Application of electrospray mass spectrometry in the detection and determination of Remazol textile dyes.

The electrospray (ES) behaviour of selected Remazol textile dyes, their hydrolysis products and the latters' reaction, following elution from a strong anion-exchange cartridge, with 30% concentrated HCl in MeOH, is studied and applied to the direct analysis of dye containing effluent. For unambiguous identification and determination of these textile dyes in effluents, it is necessary to resort to ES utilising MS-MS and MS3. Further, a tabular review of recent applications of HPLC-ES-MS and, to a lesser extent, CE-ES-MS with reference to drug and pesticide analysis is presented.     

Characterization of sulfonated azo dyes and aromatic amines by pyrolysis gas chromatography/mass spectrometry

Sixteen sulfonated and unsulfonated azo dyes as well as eleven sulfonated and unsulfonated aromatic amines were analyzed and qualitatively characterized by means of pyrolysis gas chromatography/mass spectrometry at different temperatures. Aniline and aminonaphthalene were found to be the dominant pyrolysis products of sulfonated aromatic amines and dyes. Azo dye and dye class specific key compounds such as benzidine, vinyl-p-base and 4-aminoazobenzene could be identified by pyrolysis gas chromatography/mass spectrometry of commercial acid, cationic, direct, reactive and solvent dyes. 500 degrees C was the optimal pyrolysis temperature for most of the pyrolyzed compounds. The method was applied to a dried sample of a textile wastewater concentrate from a dyeing process. Reactive azo dyes of the group of Remazol dyes and anthraquinone dyes could be identified as the major compounds of the sample. The finding of caprolactam (a printing additive) suggests that the wastewater contained effluent from a process of heat-activated printing with reactive dyes. p-Chloraniline, a banned aromatic amine, was identified. Chemical reduction of the wastewater sample prior to pyrolysis resulted in the release of volatile aromatic amines and aided the classification of several products of pyrolysis.     

Biosensors Based on Laccase for Detection of Commercially Reactive Dyes

The results obtained using Trametes versicolor laccase modified graphite electrodes for detection of eleven different commercially reactive dyes are presented for the first time herein. The increase in current upon injection of the analyzed substrate was shown to be approximated by Michaelis–Menten type dependence. The calculated kinetic constants were used to evaluate the applicability of the laccase modified graphite electrode for the detection of reactive dyes in textile effluents.     

Stereoisomer quantification of the beta-blocker drugs atenolol, metoprolol, and propranolol in wastewaters by chiral high-performance liquid chromatography-tandem mass spectrometry

A chiral liquid chromatography-tandem mass spectrometry (HPLC-MS-MS) method was developed and validated for measuring individual enantiomers of three beta-blocker drugs (atenolol, metoprolol, and propranolol) in wastewater treatment plant (WWTP) influents and effluents. Mean recoveries of the pharmaceuticals ranged from 67 to 106%, and the limits of detection of the analytes were 2-17 ng/L in wastewater effluents. The method was demonstrated by measuring, for the first time, the stereoisomer composition of target analytes in raw and treated wastewaters of two Canadian WWTPs. In these trials, racemic amounts of the three drugs were observed in influent of one wastewater treatment plant, but nonracemic amounts were observed in another. Effluents of the two plants contained nonracemic amounts of the drugs. These results indicate that biologically-mediated stereoselective processes that differ among WWTPs had occurred to eliminate individual enantiomers of the target analytes.     

Photo-electrochemically Synergetic Effect in the Catalytic Degradation of Reactive Dyes

The dye wastewater has a high potential environmental impact principally due to the wastewater containing high organic charge and strong coloration. As far as back the 1980s, the totals of synthesized dyes have been more than 800 thousand tons every year in the whole would. However, in the all of dyes, reactive dyes represent an important fraction of the commercialized synthetic pigments used. The major environmental problem associated with the use of the reactive dyes is their loss in the dyeing processes with general low fixation efficiency, large mount of dye-containing wastewater was inevitably discharged into water supply. So, the treatment of wastewater containing reactive dyes is very urgent for our health.     

