1 V All-MOS ΣΔ A/D Converters in the Log-domain

This paper presents novel low-voltage all-MOS analog circuit techniques for the synthesis of oversampling A/D converters. The new approach exploits the possibilities of Log-domain processing by using the MOSFET in subthreshold operation. Based on this strategy, a complete set of very low-voltage (down to 1 V) low-power (below 100 W) all-MOS basic building blocks is proposed. The resulting analog circuit techniques allow the integration of A/D converters for low-frequency (below 100 KHz) applications in digital CMOS technologies. Examples are given for a standard 0.35 m VLSI process.     

RF CMOS Cells for Wireless Applications

There is increasing interest in the use of CMOS circuits for high frequency highly integrated wireless telecommunications systems. This paper presents the results of on-going work into the development of a cell library that includes many of the circuit elements required for the high frequency sub-systems of communications integrated circuits. The cell library studied included an RF control element, single ended Class A amplifier, RF isolator, and Gilbert cell mixer circuit topologies. Circuit design criteria and measurement results are presented. All cells were fabricated using standard 2.0, 1.2, and 0.8 m CMOS integrated circuit fabrication processes with no post-processing performed. The results indicate that 2.0 m CMOS can be used successfully up to approximately 250 MHz with 0.8 m cells useful up to approximately 1000 MHz.     

Synthesis of Log-Domain Filters from First-Order Building Blocks

Log-domain filters are an important class of current-mode circuits having large-signal linearity and increased tuning range over voltage-mode filter circuits of similar complexity. In this paper we describe synthesis of a single-ended, first-order filter circuit from static and dynamic translinear circuit principles, and show how higher-order filters can be easily constructed from the first-order building block. We address additional issues related to low-frequency (audio-frequency) filter design and present results measured from test circuits and a complete 15-channel filterbank system fabricated in 2 m and 1.2 m BiCMOS processes.     

A 1.2 V Rail-to-Rail Analog CMOS Rank-Order Filter with k-WTA Capability

In this paper, we design a rank-order filter with k-WTA capability for 1.2 V supply voltage. The circuit can find a rank order among a set of input voltages by setting different binary signals. Moreover, without modifying the circuit, the k-WTA function can be easily configured. The circuit has been designed using a 0.5 m DPDM CMOS technology. Seven input voltages are used to verify the performance of the circuit. The results of HSPICE post-layout simulation show that the response time of the circuit is 10 s for each rank-order operation, the input dynamic range is rail-to-rail, and the resolution is 10 mV for 1.2 V supply voltage. An experimental chip has been fabricated, in which accuracy of the comparator is measured as 40 mV for low-voltage operation. The dynamic power dissipation of the chip is 550 W.     

Systematic Width-and-Length Dependent CMOS Transistor Mismatch Characterization and Simulation

This paper presents a methodology for characterizing the random component of transistor mismatch in CMOS technologies. The methodology is based on the design of a special purpose chip which allows automatic characterization of arrays of NMOS and PMOS transistors of different sizes. Up to 30 different transistor sizes were implemented in the same chip, with varying transistors width W and length L. A simple strong inversion large signal transistor model is considered, and a new five parameters MOS mismatch model is introduced. The current mismatch between two identical transistors is characterized by the mismatch in their respective current gain factors /, V _TO threshold voltages , bulk threshold parameters , and two components for the mobility degradation parameter mismatch ₀ and _e. These two components modulate the mismatch contribution differently, depending on whether the transistors are biased in ohmic or in saturation region. Using this five parameter mismatch model, an extraordinary fit between experimental and computed mismatch is obtained, including minimum length (1 m) transistors for both ohmic and saturation regions. Standard deviations for these five parameters are obtained as well as their respective correlation coefficients, and are fitted to two dimensional surfaces f(W, L) so that their values can be predicted as a function of transistor sizes. These functions are used in an electrical circuit simulator (Hspice) to predict transistor mismatch. Measured and simulated data are in excellent agreement.     

Design and Analysis of On-Chip ESD Protection Circuit with Very Low Input Capacitance for High-Precision Analog Applications

An ESD protection design is proposed to solve the ESD protection challenge to the analog pins for high-frequency or current-mode applications. By including an efficient power-rails clamp circuit into the analog I/O pin, the device dimension (W/L) of ESD clamp device connected to the I/O pad in the analog ESD protection circuit can be reduced to only 50/0.5 (m/m) in a 0.35-m silicided CMOS process, but it can sustain the human-body-model (machine-model) ESD level of up to 6 kV (400 V). With such a smaller device dimension, the input capacitance of this analog ESD protection circuit can be significantly reduced to only 1.0 pF (including the bond pad capacitance) for high-frequency applications. A design model to find the optimized layout dimensions and spacings on the input ESD clamp devices has been also developed to keep the total input capacitance almost constant (within 1% variation), even if the analog input signal has a dynamic range of 1 V.     

