Energy consumption,energy savings,and emission analysis in Malaysian office buildings

This paper is concerned with the estimation of energy use in office buildings in Malaysia and with the energy use of major equipment. Energy intensity (EI) – a measure of a building's energy performance – is estimated for Malaysia and compared with a number of selected countries. Air conditioners are shown to be the major energy users (57%) in office buildings, followed by lighting (19%), lifts and pumps (18%) and other equipment (6%). It is estimated that 77,569 MWh of energy can be saved and a huge reduction of emissions achieved through the application of advance glazing, compact fluorescent lamps (CFL), insulation, housekeeping, and by raising thermostat set point temperature of air conditioners, and reducing EI.     

Artificial neural networks for energy analysis of office buildings with daylighting

An artificial neural network (ANN) model was developed for office buildings with daylighting for subtropical climates. A total of nine variables were used as the input parameters – four variables were related to the external weather conditions (daily average dry-bulb temperature, daily average wet-bulb temperature, daily global solar radiation and daily average clearness index), four for the building envelope designs (solar aperture, daylight aperture, overhang and side-fins projections), and the last variable was day type (i.e. weekdays, Saturdays and Sundays). There were four nodes at the output layer with the estimated daily electricity use for cooling, heating, electric lighting and total building as the output. Building energy simulation using EnergyPlus was conducted to generate daily building energy use database for the training and testing of ANNs. The Nash–Sutcliffe efficiency coefficient for the ANN modelled cooling, heating, electric lighting and total building electricity use was 0.994, 0.940, 0.993, and 0.996, respectively, indicating excellent predictive power. Error analysis showed that lighting electricity use had the smallest errors, from 0.2% under-estimation to 3.6% over-estimation, with the coefficient of variation of the root mean square error ranging from 3% to 5.6%.     

Forecasting uptake of retrofit packages in office building stock under government incentives

As government and industry plan to reduce energy consumption in building stock, there is a need to forecast the uptake of retrofit packages across building stock over time. To address this challenge a diffusion model was set up and applied to office building stock across New South Wales (NSW) in Australia, accommodating a high spatial resolution and temporal capability for projecting uptake of technology packages characterised by multiple variables. Six retrofit packages were set up for the diffusion model, which ranged from inexpensive services and manuals through to mid-priced packages involving energy efficient T5 lighting and solar hot water through to expensive packages such as chilled beams and Solar PV. We evaluated the model using a base case and two policy programs, representing the Green Building Fund and Environmental Upgrade Agreements. These were recent incentive programs funded by the Australian government to accelerate the uptake of retrofit packages, by providing financial support to upfront expenditures and removing barriers to retrofit. By forecasting uptake of each retrofit package to 2032 under each program, we demonstrate how the model can be a valuable resource in tailoring expensive government programs and increasing their effectiveness.     

Quantifying the potential of automated dynamic solar shading in office buildings through integrated simulations of energy and daylight

The façade design is and should be considered a central issue in the design of energy-efficient buildings. That is why dynamic façade components are increasingly used to adapt to both internal and external impacts, and to cope with a reduction in energy consumption and an increase in occupant comfort. To gain a complete picture of any façade’s performance and subsequently carry out a reasonable benchmarking of various façade alternatives, the total energy consumption and indoor environment need to be considered simultaneously. We quantified the potential of dynamic solar shading façade components by using integrated simulations that took energy demand, the indoor air quality, the amount of daylight available, and visual comfort into consideration. Three types of façades were investigated (without solar shading, with fixed solar shading, and with dynamic solar shading), and we simulated them with various window heights and orientations. Their performance was evaluated on the basis of the building’s total energy demand, its energy demand for heating, cooling and lighting, and also its daylight factors. Simulation results comparing the three façade alternatives show potential for significant energy reduction, but greater differences and conflicting tendencies were revealed when the energy needed for heating, cooling and artificial lighting were considered separately. Moreover, the use of dynamic solar shading dramatically improved the amount of daylight available compared to fixed solar shading, which emphasises the need for dynamic and integrated simulations early in the design process to facilitate informed design decisions about the façade.     

