戊二醛一步固化法制备氟尿嘧啶壳聚糖微球

以壳聚糖为载体,戊二醛为交联剂,氟尿嘧啶为模型药物,采用一步固化法制备氟尿嘧啶壳聚糖微球制剂.以外观和包封率为指标优化了处方,并考察了交联剂浓度和交联时间对微球体外释放行为及溶胀度的影响.采用扫描电镜和红外光谱对微球结构进行表征.所得载药微球的载药量和包封率为33.5%、51.2%,平均粒径为(6.8±1.8)μm,30 min 时突释量为33.5%.     

糖类交联明胶微球的制备及其释药特性研究

目的:以生物相容性的糖作交联剂制备明胶药物载体并研究其释药特性。方法:用葡萄糖、葡聚糖、氧化葡萄糖、氧化葡聚糖作交联剂制备明胶盘和微球,测定其溶胀动力学,分别以阿司匹林和牛血清白蛋白为药物模型,紫外分光光度法测定药物包裹率、载药率,并检测明胶微球在模拟体内条件下药物的释放速率。结果:葡萄糖、氧化葡萄糖、葡聚糖、氧化葡聚糖作交联剂制备的凝胶溶胀率分别为204%、246%、166%、233%;4种阿司匹林和牛血清白蛋白明胶微球平均载药率分别为8.73%和4.05%,平均包封率分别为62.55%和31.40%;2h药物释放百分率依次为30%、14%、76%、73%和97.2%、86.6%、60.8%、50.1%。结论:上述4种糖均可以取代化学交联剂制备明胶微球;天然糖交联微球缓释效果优于氧化糖。     

Formulation and in vitro characterization of spray dried microspheres of amoxicillin

The purpose of the present study was to design muco-adhesive chitosan microspheres containing amoxicillin. Chitosan microspheres with a small particle size and good sphericity were prepared by a spray-drying method followed by chemical treatment with a chemical crosslinking agent (glutaraldehyde). Parameters affecting the crosslinking extent of the crosslinking time and the concentration of the crosslinker agent. Crosslinked spray-dried chitosan microspheres were analyzed for their morphological aspects, particle size, drug entrapment efficiency, swelling percent and in vitro drug release. Batch M4 with a drug polymer ratio of 1:2, dissolved in minimum concentration of acetic acid solution treated with glutaraldehyde, was found to be optimal giving controlled drug release for 10 h. It was found that both the increase of glutaraldehyde concentration and crosslinking duration decreased the swelling capacity of chitosan microspheres. This could be directly correlated to drug release from the microspheres.     

Gelatin microspheres crosslinked with D,L-glyceraldehyde as a potential drug delivery system: preparation, characterisation, in vitro and in vivo studies

To overcome the restriction in using crosslinked gelatin in the pharmaceutical field, D,L-glyceraldehyde (GAL), a non-toxic crosslinking agent, was proposed. Gelatin microspheres crosslinked with different concentrations of GAL (0.5, 1 or 2%, w/v) and for different time periods (1 or 24 h) were prepared. The effect of the preparation variables was evaluated analysing the extent of crosslinking, the morphological aspect, the particle size and the swelling behaviour. To evaluate the pharmaceutical properties, an antihypertensive drug, clonidine hydrochloride, was chosen as drug model and loaded into the microspheres. Either the increase of the crosslinker concentration or of the crosslinking time period decreased both the swelling and the in vitro drug release processes of the microspheres. After the subcutaneous injection, the loaded microspheres crosslinked with the lowest GAL concentration (0.5%, w/v) or for the shortest time period (1 h) showed a reduction of systolic blood pressure (SBP) similar to that recorded with a clonidine hydrochloride solution having the same drug concentration. Instead, the microspheres crosslinked for 24 h with concentrations of GAL higher than 0.5% (w/v) produced a more gradual and sustained SBP reduction and the antihypertensive effect was maintained until 52-72 h. The biocompatibility studies showed that the microspheres crosslinked with GAL are well tolerated in vivo. These results suggest the potential application of gelatin microspheres crosslinked with GAL as a suitable drug delivery system for the subcutaneous administration.     