A CMOS Four Quadrant Current/Transconductance Multiplier

This paper describes a highly linear current four quadrant multiplier. The circuit is designed to operate in a fully differential way. It is based on the square-law characteristic of MOS transistors in saturation region. Experimental results for 2 m CMOS technology are provided.     

An Analog VLSI, Scale Invariant Method for Edge Detection

A simple technique for detecting adjustable contrast in a visual scene is presented. The circuit elements can be used to detect contrast in any array of sensors or processing elements where spatial relationships among neighboring elements define contrast or the presence of an edge. This technique eliminates the need for a differential pair, thereby allowing more than two inputs to be compared for contrast in a single processing step. The circuit elements first smooth erroneous edges in the array through the use of a resistive network, then, the mean (scaled by an adjustable amount) of a pixel and its neighbors is compared to the harmonic mean of the same pixels to detect the presence of contrast within the pixel neighborhood. Comparison between the mean and harmonic mean allows the detection of contrast to be scale-invariant as long as the transistors remain in subthreshold operation. This circuit offers the massively parallel processing inherent to focal plane processing within an 18% fill factor in a 2 m process, 6.8 W typical power dissipation per element, and 0.67 ms response time at low power subthreshold operation. Results for a proof of concept, 8×8 array of pixels with light inputs, as well as a purely electronic input, 4×4 array are presented.     

Quality Determination for Gate Delay Fault Tests Considering Three-State Elements

Most industrial digital circuits contain three-state elements besides pure logic gates. This paper presents a gate delay fault simulator for combinational circuits that can handle three-state elements like bus drivers, transmission gates and pulled busses. The well known delay faults--slow-to-rise and slow-to-fall--are considered as well as delayed transitions from isolating signal state high impedance to binary states 0 and 1 and vice versa. The presented parallel delay fault simulator distinguishes between non-robust, robust and hazard free tests and determines the quality of a test. Experimental results for ISCAS85/89 benchmark circuits are presented as well as results for industrial circuits containing three-state elements.     

A concept of analog-digital merged circuit architecture for future VLSI's

This paper describes the new analog-digital merged circuit architecture which utilizes the pulse modulation signals. By reconsidering the information representing and processing principles, and the circuit operations governed by the physical law, the new circuit architecture is proposed to overcome the limitations of existent VLSI technologies. The proposed architecture utilizes the pulse width modulation (PWM) signal which has analog information in the time domain, and be constructed with the novel PWM circuits which carry out the multi-input arithmetic operations, the signal conversions and the data storage. It has a potential to exploit the high speed switching capability of deep sub-m devices, and to reduce the number of devices and the power dissipation to one-tenth of those of the binary digital circuits. Therefore it will effectively implement the intelligent processing systems utilizing 0.5–0.2 m scaled CMOS devices.     

High-Speed High-Precision CMOS Current Conveyor

In this paper a new class-AB CMOS second generation current conveyor (CCII) based on a novel high-performance voltage follower topology is proposed. Post-layout simulation results from a 0.8 m design supplied at 3.3 V show very low resistance at node X (<50 ), high frequency operation (100 MHz), high precision in the voltage and current transference and reduced offset. As application examples, a V-I converter and a current feedback operational amplifier (CFOA) have been implemented. The latter presents slew-rate levels higher than ±100 V/s.     

An integrated CMOS telephone line adapter

A novel fully CMOS circuit for electronic telephone line adaption is described. In the on-hook state the circuit operates in micropower condition, dissipates only 5 A, and is capable of generating the supply voltage required for retention of data stored on external RAM. In the off-hook state the circuit is boosted into the normal operation mode and is able to drive external bipolar transistors to synthesize the line impedance. The dc and the ac line impedances are set with external components, thus permitting the fulfillment of different PTT specifications. The circuit also performs line signal extraction and transmission, both for voice and DTMF. The dc line voltage is monitored, and a supervision block generates a precise reset signal when the line voltage drops out. The circuit has been integrated in a CMOS P-well 3-m double-poly single-metal technology; the silicon area is 6 mm².     

