Chlorination of bisphenol A: kinetics and by-products formation

The kinetics of initial chlorination of bisphenol A (BPA) was studied between pH 2 and 11 at room temperature (20 +/- 2 degrees C). pH Profile of the apparent second-order rate constant of the reaction of BPA with chlorine were modeled considering the elementary reactions of HOCl with BPA species and an acid-catalyzed reaction. The predominant reactions at near neutral pH were the reactions of HOCl with the two phenolate species of BPA (k = 3.10 x 10(4) M(-1)s(-1) for BPA- and 6.62 x 10(4) M(-1) s(-1) for BPA(2-)). At near neutral pH, half-life times of BPA were calculated to be less than 1.5 h for chlorine residual higher than 0.2 mg l(-1). Chlorination of synthetic treated waters spiked with BPA showed that BPA disappeared within 4 h and that chlorinated bisphenol A congeners were rapidly formed and remained in solution for up to 10-20 h when low chlorine dosages are applied (0.5-1 mg l(-1)). To limit their presence in drinking water networks, it is then necessary to maintain high chlorine residuals that rapidly produce and decompose chlorinated bisphenol A congeners.     

Catalytic effects by metal oxides on the formation and degradation of chlorinated aromatic compounds in fly ash

Polychlorinated benzenes, dibenzo-p-dioxins (PCDD), and dibenzofurans (PCDF) may be formed below the combustion temperature in fly ash from municipal solid waste incinerators (MSWI). Copper catalyzes this formation, possibly by the Deacon reaction. Many other elements are also Deacon catalysts or promoters, and here we report results from a statistically designed experiment with 15 metal oxides added to fly ash and heated at 300 degrees C for 2h in an air atmosphere. A resolution IV fractional factorial design with four replicates was completed in 36 runs with the oxides of magnesium, yttrium, titanium, vanadium, niobium, chromium, molybdenum, tungsten, manganese, iron, cobalt, nickel, copper, zinc, and tin. All samples were analyzed for chlorinated benzenes and the results were evaluated by analysis of variance. The addition of copper significantly increased the amounts of the chlorinated benzenes, while cobalt, chromium and vanadium decreased the net formation. The oxides of zinc and iron seemed to have a slightly positive and negative effect respectively. The findings in this study seem to corroborate our previously reported results regarding the different catalytic effects of copper and chromium, and lack of a significant effect by nickel. Besides chromium, it also identifies cobalt and vanadium as potent catalysts for oxidative degradation of the chlorinated aromatic compounds found in MSWI fly ash.     

Photo-electrochemical degradation of some chlorinated organic compounds on n-TiO2 electrode

The electrolysis of some chlorinated organic compounds such as chloroacetic acids, chloromethanes and chloroethenes were carried out on a photo-irradiated n-TiO(2) electrode applied a constant potential, 1.0 V vs. Ag/AgCl, and the alternated pulse potentials of +1.0 V and various negative potentials, -1.0, -1.2 and -1.4V vs. Ag/AgCl in 0.1 mol dm(-3) Na(2)SO(4) solutions saturated with oxygen or with nitrogen. These compounds were degraded on the n-TiO(2) electrode by the photo-electrolysis and mineralized to carbon dioxide, carbon monoxide and chloride ion. When the alternated pulse potentials were applied, the mineralization yields were increased for these compounds, especially for trichloroacetic acid and carbon tetrachloride, both of which were comparatively stable to the degradation in the constant potential electrolysis. The presence of oxygen in the solution was effective for the mineralization of these compounds, while little effective for that of trichloroacetic acid and of carbon tetrachloride.     

Identification and quantification of chlorinated bisphenol A in wastewater from wastepaper recycling plants

Chlorinated derivatives of bisphenol A were detected in the final effluents of eight paper manufacturing plants in Shizuoka, Japan, where thermal paper and/or other printed paper is used as the raw material. Their amounts were determined by gas chromatography/mass spectrometry (GC/MS) after treatment with N, O-bis(trimethylsilyl)trifluoroacetamide, and ranged from traces to 2.0 microg/l. They are likely produced by chlorination of bisphenol A, which was released into the effluents from the pulping process of wastepaper, during or after bleaching with chlorine.     