高效液相色谱法测定氧化型染发产品中40种染发剂

氧化型染发产品中的多种染发剂具有不同程度的致敏性及其他毒性,建立快速、准确检测多种染发剂的方法,为该类产品监管提供有效的技术手段,十分必要。该研究建立了氧化型染发类产品中40种染发剂的高效液相色谱测定方法。染发产品经含70%乙醇的亚硫酸氢钠水溶液涡旋、超声提取,并经亚硫酸氢钠水溶液稀释后,以0.02 mol/L乙酸铵水溶液(含4%乙腈)和乙腈为流动相,采用Waters Atlantis^® T3 MV Kit色谱柱(250 mm×4.6 mm, 5 μm)分离,配合柱温变化进行梯度洗脱,二极管阵列检测器检测,检测波长为235 nm和280 nm,外标法定量。结果表明,40种染发剂在各自范围内线性关系良好,相关系数均大于0.999; 40种染发剂的检出限为5~168 μg/g,定量限为16~504 μg/g;各染发剂在3个添加水平下的平均回收率为81.4%~109.6%, RSD均小于5%;各染发剂标准溶液在24 h内稳定性良好,RSD为0.2%~2.2%。与现行标准检验方法相比,该方法较大程度地增加了单一液相色谱条件下可测定的染发剂,特别是准用染发剂种类(36种),提高了检测效率,并可保证检测结果的灵敏度与准确性,适用于氧化型染发产品中多种染发剂的检测分析。     

Analysis of VX nerve agent hydrolysis products in wastewater effluents by ion chromatography with amperometric and conductivity detection

An analytical method, based on the use of ion chromatography, was developed to monitor the levels of three regulated VX hydrolysis products in the effluent from a biological wastewater treatment process--ethylmethylphosphonic acid, methylphosphonic acid and 2-(diisopropyl)aminoethanethiol. Previous methods have not been applied to wastewater matrices or 2-(diisopropyl)aminoethanethiol. Despite the specificity and sensitivity constraints of this method, it was possible to measure the compounds in bioreactor effluents down to a level substantially below the US Army discharge limit of 0.1% (w/v). Analytical data was confirmed by liquid chromatography-mass spectrometry (LC-MS) at an independent laboratory.     

Molecularly imprinted solid‐phase extraction coupled with ultra high performance liquid chromatography and fluorescence detection for the determination of estrogens and their metabolites in wastewater

Estrogens are an important class of endocrine‐disrupting compounds, and their contamination of environmental waters through the effluents of wastewater treatment plants could have an important impact on aquatic biota, even at low concentrations. For this reason, the development of selective and sensitive extraction methodologies, which permit the identification and quantification of these compounds at trace level concentrations, is very important. In this study, a quantitative method based on molecularly imprinted solid phase extraction coupled to ultra high performance liquid chromatography with fluorescence detection has been developed. It has been used for the simultaneous determination of three estrogens and two of their metabolites in water samples from wastewater treatment plants. The method developed presents satisfactory limits of detection (between 0.18 and 0.45 ng·mL^?1), good recoveries (higher than 60%) and low relative standard deviations (under 10%). The method was used to analyze wastewater from a veterinary hospital as well as influent and effluent samples of a wastewater treatment plant of Gran Canaria (Spain) The concentrations of the detected hormones ranged from 1.35 to 2.57 ng·mL^?1.     

Treatment of colored effluent of the textile industry in Bangladesh using zinc chloride treated indigenous activated carbons

The adsorption of colored compounds from the textile dyeing effluents of Bangladesh on granulated activated carbons produced from indigenous vegetable sources by chemical activation with zinc chloride was studied. The most important parameters in chemical activation were found be the chemical ratio of ZnCl₂ to feed (3:1), carbonization temperature (450-465 °C) and activation time (80 min). The adsorbances at 511 nm (red effluent) and 615 nm (blue effluent) were used for color estimation. It is established that at optimum temperature (50 °C), time of contact (30-40 min) and adsorbent loading (2 g l⁻¹), activated carbons developed from Segun saw-dust and water hyacinth showed substantial capability to remove coloring materials from the effluents. It is observed that adsorption of reactive dyes by all sorts of activated carbons is higher than disperse dyes. It is explained that activated carbon, because of its acidic nature, can better adsorb reactive dye particles containing large number of nitrogen sites and -SO₃Na group in their structure. The use of carbons would be economical, as saw-dust and water hyacinth are waste products and abundant in Bangladesh.     

