Synthesis and characterization of proton conducting Sr(Ce1−xZrx)0.95Yb0.05O3−δ by the citrate method

The citrate method was used to synthesize Sr(Ce_1−xZr_x)_0.95Yb_0.05O_3−δ (x = 0.1, 0.2, 0.3, 0.4) and to avoid the drawbacks of the conventional solid state reaction method. The products were characterized by thermal analysis (TG-DTA), X-ray diffraction (XRD), scanning electron microscopy (SEM) and electron probe X-ray microanalyzer (EPMA). The results indicate that the citrate method is an advantageous route in producing Sr(Ce_1−xZr_x)_0.95Yb_0.05O_3−δ materials. Sr(Ce_0.9Zr_0.1)_0.95Yb_0.05O_3−δ powders are composed of nanoscaled crystallites with the average grain size in the range of 60–70 nm. Single phase is confirmed over the whole x range. In addition, chemical stability against CO₂ and electrical conduction behavior of the sintered Sr(Ce_1−xZr_x)_0.95Yb_0.05O_3−δ ceramics were investigated. The chemical stability of the ceramics against CO₂ is certified to increase with the increase in zirconium content. Impedance spectroscopy was used to study the electrical conduction behavior of Sr(Ce_0.9Zr_0.1)_0.95Yb_0.05O_3−δ ceramic.     

Bulk and lattice thermal expansion in Ce1−xSrxO2−x (0.0≤x≤0.10)

In this communication, we report on the bulk and lattice thermal expansion studies on a number of compounds, within the homogeneity range of solid solutions, in a series with the general composition Ce_1−xSr_xO_2−x (0.0≤x≤0.10). The XRD pattern of each product was refined to determine the solid solubility of SrO into the lattice of CeO₂, and the homogeneity range. The composition with maximum solid solubility limit of SrO in CeO₂ lattice, under the slow cooled conditions, was delineated as Ce_0.91Sr_0.09O_1.91 (i.e. 9 mol.% of SrO). The bulk thermal expansion measurements from ambient to 1123 K, as investigated by a dilatometer, revealed that the _l (293 to 1123 K) values for the compositions within the homogeneity range increase from 11.58×10⁻⁶ to 12.13×10⁻⁶ K⁻¹ on increasing the Sr²⁺ content from 0 mol.% (i.e. CeO₂) to 9 mol.%, i.e. the upper solubility limit of SrO into the lattice of CeO₂. A similar trend was observed in the lattice thermal expansion coefficients _a (293 to 1473 K) as obtained by a high temperature-XRD.     

Ba4In2−x(CO3)1+xO6−2.5x and Ba4In0.8Cu1.6(CO3)0.6O6.2—new indium oxycarbonates closely related to n=3 Ruddlesden–Popper phases

Investigations of phase relations in the Ba-rich part of the In₂O₃–BaO(CO₂)–CuO pseudo-ternary system at 900 °C have revealed the existence of new indium–copper oxycarbonate – Ba₄In_0.8Cu_1.6(CO₃)_0.6O_6.2. Rietveld refinement of the X-ray powder diffraction data combined with infrared studies gives evidence that this phase is a oxycarbonate crystallising in the tetragonal structure (space group I4/mmm) with unit cell parameters: a=4.0349(1) Å and c=29.8408(15) Å. In the binary part of the In₂O₃–BaO(CO₂) system we have identified the occurrence of Ba₄In_2−x(CO₃)_1+xO_6−2.5x oxycarbonate solid solution showing a crystal structure also described by I4/mmm space group, but with the unit cell parameters: a=4.1669(1) Å and c=29.3841(11) Å for x=1. The existence range of this phase, −0.153<x<0.4, includes chemical compositions of earlier found phases: Ba₅In_2+xO_8+0.5x with 0≤x≤0.45 (known as the -solid solution), as well as the binary Ba₄In₂O₇ phase. The crystal structures of both new oxycarbonates are isomorphic and related to n=3 member of the Ruddlesden–Popper family.     