Photolytic degradation of hexacyanoferrate (II) in aqueous media: the determination of the degradation kinetics

Upon exposure to ultraviolet (UV) radiation, non-toxic hexacyanoferrate (II) (Fe(CN)6(-4)) undergoes direct photolysis, resulting in the liberation of toxic free cyanide (HCN,CN-). This experimental study employed manipulation of several environmental parameters with the objective of characterizing their effects on the photolysis rate of hexacyanoferrate (II). The photolysis rate was not affected significantly by varying (1) the initial hexacyanoferrate (II) concentration (from 10 to 400 microg/l as total CN), (2) the solution turbidity (kaolin clay concentration from 0 to 5 mg/l), and (3) pH (from pH 4 to 12). Parameters that exhibited a significant effect (significance level, alpha < 0.05) on the photolysis rate included the intensity of incident ultraviolet radiation (from 30 to 110 micromol/m2s photons) and the concentration of dissolved organic matter (color) from added humic acid (from 0 to 10 mg/l). In addition, observations made by spiking both deionized and natural waters demonstrated that the rate of hexacyanoferrate (II) photolysis (1) significantly exceeded the rate of free cyanide formation from photolysis and (2) exhibited significant retardation that directly depended on the free cyanide concentration in solution. The hexacyanoferrate (II) photolysis data were consistent with a simple, semi-empirical kinetic model that included the reversible formation of at least one cyanoferrate intermediate. The reverse reaction, in turn, behaved in a manner that was consistent with a second order rate law with respect to free cyanide concentration.     

Selective redox degradation of chlorinated aliphatic compounds by Fenton reaction in pyrite suspension

Selective redox degradation of chlorinated aliphatics by Fenton reaction in pyrite suspension was investigated in a closed system. Carbon tetrachloride (CT) was used as a representative target of perchlorinated alkanes and trichloroethylene (TCE) was used as one of highly chlorinated alkenes. Degradation of CT in Fenton reaction was significantly enhanced by pyrite used as an iron source instead of soluble Fe. Pyrite Fenton showed 93% of CT removal in 140 min, while Fenton reaction with soluble Fe(II) showed 52% and that with Fe(III) 15%. Addition of 2-propanol to the pyrite Fenton system significantly inhibited degradation of TCE (99% to 44% of TCE removal), while degradation of CT was slightly improved by the 2-propanol addition (80-91% of CT removal). The result suggests that, unlike oxidative degradation of TCE by hydroxyl radical in pyrite Fenton system, an oxidation by the hydroxyl radical is not a main degradation mechanism for the degradation of CT in pyrite Fenton system but a reductive dechlorination by superoxide can rather be the one for the CT degradation. The degradation kinetics of CT in the pyrite Fenton system was decelerated (0.13-0.03 min⁻¹), as initial suspension pH decreased from 3 to 2. The formation of superoxide during the CT degradation in the pyrite Fenton system was observed by electron spin resonance spectroscopy. The formation at initial pH 3 was greater than that at initial pH 2, which supported that superoxide was a main reductant for degradation of CT in the pyrite Fenton system.     

Genotoxic potentials and related mechanisms of bisphenol A and other bisphenol compounds: A comparison study employing chicken DT40 cells