Development of a multi-residue method for the determination of organic micropollutants in water, sediment and mussels using gas chromatography-tandem mass spectrometry

This study describes the development of a multiresidue method based on gas chromatography-electron ionization-tandem mass spectrometry (GC-EI-MS/MS) for the detection of sixteen polycyclic aromatic hydrocarbons (PAHs), five phthalate esters (PEs), seven polychlorinated biphenyls (PCBs), six polybrominated diphenyl ethers (PBDEs), six alkylphenols (APs), three organochlorined pesticides and their isomers or degradation products (OCPs) and bisphenol A in seawater, river water, wastewater treatment plant (WWTP) effluents, sediments and mussels. Solid phase extraction (SPE) was used for the extraction of target analytes in aqueous samples, and ultrasound assisted extraction for solid samples. GC-EI-MS/MS acquisition conditions in selected reaction monitoring (SRM) using two transitions per compound were optimized. In this way, quantification and unequivocal identification of organic micropollutants were performed in compliance with the Decision 2002/657/EC. Good linearity responses with coefficients of determination higher than 0.99 were obtained. Methodological detection limits (MDLs) in seawater ranged from 0.1 to 6 ng L(-1); in river water from 0.1 to 4.8 ng L(-1); in WWTP effluents from 1 to 75 ng L(-1); in sediments from 1 to 150 ng g(-1) and in mussels from 1 to 125 ng g(-1). MDLs and recovery yields were compared with other published methods and similarities or even improvements were achieved. The optimized method was applied to analyze five samples from each matrix collected in coastal areas, showing its potential use for marine pollution monitoring.     

Quantification of human pharmaceuticals in water samples by high performance liquid chromatography-tandem mass spectrometry

An improved analytical method for determination of human pharmaceuticals in natural and wastewaters with ng L⁻¹ sensitivity is presented. The method is applicable to pharmaceuticals from a wide range of therapeutic classes including antibiotics, analgesics, anti-inflammatories and anti-cancer compounds. Pharmaceuticals were extracted from waters using solid-phase extraction, and after concentration, analysed by high performance liquid chromatography with tandem mass spectrometric detection (HPLC-MS/MS). Identification of each compound was secured using retention time and by the selected reaction monitoring of two transitions, one of which was additionally used for quantification. Limits of detection ranged from 0.03 to 0.96 ng L⁻¹ and were up to two orders of magnitude lower than those of previously published methods. The method was validated using spiked samples prepared from tap, river and sea water as well as wastewater effluents, collected from the North of Scotland. Analysis of wastewater effluents revealed the presence of mefenamic acid, ibuprofen, erythromycin, diclofenac and trimethoprim. None of the selected pharmaceuticals were detected in river, tap or sea water samples.     

A biosorption isotherm model for the removal of reactive azo dyes by inactivated mycelia of Cunninghamella elegans UCP542

The biosorption of three reactive azo dyes (red, black and orange II) found in textile effluents by inactive mycelium of Cunninghamella elegans has been investigated. It was found that after 120 hours of contact the adsorption led to 70%, 85%, 93% and 88% removal of reactive orange II, reactive black, reactive red and a mixture of them, respectively. The mycelium surface was found to be selective towards the azo dyes in the following order: reactive red > reactive black > orange II. Dye removal from a mixture solution resulted in 48.4 mg/g retention by mycelium and indicated a competition amongst the dyes for the cellular surface. A Freundlich adsorption isotherm model exhibited a better fit, thus suggesting the presence of heterogeneous binding sites. Electrondense deposits observed on the mycelium ultrastructure suggest that the dyes are mainly retained under the cellular surface of the inactive biomass of C. elegans.     

Cathodic stripping voltammetry of 2,3-dichloroquinoxaline and 1,4-dichlorophthalazine reactive dyes and their hydrolysis products: Reactive Red 41 and Reactive Red 96

Preliminary studies of the feasibility of monitoring by cathodic stripping voltammetry the hydrolysis of two further types of reactive dyes have been made. The azo reduction peak in differential pulse cathodic stripping voltammograms of the 2,3-dichloroquinoxaline reactive dye, Reactive Red 41, and in those of its hydrolysis product are sufficiently separated for the hydrolysis of Reactive Red 41 to be followed using the heights of these peaks. In the case of the 1,4-dichlorophthalazine reactive dye, Reactive Red 96, the azo peaks of the reactive and hydrolysed dyes are too close to be used to monitor the hydrolysis reaction, but peaks associated with reduction of the 1,4-dichlorophthalazine group are present which could be used to monitor the hydrolysis of Reactive Red 96.     

