Influence of Ferrous Sulfate on the Solubility,Partition Coefficient,and Stability of Mycophenolic Acid and the Ester Mycophenolate Mofetil

ABSTRACT

Studies were performed to (1) evaluate whether the presence of iron affected the physicochemical properties of mycophenolate mofetil (MMF) and mycophenolic acid (MPA), and (2) determine whether alteration of these properties was indicative of formation of an MMF–iron complex. The solubility, stability (chemical reactivity), and partitioning properties of MMF and MPA were evaluated over a pH range of 2–7 in the presence and absence of ferrous sulfate. In addition, the solubility and partitioning properties of MMF were assessed after the MMF drug product, CellCept® capsules, was combined with an iron tablet (Fero-Gradumet®, ferrous sulfate, tablets). The results of studies showed that:

• The solubility of MMF in the presence of ferrous sulfate was generally unaffected over a pH range of 2–7; a small increase in solubility was observed in pH 5.2 buffer solution. The solubility of MPA decreased in pH 5.2 and 7.0 buffer solutions.

• Both MMF and MPA were more stable in the presence of ferrous sulfate at pH 2.0; ferrous sulfate had no effect on the stability of MMF and MPA at pH 7.0.

• Overall, the partitioning of MMF and MPA was unaffected by the addition of ferrous sulfate.

• The solubility and partitioning of MMF from CellCept® capsules combined with Fero-Gradumet® (ferrous sulfate) tablets showed a twofold increase in aqueous solubility of MMF as well as increased concentration of MMF in both the n-octanol and aqueous phases, leading to a decrease in the octanol/water partition coefficient due to a reduction in pH of the aqueous phase.

Based on these results, it was concluded that the physicochemical properties of MMF and MPA were generally not affected by the presence of ferrous sulfate. Further, the presence of ferrous sulfate did not suggest the formation of an MMF–iron complex.     

Amorphous azithromycin with improved aqueous solubility and intestinal membrane permeability

Azithromycin (AZM) is a poorly soluble macrolide antibacterial agent. Its low solubility is considered as the major contributing factor to its relatively low oral bioavailability. The aim of this study was to improve the solubility of this active pharmaceutical ingredient (API) by preparing an amorphous form by quench cooling of the melt and to study the influence of the improved solubility on membrane permeability. The amorphous azithromycin (AZM-A) exhibited a significant increase in water solubility when compared to the crystalline azithromycin dihydrate (AZM-DH). The influence that the improved solubility could have on membrane permeability was also studied. The apparent permeability coefficient (P_app) values of AZM-A were statistically significantly higher (p?相似文献   

Nanosponge-based pediatric-controlled release dry suspension of Gabapentin for reconstitution

Abstract

Context: Gabapentin was selected to formulate oral controlled release dry suspension because of short biological half life of 5–7?h and low bioavailability (60%). Gabapentin is a bitter drug so an attempt was made to mask its taste.

Objective: To formulate and evaluate controlled release dry suspension for reconstitution to increase the bioavailability and to control bitter taste of drug.

Materials and methods: Cyclodextrin based nanosponges were synthesized by previously reported melt method. The nanosponge–drug complexes were characterized by FTIR, DSC and PXRD as well as evaluated for taste and saturation solubility. The complexes were coated on Espheres by a suspension layering technique followed by coating with ethyl cellulose and Eudragit RS-100. A dry powder suspension for reconstitution of the microspheres was formulated and evaluated for taste, redispersibility, in vitro dissolution, sedimentation volume, leaching and pharmacokinetics.

Results and discussion: The complexes showed partial entrapment of drug nanocavities. Significant decrease in solubility (25%) was observed in the complexes than pure drug in different media. The microspheres of nanosponge complexes showed desired controlled release profile for 12?h. Insignificant drug leaching was observed in reconstituted suspension during storage for 7 days at 45?°C/75% RH. Nanosponges effectively masked the taste of Gabapentin and the coating polymers provided controlled release of the drug and enhanced taste masking. The results of in vivo studies showed increase in bioavailability of controlled release suspension by 24.09% as compared to pure drug.

Conclusion: The dry powder suspension loaded with microspheres of nanosponges complexes can be proposed as a suitable controlled release drug delivery for Gabapentin.     

Formulation design,in vitro characterizations and anti-malarial investigations of artemether and lumefantrine-entrapped solid lipid microparticles

Context: Poor aqueous solubility of artemether and lumefantrine makes it important to seek better ways of enhancing their oral delivery and bioavailability.

