介孔修饰MCM-41负载Pt纳米催化剂高对映选择性催化酮不对称加氢(英文)

Catalysts containing metal nanotubes were prepared by the adsorption of platinum metal nano-tubes onto functionalized and modified silica surfaces(MCM-41 and fumed silica).(3- Chloropro-pyl)trimethoxysilane and cinchonidine were used for functionalization and modification, respec-tively. Potassium chloroplatinate was used as the metal precursor to impregnate platinum metal nanotubes on the pretreated functionalized and modified silica surfaces. The solid catalysts were characterized by ESEM, TEM, EDAX, and XPS. The MCM-41 supported platinum nanotube catalyst showed 98% to ~100% enantioselectivity towards the hydrogenation of a range of pharmaceuti-cally important chemicals such as methyl pyruvate, ethyl pyruvate, and acetophenone with nearly full conversion.     

Modified Mesoporous Silicate MCM-41 for Zinc Ion Adsorption: Synthesis, Characterization and Its Adsorption Behavior

Modified MCM‐41 has been prepared by bi‐functionalization of thiol and amino functional groups onto mesoporous silicate MCM‐41. Elemental analysis (EA), thermogravimetry analysis (TGA) and FTIR techniques were used to quantify the attachment of the thiol and amino functional groups to the mesoporous silicate pore wall. Powder X‐ray diffraction (PXRD) and nitrogen adsorption techniques were used to establish the pore diameter, packing of the pores and specific surface area of the modified mesoporous silicate MCM‐41. Adsorption behavior for 18 metal ions on this sorbent has been studied and discussed. This sorbent has high affinity for zinc ions against amino‐ or thiol‐functionalized MCM‐41 sorbents.     

Synthesis and characterization of indium and thallium immobilized on isonicotinamide‐functionalized mesoporous MCM‐41: Two novel and highly active heterogeneous catalysts for selective oxidation of sulfides and thiols to their corresponding sulfoxides and disulfides

Two highly ordered isonicotinamide (INA)‐functionalized mesoporous MCM‐41 materials supporting indium and thallium (MCM‐41‐INA‐In and MCM‐41‐INA‐Tl) have been developed using a covalent grafting method. A surface functionalization method has been applied to prepare Cl‐modified mesoporous MCM‐41 material. Condensation of this Cl‐functionalized MCM‐41 with INA leads to the formation of MCM‐41‐INA. The reaction of MCM‐41‐INA with In(NO₃)₃ or Tl(NO₃)₃ leads to the formation of MCM‐41‐INA‐In and MCM‐41‐INA‐Tl catalysts. The resulting materials were characterized using various techniques. These MCM‐41‐INA‐In and MCM‐41‐INA‐Tl catalysts show excellent catalytic performance in the selective oxidation of sulfides and thiols to their corresponding sulfoxides and disulfides. Finally, it is found that the anchored indium and thallium do not leach out from the surface of the mesoporous catalysts during reaction and the catalysts can be reused for seven repeat reaction runs without considerable loss of catalytic performance.     

Synthesis of new zirconium complex supported on MCM‐41 and its application as an efficient catalyst for synthesis of sulfides and the oxidation of sulfur containing compounds

In the present work, we report synthesis of new zirconium complex supported on mesoporous silica by anchoring of adenine on the wall of functionalized MCM‐41, then reacted with ZrOCl₂. The resultant MCM‐41‐Adenine‐Zr was characterized by FT‐IR, XRD, TEM, SEM, TGA, EDX, ICP and BET techniques. It was exhibited that the MCM‐41‐Adenine‐Zr can be used as an efficient and thermally stable nanocatalyst for the oxidation of sulfides, oxidative coupling of thiols and synthesis of sulfides. Moreover, this heterogeneous catalyst can be easily recovered from the reaction mixture by simple filtration and reused for several consecutive cycles without noticeable change in its catalytic activity.     