Bisphenol A (BPA) has been found in plastic food containers, paper currencies and toys. BPA has been reported for various adverse health concerns including reproduction, development and carcinogenesis. These potential health implications have led to increasing use of alternative bisphenols such as bisphenol F and bisphenol S among many. However, little is known about the toxicity of alternative bisphenols and most of the toxicological information is limited to endocrine disrupting potentials. In this study, we evaluated cytotoxicity and the genotoxic potentials of several bisphenol compounds, and identified the mechanism of genotoxicity using a panel of mutant chicken DT40 cell lines deficient in DNA repair pathways. Several bisphenols including bisphenol AP, bisphenol M, or bisphenol P exerted genotoxic potentials that are greater than that of BPA. Generally RAD54^−/− mutant cells were the most sensitive to all bisphenols except for bisphenol F, suggesting the induction of DNA double-strand breaks that could be rescued by homologous recombination. Genotoxic potential of bisphenols was confirmed by chromosomal aberration assay and γ-H2AX foci forming assay between wild-type and RAD54^−/− mutant. Among the tested bisphenols, BPP at 12.5 μM showed the greatest genotoxic potency, inducing chromosomal aberration and γ-H2AX foci in RAD54^−/− mutant by 2.6 and 4.8 folds greater than those in wild-type, respectively. Our results clearly show several alternative bisphenols can cause genotoxicity that could be rescued by homologous recombination pathway, and some bisphenols induced even greater genotoxic potentials than that of BPA.     

A biological loss of endosulfan and related chlorinated organic compounds from aqueous systems in the presence and absence of oxygen.

Endosulfan is a cyclodiene organochlorine currently widely used as an insecticide throughout the world. This study reports that the endosulfan isomers can be readily dissipated from aqueous systems at neutral pH in the absence of biological material or chemical catalysts, in the presence or absence of oxygen. The study showed that aldrin, dieldrin, and endosulfan exhibit bi-phasic loss from water in unsealed and butyl rubber sealed vessels. Half-lives are substantially increased for endosulfan I when oxygen is removed from the incubation vessel. The study conditions, where PTFE was used, were such that loss due to volatilization and alkaline chemical hydrolysis was eliminated. Half-lives determined from these data indicate that the parent isomers are much less persistent than the related cyclodienes, aldrin and dieldrin, confirming the findings of previous studies. The major oxidation product of endosulfans I and II, endosulfan sulfate, is less volatile and can persist longer than either of the parent isomers. Endosulfan sulfate was not formed in any of the treatments suggesting that it would not be formed in aerated waters in the absence of microbial activity or strong chemical oxidants. Since endosulfan sulfate is formed in many environments through biological oxidation, and is only slowly degraded (both chemically in sterile media and biologically), it represents a predominant residue of technical grade endosulfan, which finds its way into aerobic and anaerobic aquatic environments. The data obtained contributes to and confirms the existing body of half-life data on endosulfan I and II and its major oxidation product, endosulfan sulfate. The half-life data generated from the current study can be used in models for predicting the loss of chlorinated cyclodiene compounds from aqueous systems. The findings also highlight the importance of critically reviewing half-life data, to determine what the predominant processes are that are acting on the compounds under study.     

水溶液中萘普生的光催化降解及产物的毒性评价

以紫外光为光源,采用photo-Fenton方法降解低浓度的萘普生(NPX)水溶液,确定了最佳降解条件为:pH=3,H2O2质量浓度为500 mg/L,Fe2+质量浓度为15 mg/L.NPX的光催化降解过程符合一级动力学方程.在最佳降解条件下,NPX降解反应速率常数为0.136 0 min-1.NPX溶液对普通小球藻的生长有一定的抑制作用,降解前抑制率为50.54%,降解75min后,抑制率下降至1.99%.photo-Fenton可以降低NPX溶液的生物毒性,适用于处理含低浓度NPX水溶液.     

Adsorption of phenolic compounds from aqueous solutions by a water-compatible hypercrosslinked polymeric adsorbent

A water-compatible hypercrosslinked polymeric adsorbent (NJ-8) for adsorbing and removing phenolic compounds from their aqueous solutions was prepared. This product can be used directly without a wetting process. Its adsorption property toward four phenolic compounds, phenol, p-cresol, p-chlorophenol, and p-nitrophenol was tested using the commercial Amberlite XAD-4 as a reference. The capacities of equilibrium adsorption for all four phenolic compounds on the NJ-8 from their aqueous solutions are around two times as high as that of Amberlite XAD4 within the temperature range 283-323 K, which may contribute to their micropore structure and the partial polarity on the network. Freundlich isotherm equations, as well as relative adsorption capacities and isosteric adsorption enthalpies for the four phenolic compounds, indicate that the adsorption of phenolic compounds on the NJ-8 resin is a physical adsorption process. Mini-column adsorption studies for phenol on Amberlite XAD4 and NJ-8 resins show that the breakthrough adsorption capacities are 0.54 and 0.99 mmol/ml, and the total capacities are 0.62 and 1.37 mmol/ml, while no extra acetone was needed to remove the adsorbed phenol from NJ-8 as from Amberlite XAD4.     