Objective: To formulate and carry out in vitro and anti-malarial pharmacodynamic evaluations of solidified reverse micellar solutions (SRMS)-based solid lipid microparticles (SLMs) of artemether and lumefantrine for oral delivery and improved bioavailability.

Materials and methods: Rational blends of Softisan^®154 and Phospholipon^®90H lipid matrices, and different concentrations of artemether and lumefantrine were used to formulate several batches of SLMs. Drug-free SLMs were also formulated. Morphology, particle size, encapsulation efficiency (EE%) and pH studies were performed. In vitro release studies were performed in alcoholic buffer, simulated gastric fluid (SGF) and simulated intestinal fluid (SIF) without enzymes. Anti-malarial pharmacodynamic studies were conducted in mice.

Results: Stable, smooth and spherical particles with sizes ranging from 4.2?±?0.02 to 9.3?±?0.8?µm were formed. EE% of 92.2–97.3% and 30.2–84.7% and pH of 3.0?±?0.02 to 4.9?±?0.12 and 3.0?±?0.02 to 5.8?±?0.05 were obtained for artemether and lumefantrine SLMs, respectively. Release of 100, 88.28 and 75.49%, as well as 63.26, 34.31 and 56.17% were recorded for artemether and lumefantrine in alcoholic buffer, SGF and SIF, respectively. Pharmacodynamic studies indicated very significant (p?Conclusion: Oral delivery and bioavailability of artemether and lumefantrine could be improved using SRMS-based SLMs.     

In vitro/in silico approach in the development of simvastatin-loaded self-microemulsifying drug delivery systems

Objective: The aims of this study were to formulate simvastatin (SV)-loaded self-microemulsifying drug delivery systems (SMEDDS), and explore the potential of these drug delivery systems to improve SV solubility, and also to identify the optimal place in the gastrointestinal (GI) tract for the release of SV using coupled in vitro/in silico approach.

Significance: In comparison to other published results, this study considered the extensive pre-systemic clearance of SV, which could significantly decrease its systemic and hepatic bioavailability if SV is delivered into the small intestine.

Methods: SV-loaded SMEDDS were formulated using various proportions of oils (PEG 300 oleic glycerides, propylene glycol monocaprylate, propylene glycol monolaurate), surfactant (PEG 400 caprylic/capric glycerides) and cosurfactant (polysorbate 80) and subjected to characterization, and physiologically-based pharmacokinetic (PBPK) modeling.

Results: According to the in vitro results, the selected SMEDDS consisted of 10.0% PEG 300 oleic glycerides, 67.5% PEG 400 caprylic/capric glycerides, and 22.5% polysorbate 80. The use of acid-resistant capsules filled with SV-loaded SMEDDS was found helpful in protecting the drug against early degradation in proximal parts of the GI tract, however, in silico simulations indicated that pH-controlled drug release system that dissolve in the distal parts of the intestine might further improve SV bioavailability (up to 7.20%).

Conclusion: The obtained results suggested that combined strategy for the improvement of SV bioavailability should comprise solubility enhancement and delayed drug release. The developed SV-specific PBPK model could potentially be used to assess the influence of formulation factors on drug absorption and disposition when developing SV oral dosage forms.     

Comparative evaluation of in vitro efficacy of colesevelam hydrochloride tablets

Context: Colesevelam hydrochloride is used as an adjunct to diet and exercise to reduce elevated low-density lipoprotein (LDL) cholesterol in patients with primary hyperlipidemia as well as to improve glycemic control in patients with type 2 diabetes. This is likely to result in submission of abbreviated new drug applications (ANDA).

Objective: This study was conducted to compare the efficacy of two tablet products of colesevelam hydrochloride based on the in vitro binding of bile acid sodium salts of glycocholic acid (GC), glycochenodeoxycholic acid (GCDA) and taurodeoxycholic acid (TDCA).

Methods: Kinetic binding study was carried out with constant initial bile salt concentrations as a function of time. Equilibrium binding studies were conducted under conditions of constant incubation time and varying initial concentrations of bile acid sodium salts. The unbound concentration of bile salts was determined in the samples of these studies. Langmuir equation was utilized to calculate the binding constants k₁ and k₂.

