Achieving 16.68% efficiency ternary as-cast organic solar cells

State-of-the-art organic solar cells(OSCs)often require the use of high-boiling point additive or post-treatment such as temperature annealing and solvent vapor annealing to achieve the best efficiency.However,additives are not desirable in largescale industrial printing process,while post-treatment also increases the production cost.In this article,we report highly efficient ternary OSCs based on PM6:BTP-Cl Br1:BTP-2O-4Cl-C12(weight ratio=1:1:0.2),with 16.68%power conversion efficiency(PCE)for as-cast device,relatively close to its annealed counterpart(17.19%).Apart from obvious energy tuning effect and complementary absorption spectra,the improved PCE of ternary device is mainly attributed to improved morphological properties including the more favorable materials miscibility,crystallinity,domain size and vertical phase separation,which endorse suppressed recombination.The result of this work provides understanding and guidance for high-performance as-cast OSCs through the ternary strategy.     

Realizing high-performance ternary organic solar cell with thick active layer via incorporating a liquid crystalline small molecule as a third component

正In the past two decades,organic solar cells(OSCs)have attracted significant attention owing to their merits of achieving light-weight,flexible,low-cost devices[1,2].Ternary OSC as an efficient way to improve the power conversion efficiencies(PCEs)of OSCs has inspired great interest from researchers     

Non-fullerene acceptor fibrils enable efficient ternary organic solar cells with 16.6% efficiency

Optimizing the components and morphology within the photoactive layer of organic solar cells(OSCs) can significantly enhance their power conversion efficiency(PCE). A new A-D-A type non-fullerene acceptor IDMIC-4F is designed and synthesized in this work, and is employed as the third component to prepare high performance ternary solar cells. IDMIC-4F can form fibrils after solution casting, and the presence of this fibrillar structure in the PBDB-T-2F:BTP-4F host confines the growth of donors and acceptors into fine domains, as well as acting as transport channels to enhance electron mobility. Single junction ternary devices incorporating 10 wt% IDMIC-4F exhibit enhanced light absorption and balanced carrier mobility, and achieve a maximum PCE of 16.6% compared to 15.7% for the binary device, which is a remarkable efficiency for OSCs reported in literature. This non-fullerene acceptor fibril network strategy is a promising method to improve the photovoltaic performance of ternary OSCs.     

Achieving over 16% efficiency for single-junction organic solar cells

To achieve high photovoltaic performance of bulk hetero-junction organic solar cells(OSCs), a range of critical factors including absorption profiles, energy level alignment, charge carrier mobility and miscibility of donor and acceptor materials should be carefully considered. For electron-donating materials, the deep highest occupied molecular orbital(HOMO) energy level that is beneficial for high open-circuit voltage is much appreciated. However, a new issue in charge transfer emerges when matching such a donor with an acceptor that has a shallower HOMO energy level. More to this point, the chemical strategies used to enhance the absorption coefficient of acceptors may lead to increased molecular crystallinity, and thus result in less controllable phase-separation of photoactive layer. Therefore, to realize balanced photovoltaic parameters, the donor-acceptor combinations should simultaneously address the absorption spectra, energy levels, and film morphologies. Here, we selected two non-fullerene acceptors, namely BTPT-4F and BTPTT-4F, to match with a wide-bandgap polymer donor P2F-EHp consisting of an imidefunctionalized benzotriazole moiety, as these materials presented complementary absorption and well-matched energy levels. By delicately optimizing the blend film morphology, we demonstrated an unprecedented power conversion efficiency of over 16% for the device based on P2F-EHp:BTPTT-4F, suggesting the great promise of materials matching toward high-performance OSCs.     

18.01% Efficiency organic solar cell and 2.53% light utilization efficiency semitransparent organic solar cell enabled by optimizing PM6:Y6 active layer morphology

Optimizing the photoactive layer morphology is a simple, promising way to improve the power conversion efficiencies(PCEs)of organic solar cells(OSCs). Here, we compared different post-processing treatments on PM6:Y6 blend films and relevant effects on device performances, including as-cast, thermal annealing and solvent annealing. This solvent annealing processes can effectively improve the vertical distribution and aggregation of polymer donors and small molecule acceptors, then optimize the ac...     

Realizing over 10% efficiency in polymer solar cell by device optimization

The low band gap polymer based on benzodithiophene(BDT)-thieno[3,4-b]thiophene(TT)backbone,PBDT-TS1,was synthesized following our previous work and the bulk heterojunction(BHJ)material comprising PBDT-TS1/PC71BM was optimized and characterized.By processing the active layer with different additives i.e.1,8-diiodooctane(DIO),1-chloronaphthalene(CN)and 1,8-octanedithiol(ODT)and optimizing the ratio of each additive in the host solvent,a high PCE of 9.98%was obtained under the condition of utilizing 3%DIO as processing additive in CB.The effect of varied additives on photovoltaic performance was illustrated with atomic force microscopy(AFM)and transmission electron microscope(TEM)measurements that explained changes in photovoltaic parameters.These results provide valuable information of solvent additive choice in device optimization of PBDTTT polymers,and the systematic device optimization could be applied in other efficient photovoltaic polymers.Apparently,this work presents a great advance in single junction PSCs,especially in PSCs with conventional architecture.     