Chlorination of chlortoluron: kinetics, pathways and chloroform formation

Chlortoluron chlorination is studied in the pH range of 3-10 at 25 ± 1 °C. The chlorination kinetics can be well described by a second-order kinetics model, first-order in chlorine and first-order in chlortoluron. The apparent rate constants were determined and found to be minimum at pH 6, maximum at pH 3 and medium at alkaline conditions. The rate constant of each predominant elementary reactions (i.e., the acid-catalyzed reaction of chlortoluron with HOCl, the reaction of chlortoluron with HOCl and the reaction of chlortoluron with OCl⁻) was calculated as 3.12 (± 0.10) × 10⁷ M⁻² h⁻¹, 3.11 (±0.39) × 10² M⁻¹ h⁻¹ and 3.06 (±0.47) × 10³ M⁻¹ h⁻¹, respectively. The main chlortoluron chlorination by-products were identified by gas chromatography-mass spectrometry (GC-MS) with purge-and-trap pretreatment, ultra-performance liquid chromatography-electrospray ionization-MS and GC-electron capture detector. Six volatile disinfection by-products were identified including chloroform (CF), dichloroacetonitrile, 1,1-dichloropropanone, 1,1,1-trichloropropanone, dichloronitromethane and trichloronitromethane. Degradation pathways of chlortoluron chlorination were then proposed. High concentrations of CF were generated during chlortoluron chlorination, with maximum CF yield at circumneutral pH range in solution.     

胶束强化超滤去除水中双酚A

采用截留分子量(MWCO)为5000 Dalton、1000 Dalton的聚砜超滤膜,MWCO为1 kDa的再生纤维素超滤膜;采用十二烷基苯磺酸钠(SDBS)、曲拉通100(TritonX-100)、吐温80(Tween-80)、烷基多苷(APG)为表面活性剂,用胶团强化超滤工艺去除水中双酚A。研究了不同材质和截留分子量的超滤膜、表面活性剂浓度、膜操作压力、溶液pH和溶液中电解质等因素对该工艺的影响。结果表明,SDBS对双酚A有较好的去除效果,去除率在80%以上。在H+和Na+存在的条件下,双酚A的截留率增加,透过液中SDBS浓度降低。SDBS与非离子表面活性剂的复配可以提高双酚A截留率,降低透过液中SDBS的浓度,复配效果优劣顺序为Tween-80TritonX-100APG。     

Quantification of bisphenol A, 353-nonylphenol and their chlorinated derivatives in drinking water treatment plants

Bisphenol A (BPA) and nonylphenols (NP) are of major concern to public health due to their high potential for human exposure and to their demonstrated toxicity (endocrine disruptor effect). A limited number of studies have shown that BPA and NP are present in drinking water. The chlorinated derivatives that may be formed during the chlorination step in drinking water treatment plants (DWTP) exhibit a higher level of estrogenic activity than their parent compounds. The aim of this study was to investigate BPA, 353NP, and their chlorinated derivative concentrations using an accurate and reproducible method of quantification. This method was applied to both surface and treated water samples from eight French DWTPs producing from surface water. Solid-phase extraction followed by liquid chromatography?Ctandem mass spectrometry was developed in order to quantify target compounds from water samples. The limits of detection ranged from 0.3 to 2.3?ng/L for BPA and chlorinated BPA and from 1.4 to 63.0?ng/L for 353NP and chlorinated 353NP. BPA and 353NP were found in most analyzed water samples, at a level ranging from 2.0 to 29.7?ng/L and from 0 to 124.9?ng/L, respectively. In most of DWTPs a decrease of BPA and 353NP was observed between surface water and treated water (36.6 to 78.9?% and 2.2 to 100.0?% for BPA and 353NP, respectively). Neither chlorinated BPA nor chlorinated 353NP was detected. Even though BPA and 353NP have been largely removed in the DWTPs studied, they have not been completely eliminated, and drinking water may consequently remain a source of human exposure.     