Results: The amount of the three bile salts bound to both the products reached equilibrium at 3?h. The similarity factor (f₂) was 99.5 based on the binding profile of total bile salts to the test and reference colesevelam tablets as a function of time. The 90% confidence interval for the test to reference ratio of k₂ values were 96.06–112.07 which is within the acceptance criteria of 80–120%.

Conclusion: It is concluded from the results that the test and reference tablets of colesevelam hydrochloride showed a similar in vitro binding profile and capacity to bile salts.     

Formulation Studies on [2-amino-5-bromo-phenyl-4(3)-pyrimidinone] (ABPP), an Interferon Inducer. Anti-Cancerogenic Agent

The apparent solubility of ABPP in aqueous solutions suitable for intravenous use was increased by cosolvent systems.

The solubility of ABPP was determined as a function of pH and concentration of NaOH, NaCl, Na₂CO₃ and co-solvents. Partition coefficient of ABPP in Octanol/water systems were also determined at various pH values. Solubility data and spectrophotemetric methods were used to determine the pKa values. The solubility of the compound increased at lower and higher pHs with increasing NaOH and Na₂CO₃ concentrations and increasing PEG 400, Propylene glycol, dimethylformamide and dimethylacetamide concentrations but decreased with the introduction of NaCl to the solution. The apparent partition coefficient of ABPP showed similar but reversed dependence to the pH of the buffer system.

From these results, suitable formulations for use as parenteral solutions are proposed. The increase in the apparent aqueous solubility of ABPP in such formulations my increase up to 800-fold, depending upon the pH and solvent concentrations. The compound was found to be stable for at least 6 months (experimental period) under normal shelf conditions when formulated for i. v. administration. When the suggested formulation injected intravenously into rabbits, at three different dose levels, the elimination half life of ABPP appeared not be dose dependent although data showed a straight line relationship between the area under the curve and dose and Cpmax ad dose.     

Phospholipid complex as an approach for bioavailability enhancement of echinacoside

Context: Echinacoside (ECH) has been shown to possess a multitude of pharmacological activities, however, oral administered ECH failed to fulfill its therapeutic potential due to poor absorption and low bioavailability. Thus, there is a pressing need to develop a new oral dosage form to enhance its intestinal absorption and improve bioavailability.

Objective: The aim of this study was to formulate ECH into phospholipid complex (phytosome, PHY) to enhance intestinal absorption and oral bioavailability of ECH in vivo.

Methods: The PHY was prepared by a solvent evaporation method and was characterized by differential scanning calorimetry (DSC) and infrared spectroscopy (IR), and then the physicochemical properties, intestinal absorption and bioavailability of the PHY were investigated.

Results: Compared with the physical mixture (MIX) or ECH alone, the n-octanol/water partition coefficient (P) determination results showed that the lipophilicity of ECH was significantly enhanced by formation of PHY. Accordingly, the intestinal absorption rate (K_a) was improved to 2.82-fold and the effective permeability coefficient (P_eff) increased to 3.39-fold. The concentrations of ECH in rat plasma at different times after oral administration of PHY were determined by HPLC. Pharmacokinetic parameters of the PHY in rats were T_max?=?1.500?h, C_max?=?3.170?mg/mL, AUC_0–∞?=?9.375?mg/L?h and AUC_0–24?=?7.712?mg/L?h, respectively.

Conclusions: Compared with ECH alone or the MIX group, the relative bioavailability of ECH was increased significantly after formulation into PHY (p?相似文献   

Inclusion complexes of bendamustine with β-CD,HP-β-CD and Epi-β-CD: in-vitro and in-vivo evaluation

Abstract

The objective of the present work was to investigate the inclusion behavior of bendamustine (BM) with β-cyclodextrin and its hydrophilic derivatives (HP-β-CD and Epi-β-CD) for the enhancement of aqueous solubility, dissolution and bioavailability. The supramolecular binary complexes were prepared by three different methods, viz. physical mixture (PM), kneading (KND) and co-evaporation (COE). Phase-solubility study revealed the higher solubilizing and complexing ability of polymerized cyclodextrin (K_s?=?645?M^?1) than parent cyclodextrin (K_s?=?43?M^?1) and chemically derived cyclodextrin (K_s?=?100?M^?1). Meanwhile, the solubility of BM was significantly enhanced in phosphate buffer of pH 6.8, which was 24.5 folds greater compared with the phosphate buffer pH 4.5 and four times greater than aqueous medium. The dissolution efficiency was found to be highest for BM: Epi-β-CD complex (87%) compared to BM: HP-β-CD complex (84%), BM: β-CD (79%) and pure drug (20%). In-vivo pharmacokinetic study revealed that the bioavailability of BM was enhanced 2.55 times on complexation with Epi-β-CD using KND method. The t_1/2 of BM was increased from 34.2?min to approximately 75.7?min, allowing the absorption for longer time. The order of increase in solubility, dissolution and bioavailability of BM was KND?>?COE?>?PM?>?pure drug. Thus, the strategy of host–guest inclusion was very effective and could be successfully used in the development of suitable pharmaceutical dosage form with enhanced therapeutic activity.     