Ultra Low Power CORDIC Processor for Wireless Communication Algorithms

We designed and implemented an ultra low power CORDIC processor which targets the implementation of advanced wireless communications algorithms based on Givens rotations and Householder reflections. We propose a modified CORDIC algorithm and architecture, and we elaborate on the low power architectural and algorithmic techniques for minimizing its power consumption. Our CORDIC implementation consumes, in rotate mode, on average 50 W @ 10 MHz under 1 V supply voltage in a .25 m technology.     

A New Approach to Realize Variable Gain Amplifiers

A new methodology to develop variable gain amplifiers is developed. The methodology is based on a feedback loop to generate the exponential characteristic, which is required for VGA circuits. The proposed idea is very suitable for applications that require very low power consumption, and as an application, a new current mode variable gain amplifier will be shown. The gain is adapted via a current signal ranges from –7.5 A to +6.5 A. Pspice simulations based on Mietec 0.5 m CMOS technology show that the gain can be varied over a range of 29.5 dB, with bandwidth of 3 MHz at maximum gain value. The circuit operates between ±1.5 V and consumes an average amount of power less than 495 W.     

A nonvolatile analog neural memory using floating-gate MOS transistors

Simple floating-gate transistors fabricated by a conventional double-polysilicon process show excellent programming and charge-retention characteristics. A five-transistor synapse cell achieves 8-bit resolution and at least 6-bit accuracy for analog neural computation. It occupies 67 m×73 m in a 2-m CMOS process and can retain charge accuracy for over 25 years.This research was partially supported by DARPA under Contracts MDA972-90-C-0037 and MDA972-88-C-0048 and by TRW, Inc.     

A 70-MHz Continuous-Time CMOS Band-Pass ΣΔ Modulator for GSM Receivers

A 70-MHz continuous-time CMOS band-pass modulator for GSM receivers is presented. Impulse-invariant-transformation is used to transform a discrete-time loop-filter transfer function into continuous-time. The continuous-time loop-filter is implemented using a transconductor-capacitor (G _m -C) filter. A latched-type comparator and a true-single-phase-clock (TSPC) D flip-flop are used as the quantizer of the modulator. Implemented in a MOSIS HP 0.5-m CMOS technology, the chip area is 857 m × 420 m, and the total power consumption is 39 mW. At a supply voltage of 2.5 V, the maximum SNDR is measured to be 42 dB, which corresponds to a resolution of 7 bits.     

A Fully Integrated CMOS Phase-Locked Loop with 30 MHz to 2 GHz Locking Range and ±35 ps Jitter

A fully integrated phase-locked loop (PLL) fabricated in a 0.24 m, 2.5 v digital CMOS technology is described. The PLL is intended for use in multi-gigabit-per-second clock recovery circuits in fiber-optic communication chips. This PLL first time achieved a very large locking range measured to be from 30 MHz up to 2 GHz in 0.24 m CMOS technologies. Also it has very low peak-to-peak jitter less than ±35 ps at 1.25 GHz output frequency.     

Multi-Value Voltage-to-Voltage Converter Using a Multi-Stage Symmetrical Charge Pump for On-Chip EEPROM Programming

A fully integrated multi-stage symmetrical structure chargepump and its application to a multi-value voltage-to-voltage converterfor on-chip EEPROM programming are presented. The multi-valuevoltage-to-voltage converter is designed to offer two output voltages,power supply and triple power supply alternatively, which is neededfor a memory array. A dynamic analysis of the multi-stage symmetricalstructure charge pump and an optimization design in terms of circuitarea are also given. The circuit is implemented in a 1.2 CMOSprocess and the measurement results show that a voltage pulse as shortas 5 s with a rise time of 3 s is obtained. For a 5 V powersupply and with a resistive charge of 100 k, the programmingoutput voltage can reach as high as 11 V and output current forprogramming is over 110 A, which are high enough to program thememory cell.     

A CMOS Offset Phase Locked Loop for a GSM Transmitter

This paper describes a CMOS offset phase locked loop (OPLL) for a global system for mobile communications (GSM) transmitter. The OPLL is a PLL with a down-conversion mixer in the feedback path and is used in the transmit (Tx) path as a frequency converter. It has a tracking bandpass filter characteristic in such a way that the OPLL can suppress the noise in the GSM receiving band (Tx noise) without a duplexer. When the loop bandwidth of the OPLL was 1.0 MHz, the Tx noise level of –163.5 dBc/Hz, the phase error of 0.66° rms, and the settling time of 40 s were achieved. The IC was implemented by using 0.35-m CMOS process. It takes 860 m×620 m of total chip area and consumes 17.6 mA with a 3.0 V power supply.