these conditions are of central importance to regenerative medicine and cancer cell response to therapeutics. Here, we develop a new method to examine cell mechanical properties by analyzing the motion of nanoparticles in living in mice, combining particle tracking with intravital microscopy. This method directly examines the mechanical response of breast carcinoma cells and normal breast epithelial cells under intravital microenvironments. Our results show both carcinoma and normal cells display significantly reduced compliance (less deformability) in vivo compared to the same cells cultured in 2D, in both sparse and confluent conditions. While the compliance of the normal cells remains steady over time, the compliance of carcinoma cells decreases further as they form tumor-like architectures. Integrating the cancer cells into spheroids embedded in 3D collagen matrices in part redirected the mechanical response to a state closer to the in vivo setting. Overall, our study demonstrates that the microenvironment is a crucial regulator of cell mechanics and the intravital particle tracking method can provide novel insights into the role of cell mechanics in vivo.     

Synergistic antidiabetic activity of ZnO nanoparticles encompassed by Urtica dioica extract

The present study aimed at producing ZnO nanoparticles using the leaf extract of nettle (Urtica dioica) as a medicinally valuable plant to maximize the antidiabetic property of ZnO while excluding the chemical pollution from the synthesis process. The properties of the ZnO-extract sample were uncovered by various techniques and compared to that produced without the extract (ZnO). The results of the surface, optical, and thermal studies disclosed the presence of the extract biomolecules over the ZnO-extract sample and was further confirmed by GC–MS analysis. The ZnO-extract was intraperitoneally injected to alloxan-induced diabetic rats and the effects on the serum levels of fasting blood glucose, insulin, high-density lipoprotein cholesterol, total cholesterol, and total triglyceride were assessed. The obtained results were then compared with the effects of ZnO, nettle leaf extract, and insulin on the same factors. Among all the examined treatments, the best antidiabetic performance was obtained in the rats treated by ZnO-U. dioica extract mainly owing to the great synergistic interaction between its constituents.     

Steel slag waste combined with melamine pyrophosphate as a flame retardant for rigid polyurethane foams

To explore the potential application of industrial waste, steel slag powder in combination with melamine pyrophosphate (MPP) was adopted to improve the flame retardancy of rigid polyurethane foam (RPUF). The incorporation of steel slag slightly reduced the thermal conductivity of the resulting flame-retardant RPUF samples. The addition of MPP and/or steel slag did not significantly alter the thermal stability in terms of T_-10% and T_max but did obviously increase the T_-50% value, suggesting the improved thermal resistance of the residues. The coaddition of MPP and steel slag into RPUF resulted in higher LOI values and lower peak heat release rates than the samples incorporating either MPP or steel slag alone. The superior flame retardancy could be attributed to MPP promoting char formation, which then acted as a barrier at the beginning of RPUF thermal decomposition; simultaneously, the thermally stable inorganics in the steel slag powder strengthened the thermal resistance of this char layer.     

Improving hydrothermal performance of hybrid nanofluid in double tube heat exchanger using tapered wire coil turbulator

Tapered wire coil insert is proposed as a novel enhancer in the double tube heat exchanger and experimental studies on Al₂O₃ + MgO hybrid nanofluid flowing under the turbulent condition are performed to investigate the hydrothermal characteristics. Effects of using tapered wire coil turbulator and hybrid nanofluid on the hydrothermal behaviors are examined for different coil configurations (Converging (C) type, Diverging (D) type and Conversing-Diverging (C-D) type) and hybrid nanofluid inlet temperatures and volume flow rates. Results show that D-type wire coil insert promotes better hydrothermal performance as compared to C-type and C-D type. Nusselt number and friction factor of hybrid nanofluid using D-type, C-D type and C-type wire coil inserts enhance up to 84%, 71% and 47%, and 68%, 57% and 46%, respectively than that of water in tube without insert. The entropy generation of hybrid nanofluid is lower than that of base fluid in all cases. The thermal performance factor for hybrid nanofluid is found more than one with all inserts. The thermal performance factor is observed a maximum of 1.69 for D-type coil. The study reveals that the hybrid nanofluid and tapered wire coil combination is promising option for improving the hydrothermal characteristics of double pipe heat exchanger.     