Detailed Structural Characterizations of SBA‐15 and MCM‐41 Mesoporous Silicas on a High‐Resolution Transmission Electron Microscope

Using high‐resolution transmission electronic micrograph (HR‐TEM) observation, one can clearly see the pore geometry of the MCM‐41 and SBA‐15 mesoporous silicas to determine that their pore shapes are hexagonal and round, respectively. With the perpendicular orientations of the nanochannels to the electron beam, parallel line images of the (100) and (110) repeating spacings were observed. In the SBA‐15 mesoporous silicas, there are byproducts of the granular silica and disordered mesostructures, attributed to the weak hydrogen interactions between Pluronic 123 blockcopolymer and the silica species. There are also many different and significant +π disclination defects in SBA‐15 and MCM‐41 surfactant‐silica composites. The SBA‐15 with a thicker silica wall is more stable under irradiation by high‐energy electron beams compared to MCM‐41, which has thinner wall thickness. Some carbon nanostructure impurities were found in some carbon films on the metal grids.     

Thin and surface adhesive ferroelectric poly(vinylidene fluoride) films with β phase‐inducing amino modified porous silica nanofillers

We report an efficient route for ferroelectric polar β phase generation in poly(vinylidene fluoride) (PVDF) through incorporation of amine functionalized, porous silica (MCM‐41 and fumed silica) based nanofillers. These porous highly functionalized surfaces exhibit the efficient secondary interaction with polymer chain via hydrogen bonding. Structural analysis through FTIR, XRD, and TEM confirm high degree of ferroelectric polar β phase generation of PVDF through incorporation of amino modified porous silica nanofillers. Optimized loading (5 wt %) of amine functionalized, porous silica in PVDF matrix enhances relative intensity of β phase up to 75%. Disappearance of spherulite structure of PVDF with amino modified porous silica nanofillers, as confirmed through POM, TEM, SEM and AFM studies also supports the above conclusion. The P‐E hysteresis loop at sweep voltage of ±50 V of a thin PVDF‐amino modified porous nanofiller film shows excellent ferroelectric property with nearly saturated high remnant polarization 2.8 µC.cm^?2 owing to its large proportion of β PVDF, whereas, a nonpolar pure PVDF thin film shows unsaturated hysteresis loop with 0.6 µC.cm^?2 remnant polarization. PVDF films with the nanofillers exhibit strong adhesive strength over different metallic substrates making them have edge over PVDF in various thin film applications. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2401–2411     

Enzyme‐Responsive Intracellular‐Controlled Release Using Silica Mesoporous Nanoparticles Capped with ε‐Poly‐L‐lysine

The synthesis and characterization of two new capped silica mesoporous nanoparticles for controlled delivery purposes are described. Capped hybrid systems consist of MCM‐41 nanoparticles functionalized on the outer surface with polymer ε‐poly‐L ‐lysine by two different anchoring strategies. In both cases, nanoparticles were loaded with model dye molecule [Ru(bipy)₃]²⁺. An anchoring strategy involved the random formation of urea bonds by the treatment of propyl isocyanate‐functionalized MCM‐41 nanoparticles with the lysine amino groups located on the ε‐poly‐L ‐lysine backbone (solid Ru‐rLys‐S1 ). The second strategy involved a specific attachment through the carboxyl terminus of the polypeptide with azidopropyl‐functionalized MCM‐41 nanoparticles (solid Ru‐tLys‐S1 ). Once synthesized, both nanoparticles showed a nearly zero cargo release in water due to the coverage of the nanoparticle surface by polymer ε‐poly‐L ‐lysine. In contrast, a remarkable payload delivery was observed in the presence of proteases due to the hydrolysis of the polymer’s amide bonds. Once chemically characterized, studies of the viability and the lysosomal enzyme‐controlled release of the dye in intracellular media were carried out. Finally, the possibility of using these materials as drug‐delivery systems was tested by preparing the corresponding ε‐poly‐L ‐lysine capped mesoporous silica nanoparticles loaded with cytotoxic drug camptothecin (CPT), CPT‐rLys‐S1 and CPT‐tLys‐S1 . Cellular uptake and cell‐death induction were studied. The efficiency of both nanoparticles as new potential platforms for cancer treatment was demonstrated.     