Chitosan-based Floating Microspheres of Trimetazidin Dihydrochloride; Preparation and In vitro Characterization

The aim of present study involves preparation and characterization of floating microspheres using trimetazidin dihydrochloride as a model drug to increase the residence time in the stomach without contact with the mucosa, Floating microspheres were prepared by the capillary extrusion technique using chitosan as polymer and sodium lauryl sulphate as cross linking agent. The surface morphology of the prepared microspheres was characterized by the optical microscopic method. The effect of the stirring rate during preparation, polymer concentration and cross linking concentration on the percent yield, in vitro floating behavior, physical state of the incorporated drug, drug loading and in vitro drug release were studied. The prepared microspheres exhibited prolonged drug release (12 h) and remained buoyant for more than 11 h. The microspheres were found to be regular in shape and highly porous. The trimetazidin dihydrochloride release rate was higher in the case of microspheres prepared at a higher agitation speed and decreased with increasing the polymer and cross linking agent concentration. All formulations demonstrated favorable in vitro floating characteristics. The drug entrapment increased from 65.13 to 85.3% with increasing polymer to drug ratio. Diffusion was found to be the main release mechanism. Thus, the prepared floating microspheres may prove to be potential candidates for multiple-unit delivery devices adaptable to any intragastric conditions.     

Evaluation of ketorolac tromethamine microspheres by chitosan/gelatin B complex coacervation

Microspheres (MS) of Ketorolac Tromethamine (KT) for oral delivery were prepared by complex coacervation (method-1) and simple coacervation (method-2) methods without the use of chemical crossalinking agent (glutaraldehyde) to avoid the toxic reactions and other undesirable effects of the chemical cross-linking agents. Alternatively, ionotropic gelation was employed by using sodium-tripolyphosphate (Na-TPP) as cross linking agent. Chitosan and gelatin B were used as polymer and copolymer respectively. All the prepared microspheres were subjected to various physico-chemical studies, such as drug-polymer compatibility by Thin Layer Chromatography (TLC) and Fourier Transform Infra Red Spectroscopy (FTIR), surface morphology by Scanning Electron Microscopy (SEM), frequency distribution, encapsulation efficiency, in-vitro drug release characteristics and release kinetics. The physical state of drug in the microspheres was determined by Differential Scanning Calorimetry (DSC) and X-ray powder Diffractometry (XRD). TLC and FTIR studies indicated no drug-polymer incompatibility. All the MS showed release of drug by a fickian diffusion mechanism. DSC and XRD analysis indicated that the KT trapped in the microspheres existed in an amorphous or disordered-crystalline status in the polymer matrix. It is possible to design a controlled drug delivery system for the prolonged release of KT, improving therapy by possible reduction of time intervals between administrations.     

The characteristics of betamethasone-loaded chitosan microparticles by spray-drying method

Betamethasone (BTM)-loaded microparticles prepared by a spray drying method using chitosan (CTS) as raw material, type-A gelatin and ethylene oxide-propylene oxide block copolymer (Pluronic F68) as modifiers. The BTM-loaded in varied chitosan/Pluronic F68/gelatin microparticle formulations was investigated. By properly choosing excipient type and concentration a high degree of control was achieved over the physical properties of the BTM-loaded microparticles. Microparticle characteristics (zeta potential, tap density, particle size and yield), loading efficiencies, microparticle morphology and in-vitro release properties were examined. Surface morphological characteristics and surface charges of prepared microparticles were observed by using scanning electron microscopy (SEM) and microelectrophoresis. A SEM micrograph shows that the particle sizes of the varied chitosan composed microparticles ranged from 1.1-4.7 microm and the external surfaces appear smooth. The BTM-loaded microparticles entrapped in the chitosan/Pluronic F68/gelatin microparticles with trapping efficiencies up to 93%, collected yield rate 44%, and mean particle size varied between 1-3 microm, positive surface charge (20-40 mv), and tap densities (0.04-0.40 g/cm3) were obtained. The collected BTM yield and size of particle was increased with increasing BTM-loaded amount but both zeta potential and tap density of the particles decreased with increasing BTM-loaded amount. The in vitro release of BTM showed a dose-dependent burst followed by a slower release phase that was proportional to the drug concentration in the concentration range between 5-30%w/w. The in vitro drug release from the chitosan/Pluronic F68/gelatin 1/0.1/0.4 microspheres had a prolong release pattern. These formulation factors were correlated to particulate characteristics for optimizing BTM microspheres in pulmonary delivery.     

