聚合离子液体毛细管气相色谱固定相的性能评价

离子液体作为毛细管气相色谱固定相的选择性和热稳定性是近年人们关注的课题。本文合成了1-烯基-3-苄基咪唑-二(三氟甲基磺酰)亚胺盐(VBIm-NTf2)离子液体并经毛细管柱内聚合制得了聚合离子液体PVBIm-NTf2色谱柱。与VBIm-NTf2色谱柱相比,PVBIm-NTf2色谱柱具有良好的色谱选择性和热稳定性。PVBIm-NTf2色谱柱对Grob试剂、醇混合物、酯混合物和苯系物等都表现了很好的分离能力,并且色谱峰峰形窄且对称。该聚合色谱柱在250 ℃下老化6 h后仍具有良好的分离能力和选择性。本文还测定了PVBIm-NTf2的Abraham溶剂化参数,解析了该固定相与溶质间的相互作用,相关研究国内尚未见报道。研究表明,对常规离子液体进行柱内聚合是改善常规离子液体气相色谱固定相的热稳定性和选择性的有效途径。     

硅烷基咪唑双三氟甲烷磺酰亚胺离子液体气相色谱固定相的性能评价

以双三氟甲烷磺酰亚胺离子([NTf₂]^-)为阴离子,合成阳离子烷基取代不同(C1、C2和C4)的硅烷基咪唑离子液体,以其为固定相制备气相色谱填充柱。 硅烷基咪唑离子液体为强极性固定相;阳离子结构影响固定相的热稳定性、极性和分离性能。 在这些离子液体固定相中,1-丁基-3-[(3-三甲氧基硅基)-丙基]咪唑双三氟甲烷磺酰亚胺([PBIM]NTf₂)对Grob试剂分离性能较好。 利用溶剂化作用参数模型,评价[PBIM]NTf₂固定相特性,研究固定相-组分分子之间相互作用机制;同时考察[PBIM]NTf₂色谱柱对不同类型化合物的分离性能。 结果表明,[PBIM]NTf₂固定相主要作用力是氢键碱性和偶极作用,对烷烃、醇、酯和胺等不同类型的样品组分表现出良好的分离能力。     

CMPO-离子液体萃取分离铀(VI)体系的电化学性质

研究了辛基(苯基)-N,N-二异丁基胺甲酰基甲基氧化膦(CMPO)-离子液体(IL)从硝酸铀酰水溶液中萃取铀(VI)的电化学行为, 离子液体(IL)为1-丁基-3-甲基咪唑双三氟甲基磺酰亚胺盐(C₄mimNTf₂). 用等摩尔系列法测得萃取过程中CMPO与U(VI)形成摩尔比为3:1的配合物. 用循环伏安法研究了萃取液中U(VI)-CMPO配合物的电化学性质, 结果表明, 在C₄mimNTf₂中U(VI)-CMPO 配合物经过准可逆还原生成U(V)-CMPO 配合物, U(VI)/U(V)电对的表观氧化还原电势(E^Θ, vs Fc/Fc⁺)为(?0.885±0.008) V. 对萃取液进行控制电位电解, 发现在铂片上有沉淀析出. X射线光电子能谱(XPS) 测试结果表明, 沉积物中只含有U(VI)、U(IV)和氧, 而CMPO和C₄mimNTf₂没有被夹带析出.     

阳离子取代基对离子液体气相色谱固定相保留性能的影响

以双-三氟甲烷磺酰亚胺离子（［NTf₂］^-）、三氟甲基磺酸根离子（［TFO］^-）和六氟磷酸根离子（［PF₆］^-）为阴离子,合成了含有丙基、丁基、壬基、乙苯基或氰甲基等阳离子取代基的聚合乙烯基咪唑基离子液体固定相,制备了13种离子液体石英毛细管色谱柱。考察了离子液体固定相结构与色谱柱McReynolds常数、热稳定性和测试化合物保留行为之间的构效关系,研究了阳离子取代基对固定相保留性能的影响规律;同时考察了测试化合物保留指数随温度变化的规律。结果表明,所合成的离子液体固定相具有较强的极性,其保留性能不仅与阳离子取代基的性质密切相关,而且受取代基结构和阴离子影响明显;在考察的温度范围内,测试化合物的保留指数变化规律与传统色谱固定相完全相同。     