Electrochemical treatment of soil-washing effluent with boron-doped diamond electrodes: A review

In recent years, electrochemical technologies have been widely used to remove contaminants at lab-scale and semi-pilot scale. Boron-doped diamond (BDD) electrodes have been considered as efficient materials for the abatement of persistent organic pollutants owing to their outstanding properties, such as rapid rates of electron-transfer for soluble redox systems, wide electrochemical potential window for water discharge reactions in aqueous and non-aqueous electrolytes, and high stability. Similar to other applications of electrochemical technology, wastes display medium to high ionic conductivity. Therefore, one of the applications highlighted for the electrolysis with these new electrodes is the treatment of soil-washing fluids, because in the polluted streams, washing of polluted soils provides a suitable conductivity to the effluent. In this context, this review summarizes the application of conductive diamond anodes for the electrochemical treatment of soil-washing effluents contaminated with different persistent organic pollutant such as pesticides, hydrocarbons, dyes, and organochlorine compounds, in single anodic oxidation processes and in other more complex processes such as electro-Fenton, photoelectrolysis, or sonoelectrolysis. Finally, the challenges and future research directions of electrochemical technology are discussed and outlined at pilot and prototype scale.     

Metal-organic framework derived hexagonal layered cobalt oxides with {1 1 2} facets and rich oxygen vacancies: High efficiency catalysts for total oxidation of propane

A cobalt-based metal–organic framework was used as a precursor to synthesize Co₃O₄ catalysts exhibiting a hexagonal layered morphology by calcination at varying temperatures. Various characterization techniques, such as XRD, SEM, Raman, H₂-TPR, O₂-TPD and N₂ adsorption–desorption, were used to study the effects of calcination temperature on the grain size, surface area, and pore volume of the catalysts. The Co₃O₄ catalyst obtained by calcination at 350 °C (Co₃O₄-350) exhibited the highest catalytic activity for the total oxidation of propane. Furthermore, the small grain size and layered structure of Co₃O₄-350 allowed it to possess a high specific surface area, a highly exposed {1 1 2} facets, and abundant oxygen defects that facilitated a favorable low-temperature reducibility and oxygen mobility, thereby improving catalytic activity. This research offers a simple strategy for synthesis of Co₃O₄ with layered structure, highly exposed {1 1 2} facets and rich oxygen defects.     

Powder flow and mixing in different tablet press feed frames

Tablets can be manufactured using a rotary tablet press, which consists of a feed frame followed by the compression and compaction of the powder and subsequent ejection of the tablets. From Quality by Design (QbD) perspectives the feed frame plays a critical role and effects products critical quality attributes (CQAs). Thus optimizing this stage is of huge interest. It is preferable to achieve narrow residence time distributions of the powder in the feed frames as well as homogeneous tablets with respect to their height, weight and tensile strength. In the present study three design approaches of feed frames are simulated using the Discrete Element Method (DEM). We investigate the influence of operational input parameters (i.e., rotational rates) on the behaviour of a free flowing and a cohesive material. The detailed simulation data allows us to compare the mentioned setups in terms of residence times, tablet masses and occurring deviations. Therefore, we are able to determine the optimal feed frame and process settings for both free-flowing and cohesive powders.     

Recent breakthroughs and perspectives of high-energy layered oxide cathode materials for lithium ion batteries

Ni-rich layered oxides (NRLOs) and Li-rich layered oxides (LRLOs) have been considered as promising next-generation cathode materials for lithium ion batteries (LIBs) due to their high energy density, low cost, and environmental friendliness. However, these two layered oxides suffer from similar problems like capacity fading and different obstacles such as thermal runaway for NRLOs and voltage decay for LRLOs. Understanding the similarities and differences of their challenges and strategies at multiple scales plays a paramount role in the cathode development of advanced LIBs. Herein, we provide a comprehensive review of state-of-the-art progress made in NRLOs and LRLOs based on multi-scale insights into electrons/ions, crystals, particles, electrodes and cells. For NRLOs, issues like structure disorder, cracks, interfacial degradation and thermal runaway are elaborately discussed. Superexchange interaction and magnetic frustration are blamed for structure disorder while strains induced by universal structural collapse result in issues like cracks. For LRLOs, we present an overview of the origin of high capacity followed by local crystal structure, and the root of voltage hysteresis/decay, which are ascribed to reduced valence of transition metal ions, phase transformation, strains, and microstructure degradation. We then discuss failure mechanism in full cells with NRLO cathode and commercial challenges of LRLOs. Moreover, strategies to improve the performance of NRLOs and LRLOs from different scales such as ion-doping, microstructure designs, particle modifications, and electrode/electrolyte interface engineering are summarized. Dopants like Na, Mg and Zr, delicate gradient concentration design, coatings like spinel LiNi_0.5Mn_1.5O₄ or Li₃PO₄ and novel electrolyte formulas are highly desired. Developing single crystals for NRLOs and new crystallographic structure or heterostructure for LRLOs are also emphasized. Finally, remaining challenges and perspectives are outlined for the development of NRLOs and LRLOs. This review offers fundamental understanding and future perspectives towards high-performance cathodes for next-generation LIBs.     