Chitosan based pentazocine microspheres for intranasal systemic delivery: development and biopharmaceutical evaluation

Bioadhesive chitosan microspheres (Ms) of pentazocine (Pz) for intranasal systemic delivery were prepared with the aim of avoiding the first pass effect, and thus improving the bioavailability and achieving sustained and controlled blood level profiles, as an alternative therapy to injection and to obtain improved therapeutic efficacy in the treatment of chronic pain such as cancer, trauma and post-operative pain, etc. The formulation variables were drug loading, polymer concentration, stirring rate during crosslinking and oils. The microspheres (Ms) were subjected to evaluation for physical characteristics, such as particle size, incorporation efficiency, swelling ability, in vitro bioadhesion, in vitro drug release characteristics and in vivo performance in rabbits. Application of in vitro data to various kinetic equations indicated matrix diffusion controlled drug delivery from chitosan Ms. Drug loading, polymer concentration and stirring speed influenced the drug release profiles significantly while oils had negligible effect. In vivo studies indicated significantly improved bioavailability of Pz from Ms with sustained and controlled blood level profiles as compared to i.v., oral and nasal administration of drug solution. Good correlation was observed between in vitro and in vivo data.     

Novel hydrogel microspheres of chitosan and pluronic F-127 for controlled release of 5-fluorouracil

Hydrogel microspheres of chitosan (CS) and Pluronic F127 (PF-127) were prepared by the emulsion-crosslinking method employing glutaraldehyde (GA) as a crosslinker. 5-Fluorouracil (5-FU), an anticancer drug with good water solubility, was encapsulated into hydrogel microspheres. Various formulations were prepared by varying the ratio of CS and PF-127, % drug loading and amount of GA. Microspheres were characterized by Fourier transform infrared (FTIR) spectroscopy to confirm the absence of chemical interactions between drug, polymer and the crosslinking agent. Scanning electron microscopy (SEM) was performed to study the surface morphology of the microspheres. SEM showed that microspheres have smooth shiny surfaces. Particle size, as measured by laser light scattering technique, gave an average size ranging from 110 to 382 microm. Differential scanning calorimetry (DSC) and X-ray diffraction (X-RD) studies were performed to understand the crystalline nature of the drug after encapsulation into hydrogel microspheres. Encapsulation of the drug up to 86% achieved was measured by UV spectroscopy. Equilibrium swelling experiments were performed in distilled water. Diffusion coefficients (D) of water through microspheres were estimated by an empirical equation. In vitro release studies indicated the dependence of release rate on the extent of crosslinking, drug loading and the amount of PF-127 used to produce the microspheres; slow release was extended up to 24 h. The release data were also fitted to an empirical equation to compute the diffusional exponent (n), which indicated that the release mechanism followed the non-Fickian trend.     

Chitosan hydrochloride based microspheres of albendazole for colonic drug delivery

Microspheres of chitosan hydrochloride (CH) were prepared in order to deliver albendazole specifically into the colon. Microspheres were prepared by an emulsion method using different ratios of drug and CH (1:1 to 1:5), agitation speeds (500 to 1500 rpm) and concentrations of glutaraldehyde in toluene as the cross-linking agent (0.25 to 1.0% w/v). The effect of polymer concentration, stirring rate and concentration of cross-linking agent on the particle size and drug loading was studied. With an increase in CH concentration, the average particle size was increased. Increased agitation speed reduced the size of the microspheres but higher agitation speed resulted in irregularly shaped microspheres. Increasing the concentration of cross-linking agent produced more regularly shaped microspheres of smaller size. The drug loading was highest at a drug: CH ratio of 1:3, stirring speed 1000 rpm and 0.75% w/v concentration of cross-linking agent. The effect of CH concentration on in vitro drug release from the microspheres was evaluated in simulated g.i.t fluids. A comparative in vitro drug release study of the optimized formulation was carried out in simulated colonic fluid, with and without 2% rat caecal content. The drug release in 24 h was 48.9% in colonic fluid without rat caecal content, and 76.5% in colonic fluid with rat caecal contents.     

