聚合离子液体毛细管气相色谱固定相的性能评价

离子液体作为毛细管气相色谱固定相的选择性和热稳定性是近年人们关注的课题。本文合成了1-烯基-3-苄基咪唑-二(三氟甲基磺酰)亚胺盐(VBIm-NTf2)离子液体并经毛细管柱内聚合制得了聚合离子液体PVBIm-NTf2色谱柱。与VBIm-NTf2色谱柱相比,PVBIm-NTf2色谱柱具有良好的色谱选择性和热稳定性。PVBIm-NTf2色谱柱对Grob试剂、醇混合物、酯混合物和苯系物等都表现了很好的分离能力,并且色谱峰峰形窄且对称。该聚合色谱柱在250 ℃下老化6 h后仍具有良好的分离能力和选择性。本文还测定了PVBIm-NTf2的Abraham溶剂化参数,解析了该固定相与溶质间的相互作用,相关研究国内尚未见报道。研究表明,对常规离子液体进行柱内聚合是改善常规离子液体气相色谱固定相的热稳定性和选择性的有效途径。     

气相色谱手性固定相研究进展

本文评述了气相色谱手性分离的发展过程,介绍了氨基酸、二肽、金属配合物、环糊精、多糖、手性离子液体、环肽、键合以及交联类气相色谱手性固定相以及各类型的拆分机理,展望了气相色谱手性固定相的研究前景。     

气相色谱手性固定相研究进展

本文评述了气相色谱手性分离的发展过程,介绍了氨基酸、二肽、金属配合物、环糊精、多糖、手性离子液体、环肽、键合以及交联类气相色谱手性固定相以及各类型的拆分机理,展望了气相色谱手性固定相的研究前景.     

气相色谱手性固定相研究进展

本文评述了气相色谱手性分离的发展过程,介绍了氨基酸、二肽、金属配合物、环糊精、多糖、手性离子液体、环肽、键合以及交联类气相色谱手性固定相以及各类型的拆分机理,展望了气相色谱手性固定相的研究前景.     

聚硅氧烷键合离子液体的合成及色谱性能

提出了一种基于聚硅氧烷键合离子液体(PSOIL)的气相色谱固定相的方法, 即首先合成γ-氯丙基聚硅氧烷, 然后通过氯丙基与甲基咪唑的反应合成了聚硅氧烷负载的离子液体, 并对其色谱性能及分离选择性进行了评价.     

聚硅氧烷键合的离子液体用作高温气相色谱固定相的研究

合成了阴离子为二(三氟甲基磺酸酰)亚胺(NTf-2)的新型聚硅氧烷键合离子液体 ([PSOMIm][NTf2]),并采用静态涂渍法,制备了毛细管气相色谱柱.该固定相具有良好的热稳定性.热重测试显示,温度高于380 ℃后,[PSOMIm][NTf2]开始缓慢分解.色谱性能评价显示,此固定相对多种异构体和同系物均具有良好的分离选择性和高的热稳定性.对Grob试剂的分离结果表明,各种组分均能在柱上得到良好的分离且峰的对称性很好.此新型聚合物离子液体在高温气相色谱固定相的研究和应用方面具有较大的潜力.     

色谱分析中离子液体的应用及其测定

离子液体作为一种优良的溶剂越来越受到人们的关注。由于离子液体特殊的物理化学性质使其在色谱分析中也得到了较广泛的应用。本文综述了离子液体在气相色谱、高效液相色谱和毛细管电泳中的应用,其中包括离子液体作为气相色谱的固定相、高效液相色谱的固定相及流动相添加剂和毛细管电泳的电解质添加剂等,并对离子液体的色谱分离检测作了详细介绍。     

手性离子液体的合成

近年来,研究者对室温离子液体极为关注,因为这些离子液体可以作为潜在的替代试剂用于有机合成、提取与分离、电化学和材料科学等方面。在离子液体中,手性离子液体由于可用在手性识别、不对称合成、消旋体的拆分、立体选择聚合、气相色谱、NMR位移试剂和液晶等方面而受到特别注意。尽管手性离子液体由于合成困难和费用昂贵而限制了其广泛应用,但其在不对称合成中可作为手性诱导物的应用前景促使研究者不断地去开发新型的手性离子液体。手性离子液体的制备既可以使用手性源（如氨基酸、胺、氮基醇以及生物碱类）,也可以利用不对称合成的手段,其所具有的手性可位于分子的中心、轴或者平面上。本文综述了手性离子液体合成的最新进展,并按照阴离子或阳离子的种类将其分为咪唑类、吡啶类、铵类和噻唑啉盐类,同时简要介绍了一些新的合成技术。     

手性离子液体和纤维素三(3,5-二甲基苯基氨基甲酸酯)混合气相色谱手性固定相研究

合成了手性离子液体[C7H17NO] [(CF3SO2)2]-和纤维素三(3,5-二甲基苯基氨基甲酸酯),将其混合作为气相色谱固定相。研究结果表明:该混合固定相麦氏常数的平均极性值为760;在容量因子大于2的前提下,新型柱的塔板数可达1680块/m;其对手性化合物、特别是对氨基酸类具有良好的分离效果。有10对氨基酸的分离因子大于1.10,展示了该类色谱柱良好的手性应用前景。     

聚硅氧烷离子液体用于快速气相色谱固定相的研究北大核心CSCD

合成了聚硅氧烷键合离子液体[PSOMIM][NTf2],并将其用作快速气相色谱柱的固定相。初步探索了采用短柱及小内径毛细管柱(3m×75μm i.d.)时的分离性能及固定相膜厚对分离性能的影响。与常规柱(8m×0.25mm i.d.)相比,在不损失分离度的前提下,分离速度可提高1~6倍;当膜厚为0.056μm时,可以将分离速度提高2~4倍。实验结果表明,聚硅氧烷键合离子液体固定相可以有效弥补由于缩短柱长所导致的分离度减小的问题,在快速气相色谱固定相方面具有较好的应用前景。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.