CFD modelling and simulation of an industrial scale continuous fluidized bed roaster

In the present work, computational fluid dynamics (CFD) based modelling of an industrial scale continuous fluidised bed roaster (FBR) has been carried out to study its performance at different operating conditions, so that the sulphide-sulphur content in the product is within 0.4% at the designed feed rate of 39.75 DMT/h. Eulerian-Eulerian multiphase model, considering four granular phases and one gas phase has been implemented to investigate the velocity and mass fraction profile of the particles in the FBR. The heat and species mass balance calculations have been performed external to CFD, by dividing the roaster into several sections. The conversion of ZnS to ZnO at various sections of the roaster has been estimated using reaction kinetics under isothermal condition (1203 K). The heat liberated and possible temperature rise at each section was predicted based on the heat of reaction and sensible heat of the solid and gaseous products. The CFD model was validated with the plant data for a feed rate of 36.5 DMT/h, air flow rate of 65,000 Nm³/h and O₂ content of 21%. The proposed model predicted the sulphide-sulphur content in the product to be 0.4% for the designed feed rate of 39.75 DMT/h, when the O₂ content in the inlet air was increased to 25%.     

Influence of the solvent evaporation rate on the β-Phase content of electrosprayed PVDF particles and films studied by a fast Multi-Overtone QCM

A combination of an electrospray setup and a quartz crystal microbalance with dissipation monitoring (QCM-D) was employed to study the drying of droplets of poly(vinylidene fluoride) (PVDF) dissolved in dimethylformamide (DMF). A novel variant of the QCM was used, which interrogates the resonance frequency and the resonance bandwidth on four overtones at the same time, achieving a time resolution of 2 ms. This instrument allowed to elucidate the mechanism of β-phase formation in electrospray deposition of PVDF. When the distance between the nozzle and the substrate was small, the droplets landed in a partially wet state, as evidenced from an increase in the resonance bandwidth. No such increase in bandwidth was observed when the distance was large. From the flight time (milliseconds) and the drying time on the substrate (seconds), one concludes that drying in the plume is faster than drying on the substrate. IR spectra show that the β–phase content is close to 100 % for particles, which dried in the plume. It is less than 50 % for particles having dried on the substrate. Fast drying promotes the formation of the β-phase. Follow-up experiments with thicker films on steel substrates also show increased β-phase content for larger distances.     

Stabilizing effect of the cyclodextrins additive to spray-dried particles of curcumin/polyvinylpyrrolidone on the supersaturated state of curcumin

Although curcumin is considered to have various therapeutic effects, its use as a functional food or supplement is restricted owing to its low water solubility and bioavailability. To increase the solubility of curcumin in water, the use of polyvinylpyrrolidone (PVP) and vinylpyrrolidone-vinyl acetate copolymers with a pyrrolidone skeleton was noted to be promising. In particular, the bi-component formulations of curcumin/PVP prepared through spray drying exhibited an amorphous state in powder X-ray diffraction observations and temporally increased the apparent solubility of curcumin to over 5000 times that of untreated curcumin; nevertheless, after 24 h, the solubility decreased owing to the unstable supersaturated state of curcumin. The addition of α-cyclodextrin (α-CyD) in the bi-component curcumin/PVP formulation helped maintain the supersaturated state of curcumin, whereas the addition of β- and γ-CyD led to the collapse of the supersaturated state. The addition of α-CyD can likely help inhibit the nucleation and crystal growth of curcumin, through the interaction among the solubilized units of curcumin/PVP and α-CyD.