Metal catalyzed formation of chlorinated aromatic compounds: a study of the correlation pattern in incinerator fly ash

Chlorinated aromatics are unintentionally formed and released from combustion and other thermal processes involving organic matter and chlorine. The catalytic activity of incinerator fly ash in the low-temperature formation of chlorinated aromatics has been demonstrated in both laboratory experiments and full-scale trials. Copper has been shown to be an effective catalyst, but several other transition metals possess a similar activity. Here results are reported from a series of full-scale combustion trials with different fractions of household and industrial wastes, with waste from forestry as a reference fuel. The composition of elements and chlorinated aromatics in the fly ash was evaluated with principal component analysis and partial least squares regression. The observed correlation pattern indicates that metals other than copper are of equal importance for the catalytic activity. Chromium and nickel are two of these metals, which may contribute to the de novo formation of chlorinated benzenes, phenols, PCDD and PCDF.     

Abiotic degradation of chlorinated ethanes and ethenes in water

INTRODUCTION: Chlorinated ethanes and ethenes are among the most frequently detected organic pollutants of water. Their physicochemical properties are such that they can contaminate aquifers for decades. In favourable conditions, they can undergo degradation. In anaerobic conditions, chlorinated solvents can undergo reductive dechlorination. DEGRADATION PATHWAYS: Abiotic dechlorination is usually slower than microbial but abiotic dechlorination is usually complete. In favourable conditions, abiotic reactions bring significant contribution to natural attenuation processes. Abiotic agents that may enhance the reductive dechlorination of chlorinated ethanes and ethenes are zero-valent metals, sulphide minerals or green rusts. OXIDATION: At some sites, permanganate and Fenton's reagent can be used as remediation tool for oxidation of chlorinated ethanes and ethenes. SUMMARY: Nanoscale iron or bimetallic particles, due to high efficiency in degradation of chlorinated ethanes and ethenes, have gained much interest. They allow for rapid degradation of chlorinated ethanes and ethenes in water phase, but they also give benefit of treating dense non-aqueous phase liquid.     

Experimental and theoretical studies on formation and degradation of chloro organic compounds

Studies on oxidation of tert-butyl ethers in the presence of chloride ions proved that acid medium favoured formation of chloro organic compounds. 1,2-Dichloro-2-methylpropane, 3-chloro-2-chloromethylpropene were identified among the reaction products. Presence of these compounds was identified both in the case when methyl-tert-butyl ether (MTBE) and ethyl-tert-butyl ether (ETBE) were subjected to reaction. Reaction products were analysed by gas chromatography method with application of -FID, -MS and -AED detectors. On the basis of experimental data, the path of tert-butyl ethers conversion to dichloro products was proposed. It was found that the identified chloro derivatives could be formed both by ionic and radical reactions. In order to confirm this thesis for the proposed scheme of reaction, the theoretical calculations of molecular simulation of the reaction paths were performed.     

Anaerobic formation and degradation of toxic aromatic compounds in agricultural and communal sewage deposits

Relatively high concentrations of phenol, p-cresol, phenylacetic acid and other aromatic compounds were found in agricultural and communal sewage deposits. These toxic aromatic compounds are products of the bacterial degradation of aromatic amino acids under anaerobic conditions. In laboratory experiments at 26 degrees C and under N2-atmosphere, the same aromatics were formed from the amino acid tyrosine and from gelatine in assays inoculated with sewage sludge. After exhaustion of tyrosine and gelatine, respectively, concentrations of the accumulated phenol and other aromatics remained stable for months, i.e., phenol, p-cresol, phenylacetic acid etc. are dead-end products of the bacterial metabolism under these conditions. After addition of sodium nitrate the aromatic compounds are metabolically decomposed by denitrification within weeks.