Synthesis of the copolymer hydrogel κ‐carrageenan‐graft‐PAAm: Evaluation of its absorbent and adhesive properties

κ‐Carrageenan‐graft‐PAAm, a copolymer hydrogel of κ‐carrageenan (kC) and acrylamide (AAm), has been synthesized in aqueous medium at ～ pH 7 in the presence of the initiator potassium persulfate (KPS), using microwave irradiation. The reaction conditions were optimized by varying the concentration of AAm and KPS to obtain copolymer hydrogels having different nitrogen contents e.g., %N 6.35, 10.56, and 11.05. It was observed that copolymer hydrogel having %N 11.05 gives superior adhesive properties whereas copolymer hydrogel with %N 10.56 produces superior absorbent properties in the presence of optimized concentrations of AAm (0.87 and 1.1428 mol/L respectively) and KPS (0.022 and 0.0296 mol/L respectively). The product with %N 6.35 is a soft gel (2–5% gel in 1% KCl) exhibiting low gel strength (135 g cm^?2). The one with %N 10.56 showed superior swelling property and maximum swelling was observed in the alkaline pH (22 g/g). The swelling behaviors of the hydrogels were studied at different pHs (pH 1.2–12.5) as well as in 1% aqueous solutions of NaCl, KCl, and CaCl₂. The 5% dispersion of the hydrogel having %N 11.05 in water had good binding properties with papers, polyethylene sheets, and wood pieces. To evaluate the measure of adhesive property, the viscosity and solid and liquid weights of the applied adhesive were measured. Characterization of the copolymer hydrogels was done by TGA, X‐ray diffraction, ¹³C‐NMR, FT‐IR, elemental analyses, and rheological studies. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 5144–5152, 2006     

Preparation and characterization of polysaccaride interpolymer complexes: I‐PVA/ι‐carrageenan

Thermal and spectroscopic charaterization of PVA, iota carrageenan (IC), and their interpolymer complexes were studied in terms of stability, complex formation, and species determination by XRF, FTIR, Raman, DSC, and TGA. Thermogravimetry analysis showed that initial thermal degradation temperature of PVA/IC decreased from 276 to 256°C with an increase of IC content. The complexation of IC to PVA significantly increased, the thermal stability of IC, where as the thermal stability of PVA increased rather insignificantly. Fourier Transform Infrared (FTIR) and Raman spectroscopic results showed that PVA interacted with IC through ? OH groups of PVA and IC as shown by the frequency and scattering shift at ? OH band of FTIR and Raman spectra of each complex. The involvements of ester sulfate and ether groups of IC in interaction were not significant. In the results of the thermal and spectroscopic analysis, 17% content of PVA/IC is the most miscible and intercomplexable weight fraction of PVA/IC. The natural source of IC, which was unknown was characterized by XRF and found to be as potassium salt and Euchema specie of marine red algee of the class Rhodophceae. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

α‐Linolenic acid metabolism in adult humans: the effects of gender and age on conversion to longer‐chain polyunsaturated fatty acids

This review summarises and evaluates current knowledge of α‐linolenic acid (αLNA) metabolism in adult humans. The principal biological role of αLNA appears to be as a precursor for the synthesis of longer‐chain n‐3 polyunsaturated fatty acids (PUFA). Stable isotope tracer studies indicate that conversion of αLNA to eicosapentaenoic acid (EPA) occurs but is limited in men and that further transformation to docosahexaenoic acid (DHA) is very low. A lower proportion of αLNA is used for β‐oxidation in women compared with men, while the fractional conversion to the longer‐chain n‐3 PUFA is greater, possibly due to the regulatory effects of oestrogen. Increasing αLNA intake for a period of weeks results in an increase in the proportion of EPA in plasma lipids, circulating cells and breast milk, but there is no increase in DHA, which may even decline in some pools at high αLNA intakes. Overall, αLNA appears to be a limited source of longer‐chain n‐3 PUFA in man, and so adequate intakes of preformed long‐chain n‐3 PUFA, in particular DHA, may be important for maintaining optimal tissue function. The capacity to up‐regulate αLNA transformation in women may be important for meeting the demands of the foetus and neonate for DHA.     

Synthesis of Valuable Chiral Intermediates by Isolated Ketoreductases: Application in the Synthesis of α‐Alkyl‐β‐hydroxy Ketones and 1,3‐Diols

Regio‐ and stereoselective reductions of α‐substituted 1,3‐diketones to the corresponding β‐keto alcohols or 1,3‐diols by using commercially available ketoreductases (KREDs) are described. A number of α‐monoalkyl‐ or dialkyl‐substituted symmetrical as well as non‐symmetrical diketones were reduced in high optical purities and chemical yields, in one or two enzymatic reduction steps. In most cases, two or even three out of the four possible diastereomers of α‐alkyl‐β‐keto alcohols were synthesized by using different enzymes, and in two examples both ketones were reduced to the 1,3‐diol. By replacing the α‐alkyl substituent with the OAc group, 1‐keto‐2,3‐diols, as well as 1,2,3‐triols were synthesized in high optical purities. These enzymatic reactions provide a simple, highly stereoselective and quantitative method for the synthesis of different diastereomers of valuable chiral synthons from non‐chiral, easily accessible 1,3‐diketones.     