Influence of Bile Salts on the Permeability Through the Nasal Mucosa of Rabbits of Insulin in Comparison with Dextran Derivatives

Abstract

The nasal drug absorption and the effect of absorption promoters have been studied in rabbits. Nasal mucosa excised from rabbits was mounted as a flat sheet in an in vitro chamber. The result indicates that the change in the porosity of the membrane by pretreatment with bile salts increased the permeability coefficient of sodium chloride in the nasal membrane. The permeabilities of dextran derivatives were enhanced by pretreatment with sodium glycocholate (GC). The permeability coefficient (P) of fluorescein isothiocyanate diethylaminoethyl dextran     

Development of a Multiple Unit Pellet Formulation for a Weakly Basic Drug

ABSTRACT

SAG/ZK [3-(5-Chloro-2-{2-[(2R)-4-(4-fluorobenzyl)-2-methylpiperazin-1-yl]-2-oxoethoxy}phenyl)uronium hydrogen sulfate], a potent candidate for the oral treatment of inflammatory diseases, demonstrated pH-dependent solubility. Drug release from conventional pellet formulations decreased with increasing pH values of the dissolution medium. The aim of this study was to overcome this problem and to achieve pH-independent drug release. Extended release pellets were prepared by extrusion/spheronization followed by film coating with an aqueous polyvinylacetate/polyvinylpyrrolidone dispersion. To overcome the problem of pH-dependent drug release organic acids such as fumaric, tartaric, and adipic acid were incorporated into the core pellets. X-ray diffraction studies were done in order to investigate potential recrystallization and formation of different salts of SAG/ZK. The addition of fumaric acid was found to lower the pH values within the core pellets during the release of SAG/ZK in phosphate buffer pH 6.8. Therefore, increased release rates at higher pH values were observed thus leading to pH-independent drug release. In contrast, drug release remained pH-dependent for pellets containing tartaric and adipic acid, which can be explained with the lower acidic strength and higher aqueous solubility of these acids. X-ray diffraction studies showed no recrystallization and formation of salts of active ingredient and organic acid.     

Preparation and Characterization of Albendazole β-Cyclodextrin Complexes

Albendazole (ABZ), mebendazole (MBZ), and ricobendazole (RBZ) are low-soluble anthelmintic benzimidazole carbamate drugs. To increase their aqueous solubility, three different types of β-cyclodextrins (CyDs): β-cyclodextrin (CD), hydroxypropyl-β-cyclodextrin (HPCD), and methyl-β-cyclodextrin (MCD) were used. Solubility depended on the type of CyDs. Increased solubility was obtained when the more substituted CyDs (HPCD or MCD) were used instead of nonsubstituted CD. Stability constants were calculated assuming a 1:1 stoichiometry. Calculated stability constant values depended on initial solubility of drug and pH of the medium. Solid ABZ complexes were prepared by coprecipitation and freeze-drying methods. These products were compared with physical mixtures of ABZ and CyDs. The characterization of these products was made by differential scanning calorimetry (DSC) and drug release studies. True inclusion complexes were obtained only by the freeze-drying method. Drug release studies showed that the freeze-dried inclusion complexes increased the solubility rate of ABZ, although a supersaturation effect was observed when drug release studies were performed in nonsink conditions. A bioavailability study on mice was done with a formulation of ABZ : HPCD complex and was compared to a conventional ABZ suspension. A significantly (p <. 05) shorter T_max of absorption was obtained by using the complex formulation. Greater and significant (p <. 05) differences for AUC and C_max were observed.     