Power factor of La1−xSrxFeO3 and LaFe1−yNiyO3

The electrical conductivity (σ), Seebeck coefficient (S), and power factor (σS²) of perovskite-type LaFeO₃, La_1−xSr_xFeO₃ [0.1 ≤ x ≤ 0.4] and LaFe_1−yNi_yO₃ [0.1 ≤ y ≤ 0.6] were investigated in the temperature range of 300–1100 K to explore their possibility as thermoelectric materials. The electrical conductivity of LaFeO₃ showed semiconducting behavior, and its Seebeck coefficient changed from positive to negative around 650 K with increasing temperature. The electrical conductivity of LaFeO₃ increased with the substitutions of Sr and Ni atoms, while its Seebeck coefficient decreased. The Seebeck coefficient of La_1−xSr_xFeO₃ was positive, whereas that of LaFe_1−yNi_yO₃ changed from positive to negative with increasing Ni content. The substitutions of Sr and Ni were effective in increasing the power factor of LaFeO₃; 0.0053 × 10⁻⁴ Wm⁻¹ K⁻² for LaFeO₃ (1050 K), 1.1 × 10⁻⁴ Wm⁻¹ K⁻² for La_1−xSr_xFeO₃ (x = 0.1 at 1100 K) and 0.63 × 10⁻⁴ Wm⁻¹ K⁻² for LaFe_1−yNi_yO₃ (y = 0.1 at 1100 K).     

Microstructure and tribological properties of LaxCeyO1 − x − y composite nanofilms

A series of La_xCe_yO_{1 − x − y} films (x = 0–0.54, y = 0–0.58) with thickness of 35–45 nm was deposited by unbalanced magnetron sputtering. High-resolution transmission electron microscope observation shows that La_0.24Ce_0.34O_0.42 film has polycrystalline structure. La₂O₃ and CeO₂ are formed within the La_xCe_yO_{1 − x − y} films confirmed by the X-ray diffraction and X-ray photoelectron microscopy. The friction coefficient and residual compressive stress of five kinds of three-element compound films exhibit symmetric distribution with the relative equilibrium of La and Ce atomic concentration within the films. The critical load of all deposited films is between 28 and 33 mN. The friction coefficient of two kinds of rare earth complex oxide films is in the range of 0.08–0.09, which is lower than that of only one kind of rare earth oxide films, and the friction mechanism is discussed.     

Preparation and structural characterization of perovskite-type LaxLn1−x″CoO3 by the thermal decomposition of heteronuclear complexes, LaxLn1−x″| Co(CN)6| · nH2O (Ln″ = Sm and Ho)

Perovskite-type La_xLn_1−x″CoO₃ oxides are prepared by the thermal decomposition of La_xLn_1−x″ [Co(CN)₆] · nH₂O hetero-nuclear complexes. Except for LaCoO₃ (hexagonal), the structures observed for La_xSm_1−xCoO₃ are othorhombic. While the perovskite-type oxide HoCoO₃ is not formed by decomposition at 1000°C of the corresponding hexacyano complex, the partial replacing of Ho with La is effective in forming the pervoskite-type oxide having an orthorhombic structure containing Ho even at 800°C. A monotonous correlation (quasi-linear relationship) was found between the b- and c-lattice constants of the orthorhombic structures of the perovskite-type oxides and the effective radii of Ln ions, defined as r_eff = xr_1.a + (1 − x)r_1.0″. The distortion parameter for the orthorhombie cell (3″a/b−1) increaseswith decrease in r_eff and is expected to be 0.270 for perovskite-type HoCoO₃. The crystal structure of the La_xLn_1−x″, CoO₃ oxides is mainly controlled by the effective radii of Ln ions.     

Synthesis and properties of lithium ion conductors Li3−2x(Sc1−xZrx)2(PO4)3

Lithium ion conductors, Li_3−2x(Sc_1−xZr_x)₂(PO₄)₃ (0 x 0.3), were prepared by a solid-state reaction. TG–DTA analysis indicated no phase transition in the samples with x superior to 0.05. X-ray powder diffraction analysis of these samples clearly showed the stabilization of a superionic conduction phase at room temperature with an orthorhombic system Pbcn. The highest conductivity was observed for the sample with x=0.05, and ascribed to the stabilization of the superionic conduction phase and the introduction of vacancies on the Li⁺ sites by substituting Zr⁴⁺ for Sc³.     