Polyurethane‐mesoporous silica gas separation membranes

The concept of mixed matrix membrane comprising dispersed inorganic fillers into a polymer media has revealed appealing to tune the gas separation performance. In this work, the membranes were prepared by incorporation of mesoporous silica into polyurethane (PU). Mesoporous silica particles with different pore size and structures, MCM‐41, cubic MCM‐48 and SBA‐16, were synthesized by templating method and functionalized with 3‐aminopropyltriethoxysilane (APTES). High porosity and aminated surface of the mesoporous silica enhance the adhesion of the particles to the PU matrix. The SEM and FTIR results showed strong interactions between the particles and the PU chains. Moreover, the thermal stability of the hybrid PUs improved compared to the pure polymer. Gas transport properties of the membranes were measured for pure CO₂, CH₄, O₂, and N₂ gases at 10 bar and 25°C. The results showed that the gas permeabilities enhanced with increasing in the loading of modified mesoporous silica particles. High porosity and amine‐functionalized particles render opportunities to enhance the gas diffusivity and solubility through the membranes. The enhanced gas transport properties of the mixed matrix membranes reveal the advantages of mesoporous silica to improve the gas permeability (CO₂ permeability up to ~70) without scarifying the gas selectivity (α(CO₂/N₂)~ 30 for 5 wt% SBA‐16 content).     

Biodegradable polyester/modified mesoporous silica composites for effective bone repair with self‐reinforced properties

A series novel composites based on poly(_L‐lactide) (PLLA) oligomer modified mesoporous silica (MCM41) homogeneous dispersed into poly(_L‐lactide‐co‐trimethylene carbonate‐co‐glycolide) (PLTG) terpolymer has been successfully prepared. The structure of PLTG terpolymer was characterized by ¹H NMR. The structure and properties of modified and unmodified MCM41 were attested by Fourier transform infrared spectroscopy (FTIR), thermogravimetric analyzer (TGA), X‐ray diffraction (XRD), N₂ adsorption–desorption, scanning electron microscope (SEM), and transmission electron microscope (TEM), which demonstrated that the MCM41 was successfully grafted by the PLLA oligomer. The effect of different concentration of modified MCM41 in PLTG matrix on thermal properties, mechanical properties, and hydrophilicity was investigated by TGA, differential scanning calorimetry (DSC), mechanical testing, contact angle measurement, and SEM. The results of mechanical tests showed that 5 wt% of modified MCM41 nanoparticles gave rise to optimal reinforcing effect. The tensile strength, Young's modulus, and elongation at break of the PLTG/PLLA‐MCM41 (5%) composites were 33.2 Mpa, 1.58 Gpa, and 268.7%, respectively, which were all higher than the PLTG/MCM41 (5%) composites and pristine PLTG matrix, which were due to good interfacial adhesion between the PLTG matrix and MCM41 nanoparticles. TGA and DSC have shown that 5% modified MCM41 in the PLTG increased the temperature of composite degradation and T_g. Water contact angle measurement showed the hydrophilicity of the composites increases with the increase of modified MCM41 content. The live/dead assay showed that the modified MCM41 existing on the PLTG matrix presents very excellent cytocompatibility. Therefore, the novel composite material represents promising way for bone tissue engineering application.     

Synthesis and Characterization of Amino-functionalized Meso-porous Silicate MCM-41 for Removal of Toxic Metal Ions

Amino-functionalized MCM-41 has been prepared by grafting amino containing functional groups onto mesoporous silicate MCM-41 and characterized by powder X-ray diffraction, N2 adsorption/desorption measurement, SEM, FT-IR, thermogravimetry and elemental analysis to confirm the ordered mesoporous structure and the functionalization of the amino groups. Sorption behavior for 18 metal ions on this sorbent has been studied and discussed.     