A method of identifying and weighting indicators of energy efficiency assessment in Chinese residential buildings

This paper describes a method of identifying and weighting indicators for assessing the energy efficiency of residential buildings in China. A list of indicators of energy efficiency assessment in residential buildings in the hot summer and cold winter zone in China has been proposed, which supplies an important reference for policy makings in energy efficiency assessment in buildings. The research method applies a wide-ranging literature review and a questionnaire survey involving experts in the field. The group analytic hierarchy process (group AHP) has been used to weight the identified indicators. The size of survey samples are sufficient to support the results, which has been validated by consistency estimation. The proposed method could also be extended to develop the weighted indicators for other climate zones in China.     

Impact of energy efficiency measures on the economic value of buildings

A main objective of energy policies is to make all levels of the society, from governments to citizen, interested in increasing the energy efficiency of buildings. One of the most important barriers in implementation of energy policies is that the cost of potential energy savings, typically considered being the only financial benefit, does not sufficiently motivate investments. The target is therefore to identify further possible drivers pushing positive reaction according to energy saving action.The paper discusses whether a market-based instrument, capturing the increase of the economic value of energy efficient buildings, can be also used. Methods that quantify the added value due to energy performance, including recommendations on how they can be incorporated in the financial analysis of investments in weatherization, are developed. By applying the proposed methods, the payback period of investments in energy efficiency measures depends on two factors: potential energy savings and the added value to the property. Case studies on some existing condominiums from Romania are analyzed and provide evidence to the research question.The market sensitivity to energy efficiency measures, the possibility of an intangible added value as well as the impact to financial investment decisions is subsequently in the focus.     

Realisation barriers in energy efficiency projects in Croatian public buildings: a critic overview and proposals

This paper discusses in detail specific barriers to establishing energy efficiency policies in Croatian public buildings that affect the realisation of energy efficiency projects. Barriers were discovered after years of collaboration with public institutions in Croatia, especially at a local level. Although the information presented in this paper relates specifically to the geographical areas of Splitsko- Dalmatinska and Dubrovacko-Neretvanska counties in Croatia, the research can be generalised to the country as a whole. The paper also analyses the important role of the United Nations Development Programme in encouraging proactive energy efficiency policies in public buildings in Croatia. Finally, a new organisational framework is proposed to eliminate existing barriers and to establish a system which will lead to the effective realisation of energy efficiency projects in buildings. The research presented in this paper should also be useful to countries facing similar barriers to energy investments.     

Effectiveness of single and multiple energy retrofit measures on the energy consumption of office buildings

Energy retrofit measures (ERMs) are applied to reduce the energy consumption of buildings. The effectiveness of any ERM depends on many building specific factors, such as location, size, operation, building envelope, electrical, heating, cooling and ventilation system properties. It is common for multiple ERMs to be applied to a building to reduce its energy consumption. However, the reduction in energy consumption when multiple ERMs are applied is not the sum of the impact of individual ERMs. Effectiveness of multiple ERMs depends upon their interactive effects. Using representative office buildings and an energy modelling computer program, the effectiveness of individual and multiple ERM was assessed providing a better understanding of their interactive effects.     

Energy savings of office buildings by the use of semi-transparent solar cells for windows

The study investigated a PV window that consists of a double glazed window with semi-transparent solar cells. The window provides natural light transmission as well as electricity production. The effect of the PV window on energy consumption of office buildings was analyzed in terms of heating and cooling loads, daylighting, and electricity production. The purposes of the study were to find the optimum solar cell transmittance and window to wall ratio (WWR), and to estimate energy savings of the building. A standard floor of an office building was modeled to run computer simulation, and annual energy simulation was performed with EnergyPlus. The results showed that the solar cell transmittance of 40% and WWR of 50% achieved the minimum electricity consumption in the building when artificial lighting was controlled with daylighting. The optimum solar cell transmittance for PV windows in different orientation was also presented. By using the optimum PV window, the electricity consumption was reduced by 55% compared to the single glazed window with WWR of 30% and no lighting control.     