负载型磺酸化席夫碱二-邻苯甲醛乙二胺(Salen)-Mn(Ⅲ)配合物催化不对称环氧化反应

设计了负载型催化剂/离子液体体系：磺酸化席夫碱二-邻苯甲醛乙二胺(Salen)-Mn(Ⅲ)配合物中5, 5′-磺酸根通过氢键作用分别负载于硅胶和硅藻土,再分散于亲水性离子液体1-正丁基-3-甲基咪唑四氟硼酸盐(BMImBF₄)或憎水性离子液体1-正丁基-3-甲基咪唑六氟磷酸盐(BMImPF₆)中。研究了此催化体系对苯乙烯和α-甲基苯乙烯的不对称环氧化反应,结果表明此体系减少了催化剂的流失,催化体系可循环五次;扩大了手性诱导能力,对映体过量值(ee)可达100%;     

在离子液体中6-羟基-2(1H)喹啉酮的合成及反应性研究

6-羟基-2(1H)-喹啉酮是心血管和降压药物的重要中间体. 设计合成了一种在[Bmim]AlCl₄离子液体中合成6-羟基-2-(1H)-喹啉酮的新方法; 研究了离子液体中6-羟基-2(1H)-喹啉酮母体环上羰基、氨基和不饱和键部位的化学反应. 此法后处理简便, 收率高, 是一种环境友好的绿色化学合成技术.     

聚硅氧烷键合的离子液体用作高温气相色谱固定相的研究

合成了阴离子为二(三氟甲基磺酸酰)亚胺(NTf-2)的新型聚硅氧烷键合离子液体 ([PSOMIm][NTf2]),并采用静态涂渍法,制备了毛细管气相色谱柱.该固定相具有良好的热稳定性.热重测试显示,温度高于380 ℃后,[PSOMIm][NTf2]开始缓慢分解.色谱性能评价显示,此固定相对多种异构体和同系物均具有良好的分离选择性和高的热稳定性.对Grob试剂的分离结果表明,各种组分均能在柱上得到良好的分离且峰的对称性很好.此新型聚合物离子液体在高温气相色谱固定相的研究和应用方面具有较大的潜力.     

离子液体[EMIM][PF6]负载纳米SiOx表面的熔点及结构

制备了离子液体(1-乙基-3-甲基咪唑六氟磷酸 [EMIM][PF₆])负载量不同的多孔纳米氧化硅(SiO_x), 并采用差式扫描量热分析(DSC)、X射线衍射(XRD)、激光Raman光谱、傅里叶变换红外(FTIR)光谱分析等手段研究离子液体负载纳米氧化硅后的熔点变化及相行为. 研究表明负载于纳米氧化硅表面的离子液体熔点明显下降, 且负载于不同表面羟基含量的氧化硅表面熔点下降幅度不同. 纯离子液体[EMIM][PF₆]熔点为62 ℃, 在纳米氧化硅表面负载量为35%时熔点为52 ℃, 比负载前下降10 ℃; 负载于另两种不同羟基含量的纳米氧化硅表面后熔点分别下降20和17 ℃. 而同一种纳米氧化硅(比表面积为640 m²·g^-1)在负载量小于50%时, 熔点下降明显; 进一步增大负载量, 熔点逐渐趋于本体. XRD和Raman光谱分析显示, 离子液体负载于氧化硅表面后其衍射峰或吸收峰相对强度发生明显改变. 分析负载前后纳米氧化硅的结构变化, 推断离子液体熔点下降的主要原因是离子液体分子与纳米氧化硅表面之间存在强烈的界面相互作用, 而表面羟基的密度及比表面积是影响负载后[EMIM][PF₆]离子液体相行为的主要因素.     

离子液体中NaHSO4催化芳香醛与1,3-环己二酮的缩合反应

以NaHSO₄为催化剂, 在离子液体1-丁基-3-甲基咪唑四氟硼酸盐([bmim]BF₄)介质中, 由芳香醛与1,3-环己二酮衍生物制备了9-芳基-2,3,4,5,6,7-六氢-2H-氧杂蒽-1,8-二酮衍生物. 在沸水浴中反应1～2 h, 产率达81.2%～93.0%. 该方法反应时间短, 产率高, 催化剂价廉易得, 而且对环境友好.     

功能化离子液体中Ag纳米微粒的制备及摩擦学性能研究

合成了1-甲基-3-羟乙基咪唑四氟硼酸盐离子液体([C₂OHmim]BF₄)，用红外光谱表征了其结构。以所合成的离子液体作为还原剂、稳定剂与反应介质制备了Ag纳米微粒，用XRD和TEM对微粒的结构和形貌进行了表征。在四球摩擦磨损实验机上研究了[C₂OHmim]BF₄离子液体及掺入Ag纳米微粒后的离子液体的摩擦学性能。掺入银纳米微粒后，离子液体在高载荷下的润滑性有了大幅的改善。用SEM和XPS分别对磨痕表面的形貌和元素组成、化学状态进行了分析，结果表明：在低、高载荷分别起润滑作用的是有机膜和金属-有机复合膜。     