Selective Enrichment of a Methanol-Utilizing Consortium Using Pulp and Paper Mill Waste Streams

Efficient utilization of carbon inputs is critical to the economic viability of the current forest products sector. Input carbon losses occur in various locations within a pulp mill, including losses as volatile organics and wastewater. Opportunities exist to capture this carbon in the form of value-added products such as biodegradable polymers. Waste-activated sludge from a pulp mill wastewater facility was enriched for 80 days for a methanol-utilizing consortium with the goal of using this consortium to produce biopolymers from methanol-rich pulp mill waste streams. Five enrichment conditions were utilized: three high-methanol streams from the kraft mill foul condensate system, one methanol-amended stream from the mill wastewater plant, and one methanol-only enrichment. Enrichment reactors were operated aerobically in sequencing batch mode at neutral pH and 25°C with a hydraulic residence time and a solids retention time of 4 days. Non-enriched waste activated sludge did not consume methanol or reduce chemical oxygen demand. With enrichment, however, the chemical oxygen demand reduction over 24-h feed/decant cycles ranged from 79 to 89%, and methanol concentrations dropped below method detection limits. Neither the non-enriched waste-activated sludge nor any of the enrichment cultures accumulated polyhydroxyalkanoates (PHAs) under conditions of nitrogen sufficiency. Similarly, the non-enriched waste activated sludge did not accumulate PHAs under nitrogen-limited conditions. By contrast, enriched cultures accumulated PHAs to nearly 14% on a dry weight basis under nitrogen-limited conditions. This indicates that selectively enriched pulp mill waste activated sludge can serve as an inoculum for PHA production from methanol-rich pulp mill effluents.     

Trace Determination of Rhodamine B and Rhodamine 6G Dyes in Aqueous Samples by Solid‐phase Extraction and High‐performance Liquid Chromatography Coupled with Fluorescence Detection

A simple and reliable method was developed to detect two basic synthetic dyes, rhodamine B (RB) and rhodamine 6G (R6G), in wastewater and surface water samples by high performance liquid chromatography with fluorescence detection (HPLC‐FLD). These dyes have been reported to be both mutagenic and carcinogenic in various organisms. The contents of these two dyes in water samples were extracted by Oasis HLB solid‐phase extraction (HLB‐SPE), and were then determined by an isocratic HPLC using an Atlantis® T3‐C18 column. Water samples at various pH conditions and the compositions of eluents for SPE were evaluated. The results indicate that the proposed method is precise and sensitive in analyzing these two basic synthetic dyes, and the limits of quantitation were 1.5 ng/L for RB and 0.3 ng/L for R6G in 100 mL of water samples. The recovery of analytes in spiked surface water and municipal wastewater treatment plant (WWTP) effluent samples ranged from 61 to 90% with the precision (RSD) ranging from 2 to 12%. The concentrations of analytes were detected in various water samples ranging from 0.7 to 81 ng/L.     

Adsorption studies on the removal of Vertigo Blue 49 and Orange DNA13 from aqueous solutions using carbon slurry developed from a waste material

Waste material (carbon slurry), from fuel oil-based generators, was used as adsorbent for the removal of two reactive dyes from synthetic textile wastewater. The study describes the results of batch experiments on removal of Vertigo Blue 49 and Orange DNA13 from synthetic textile wastewater onto activated carbon slurry. The utility of waste material in adsorbing reactive dyes from aqueous solutions has been studied as a function of contact time, temperature, pH, and initial dye concentrations by batch experiments. pH 7.0 was found suitable for maximum removal of Vertigo Blue 49 and Orange DNA13. Dye adsorption capacities of carbon slurry for the Vertigo Blue 49 and the Orange DNA13 were 11.57 and 4.54 mg g(-1) adsorbent, respectively. The adsorption isotherms for both dyes were better described by the Langmuir isotherm. Thermodynamic treatment of adsorption data showed an exothermic nature of adsorption with both dyes. The dye uptake process was found to follow second-order kinetics.     

Simultaneous determination of fluoroquinolone, sulfonamide, and trimethoprim antibiotics in wastewater using tandem solid phase extraction and liquid chromatography-electrospray mass spectrometry

A robust and sensitive method for the detection of fluoroquinolones, sulfonamides and trimethoprim has been developed. Wastewater samples were acidified and extracted through an anion-exchange cartridge in tandem with a hydrophilic-lipophilic balance (HLB) cartridge, a procedure that reduced interferences from wastewater organic matter. The extracted antibiotics were analyzed using liquid chromatography electrospray mass spectrometry and selected ion monitoring. Quantification of antibiotics was assessed both by internal standard and standard addition methods. Average recoveries for a range of wastewater matrices were 37 to 129% for a 1 microg/L spiking concentration. The method detection limits (MDLs) of antibiotics in deionized water, final and secondary effluent ranged from 2 to 7 ng/L, from 20 to 50 ng/L, and from 30 to 90 ng/L, respectively. Assessment of matrix interference shows that signal suppression and MDL increases with higher amounts of organic matter in the sample. Analyses of samples from two municipal wastewater treatment plants indicate that ciprofloxacin, ofloxacin, sulfamethoxazole and trimethoprim are present in the secondary effluents at median concentrations of 100-160, 205-305, 395-575, and 40-705 ng/L, respectively.     