Sodium alginate microspheres of metformin HCl: formulation and in vitro evaluation

Metformin microspheres with sodium alginate alone and in combination with gellan were prepared using an emulsion-cross linking method. The prepared microspheres were evaluated for their physico-chemical characteristics like particle size, morphology using SEM, incorporation efficiency, equilibrium water content (swelling) and in vitro drug release. The effect of various formulation variables like polymer concentration (sodium alginate; and proportion of gellan in microspheres prepared by a combination of sodium alginate and gellan), drug loading, crosslinking agent concentration and cross-linking time on the in vitro dissolution of the prepared microspheres were evaluated. The results showed that both the particle size and the incorporation efficiency were proportional to the polymer concentration. In case of microspheres containing both sodium alginate and gellan, the mean diameter and the incorporation efficiency were higher than the corresponding microspheres containing only alginate, both increasing with an increase in proportion of gellan. The prepared microspheres were found to be discrete and spherical in shape and were successful in sustaining the drug release for 8 hours. Incorporation of gellan caused a significant decrease in drug release. The release followed a biphasic profile, in all cases, characterized by an initial phase of moderate drug release followed by a phase of higher release. Further, the kinetic treatment of the dissolution data revealed the prevalence of matrix diffusion kinetics.     

Optimization of chitosan succinate and chitosan phthalate microspheres for oral delivery of insulin using response surface methodology

In the present study, a Box-Behnken experimental design was employed to statistically optimize the formulation parameters of chitosan phthalate and chitosan succinate microspheres preparation. These microspheres can be useful for oral insulin delivery system. The effects of three parameters namely polymer concentration, stirring speed and cross linking agent were studied. The fitted mathematical model allowed us to plot response surfaces curves and to determine optimal preparation conditions. Results clearly indicated that the crosslinking agent was the main factor influencing the insulin loading and releasing. The in vitro results indicated that chitosan succinate microspheres need high amount of crosslinking agent to control initial burst release compared to chitosan phthalate microspheres. The reason may be attributed that chitosan succinate is more hydrophilic than chitosan phthalate. The relative pharmacological efficacy for chitosan phthalate and chitosan succinate microspheres (18.66 +/- 3.84%, 16.24 +/- 4%) was almost three-fold higher than the efficacy of the oral insulin administration (4.68 +/- 1.52%). These findings suggest that these microspheres are promising carrier for oral insulin delivery system.     

Optimization of Chitosan Succinate and Chitosan Phthalate Microspheres for Oral Delivery of Insulin using Response Surface Methodology

In the present study, a Box-Behnken experimental design was employed to statistically optimize the formulation parameters of chitosan phthalate and chitosan succinate microspheres preparation. These microspheres can be useful for oral insulin delivery system. The effects of three parameters namely polymer concentration, stirring speed and cross linking agent were studied. The fitted mathematical model allowed us to plot response surfaces curves and to determine optimal preparation conditions. Results clearly indicated that the crosslinking agent was the main factor influencing the insulin loading and releasing. The in vitro results indicated that chitosan succinate microspheres need high amount of crosslinking agent to control initial burst release compared to chitosan phthalate microspheres. The reason may be attributed that chitosan succinate is more hydrophilic than chitosan phthalate. The relative pharmacological efficacy for chitosan phthalate and chitosan succinate microspheres (18.66 ± 3.84%, 16.24 ± 4%) was almost three-fold higher than the efficacy of the oral insulin administration (4.68 ± 1.52%). These findings suggest that these microspheres are promising carrier for oral insulin delivery system.     

Novel hydrogel microspheres of chitosan and pluronic F-127 for controlled release of 5-fluorouracil

Hydrogel microspheres of chitosan (CS) and Pluronic F127 (PF-127) were prepared by the emulsion-crosslinking method employing glutaraldehyde (GA) as a crosslinker. 5-Fluorouracil (5-FU), an anticancer drug with good water solubility, was encapsulated into hydrogel microspheres. Various formulations were prepared by varying the ratio of CS and PF-127, % drug loading and amount of GA. Microspheres were characterized by Fourier transform infrared (FTIR) spectroscopy to confirm the absence of chemical interactions between drug, polymer and the crosslinking agent. Scanning electron microscopy (SEM) was performed to study the surface morphology of the microspheres. SEM showed that microspheres have smooth shiny surfaces. Particle size, as measured by laser light scattering technique, gave an average size ranging from 110 to 382?µm. Differential scanning calorimetry (DSC) and X-ray diffraction (X-RD) studies were performed to understand the crystalline nature of the drug after encapsulation into hydrogel microspheres. Encapsulation of the drug up to 86% achieved was measured by UV spectroscopy. Equilibrium swelling experiments were performed in distilled water. Diffusion coefficients (D) of water through microspheres were estimated by an empirical equation. In vitro release studies indicated the dependence of release rate on the extent of crosslinking, drug loading and the amount of PF-127 used to produce the microspheres; slow release was extended up to 24?h. The release data were also fitted to an empirical equation to compute the diffusional exponent (n), which indicated that the release mechanism followed the non-Fickian trend.     