A Direct and Rapid Route to Synthesize Pd/Si‐MCM‐41 at Room Temperature

The pure silica mesoporous molecular sieve MCM‐41 was synthesized under hydrothermal conditions. Pd/Si‐MCM‐41 was prepared by the incipient wetness impregnation of pure silica MCM‐41 with mixed solution of PdCl₂, ethanol and CH₂Cl₂. The samples were characterized by x‐ray diffraction (XRD), transmission electron microscopy (TEM), and nitrogen adsorption–desorption isotherms at 77 K. The XRD and TEM results reveal that Pd is actually anchored inside the pores of Si‐MCM‐41 and the Si‐MCM‐41 structure is clearly maintained after impregnation.     

Periodic Mesoporous Organosilicas: A Type of Hybrid Support for Water‐Mediated Reactions

Hybrid mesoporous periodic organosilicas (Ph‐PMOs) with phenylene moieties embedded inside the silica matrix were used as a heterogeneous catalyst for the Ullmann coupling reaction in water. XRD, N₂ sorption, TEM, and solid‐state NMR spectroscopy reveal that mesoporous Ph‐PMO supports and Pd/Ph‐PMO catalysts have highly ordered 2D hexagonal mesostructures and covalently bonded organic–inorganic (all Si atoms bonded with carbon) hybrid frameworks. In the Ullmann coupling reaction of iodobenzene in water, the yield of biphenyl was 94 %, 34 %, 74 % and for palladium‐supported Ph‐PMO, pure silica (MCM‐41), and phenyl‐group‐modified Ph‐MCM‐41 catalysts, respectively. The selectivity toward biphenyl reached 91 % for the coupling of boromobenzene on the Pd/Ph‐PMO catalyst. This value is much higher than that for Pd/Ph‐MCM‐41 (19 %) and Pd/MCM‐41 (0 %), although the conversion of bromobenzene for these two catalysts is similar to that for Pd/Ph‐PMO. The large difference in selectivity can be attributed to surface hydrophobicity, which was evaluated by the adsorption isotherms of water and toluene. Ph‐PMO has the most hydrophobic surface, and in turn selectively adsorbs the reactant haloaryls from aqueous solution. Water transfer inside the mesochannels is thus restricted, and the coupling reaction of bromobenzene is improved.     

Copper(I)‐N2S2‐salen type complex covalently anchored onto MCM‐41 silica: an efficient and reusable catalyst for the A3‐coupling reaction toward propargylamines

The immobilization of copper complexes by covalent anchoring of the ligand on the surface of mesoporous MCM‐41 has been described. Bis[2‐(phenylthio)benzylidene]‐1,2‐ethylenediamine as a new N₂S₂ donor salen‐type ligand was covalently anchored onto nanopores of MCM‐41 coordinated with copper (I) halide. The organic–inorganic hybrid material was achieved readily using 3‐mercaptopropyltrimethoxysilane as a reactive surface modifier. 2‐Nitrobenzaldehyde was reacted smoothly with the thiol moieties in order to form functionalized nanoporous silica with carbaldehyde groups. The resulting supported organic moieties were converted to thiosalen ligand and coordinated with CuX (X = CN, Cl, Br, I). Characterization of the heterogeneous catalyst by X‐ray diffraction, N₂ sorption, FT‐IR, diffuse reflectance UV‐visible and TGA techniques indicated successful grafting of the copper complex inside the nano‐channels of MCM‐41. The heterogenized catalyst was evaluated by the Mannich condensation reaction of aldehydes, amines and alkynes. In this reaction, the corresponding propargylamines were obtained as single products in good to excellent yields. Factors such as reaction temperature, solvent, catalyst loading, leaching and reusability of the catalyst also were discussed. The use of MCM‐41 as support permits an easier separation and recycles with only a marginal decrease in reactivity. Copyright © 2013 John Wiley & Sons, Ltd.     