Additive-free non-fullerene organic solar cells with random copolymers as donors over 9% power conversion efficiency

The PBDB-TBT1:ITIC-based device obtains PCE of 9.09%, and is insensitive to additive and thermal annealing, and forms microstructural morphology.     

Manipulating active layer morphology of molecular donor/polymer acceptor based organic solar cells through ternary blends

The development of molecular donor/polymer acceptor blend(MD/PA)-type organic solar cells(OSCs) lags far behind other type OSCs. It is due to the large-size phase separation morphology of MD/PAblend, which results from the high crystallinity of molecular donors. In this article, to suppress the crystallinity of molecular donors, we use ternary blends to develop OSCs based on one polymer acceptor(P-BNBP-f BT) and two molecular donors(DR3 TBDTT and BTR) with similar chemical structures.The ternary OSC exhibits a power conversion efficiency(PCE) of 4.85%, which is higher than those of the binary OSCs(PCE=3.60% or 3.86%). To our best knowledge, it is the first report of ternary MD/PA-type OSCs and this PCE is among the highest for MD/PA-type OSCs reported so far. Compared with the binary blends, the ternary blend exhibits decreased crystalline size and improved face-on orientation of the donors. As a result, the ternary blend exhibits improved and balanced charge mobilities, suppressed charge recombination and increased donor/acceptor interfacial areas, which leads to the higher shortcircuit current density. These results suggest that using ternary blend is an effective strategy to manipulate active layer morphology and enhance photovoltaic performance of MD/PA-type OSCs.     

Electron-deficient core fused-ring based non-Fullerene acceptor enables over 15% efficiency in single junction organic solar cells

<正>Organic solar cells (OSCs) are promising to access flexible,light weight and semi-transparent photovoltaic devices by low-cost solution fabrication. Recently, the fused-ring nonfullerene acceptors play an important role in promoting the research progress of the OSCs. The power conversion efficiencies (PCEs) have been rapidly boosted to over 14%in single junction OSCs with the development of new nonfullerene acceptors and the related devices [1–3]. Although     

A donor-acceptor-acceptor molecule for vacuum-processed organic solar cells with a power conversion efficiency of 6.4%

A D-A-A-type molecular donor (DTDCTP) featuring electron-accepting pyrimidine and dicyanovinylene blocks has been synthesized for vacuum-deposited planar-mixed heterojunction solar cells with C(70) as the acceptor, giving a power conversion efficiency as high as 6.4%.     

High efficiency ternary organic solar cells enabled by compatible dual-donor strategy with planar conjugated structures

Ternary organic solar cells(OSCs) have received extensive attention for improving the power conversion efficiency(PCE) of organic photovoltaics(OPVs). In this work, a novel donor material(ECTBD) consisting of benzodithiophene(BDT) central electron donor unit was developed and synthesized. The small molecular donor has the same central unit as PM6. The addition of ECTBD into PM6:Y6 system could improve the morphology of active blend layer. In addition, ECTBD showed good morphologically compatibility when blending with PM6:Y6 host, resulting in the improvement of fill factor and current density. As a result, the ternary devices based on PM6:ECTBD:Y6 ternary system achieved a highest PCE of 16.51% with fill factor of 76.24%, which was much higher than that of the binary devices(15.7%). Overall, this work provided an effective strategy to fabricate highly efficient ternary organic solar cells through design of the novel small molecular donor as the third component.     

A chlorinated low-bandgap small-molecule acceptor for organic solar cells with 14.1% efficiency and low energy loss

A new acceptor-donor-acceptor(A-D-A) type small-molecule acceptor NCBDT-4 Cl using chlorinated end groups is reported.This new-designed molecule demonstrates wide and efficient absorption ability in the range of 600–900 nm with a narrow optical bandgap of 1.40 eV. The device based on PBDB-T-SF:NCBDT-4 Cl shows a power conversion efficiency(PCE) of 13.1%without any post-treatment, which represents the best result for all as-cast organic solar cells(OSCs) to date. After device optimizations, the PCE was further enhanced to over 14% with a high short-circuit current density(Jsc) of 22.35 m A cm-2 and a fill-factor(FF) of 74.3%. The improved performance was attributed to the more efficient photo-electron conversion process in the optimal device. To our knowledge, this outstanding efficiency of 14.1% with an energy loss as low as 0.55 eV is among the best results for all single-junction OSCs.     

Low temperature,non-halogen solvent processed single-component organic solar cells with 10% efficiency

A double-cable conjugated polymer DCPIC-BO is designed via introducing a long-branched alkyl chains 2-buthyloctyl into the acceptor side unit. Compared with the double-cable polymer (DCPIC-EH) with the 2-ethylhexyl alkyl chains, the solubility of the DCPIC-BO in non-halogen solvents is substantially improved. Therefore, a power conversion efficiency (PCE) of 9.77% can be obtained by the devices processed from o-xylene at 40 °C, while the DCPIC-EH cannot be processed due to its poor solubility under this condition. Moreover, PCEs of 10.10% for small-area (0.04 cm²) devices and nearly 9% for devices with an area of 1 cm² are achieved using a non-halogenated solid additive in o-xylene, realizing the "absolutely halogen-free" OSC fabrication.     