Chitosan-based mucoadhesive microspheres of clarithromycin as a delivery system for antibiotic to stomach

The objective of the present study was to develop chitosan-based mucoadhesive microspheres of clarithromycin to provide prolonged contact time for drug delivery of antibiotics to treat stomach ulcers. Microspheres based mucoadhesive formulation were extensively evaluated and characterized for in vitro performance followed by investigation of in vivo pharmacokinetics in rats. Microspheres were prepared by emulsification technique using glutaraldehyde as a crosslinking agent. Formulation conditions were optimized for percent drug entrapment and mucoadhesion, by varying different formulation and process parameters like drug to polymer ratio, concentration of crosslinking agent and time of crosslinking. Prepared microspheres were evaluated extensively for particle size, percent drug entrapment, swelling kinetics, in vitro mucoadhesion using rat stomach membrane and in vitro drug release studies. In vitro permeation studies across rat stomach membrane were carried out to determine diffusion parameters and drug retention in the stomach membrane of the formulation and the plain drug. Finally in vivo performance of microsphere formulation in comparison to plain drug was evaluated by pharmacokinetic studies in albino rats. Drug entrapment upto 74% was obtained. Swelling studies indicated that with an increase in cross-linking, the swelling ability decreased. The in vitro drug release and in vitro mucoadhesion studies showed a dependence on the extent of cross-linking and concentration of chitosan. Extent of cross-linking exhibited an inverse relation to drug release rate as well as mucoadhesion, whereas polymer concentration exhibited an inverse correlation with drug release while linear relationship with mucoadhesion (up to 86%). In vitro permeation studies across stomach tissue showed higher accumulation of drug in the stomach tissue with microspheres formulation as compared to that of free drug. This is evident from higher value of K (partition coefficient) and Qm/Csf values for microspheres (68.34 and 106.42X10(3), respectively) as compared to that of free drug (1.86 and 173.00, respectively). These findings when analyzed showed an increase in the bioavailability of clarithromycin from microsphere formulation as compared to plain drug suspension in vivo, with AUC 0-->alpha being 91.7 (microg h/ml)and 24.9 (microg h/ml) respectively. Results of the study demonstrated good mucoadhesion of the microspheres with the stomach mucosa as well as higher accumulation of drug in the stomach membrane. Microspheres also exhibited sustained release of drug. Thus chitosan microspheres appear, technically, promising mucoadhesive drug delivery systems for delivering clarithromycin to treat stomach ulcers.     

Development of Biodegradable Starch Microspheres for Intranasal Delivery

Domperidone microspheres for intranasal administration were prepared by emulsification crosslinking technique. Starch a biodegradable polymer was used in preparation of microspheres using epichlorhydrine as cross-linking agent. The formulation variables were drug concentration and polymer concentration and batch of drug free microsphere was prepared for comparisons. All the formulations were evaluated for particle size, morphological characteristics, percentage drug encapsulation, equilibrium swelling degree, percentage mucoadhesion, bioadhesive strength, and in vitro diffusion study using nasal cell. Spherical microspheres were obtained in all batches with mean diameter in the range of above 22.8 to 102.63 μm. They showed good mucoadhesive property and swelling behaviour. The in vitro release was found in the range of 73.11% to 86.21%. Concentration of both polymer and drug affect in vitro release of drug.     

A multiple emulsion method to entrap a lipophilic compound into chitosan microspheres

A new method for preparation of chitosan microspheres loaded with an hydrophobic drug, ketoprofen, was developed. It is an emulsification/solvent evaporation process carried out in mild conditions and particularly useful for microencapsulation of thermally sensitive drugs. This method can be additionally combined to physical and chemical cross-linking in order to modulate drug release. Physical cross-linking was carried out by dry heating chitosan microspheres at fixed temperatures and for different times. Glutaraldehyde at different concentrations was used as the chemical cross-linking agent on microspheres constituted by different theoretical ketoprofen/chitosan ratio (1:2, 1:4, 1:6 w/w). Chitosan microspheres were morphologically characterized for shape, surface characteristics and size distribution; chitosan/ketoprofen interactions inside microspheres were investigated by differential scanning calorimetry and powder X-ray difractometry. Ketoprofen contents inside the microspheres and in vitro drug release profiles were also determined.     