Tailoring of misfit along interfaces between ZnxMn3−xO4 and Ag

This work is aimed at examining how the tetragonality of Zn_xMn_3−xO₄ spinel structures depends on the chemical composition when Zn_xMn_3−xO₄ is embedded in a metal matrix. The paper focuses on a wide range of Zn_xMn_3−xO₄ precipitates in a Ag matrix with x varying between 0 and 1.5. This variation of x has been obtained by internal oxidation of Ag–2at.%Mn–4at.%Zn in air followed by annealing in vacuo at different temperatures. It will be demonstrated that the Zn concentration x in Zn_xMn_3−xO₄ has a major influence on the interfacial misfit and orientation relation between Ag/Zn_xMn_3−xO₄. The degree of mismatch of 10.4% of 1 1 1 Ag–Mn₃O₄ and 2.4% of Ag–Zn_1.5Mn_1.5O₄ was visualized using the Bragg filtering technique on HRTEM micrographs of those interfaces. It was possible to identify misfit dislocations qualitatively with this technique at 1 1 1 Ag–Zn_xMn_3−xO₄ interfaces with different degree of mismatch.     

Subsolidus phase relation and crystal structure of the PrBa2−xSrxCu3O7±δ system

The PrBa_2−xSr_xCu₃O_7±δ solid solution was investigated by means of X-ray powder diffraction in combination with Rietveld analysis. The Sr-doped Pr123 single phase could be synthesized at 950 °C in air. The solubility of PrBa_2−xSr_xCu₃O_7±δ solid solution is 0.2≤x≤0.6. The structure of PrBa_2−xSr_xCu₃O_7±δ is orthorhombic for x=0.2. The structure transforms into tetragonal for 0.3≤x≤0.6. In the PrBa_2−xSr_xCu₃O_7±δ structure, Sr ions can replace Ba ions, the highest value is x=0.6 under our experimental condition. But Sr ions could not replace Pr ions. Furthermore Pr ions could not occupy the sites of Ba ions in the PrBa_2−xSr_xCu₃O_7±δ system. Both ionic radii and chemical properties play an important role in the mutual substitution of Pr, Ba and Sr ions in the Pr123 structure of the PrBa_2−xSr_xCu₃O_7±δ system.     

Synthesis and characterization of LiGaxMn2−xO4 (0 ≤ x ≤ 0.05) by triethanolamine-assisted sol–gel method

Spinel LiGa_xMn_2−xO₄ (0 ≤ x ≤ 0.05) cathode materials with phase-pure particles and nano-sized distribution were synthesized by sol–gel method using triethanolamine as the chelating agent. The effects of heat treatment on the physicochemical properties of the spinel LiGa_xMn_2−xO₄ powders were examined with thermogravimetric and differential thermal analysis (TG/DTA), powder X-ray diffraction (XRD) and scanning electron micrograph (SEM). The LiGa_xMn_2−xO₄ (0 ≤ x ≤ 0.05) electrodes were characterized electrochemically by charge/discharge experiments under a current rate of 0.5C at 55 °C. Although the Ga-doped spinel electrode showed smaller initial discharge capacity, it exhibited better cycling performance than the undoped-LiMn₂O₄ electrode. The dQ/dV versus potential plots at 55 °C revealed that the improvement in cycling performance of the Ga-doped spinel electrode is attributed to stabilization of the spinel structure by the presence of gallium ion.     