Unsymmetrical α‐diimine nickel (II) complex with rigid bicyclic ring ligand: Synthesis,characterization, and ethylene polymerization in the presence of AlEt2Cl

Unsymmetrical α‐diimine ligand 1 was successfully synthesized via condensation of trimethylaluminum (TMA) metalated 2‐methyl‐6‐isopropyl‐aniline with rigid bicyclic aliphatic diketone camphorquinone. Syn‐ and anti‐stereoisomers were detected by ¹³C NMR in the condensation product. The corresponding α‐diimine nickel (II) complex 1 was prepared from the exchange reaction of (DME)NiBr₂ with the ligand 1 , and displayed high activity for ethylene polymerization in the presence of diethylaluminum chloride (AlEt₂Cl). The resultant polymers were confirmed by gel permeation chromatography and ¹³C NMR characterization to be broad molecular weight distribution polyethylene with various branches, and high degree of branching, even at low polymerization temperature ?10°C. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis of Reactive Sulfur Species in Cultured Vascular Endothelial Cells after Exposure to TGF-β1: Induction of Cystathionine γ-Lyase and Cystathionine β-Synthase Expression Mediated by the ALK5-Smad2/3/4 and ALK5-Smad2/3-ATF4 Pathways

Transforming growth factor-β₁ (TGF-β₁) occurs at high levels at damage sites of vascular endothelial cell layers and regulates the functions of vascular endothelial cells. Reactive sulfur species (RSS), such as cysteine persulfide, glutathione persulfide, and hydrogen persulfide, are cytoprotective factors against electrophiles such as reactive oxygen species and heavy metals. Previously, we reported that sodium trisulfide, a sulfane sulfur donor, promotes vascular endothelial cell proliferation. The objective of the present study was to clarify the regulation and significance of RSS synthesis in vascular endothelial cells after exposure to TGF-β₁. Bovine aortic endothelial cells in a culture system were treated with TGF-β₁ to assess the expression of intracellular RSS, the effect of RSS on cell proliferation in the presence of TGF-β₁, induction of RSS-producing enzymes by TGF-β₁, and intracellular signal pathways that mediate this induction. The results suggest that TGF-β₁ increased intracellular RSS levels to modulate its inhibitory effect on proliferation. The increased production of RSS, probably high-molecular-mass RSS, was due to the induction of cystathionine γ-lyase and cystathionine β-synthase, which are RSS-producing enzymes, and the induction was mediated by the ALK5-Smad2/3/4 and ALK5-Smad2/3-ATF4 pathways in vascular endothelial cells. TGF-β₁ regulates vascular endothelial cell functions such as proliferation and fibrinolytic activity; intracellular high-molecular-mass RSS, which are increased by TGF-β₁, may modulate the regulation activity in vascular endothelial cells.     

Numerical simulation of the dynamic flow behavior in a bubble column: A study of closures for turbulence and interface forces

Numerical simulations of the bubbly flow in two square cross-sectioned bubble columns were conducted with the commercial CFD package CFX-4.4. The effect of the model constant used in the sub-grid scale (SGS) model, C_S, as well as the interfacial closures for the drag, lift and virtual mass forces were investigated. Furthermore, the performance of three models [Pfleger, D., Becker, S., 2001. Modeling and simulation of the dynamic flow behavior in a bubble column. Chemical Engineering Science, 56, 1737-1747; Sato, Y., Sekoguchi, K.,1975. Liquid velocity distribution in two-phase bubble flow. International Journal of Multiphase Flow 2, 79-95; Troshko, A.A., Hassan, Y.A., 2001. A two-equation turbulence model of turbulent bubbly flows. International Journal of Multiphase Flow 27, 1965-2000] to account for the bubble-induced turbulence in the k-ε model was assessed. All simulation results were compared with experimental data for the mean and fluctuating liquid and gas velocities. It is shown that the simulation results with C_S=0.08 and 0.10 agree well with the measurements. When C_S is increased, the effective viscosity increases and subsequently the bubble plume becomes less dynamic. All three bubble-induced turbulence models could produce good solutions for the time-averaged velocity. The models of Troshko and Hassan and Pfleger and Becker reproduce the dynamics of the bubbly flow in a more accurate way than the model of Sato and Sekoguchi. Based on the comparison of the results obtained for two columns with different aspect ratio (H/D=3 and H/D=6), it was found that the model of Pfleger and Becker performs better than the model of Troshko and Hassan, while the model of Sato and Sekoguchi performs the worst. It was observed that the interfacial closure model proposed by Tomiyama [2004. Drag, lift and virtual mass forces acting on a single bubble. Third International Symposium on Two-Phase Flow Modeling and Experimentation, Pisa, Italy, 22-24 September] performs better for the taller column. With the drag coefficient proposed by Tomiyama, the predicted slip velocity agrees well with the experimental data in both columns. The virtual mass force has a small influence on the investigated bubbly flow characteristics. However, the lift force strongly influences the bubble plume dynamics and consequently determines the shape of the vertical velocity profile. In a taller column, the lift coefficient following from the model of Tomiyama produces the best results.