Preparation,Characterization, and Bioavailability of Ursodeoxycholic Acid–Phospholipid Complex In Vivo

The aim of this study was to prepare ursodeoxycholic acid–phospholipid complex (UDCA-PLC) to enhance oral bioavailability of UDCA, and the physicochemical properties of the complex were studied. Compared with those of UDCA tablet after oral administration in rats, the main pharmacokinetic characteristics and bioavailability of UDCA-PLC orally administered were evaluated. Tetrahydrofuran was used as a reaction medium, UDCA and phospholipids were resolved into the medium, and UDCA-PLC was formed after the organic solvent was evaporated off under vacuum condition. The physicochemical properties of the complex were evaluated using scanning electron microscopy (SEM), transmission electron microscopy (TEM), differential scanning calorimetry (DSC), X-ray diffraction, particle size distribution analysis, and n-octanol/water partition coefficient (P) study. The blood concentrations of UDCA-PLC and UDCA tablet at different time points after oral administration in rats were assayed by high-performance liquid chromatography (HPLC) after derivatization. The pharmacokinetic parameters were computed by software program 3p87. The X-ray diffraction and DSC studies showed that UDCA and phospholipids in the UDCA-PLC were combined by noncovalent bond, not forming a new compound, and n-octanol/water partition coefficient (P) of UDCA-PLC was effectively enhanced. The mean serum concentration–time curves of UDCA after oral administration of UDCA-PLC and UDCA tablet in rats were both in accordance with open two-compartment model. Pharmacokinetic parameters of UDCA tablet and the PLC in rats were T_max 1.9144 and 1.5610 h, C_max 0.0576 and 0.1346 μg/mL, and AUC_0–∞ 4.736 and 11.437 μg h/mL, respectively. The bioavailability of UDCA in rats was significantly different (p < .05) compared with those of UDCA tablet after administration. The UDCA-PLC would be more prospective formulation in future.     

Solubility and solution stability studies of different amino acid prodrugs of bromhexine

Objective: The aim of the present study was to prepare the amino acid prodrugs of bromhexine hydrochloride to improve its solubility.

Methods: All the prodrugs were synthesized by first reacting bromhexine with tert-butoxycarbonyl (Boc) protected amino acid and then deprotection was carried out by using trifluoroacetic acid. These prodrugs were characterized by their melting points, NMR, mass and FTIR spectroscopy. Solubility and partition coefficient of bromhexine and various prodrugs were determined. The solution stability of various prodrugs was also determined in various buffers of pH ranging from 2 to 10. Degradation rate constants and half-life were also determined at various pH.

Results and discussion: The structures of all the synthesized prodrugs were confirmed by NMR, mass and FTIR spectra. The prodrug 2-N-l-alanyl-bromhexine hydrochloride showed maximum solubility and minimum partition coefficient value. These prodrugs may hydrolyze by one or more mechanisms. The order of decreasing rates of hydrolysis was 2-N-l-prolyl-bromhexine hydrochloride > 2-N-glycyl-bromhexine hydrochloride > 2-N-l-alanyl-bromhexine hydrochloride. All the prodrugs exhibited maximum stability in the acidic pH range and undergo base catalyzed hydrolysis.

Conclusion: Solubility studies and partition coefficient values indicated that the synthesized prodrug, 2-N-l-alanyl-bromhexine hydrochloride, was least lipophilic as compared to other synthesized prodrugs. Solution stability studies showed that this prodrug undergo minimum hydrolysis at 37°C. So, it is concluded that 2-N-l-alanyl-bromhexine hydrochloride exhibits better solubility and stability as compared to other synthesized prodrugs.     

Enhancement of oral bioavailability of anti-HIV drug rilpivirine HCl through nanosponge formulation*

Objective: To synthesize β cyclodextrin nanosponges using a novel and efficient microwave mediated method for enhancing bioavailability of Rilpivirine HCl (RLP).

Significance: Belonging to BCS class II RLP has pH dependent solubility and poor oral bioavailability. However, a fatty meal enhances its absorption hence the therapy indicates that the dosage form be consumed with a meal. But then it becomes tedious and inconvenient to continue the therapy for years with having to face the associated gastric side effects such as nausea.

Method: Microwave synthesizer was used to mediate the poly-condensation reaction between β-cyclodextrin and cross-linker diphenylcarbonate. Critical parameters selected were polymer to cross-linker ratio, Watt power, reaction time and solvent volume. Characterization studies were performed using FTIR, DSC, SEM, ¹H-NMR and PXRD. Molecular modeling was applied to confirm the possibility of drug entrapment. In vitro drug dissolution followed by oral bioavailability studies was performed in Sprawley rats. Samples were analyzed using HPLC.