Silica‐modified Electrodes for Electrochemical Detection of Malachite Green

New silica‐modified glassy carbon electrodes prepared with three different sorts of ordered mesoporous silica (OMS) were characterized and tested for the electrochemical detection of Malachite Green (MG). The electrodes were prepared by drop casting using silica suspensions and, for stability sake, a Nafion coating was deposited on the electrode top by the same technique. Square wave anodic stripping voltammetry was used to investigate the effect of various experimental parameters (deposition time, solution pH, silica type and concentration) on the performance of the modified electrodes. The best electrode (GC/MCM‐41‐NH₂/Nafion) with detection limit 0.36 μM, sensitivity 0.164±0.003 A/M; linear domain 1–6 μM was applied to detect MG in a commercial product commonly used as biocide in aquaria for ornamental fish.     

Phthalhydrazide immobilized on MCM‐41 as a potent and recoverable catalyst for the synthesis of pyrrolo[2,1‐a]isoquinolines

We present a study on the synthesis, characterization, and application of phthalhydrazide‐functionalized MCM‐41 (P‐MCM‐41) as a novel and efficient heterogeneous basic catalyst. The described catalyst was fully characterized via various techniques such as scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X‐ray (EDX), X‐ray diffraction (XRD), and Fourier transform infrared (FT‐IR). P‐MCM‐41 efficiently catalyzed the four‐component reaction of arylaldehydes, Meldrum's acid, alkyl isocyanides, and isoquinoline in CHCl₃ to prepare pyrrolo[2,1‐a]isoquinolines in good yields.     

Polymer Nanocomposites Using Urchin‐Shaped Carbon Nanotube‐Silica Hybrids as Reinforcing Fillers

Summary: Carbon nanotubes (CNTs) have been grown on MCM‐41 supported Fe nanoparticles and the as‐prepared (no further purification) CNT‐silica hybrid was directly incorporated into nylon‐6 (PA6) by simple melt‐compounding. The urchin‐shaped CNT‐silica hybrid filler was observed to be homogeneously dispersed throughout the matrix by scanning electron and transmission electron microscopy. Compared with neat PA6, the tensile modulus and strength of the composite are greatly improved by about 110%, with incorporation of only 1 wt.‐% CNT‐silica filler.

SEM image and schematic representation showing polymer chains wrapping around the urchin‐shaped CNT‐silica hybrid filler.     

Platinum carbonyl derived catalysts on inorganic and organic supports: a comparative study

Fumed silica, silica gel, silica-alumina and cross-linked (5.5%) polystyrene have been functionalized with quaternary ammonium groups and the Chini cluster [Pt₁₂(CO)₂₄]²⁻ has been anchored onto these functionalized materials by ion pairing. A catalyst has also been prepared by the adsorption of Na₂[Pt₁₂(CO)₂₄] on unfunctionalized fumed silica. The catalytic activities of the resultant materials, and that of commercially purchased 5% platinum on alumina have been studied for the hydrogenation of a variety of unsaturated compounds. The substrates studied are: α-acetamidocinnamic acid, cyclohexanone, acetophenone, methyl pyruvate, ethyl acetoacetate, nitrobenzene and benzonitrile. Compared to the polystyrene supported catalyst, the inorganic oxide supported catalysts have higher surface areas and for most of the substrates have notably higher activities. The functionalized fumed silica-based catalyst gives higher conversions than functionalized silica gel and silica-alumina-based catalysts. In the hydrogenation of acetophenone and ethyl acetoacetate, the functionalized fumed silica-based catalyst show superior activity compared to the commercial platinum catalyst, and the catalyst made by conventional adsorption method. In benzonitrile hydrogenation with all the cluster-derived catalysts a hydrazine derivative is selectively formed, but when the commercial platinum catalyst is used benzyl amine is the main product.     