Building energy efficiency in rural China

Rural buildings in China now account for more than half of China's total building energy use. Forty percent of the floorspace in China is in rural villages and towns. Most of these buildings are very energy inefficient, and may struggle to provide for basic needs. They are cold in the winter, and often experience indoor air pollution from fuel use. The Chinese government plans to adopt a voluntary building energy code, or design standard, for rural homes. The goal is to build on China's success with codes in urban areas to improve efficiency and comfort in rural homes. The Chinese government recognizes rural buildings represent a major opportunity for improving national building energy efficiency. The challenges of rural China are also greater than those of urban areas in many ways because of the limited local capacity and low income levels. The Chinese government wants to expand on new programs to subsidize energy efficiency improvements in rural homes to build capacity for larger-scale improvement. This article summarizes the trends and status of rural building energy use in China. It then provides an overview of the new rural building design standard, and describes options and issues to move forward with implementation.     

Final energy use in IEA countries: The role of energy efficiency

Improved energy efficiency is a key policy goal of all International Energy Agency (IEA) member countries, but tracking energy efficiency gains is not straightforward. As part of its contribution to the G8 Gleneagles Plan of Action, the IEA has been developing in-depth indicators—tools that provide data and analysis of energy use and efficiency trends. This paper gives an overview of the IEA indicator methodology and presents examples of how disaggregated indicators can be used to identify the factors that drive and restrain energy demand at the end-use level. A decomposition approach is also used to separate efficiency effects from the impacts of structure and activity. The results clearly show the important role that energy efficiency has played in shaping trends in final energy use in IEA countries for more than 30 years. However, the analysis also reveals that recent gains in energy efficiency have been much lower than in earlier decades. Accelerating energy efficiency improvements is therefore a crucial challenge for IEA governments and indicators have an important role to play in helping to develop and evaluate the policies that will be required.     

Optimisation of a Swedish district heating system with reduced heat demand due to energy efficiency measures in residential buildings

The development towards more energy efficient buildings, as well as the expansion of district heating (DH) networks, is generally considered to reduce environmental impact. But the combined effect of these two progressions is more controversial. A reduced heat demand (HD) due to higher energy efficiency in buildings might hamper co-production of electricity and DH. In Sweden, co-produced electricity is normally considered to displace electricity from less efficient European condensing power plants. In this study, a potential HD reduction due to energy efficiency measures in the existing building stock in the Swedish city Linköping is calculated. The impact of HD reduction on heat and electricity production in the Linköping DH system is investigated by using the energy system optimisation model MODEST. Energy efficiency measures in buildings reduce seasonal HD variations. Model results show that HD reductions primarily decrease heat-only production. The electricity-to-heat output ratio for the system is increased for HD reductions up to 30%. Local and global CO₂ emissions are reduced. If co-produced electricity replaces electricity from coal-fired condensing power plants, a 20% HD reduction is optimal for decreasing global CO₂ emissions in the analysed DH system.     

The potential for energy efficiency gains in the Canadian commercial building sector: A stochastic frontier study

The achievement of energy efficiency in commercial buildings is a function of the activities undertaken, the technology in place, and the extent to which those technologies are used efficiently. We study the factors that affect efficient energy use in the Canadian commercial sector by applying a stochastic frontier approach to a cross-section of Canadian commercial buildings included in the Commercial and Institutional Building Energy Use Survey (CIBEUS). Structural and climate-control features of the buildings as well as climatic conditions are assumed to determine the location of the frontier, while management-related variables including such factors as ownership type and activities govern whether or not the maximally attainable efficiency along the frontier is achieved. Our results indicate that although, on average, buildings appear to be fairly efficient, certain types of operations are more likely than others to exhibit energy efficiencies that are significantly worse than average. These results, along with those related to the effects of physical characteristics on the stochastic efficiency frontier, suggest that there is scope for focused policy initiatives to increase energy efficiency in this sector.     