Results: Microwave synthesis yields para-crystalline, porous nanosponges (～205?nm). Drug entrapment led to enhancement of solubility and a two-fold increase in drug dissolution (P?C_max and AUC_0-∞ increases significantly (C_max of NS～ 586?±?5.91?ng/mL; plain RLP ～310?±?5. 74?ng/mL).

Conclusion: The approach offers a comfortable dosing zone for AIDs patients, negating the requirement of consuming the formulation in a fed state due to enhancement in drugs’ oral bioavailability.     

Potentials of proniosomes for improving the oral bioavailability of poorly water-soluble drugs

Objective: The objectives of this study were, first, to develop a free-flowing and stable proniosome formulation for poorly water-soluble drugs such as vinpocetine; and second, to estimate its bioavailability as oral drug delivery system.

Methods: The proniosomes consisting of span60, cholesterol, sorbitol and vinpocetine were prepared by a novel approach. After the proniosomes were contacted with water, the suspension of vinpocetine-loaded niosomes formed automatically. The proniosomes and reconstituted niosomes were evaluated for their physicochemical characteristics, in vitro drug dissolution and release, integrity and stability at different GI tract pH conditions, in situ single-pass intestinal perfusion and in vivo bioavailability.

Results: The proniosome powder exhibited excellent flowability. The reconstituted niosomes with high drug entrapment efficiency (89.67?±?3.28%) showed spherical morphology with smooth surface under transmission electron microscope (TEM). X-ray diffraction (XRD) indicated that the drug was in an amorphous or molecular state in proniosome powder. In vitro dissolution and release study, proniosomes did enhance the dissolution and release rate compared to vinpocetine suspension in phosphate buffer solution (pH 7.2). Proniosome-derived niosomes could keep their integrity and stability at different GI tract pH conditions. The in situ single-pass intestinal perfusion indicated that encapsulation of vinpocetine into niosomes could largely improved the absorption of vinpocetine. The AUC(0?∞) of F2 and F3 was about 4.0- and 4.9-fold higher than that of the vinpocetine suspension, respectively. The results demonstrated the proniosomes indeed remarkably enhanced the oral bioavailability of vinpocetine.

Conclusion: This study suggested the potential of proniosomes as stable precursors for the immediate preparation of niosome carrier systems.     

Amorphous nanoparticle complex of perphenazine and dextran sulfate as a new solubility enhancement strategy of antipsychotic perphenazine

Objective: The objective of this study is to develop a new solubility enhancement strategy of antipsychotic drug – perphenazine (PPZ) – in the form of its amorphous nanoparticle complex (or nanoplex) with polyelectrolyte dextran sulfate (DXT).

Significance: Poor bioavailability of PPZ necessitated the development of fast-dissolving PPZ formulations regardless of delivery routes. Existing fast-dissolving formulations, however, exhibited low PPZ payload. The high-payload PPZ-DXT nanoplex represents an attractive fast-dissolving formulation, as dissolution rate is known to be proportional to payload.

Methods: The nanoplex was prepared by electrostatically driven complexation between PPZ and DXT in a simple process that involved only ambient mixing of PPZ and DXT solutions. We investigated the effects of key variables in drug-polyelectrolyte complexation (i.e. pH and charge ratio R_DXT/PPZ) on the physical characteristics and preparation efficiency of the nanoplex produced. Subsequently, we characterized the colloidal and amorphous state stabilities, dissolution enhancement, and supersaturation generation of the nanoplex prepared at the optimal condition.

Results: The physical characteristics of nanoplex were governed by R_DXT/PPZ, while the preparation efficiency was governed by the preparation pH. Nanoplex having size of ≈80?nm, zeta potential of ≈(-) 60?mV, and payload of ≈70% (w/w) were prepared at nearly 90% PPZ utilization rate and ≈60% yield. The nanoplex exhibited superior dissolution than native PPZ in simulated intestinal juice, resulting in high and prolonged apparent solubility with good storage stabilities.

Conclusions: The simple yet efficient preparation, excellent physical characteristics, fast dissolution, and high apparent solubility exhibited by the PPZ-DXT nanoplex established its potential as a new bioavailability enhancement strategy of PPZ.     