The effects of the combined substitution of Y and Ga on the crystallographic structure of Nd2−xYxFe17−yGay intermetallic compounds

The effects of the combined substitution of Y and Ga on the crystallographic structure of Nd_2−xY_xFe_17−yGa_y compounds with x = 0, 0.5, 1.0, 1.5 and y = 0, 1, 2, 3 have been investigated using X-ray and neutron powder diffractions. Rietveld refinements of the diffraction data indicate that all the samples crystallize in the rhombohedral Th₂Zn₁₇-type structure with only small amounts of alpha iron. It is found that the addition of Ga atoms lessens the decreasing rates of the a-axis and unit cell volume V on the Y content but almost does not affect the decreasing rates of the c-axis. However, the substitution of Y has a positive effect on the increasing rates of the a-axis and unit cell volume V on the Ga content but has a very slight effect on the increasing rate of the c-axis. The c/a ratio of Nd_2−xY_xFe_17−yGa_y as a function of Ga content exhibits a different increase for different Y content owe to the combined effects of Y and Ga on the crystallographic structure. The substitution of Y is found to have little effect on the site occupancy of Ga in Nd_2−xY_xFe_17−yGa_y. The combined effects of Y and Ga on the bond lengths and ASBL of Nd_2−xY_xFe_17−yGa_y indicate that more bonds detrimental to ferromagnetic exchange can be modulated into the desirable ferromagnetic exchange distance range through suitable combined substitution, which provides a valuable way to improve the magnetic properties of rare earth-transition intermetallic compounds.     

Synthesis and properties of Ba3NaRu2O9−δ and Ba3(Na, R)Ru2O9−δ (R=rare earth) crystals

Crystals of Ba₃NaRu₂O_9−δ (δ≈0.5) and Ba₃(Na, R)Ru₂O_9−δ (R=Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm and Yb) were grown by an electrochemical method, and their crystallographic, magnetic, and electric properties were studied. All crystals have a hexagonal structure of space group P6₃mmc. Ba₃NaRu₂O_9−δ and Ba₃(Na, R)Ru₂O_9−δ (except Ce) have a negative asymptotic Curie temperature suggesting the existence of an antiferromagnetic order; however, they are paramagnetic at temperatures above 1.7 K. Ba₃NaRu₂O_9−δ has an effective magnetic moment P_eff of 0.91 μ_B, while P_eff of Ba₃(Na, R)Ru₂O_9−δ (except Ce) reflects the large free-ion moment of the rare earth ions. Ba₃(Na, Ce)Ru₂O_9−δ shows peculiar magnetic behavior that differs from the magnetism of other Ba₃(Na, R)Ru₂O_9−δ crystals. The resistivity of all crystals exhibits an activation-type temperature dependence with an activation energy in the range of 0.10.2 eV.     

The characteristics of Li(CoxNi1 − x)O2 cathode powders formed from the fine-sized Co3O4/NiO precursor powders

Li(Co_xNi_1 − x)O₂ (0 ≤ x ≤ 1) cathode powders were prepared by solid state reaction method using Co₃O₄/NiO precursor powders obtained by spray pyrolysis. The effect of the ratios of cobalt and nickel components on the characteristics of Co₃O₄/NiO precursor and Li(Co_xNi_1 − x)O₂ cathode powders were investigated. The Co₃O₄/NiO precursor powders with the ratios of cobalt and nickel components as 1/0, 0.75/0.25 and 0.5/0.5 had submicron size and regular morphologies. On the other hand, the Co₃O₄/NiO powders with the high contents of nickel component had aggregated morphologies of submicron size primary powders. The fine-sized precursor powders formed the fine-sized LiCoO₂ and Li(Co_0.75Ni_0.25)O₂ cathode powders by solid state reaction with LiOH powders. However, the high contents of the nickel component of the Co₃O₄/NiO precursor powders formed the Li(Co_xNi_1 − x)O₂ (0 ≤ x ≤ 0.5) cathode powders with aggregated morphologies and large sizes. The discharge capacities of the powders increased with increasing the nickel content into the Li(Co_xNi_1 − x)O₂ cathode powders up to 188 mAh/g.     