Energy-efficiency supervision systems for energy management in large public buildings: Necessary choice for China

Buildings are important contributors to total energy consumption accounting for around 30% of all energy consumed in China. Of this, around two-fifths are consumed within urban homes, one-fifth within public buildings, and two-fifths within rural area. Government office buildings and large-scale public buildings are the dominant energy consumers in cities but their consumption can be largely cut back through improving efficiency. At present, energy management in the large public sector is a particular priority in China. Firstly, this paper discusses how the large public building is defined, and then energy performance in large public buildings is studied. The paper also describes barriers to improving energy efficiency of large public buildings in China and examines the energy-efficiency policies and programs adopted in United States and European Union. The energy-efficiency supervision (EES) systems developed to improve operation and maintenance practices and promote energy efficiency in large public sector are described. The benefits of the EES systems are finally summarized.     

Energy efficient office buildings with passive cooling – Results and experiences from a research and demonstration programme

To gain access to information on energy use in office buildings, the German Federal Ministry for Economy launched an intensive research and demonstration programme in 1995. In advance of the 2002 EU energy performance directive a limited primary energy coefficient of about 100 kW h m⁻² a⁻¹ as a goal for the complete building services technology was postulated (HVAC + lighting) for all demonstration buildings to be supported. A further condition was that active cooling be avoided. Techniques such as natural or mechanical night ventilation or heat removal by slab cooling with vertical ground pipes as well as earth-to-air heat exchangers in the ventilation system were applied. An accompanying research was established to keep track of the results and the lessons learned from about 22 demonstration buildings realized and monitored until the end of 2005. As one outcome this paper summarises the energy performance of a selection of characteristic buildings together with an overview on the summer thermal comfort situations achieved. The research program will proceed during the next five years. Detailed reports and future results may be downloaded from the internet: www.enbau-monitor.de.     

The role of built environment energy efficiency in a sustainable UK energy economy

Energy efficiency in the built environment can make significant contributions to a sustainable energy economy. In order to achieve this, greater public awareness of the importance of energy efficiency is required. In the short term, new efficient domestic appliances, building technologies, legislation quantifying building plant performance, and improved building regulations to include installed plant will be required. Continuing these improvements in the longer term is likely to see the adoption of small-scale renewable technologies embedded in the building fabric. Internet-based energy services could deliver low-cost building energy management and control to the mass market enabling plant to be operated and maintained at optimum performance levels and energy savings quantified. There are many technology options for improved energy performance of the building fabric and energy systems and it is not yet clear which will prove to be the most economic. Therefore, flexibility is needed in legislation and energy-efficiency initiatives.     

Implementing effect of energy efficiency supervision system for government office buildings and large-scale public buildings in China

The Chinese central government released a document to initiate a task of energy efficiency supervision system construction for government office buildings and large-scale public buildings in 2007, which marks the overall start of existing buildings energy efficiency management in China with the government office buildings and large-scale public buildings as a breakthrough. This paper focused on the implementing effect in the demonstration region all over China for less than one year, firstly introduced the target and path of energy efficiency supervision system, then described the achievements and problems during the implementing process in the first demonstration provinces and cities. A certain data from the energy efficiency public notice in some typical demonstration provinces and cities were analyzed statistically. It can be concluded that different functional buildings have different energy consumption and the average energy consumption of large-scale public buildings is too high in China compared with the common public buildings and residential buildings. The obstacles need to be overcome afterward were summarized and the prospects for the future work were also put forward in the end.     

The social return on investment in the energy efficiency of buildings in Germany

The German government has developed a variety of policy instruments intended to reduce national CO₂ emissions. These instruments include a programme administered by KfW bank, which aims at improving the energy efficiency of buildings. It provides attractive credit conditions or subsidies to finance refurbishment measures which improve the energy efficiency of buildings significantly.     

Factors influencing energy efficiency investments in existing Swedish residential buildings

We used the data from a survey conducted in 2008 of 3,000 owners of detached houses to analyse the factors that influence the adoption of investment measures to improve the energy efficiency of their buildings. For the majority of Swedish homeowners, it was important to reduce their household energy use, and most of them undertook no-cost measures as compared to investment measures. Personal attributes such as income, education, age and contextual factors, including age of the house, thermal discomfort, past investment, and perceived energy cost, influence homeowners’ preference for a particular type of energy efficiency measure. The implications for promoting the implementation of energy efficiency investment measures are discussed.