The delivery of arbidol by salt engineering: synthesis,physicochemical properties and pharmacokinetics

Abstract

The aim of the present study was to evaluate the feasibility of using the methanesulfonic salt of arbidol in order to improve its aqueous solubility and thus oral bioavailability. Arbidol mesylate (AM) was synthesized and then characterized using nuclear magnetic resonance spectroscopy (NMR), infrared spectroscopy (IR), powder X-ray diffraction (PXRD), differential scanning calorimetry (DSC) and scanning electron microscopy (SEM), and its apparent solubility and octanol–water partition coefficient were also studied. The results of NMR, IR, PXRD, SEM and DSC tests confirmed the salt formation. The apparent solubility of AM in water was 32-fold higher than that of the commercial product. A superior pH-dependent profile and an improved dissolution rate of AM were obtained in a variety of solutions with different pH values. In addition, AM exhibited a relatively higher peak plasma concentration (1460 versus 1297?ng/mL) and an increased AUC_0–t (2475 versus 1277?ng/mL?×?h) when comparing with the commercial product, indicating the improved bioavailability of the drug. This study suggests that AM may be able to improve the therapeutic efficacy of arbidol, which rendering it to be a promising candidate for further development.     

Development and evaluation of orally disintegrating tablets of cilostazol-β-cyclodextrin inclusion complexes

Context: The clinical applications of cilostazol (CLZ) are limited by its low aqueous solubility (<5?µg/ml) and high biovariability.

Objective: The aim of this study was to enhance the solubility of CLZ by forming inclusion complexes (ICs) with beta cyclodextrin (β-CD) and formulating them into oral disintegrating tablets.

Methods: Phase solubility study of CLZ with β-CD was performed in water. Job’s plot was constructed to determine the stoichiometry of ICs. ICs, prepared by spray-drying technique, were characterized using Fourier transform infrared spectroscopy, differential scanning calorimetry, hot stage microscopy, powder X-ray diffraction and nuclear magnetic resonance. Molecular modeling studies were performed to understand the mode of interaction of CLZ with β-CD. The formulation process was undertaken using a reproducible design of experiment generated model, attained by variation of diluents and disintegrants at three levels. Tablets were evaluated for drug content, hardness, friability, disintegration time (DT), wetting time (WT) and dissolution profiles.

Results and discussion: Phase solubility studies suggested an A_L type curve with stability constant (K_s) of 922.52?M^?1. Job’s plot revealed 1:2 stoichiometry. All analytical techniques confirmed inclusion complexation. Molecular modeling revealed dispersive van der Waals interaction energy as a major contributor for stabilization of complex. The spray-dried complexes showed higher solubility and faster dissolution compared to plain CLZ. The optimized formulation showed DT of 11.1?±?0.8?s, WT of 8.7?±?0.9?s and almost complete dissolution of CLZ in 15?min.

Conclusion: The prepared tablets with low DT and fast dissolution will prove to be a promising drug delivery system with improved bioavailability and better patient compliance.     

Film Coated Pellets Containing Verapamil Hydrochloride: Enhanced Dissolution into Neutral Medium

Abstract

Weakly basic drugs, such as verapamil hydrochloride, that are poorly soluble in neutral/alkaline medium may have poor oral bioavailability due to reduced solubility in the small intestine and colon. Film coated pellets were prepared using two strategies to enhance drug release at high pH values. Firstly, pellets were coated with Eudragit® RS/hydroxypropyl methylcellulose acetate succinate (HMAS) mixtures in proportions of 10:1 and 10:3, respectively. The enteric polymer, HMAS, would dissolve in medium at pH>6 creating pores through the insoluble Eudragit RS membrane to increase drug release. Secondly, an acidic environment was created within the core by the inclusion of fumaric acid at concentrations of 5 and 10% in order to increase drug solubility. Both strategies enhanced drug release into neutral medium in dissolution studies using the pH change method to simulate GIT transit. Dissolution profiles of samples tested in pH 1.2 for 12 hr were compared with those using the pH change method (pH 1.2 for first 1.5 hr, pH raised to 6.8 for remaining 10.5 hr) using the area under the dissolution curve (AUC), the dissolution half-life (t_50%), and the amount of drug released in 3 hr (A_{3 hr}) values. Both strategies enhanced drug release into neutral medium although the strategy using HMAS in the film was more effective. The formulation least affected by pH change was a combination of the two strategies, i.e., pellets containing 5% fumaric acid coated with Eudragit RS 12% w/w and HMAS 1.2% w/w.