Selectivity of guanidinium ionic liquid for capillary gas chromatography

<正>A guanidinium ionic liquid,N,N,N',N'-tetrahexyl-N",N"-dimethylguanidinium bis(trifluoromethane)sulfonylimide(THDMGNTf_2), was synthesized and used as stationary phase for capillary gas chromatography.In comparison with imidazolium ionic liquid stationary phase,the present new stationary phase exhibits quite different selectivity and behaves more like a low polar stationary phase.The guanidinium ionic liquid of THDMG-NTf_2 exhibited better separation of Grab test mixture than imidazolium ionic liquid of 1-octyl-3-butylimidazolium bis(trifluoromethane)sulfonylimide(OBIM-NTf_2).Solvation parameter model was also used to evaluate the selectivity of THDMG-NTf_2.Additionally,essential oil of Magnolia biondii Pamp was analyzed to further evaluate the selectivity of THDMG-NTf_2 for a sample of complicated components.Satisfactory separation of the essential oil was achieved on a THDMG-NTf_2 column(10 m) while using a commercial column(30 m) as reference.The present study shows that the guanidinium ionic liquid possesses novel chromatographic selectivity and has great potential for wide applications.     

Hydrophobic, Highly Conductive Ambient-Temperature Molten Salts

New, hydrophobic ionic liquids with low melting points (<-30 degrees C to ambient temperature) have been synthesized and investigated, based on 1,3-dialkyl imidazolium cations and hydrophobic anions. Other imidazolium molten salts with hydrophilic anions and thus water-soluble are also described. The molten salts were characterized by NMR and elemental analysis. Their density, melting point, viscosity, conductivity, refractive index, electrochemical window, thermal stability, and miscibility with water and organic solvents were determined. The influence of the alkyl substituents in 1, 2, 3, and 4(5)-positions on these properties was scrutinized. Viscosities as low as 35 cP (for 1-ethyl-3-methylimidazolium bis((trifluoromethyl)sulfonyl)amide (bis(triflyl)amide) and trifluoroacetate) and conductivities as high as 9.6 mS/cm were obtained. Photophysical probe studies were carried out to establish more precisely the solvent properties of 1-ethyl-3-methylimidazolium bis((trifluoromethyl)sulfonyl)amide). The hydrophobic molten salts are promising solvents for electrochemical, photovoltaic, and synthetic applications.     

Influence of the interaction between hydrogen sulfide and ionic liquids on solubility: experimental and theoretical investigation

The solubility of H(2)S in a series of 1-butyl-3-methylimidazolium ([bmim](+)) based ionic liquids (ILs) with different anions, chloride, tetrafluoroborate ([BF(4)](-)), hexafluorophosphate ([PF(6)](-)), triflate ([TfO](-)), and bis(trifluoromethyl)sulfonylimide ([Tf(2)N]-), and in a series of [Tf(2)N] ILs with different cations, i.e., N-alkyl-N'-methylimidazolium, 2-methyl-N-methyl-N'-alkyimidazolium, N-alkylpyridinium, N-butyl-N-methylpyrrolidinium, and N-alkyl-N,N-dimethyl-N-(2-hydroxyethyl)ammonium has been determined using medium-pressure NMR spectroscopy. The observed solubilities are significantly higher than those reported for many other gases in ILs, suggesting the occurrence of specific interactions between H2S and the examined ILs. Quantum chemical calculations have been used to investigate at a molecular level the interaction between H2S and the [bmim](+)-based ILs.     

微波辅助合成有机膦功能化离子液体及对稀土离子的萃取

用微波辐射法,合成了5个含有机膦氧基团的离子液体：1-丙基-3-(3-二苯基氧膦基)丙基咪唑双(三氟甲基磺酰基)亚胺盐([PImC3P(O)Ph2][Tf2N])、1-己基-3-(3-二苯基氧膦基)丙基咪唑双(三氟甲基磺酰基)亚胺盐([HImC3P(O)Ph2][Tf2N])、1-丙基-3-(3-苯基乙氧基氧膦基)丙基咪唑双(三氟甲基磺酰基)亚胺盐([PImC3P(O)Ph(OEt)][Tf2N])、1-己基-3-(3-苯基乙氧基氧膦基)丙基咪唑双(三氟甲基磺酰基)亚胺盐([HImC3P(O)Ph(OEt)][Tf2N])和(3-苯基乙氧基氧膦基)丙基三乙胺双(三氟甲基磺酰基)亚胺盐([TENC3P(O)Ph(OEt)][Tf2N])。 用31P NMR、1H NMR、13C NMR、MS及FT-IR对产物结构进行了表征。 研究了这类离子液体对稀土Nd(III)的萃取性能。 结果表明,这类功能化离子液体可作为单一组分萃取稀土而无需加入有机稀释剂,离子液体结构对萃取效率影响很大,相同条件下季铵盐型结构的离子液体[TENC3P(O)Ph(OEt)][Tf2N]对稀土Nd(Ⅲ)的萃取效率最高。 稀土溶液pH值对萃取效率影响显著,近中性条件下(pH=6.63),对稀土Nd(Ⅲ)的萃取率最高。 用pH=1.00的盐酸溶液可以较好的从离子液体相反萃Nd(Ⅲ),反萃率可达94%。     