On the crystal structure of new series of compounds, RPt2+xSb2−y (x = 0.125, y = 0.25; R = La, Ce, Pr)

A new compound CePt_2+xSb_2−y (x = 0.125, y = 0.25) was synthesized by arc-melting of the elements. The chemical and structural characterizations were carried out at room temperature on as-cast samples using X-ray diffractometry, metallographic analysis and EDS-microanalysis. According to the results of X-ray single crystal diffraction this antimonide crystallizes in I4cm space group (no. 108), Z = 32, ρ = 12.19 Mg/m³, μ = 89.05 mm⁻¹ (a = 12.5386(3) Å, c = 21.4692(6) Å (crystal I) and a = 12.5455(2) Å, c = 21.4791(5) Å (crystal II)). The structure and composition were confirmed by powder X-ray diffraction (a = 12.4901(2) Å, c = 21.3620(4) Å) and EDS-microanalysis respectively. Isotypic compounds were observed with La and Pr from X-ray powder diffraction of as-cast alloys at room temperature (a = 12.6266(4) Å, c = 21.4589(6) Å for LaPt_2+xSb_2−y and a = 12.5184(5) Å, c = 21.4178(7) Å for PrPt_2+xSb_2−y). The CePt_2+xSb_2−y structure is derived from CaBe₂Ge₂ (a = 2a₀ − 2b₀, b = 2a₀ + 2b₀, c = 2c₀) and comprises a new atomic arrangement with both vacancy on 4(b) pyramidal site and substitution of antimony atoms (X) by platinum (B) in the B–XX–B layers (referring to the subcell structure) forming two B––1/2B1/2XX–3/4B and two X–BB–X layers per cell. The structure of CePt_2+xSb_2−y is compared with those reported before for URh_1.6As_1.9 and CeNi_1.91As_1.94.     

Temporal evolution of the nanostructure of Al(Sc,Zr) alloys: Part I – Chemical compositions of Al3(Sc1−xZrx) precipitates

Atom-probe tomography (APT) and high-resolution transmission electron microscopy are used to study the chemical composition and nanostructural temporal evolution of Al₃(Sc_1−xZr_x) precipitates in an Al–0.09 Sc–0.047 Zr at.% alloy aged at 300 °C. Concentration profiles, via APT, reveal that Sc and Zr partition to Al₃(Sc_1−xZr_x) precipitates and Zr segregates concomitantly to the -Al/Al₃(Sc_1−xZr_x) interface. The Zr concentration in the precipitates increases with increasing aging time, reaching a maximum value of 1.5 at.% at 576 h. The relative Gibbsian interfacial excess of Zr, with respect to Al and Sc, reaches a maximum value of 1.24 ± 0.62 atoms nm⁻² after 2412 h. The temporal evolution of Al₃(Sc_1−xZr_x) precipitates is determined by measuring the time dependence of the depletion of the matrix supersaturation of Sc and Zr. The time dependency of the supersaturation of Zr does not follow the asymptotic t^−1/3 law while that of Sc does, indicating that a quasi-stationary state is not achieved for both Sc and Zr.     

Physical properties of Mo6−xRuxTe8 and Mo6Te8−xSx

A series of the Chevrel phases, Mo_6−xRu_xTe₈ and Mo₆Te_8−xS_x (x=0, 1, 2), has been prepared and the various physical properties, such as the elastic modulus, Debye temperature, and electrical resistivity, have been evaluated. The relationships between several properties of the compounds have also been studied. Young’s modulus and Debye temperature of Mo_6−xRu_xTe₈ and Mo₆Te_8−xS_x increase with increasing x value. The relationship between the Vickers hardness and Young’s modulus shows ceramic characteristics for Mo_6−xRu_xTe₈, while they show glass-like characteristics for Mo₆Te_8−xS_x. The electrical resistivities of Mo_6−xRu_xTe₈ and Mo₆Te_8−xS_x increase with increasing x value.     