Development of nanomaterial chemosensors for toxic metal ions sensing

Heavy metal ions are harmful to aquatic life and humans owing to their high toxicity and non‐biodegradability, so their removal from wastewater is an important task. Therefore, this work focuses on designing suitable, simple and economical nanosensors to detect and remove these metal ions with high selectivity and sensitivity. Based on this idea, different types of mesoporous materials such as hexagonal SBA‐15, cubic SBA‐16 and spherical MCM‐41, their chloro‐functionalized derivatives, as well as 4‐(4‐nitro‐phenylazo)‐naphthalen‐1‐ol (NPAN) azo dye have been synthesized, with the aim of designing some optical nanosensors for metal ions sensing applications. The mentioned azo dye has been anchored into the chloro‐functionalized mesoporous materials. The designed nanosensors were characterized using scanning and transmission electron microscopy as well as Fourier transform infrared and UV–visible spectral analysis, nitrogen adsorption–desorption isotherms, low‐angle X‐ray diffraction and thermogravimetric analyses. Their optical sensing to various toxic metal ions such as Cd (II), Hg (II), Mn (II), Fe (II), Zn (II) and Pb (II) at different values of pH (1.1, 4.9, 7 and 12) was investigated. The optimization of experimental conditions, including the effect of pH and metal ion concentration, was examined. The experimental results showed that the solution pH had a major impact on metal ion detection. The optical nanosensors respond well to the tested metal ions, as reflected by the enhancement in both absorption and emission spectra upon adding different concentrations of the metal salts and were fully reversible on adding ethylene diamine tetra acetic acid or citric acid to the formed complexes. High values of the binding constants for the designed nanosensors were observed at pHs 7 and 12, confirming the strong chelation of different metals to the nanosensor at these pHs. Also, high binding constants and sensitivity were observed for NPAN‐MCM‐41 as a nanosensor to detect the different metal ions. From the obtained results, we succeeded in transforming the harmful azo dye into an environmentally friendly form via designing of the optical nanosensors used to detect toxic metal ions in wastewater with high sensitivity.     

Immobilization of cerium (IV) and erbium (III) in mesoporous MCM‐41: Two novel and highly active heterogeneous catalysts for the synthesis of 5‐substituted tetrazoles,and chemo‐ and homoselective oxidation of sulfides

Two well‐ordered 2D ‐ hexagonal cerium (IV) and erbium (III) embedded functionalized mesoporous MCM ‐ 41(MCM‐41@Serine/Ce and MCM ‐ 41@Serine/Er) have been developed via functionalization of mesoporous MCM ‐ 41. The surface modification method has been used in the preparation of serine‐grafted MCM ‐ 41 and led to the development of MCM‐41@Serine. The reaction of MCM‐41@Serine with Ce (NH₄)₂(NO₃)₆·2H₂O or ErCl₃·6H₂O in ethanol under reflux led to the organization of MCM‐41@Serine/Ce and MCM‐41@Serine/Er catalysts. The structures of these catalysts were determined using scanning electron microscopy, mapping, energy‐dispersive X‐ray spectroscopy, Fourier transform‐infrared, thermogravimetric analysis, X‐ray diffraction, inductively coupled plasma, and Brunauer–Emmett–Teller analysis. These MCM‐41@Serine/Ce and MCM‐41@Serine/Er catalysts show outstanding catalytic performance in sulfides oxidation and synthesis of 5‐substituted tetrazoles. These catalysts can be recycled for seven repeated reaction runs without showing a considerable decrease in catalytic performance.     

Synthesis and characterization of MCM‐41‐Biurea‐Pd as a heterogeneous nanocatalyst and using its catalytic efficacy in C–C,C–N and C–O coupling reactions

MCM‐41‐Biurea‐Pd is introduced as a new, heterogeneous and reusable catalyst for C–C and C–heteroatom bond formation between various aryl halides, phenols and amines, in the presence of Ph₃SnCl (Stille reaction) in PEG‐400 as a green solvent at room temperature. The structure of the functionalized MCM‐41 was analysed using various techniques.