Chitosan microspheres for intrapulmonary administration of moxifloxacin: interaction with biomembrane models and in vitro permeation studies.

Chitosan microspheres loaded moxifloxacin were prepared to obtain sustained release of the drug after intrapulmonary administration. The microspheres were produced by the spray-drying method using glutaraldehyde as the crosslinking agent. The particles were spherical with a smooth but distorted surface morphology and were of small size, ranging from 2.5 to 6.0microm, thus suitable for inhalation. In vitro release studies showed a significant burst effect for all crosslinked systems, followed by a prolonged moxifloxacin release, particularly in the presence of the highest glutaraldehyde concentration. Lipid vesicles made of dipalmitoylphosphatidylcholine (DPPC) were used as an in vitro biomembrane model to evaluate the influence of chitosan microspheres on the interaction of moxifloxacin with biological membranes. Differential scanning calorimetry was used as a simple and non-invasive technique of analysis. Moxifloxacin freely permeates through DPPC liposomes, interacting with the hydrophobic zone of the bilayers (lowering of the DeltaH value and loss of the cooperativity of the main transition peak). Uncrosslinked microspheres rapidly swelled and dissolved releasing free chitosan that was able to interact with liposomes (increase of DeltaH value), probably altering the biomembrane permeability to the drug. Crosslinked microspheres did not show this property. Pulmonary absorption of moxifloxacin-loaded chitosan microspheres was evaluated compared to the free drug. A monolayer of Calu-3 human bronchial epithelial cells mounted on Franz diffusion cells was used as an in vitro bronchial epithelium model. Microspheres retard the absorption of moxifloxacin and within 6h the cumulative amount of permeated drug was about 18%, 11% and 7% (w/w) for free moxifloxacin, moxifloxacin-loaded crosslinked and moxifloxacin-loaded uncrosslinked microspheres, respectively.     

Preparation of gelatin microspheres containing lactic acid--effect of cross-linking on drug release

In this study, gelatin microspheres containing lactic acid were prepared by the polymerization technique using glutaraldehyde as the cross-linking agent. Dried microspheres were loaded by immersing them in an aqueous solution of lactic acid. In order to prepare microspheres with an appropriate drug release profile, the effect of time of cross-linking and the amount of cross-linking agent on the swelling properties of microspheres and their release profile were investigated. The microencapsulation efficiency, microspheres appearance, particle size, swelling ratio and drug release profile were also studied. Microspheres prepared with a larger amount of cross-linking agent, or after longer cross-linking time, showed a reduced swelling ratio in aqueous media. In vitro release pattern of lactic acid from gelatin microspheres showed a biphasic profile and the release rates were reduced upon increasing the amount of cross-liking agent and prolonging the cross-linking time.     

Preparation and Characterization of Oxybenzone-Loaded Gelatin Microspheres for Enhancement of Sunscreening Efficacy

The objective of our present study was to prepare and evaluate gelatin microspheres of oxybenzone to enhance its sunscreening efficacy. The gelatin microspheres of oxybenzone were prepared by emulsion method. Process parameters were analyzed to optimize the formulation. The in vitro drug release study was performed in pH 7.4 using cellulose acetate membrane. Microspheres prepared using oxybenzone:gelatin ratio of 1:6 showed slowest drug release and those prepared with oxybenzone:gelatin ratio of 1:2 showed fastest drug release. The gelatin microspheres of oxybenzone were incorporated in aloe vera gel. Sun exposure method using sodium nitroprusside solution was used for in vitro sunscreen efficacy testing. The formulation C₅ containing oxybenzone-bearing gelatin microspheres in aloe vera gel showed best sunscreen efficacy. The formulations were evaluated for skin irritation test in human volunteers, sun protection factor, and minimum erythema dose in albino rats. These studies revealed that the incorporation of sunscreening agent–loaded microspheres into aloe vera gel greatly increased the efficacy of sunscreen formulation more than four times.