Reduced energetic disorder enables over 14% efficiency in organic solar cells based on completely non-fused-ring donors and acceptors

The large energetic disorder has been regarded as a limitation for the further advance of organic solar cells(OSCs).The intramolecular energetic disorder,which originates from the molecular conformational diversity,is quite different for various non-fused-ring materials and of great importance for the corresponding device performance.In this work,the 2-ethylhexyl on A4T-16,an efficient completely non-fused-ring acceptor,is replaced with the 3-ethylheptyl to obtain a novel acceptor of A4T-3.The o...     

Tandem organic solar cells with efficiency over 19% via the careful subcell design and optimization

The series-connected tandem device strategy is an effective approach to promote the efficiency of organic solar cells(OSCs) with broadened absorption range and alleviated thermalization and transmission loss.In this article,two nonfullerene acceptors,FB rThCl and BTP-4Se,with complementary absorptions covering the range from 300 to 1,000 nm were designed and synthesized for the front and rear cell,respectively.The front cell based on D18:FBr-ThCl exhibited a V_oc of 1.053 V with high e...     

Molecular exchange and passivation at interface afford high-performing perovskite solar cells with efficiency over 24%

The interface is crucial for perovskite solar cells(PSCs). However, voids at interfaces induced by the trapped hygroscopic dimethyl sulfoxide(DMSO) can reduce charge extraction and accelerate the film degradation, seriously damaging the efficiency and stability. In this work, 4,4’-dinonyl-2,2’-dipyridine(DN-DP), a Lewis base with long alkyl chains is introduced to solve this problem. Theoretical calculated and experimental results confirm that the dipyridyl group on DN-DP can more strongly coord...     

Breaking 12% efficiency in flexible organic solar cells by using a composite electrode

The performance of flexible organic solar cells(OSCs)significantly relies on the quality of transparent flexible electrode.Here,we used silver nanowires(AgNWs)with various weight ratios to dope high-conductive poly(3,4-ethylenedioxythiophene):polystyrene sulfonate(PH1000)to optimize the optical and electronic properties of PH1000 film.A high-quality flexible composite electrode PET/Ag-mesh/PH1000:AgNWs-20 with smooth surface,a low sheet resistance of 6Ω/sq and a high transmittance of 86%at 550-nm wavelength was obtained by doping 20 wt%AgNWs to PH1000(PH1000:AgNWs-20).The flexible OSCs based on the PET/Ag-mesh/PH1000:AgNWs-20 electrode delivered a power conversion efficiency(PCE)of12.07%with an open circuit voltage(V_(oc))of 0.826 V,a short-circuit current density(J_(sc))of 20.90 m A/cm~2and a fill factor(FF)of69.87%,which is the highest reported PCE for the flexible indium-tin oxide(ITO)-free OSCs.This work demonstrated that the flexible composite electrodes of PET/Ag-mesh/PH1000:AgNWs are promising alternatives for the conventional PET/ITO electrode,and open a new avenue for developing high-performance flexible transparent electrode for optoelectronic devices.     

Effects of processing additives in non-fullerene organic bulk heterojunction solar cells with efficiency >11%

The solar cell surface morphologies with different additives observed with slightly changed in roughness. It is easily to get the best PCE of 11.1% with using 0.5% DIO additives.     

Side-chain modification of polyethylene glycol on conjugated polymers for ternary blend all-polymer solar cells with efficiency up to 9.27%

With the rapid progress achieved by all-polymer solar cells (all-PSCs), wide-bandgap copolymers have attracted intensive attention for their unique advantage of constructing complementary absorption profiles with conventional narrow-bandgap copolymers. In this work, we designed and synthesized a wide bandgap ternary copolymer PEG-2% which has the benzodithiophene-alt-difluorobenzotriazole as the backbone and the polyethylene glycol (PEG) modified side chain. The PBTA-PEG-2%:N2200 can be processed with a non-chlorinated solvent of 2-methyl-tetrahydrofuran (MeTHF) for the binary all-PSC, which exhibits a moderate photovoltaic performance. In particular, the ternary all-PSCs that consisting an additional narrow bandgap polymer donor PTB7-Th can also be processed with MeTHF, resulting in an unprecedented power conversion efficiency (PCE) of 9.27%, and a high PCE of 8.05% can be achieved with active layer thickness of 240 nm, both of which are the highest values so far reported from all-PSCs. Detailed investigations revealed that the dramatically improved device performances are attributable to the well-extended absorption band in the photoactive layer. Hence, developing novel copolymers with tailored side chains, and introducing additional polymeric components, can broaden the horizon for high-performance all-PSCs.     

Organic tandem solar cells with PCE over 12%

正In contrast to inorganic solar cells,organic solar cells(OSCs)show advantages such as low cost,light weight,and flexibility.In fact,the most attractive feature of OSCs is that they could be produced in large scale and at low cost by roll-to-roll printing,just like printing newspapers,which does not in-