Synthesis of copolyimides based on room temperature ionic liquid diamines

Block copolyimides based on aromatic dianhydrides and diamines copolymerized with diamino room temperature ionic liquid (RTIL) monomers were synthesized over a range of compositions. Specifically, two diamino RTILs, 1,3‐di(3‐aminopropyl) imidazolium bis[(trifluoromethyl)sulfonyl] imide ([DAPIM] [NTf₂]) and 1,12‐di[3‐(3‐aminopropyl) imidazolium] dodecane bis[(trifluoromethyl) sulfonyl] imide ([C₁₂ (DAPIM)₂] [NTf₂]₂) were synthesized using a Boc protection method. The two RTILs were reacted with 2,2‐bis(3,4‐carboxylphenyl) hexafluoropropane dianhydride (6FDA) to produce 6FDA‐RTILs oligomers that formed the RTIL component for the block copolyimides. The oligomers were reacted with 6FDA and m‐phenylenediamine (MDA) at oligomer concentration from 6.5 to 25.8 mol % to form block copolyimides. Increasing the concentration of the 6FDA‐RTIL oligomer in the block copolyimides resulted in a decrease in the thermal degradation temperature, glass transition temperature and an increase in the density. The gas permeability of the RTIL based block copolyimide decreased but the ideal permeability selectivity for CO₂/CH₄ gas pair increased relative to the pure 6FDA‐MDA. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 4036–4046, 2010     

1-丁腈-3-甲基咪唑双三氟甲基磺酸亚胺的性质

制备了功能化离子液体1-丁腈-3-甲基咪唑双三氟甲基磺酸亚胺。在T为283.15-353.15 K温度范围内,测定了该功能化离子液体的密度、动力粘度、电导率及折光率。讨论了亚甲基的增减对该类功能化离子液体的密度、动力粘度、电导率及折光率等性质的影响,并与传统咪唑类、吡啶类离子液体物理化学性质的变化趋势进行了对比。通过经验方程计算了该功能化离子液体的热膨胀系数、分子体积、标准摩尔熵及晶格能等热力学性质参数。讨论了Vogel-Fulcher-Tamman (VFT)方程和Arrhenius方程的适用性,得出VFT方程适用于该功能化离子液体,而Arrhenius方程并不适用。有关研究对新型离子液体的合成及其工业化的应用具有十分重要的意义。     

Asymmetric synthesis of (+)-trachyspic acid

Aldol reaction of di-tert-butyl 4-(4-methoxybenzyloxy)-2-oxobutanoate with pent-4-enal using (S)-1-(3,5-bis(trifluoromethyl)phenyl)-3-(pyrrolidin-2-ylmethyl)thiourea hydrochloride as a catalyst, followed by Pinnick oxidation and tert-butyl esterification, gave (2S,3S)-di-tert-butyl 2-(2-(4-methoxybenzyloxy)ethyl)-3-allyl-2-hydroxysuccinate in high optical purity (85% ee), from which the total synthesis of (+)-trachyspic acid, a tumor cell heparanase inhibitor, was accomplished.     

Influence of ionic liquids bearing functional groups in dye-sensitized solar cells

Ionic liquids containing the nitrile and vinyl functional groups attached to imidazolium cations combined with various anions, e.g., iodide, bis[(trifluoromethyl)sulfonyl]imide ([TFSI]-), or dicyanamide ([N(CN)2]-), have been prepared and characterized. These ionic liquids have been successfully used as electrolytes for dye-sensitized solar cells based on nanocrystalline TiO2 with the amphiphilic ruthenium sensitizer [ruthenium (4,4'-dicarboxylic acid-2,2'-bipyridine)(4,4'-bis(p-hexyloxystyryl)-2,2'-bipyridine)][NCS]2 (coded K-19). The iodide salt was used in 3-methoxypropionitrile-based electrolytes, and the performances of both types of devices were evaluated on the basis of their photocurrent density-voltage characteristics and dark current measurements, demonstrating that the functional groups do not exert a detrimental effect on the performance. The solid-state structure of the nitrile-functionalized salt [C1C3CN(im)]I has also been established by single-crystal X-ray diffraction, revealing extensive hydrogen bonding between the cation protons and the iodide.