Preparation and structures of the La1−xKxCo1−xNbxO3 (x = 0–l) system

The La_1−xK_xCo_1−xNb_xO₃ system was performed by conventional solid state reaction technique using metal oxides. By DSC analysis, the activation energy of crystallization of the powders with x = 0.3 is 388.4 kJ/mol. The crystal structure of the compound reveals a transition from rhombohedral to cubic, and then to orthorhombic structure as the amount of the potassium niobate (KNbO₃) increases. It is found that the structure of the samples with x < 0.3 is similar to that of lanthanum cobaltate (LaCoO₃), while at the compositions with 0.7 ≥ x ≥ 0.3, the structure transforms to cubic. Finally, with x ≥ 0.7, the structures were similar to that of KNbO₃. According to the results of selected-area-diffraction (SAD) patterns and X-ray diffraction (XRD) identifications, the lattice parameters were calculated. The direction of superlattice structure along [2 1 0] was found for x = 0.5 as identified from SAD patterns. The dielectric constants were measured with cubic structure. Dielectric constant (K) decreases with increasing x.     

Magnetic phase diagrams of the TbRh2−xPdxPdxSi2 and TbRu2−xPdxSi2 systems

The a.c. susceptibility and high field magnetization on TbRh_2−xPd_xPd_xSi₂ and TbRu_2−xPd_xSi₂ compounds were investigated up to 140 kOe. The (T,x) magnetic phase diagrams were determined. For both systems, an increase in the Pd content causes a decrease in the Néel temperature and changes the magnetization curves.     

Structural, magnetic and magnetostrictive studies of Tb0.27Dy0.73(Fe1 − xAlx)2

Measurements of magnetic properties, X-ray diffraction and magnetostriction were made on Tb_0.27Dy_0.73(Fe_{1 − x}Al_x)₂ (x = 0.1, 0.2, …, 0.7) compounds. It was found that the system has the cubic MgCu₂ structure over almost the whole (Fe,Al) concentration range investigated, except for a narrow intermediate range (x = 0.4–0.6) where the hexagonal MgZn₂ structure appears. With increasing Al content x, the lattice constant a increases linearly with x. The first replacement of Fe results in a marked decrease in the Curie temperature, which is followed by a slight decrease in T_C with x. A linear decrease in magnetostriction of |λ_| − λ| at room temperature with x was also observed from 1530 × 10⁻⁶ for x=0 to 36×10⁻⁶ for x=0.3. The saturation magnetization σ_s exhibits a complex concentration dependence in the Tb_0.27Dy_0.73(Fe)_{1 − x}Al_x)₂ system: in the range x < 0.5, σ_s increases linearly with x and, for x = 0.5–0.6, σ_s decreases and then increases again. An enhancement of the magnetic ‘hardness’ in this system was also observed at low temperature.     

Photoelectrochemical study of lanthanide zirconium oxides, Ln2Zr2O7 (Ln = La, Ce, Nd and Sm)

Photocatalytic activities for hydrogen evolution of lanthanide zirconium oxides, Ln₂Zr₂O₇ (Ln = La, Ce, Nd and Sm) prepared by a solution reaction method were investigated. Under the illumination of 500 W Xenon lamps, hydrogen gas was clearly evolved in a distilled water suspension of La₂Zr₂O₇, Sm₂Zr₂O₇ and Nd₂Zr₂O₇. Under the visible-light illumination, hydrogen gas was evolved in a distilled water suspension of Nd₂Zr₂O₇ and Sm₂Zr₂O₇. From the photoelectrochemical measurements, the values of the flat band potential were estimated to be −0.64, −0.52, −0.31 and +0.04 eV for La₂Zr₂O₇, Sm₂Zr₂O₇, Nd₂Zr₂O₇ and Ce₂Zr₂O₇, respectively, versus the normal hydrogen electrode (NHE). The values of the band gap energy were calculated to be about 3.52, 2.86, 2.67 and 2.53 eV for La₂Zr₂O₇, Sm₂Zr₂O₇, Nd₂Zr₂O₇ and Ce₂Zr₂O₇, respectively. Due to the effect of 4f orbital electrons, the band gap energy of these compounds becomes narrower than in ZrO₂ and as a consequence, Sm₂Zr₂O₇ and Nd₂Zr₂O₇ show the photocatalytic activity under the visible-light.