Tetracycline antibiotics in hospital and municipal wastewaters: a pilot study in Portugal

This study investigated the occurrence of tetracyclines (TCs), namely minocycline (MIN), TC, and its epimer epitetracycline (ETC), and doxycycline (DC), in four hospital wastewater effluents and its fate in municipal wastewater treatment plants (WWTPs), in Coimbra, Portugal. Analytical determination was carried out by solid-phase extraction followed by liquid chromatography with fluorescence detection. A gradient system with a mobile phase containing oxalic acid 0.02 M and acetonitrile was used. After postcolumn derivatization with magnesium reagent, TCs were detected at λ _exc 386 nm and λ _em 500 nm. The proposed method allowed good sensitivity, accuracy, and precision. LOQs were 0.5 μg l⁻¹ for ETC and TC and 15 and 5 μg l⁻¹ for MIN and DC, respectively. The recovery values ranged between 66.4% and 117.1%, and intraday and interday repeatability was lower than 6.8%. The method was successfully used to determine the presence of the above-mentioned TCs in 24 wastewater composite samples obtained from hospital effluents and from influent and effluent of the WWTP located in Coimbra, Portugal. MIN and TC were found in 41.7% of the samples; ETC and DC were found in 25% and 8.3% of the samples, respectively. The levels found ranged from 6 to 531.7 μg l⁻¹ in hospital effluents, while its concentrations in WWTP ranged from 95.8 to 915.3 μg l⁻¹. A seasonal influence in the concentrations found has also been observed, the levels found in samples collected during spring being higher than those observed in samples collected during autumn; however, these are only preliminary results. The WWTP removal rate ranged between 89.5% and 100%.     

Development and optimization of an analytical method for the determination of Sudan dyes in hot chilli pepper by high-performance liquid chromatography with on-line electrogenerated BrO- -luminol chemiluminescence detection

The determination of four Sudan dyes by means of high-performance liquid chromatography (HPLC) with chemiluminescence (CL) detection was proposed. The method was based on the enhancement effect of Sudan dyes on the chemiluminescence reaction between luminol and BrO-, which was on-line electrogenerated by constant current electrolysis. The separation was carried out on Nucleosil RP-C18 column (250 mm x 4.6 mm i.d., 5 microm, pore size, 100 A) at 35 degrees C. The mobile phase consisted of a V (methanol): V (0.2% aqueous formic acid) = 90:10 solution. At a flow-rate of 1.0 ml min(-1), the total run time was 25 min. The effects of several parameters on the HPLC resolution and CL emission were studied systematically. For the four Sudan dyes, the limits of detection (LOD) at a signal-to-noise of 3 ranged from 4 to 8 microg kg(-1) and the limits of quantification (LOQ) at a signal-to-noise of 10 ranged from 13 to 27 microg kg(-1). The relative standard deviations (RSD) of intra-and inter-day precision were below 4.4%. The average recoveries for all four Sudan dyes (spiked at the levels of 1.0 and 1.5 mg kg(-1)) in chilli tomato sauce and hot chilli pepper ranged from 94% to 105%, and the relative standard deviations of the quantitative results were from 2.5 to 4.2%. The proposed method had been successfully applied to the determination of four Sudan dyes in hot chilli products.     

Chemical cationization of cotton fabric for improved dye uptake

Cotton fabric is usually dyed with reactive dyes. During the dyeing process, a large amount of salt is required to achieve higher exhaustion of the dye from the dyebath onto the fiber. Dyeing of cotton with reactive dyes has a substantial environmental impact due to the discharge of a large volume of highly colored and saline effluents. Chemical cationization allows cotton fibers to be dyed without salt by chemically modifying cellulosic macromolecules to introduce positively charged sites. In this study, cotton fabric was cationized using (3-chloro-2-hydroxylpropyl) trimethyl-ammonium chloride (CHPTAC). Dye uptake was assessed using two reactive dyes, CI Reactive Blue 235 and CI Reactive Blue 19. Dye exhaustion kinetics were determined using a Datacolor-HueMetrix Monitor system. Analysis of variance demonstrated significant effects of CHPTAC concentration and exhaustion time on the percent exhaustion. Color strength at the end of the dyeing cycle was significantly higher for cationized fabrics compared to the control fabric. This work shows that treatment of cotton with CHPTAC enhanced dye uptake properties due to the introduction of cationic sites and resulted in superior dyeing without the addition of salt.