Efficacy of polyethylene-based antimicrobial films containing principal constituents of basil

The feasibility of low-density polyethylene (LDPE)-based films containing linalool or methylchavicol as antimicrobial (AM) packages to retard microbial growth on food surfaces was investigated. The AM LDPE-based films were tested for inhibition against selected microorganisms. Both compounds retained their AM activity, after an extrusion film-blowing process, against Escherichia coli in solid medium. Cheddar cheese was wrapped with the AM films and the packaged cheese samples were stored at 4 °C. The changes in the mesophilic aerobic bacteria and coliform, as well as yeast and mould counts were monitored. In addition, cheese samples inoculated with E. coli or Listeria innocua were wrapped with the AM films, stored at refrigerated (4 °C) or at abuse (12 °C) temperatures and the count of these microorganisms was monitored as a function of time. The results showed an inhibitory effect of these AM films against microbial growth in naturally contaminated cheese and in inoculated samples. The effect on suppression of E. coli and L. innocua growth was more pronounced at the abuse temperature. Methylchavicol-LDPE-based film exhibited a higher efficacy of inhibition than that of linalool-LDPE-based film. In addition, a sensory evaluation was performed with regards to possible taint in the flavour of the cheese. Taint in flavour as affected by linalool or methylchavicol was not significantly detectable by the panelists at the end of the storage period of 6 weeks. This study shows the potential use of polymeric films containing the principal constituents of basil as the AM components for enhancing quality and safety of cheeses.     

Influence of Storage Time and Temperature on Absorption of Flavor Compounds from Solutions by Plastic Packaging Materials

ABSTRACT: Linear low-density polyethylene (LLDPE), oriented polypropylene (OPP), polycarbonate (PC), polyethylene terephthalate (PET film and PET bottle), and polyethylene naphthalate (PEN) were stored in a model solution containing 10 flavor compounds at 4, 20, and 40 °C and flavor absorption by the plastic materials was followed in time. The absorption rate and/or total amount absorbed increased considerably with temperature from 4 to 40 °C. Depending on storage temperature, total flavor absorption by the polyolefins (LLDPE and OPP) was 3 to 2400 times higher than by the polyesters (PC, PET, and PEN). Therefore, in the factor of flavor absorption, polyesters are preferred over polyolefins as packaging material.     

Diffusion of linalool and methylchavicol from polyethylene-based antimicrobial packaging films

The diffusion of linalool and methylchavicol from thin (45-50 μm) antimicrobial low-density polyethylene-based films was evaluated after immersion in isooctane and the effect of temperature (4, 10, or 25 °C) on the diffusion rate was evaluated. The kinetics of linalool and methylchavicol release showed a non-Fickian behavior at the lowest temperature. An increase in temperature from 4 °C to 25 °C resulted in an increase in the diffusion coefficient from 4.2 × 10⁻¹³ m² s⁻¹ to 2.5 × 10⁻¹² m² s⁻¹ for linalool and from 3.5 × 10⁻¹³ m² s⁻¹ to 1.1 × 10⁻¹² m² s⁻¹ for methylchavicol. The effect of temperature on the diffusion coefficient followed an Arrhenius-type model (r² = 0.972) in relation to a time-response function with a Hill coefficient. Activation energies of 57.8 kJ mol⁻¹ (linalool) and 42.8 kJ mol⁻¹ (methylchavicol) were observed.     

Evaluation of biodegradable film packaging to improve the shelf-life of Boletus edulis wild edible mushrooms

The objective of this work was to evaluate the effect of poly(lactic acid) (PLA) based biodegradable film packaging combining 0.5% nisin antimicrobial polypeptide on the physicochemical and microbial quality of Boletus edulis wild edible mushrooms stored at 4 ± 1 °C. The experiment was set up by packaging mushrooms with extruded PLA films containing 0, 7.5, and 15 wt.% triethyl citrate plasticizer. The low-density polyethylene (LDPE) film was used as the control. Mushrooms stored in PLA films containing 7.5 and 15 wt.% plasticizer provided better retention of quality characteristics and received higher sensory ratings compared to mushrooms stored in pure PLA film and LDPE film. Samples with these two treatments underwent minimal changes in texture, PPO activity, total bacteria count, and sensory attributes. Results suggest that nisin in combination with plasticized PLA film has the potential to maintain B. edulis wild edible mushroom quality and extend its postharvest life to 18 days.Industrial relevanceB. edulis is one of the most commercialized mushrooms worldwide. However, as with all fresh mushrooms, there are severe preservation problems. Extruded PLA films containing triethyl citrate plasticizer plus antimicrobial agent nisin proved to be a suitable technology for mushroom conservation. This material exhibits an environmental-friendliness potential and a high versatility in food packaging.     

The antimicrobial activity of microencapsulated thymol and carvacrol

The aim of the present study was to determine the antimicrobial (AM) properties of plastic flexible films with a coating of microcapsules containing carvacrol and thymol as natural AM agents. Microencapsulation of these agents enables their controlled release and leads to the destruction (or growth inhibition) of a broad spectrum of microorganisms such as, Escherichia coli O157:H7, Staphylococcus aureus, Listeria innocua, Saccharomyces cerevisiae and Aspergillus niger. It was found that the studied AM agents are strong inhibitors to the growth of mycelium, but they were not effective against spore germination of mold. Thymol (T) and carvacrol (C) showed a significant AM activity against the studied microorganisms, with minimal inhibitory concentrations (MIC) of 125-250 ppm and 75-375 ppm for thymol and carvacrol respectively. The synergistic effect of combinations of thymol and carvacrol was also studied and it was found that the highest synergism was achieved at a concentration of 50% T and 50% C. The release of the AM agents was carried out at 4 °C during 28 days. The concentration of the microencapsulated AM agents showed a range of zones of inhibition of 4.3-11.3 mm for the microorganisms at 10% of thymol and 10% of carvacrol. At these concentrations the release of the AM agents (within 48 h) was greater than required for the most resistant microorganism (E .coli O157:H7), as reflected by the relatively large zone of inhibition. The results of the present study confirm the suitability of using microencapsulated thymol and carvacrol incorporated in polymer films for AM food packaging.     

Characterization of antimicrobial polylactic acid based films

Olive leaf extract (OLE) (Olea europaea L.), which has antimicrobial effect on many food pathogens, was incorporated as antimicrobial agent into polylactic acid (PLA) films. Antimicrobial activities of films were tested against Staphylococcus aureus. Increasing amount of the OLE in the film discs from 0.9 mg to 5.4 mg caused a significant increase in inhibitory zones from 9.10 mm to 16.20 mm, respectively. Moreover, incorporation of OLE and/or increasing the amount in the film formulation significantly enhanced the water vapor permeability (WVP). The water solubility and the degradation rates of films increased up to 19.3% and 22.4%, respectively. Thus, OLE incorporated PLA films have a prospectively potential in antimicrobial food packaging to reduce post-process growth of S. aureus with improved properties.     

Barrier property and penetration traces in packaging films against Plodia interpunctella (Hübner) larvae and Tribolium castaneum (Herbst) adults

The barrier property of different types of plastic film (with or without pinholes) against two insects, Plodia interpunctella (Hübner) larvae and Tribolium castaneum (Herbst) adults, and the morphology of damage produced in these insects were investigated. Using a penetration apparatus, four types of plastic films varying in thickness were used for insect-penetration tests: casted polypropylene, 20 μm and 25 μm (CPP20 and CPP25); oriented polypropylene, 20 μm and 30 μm (OPP20 and OPP30); linear low-density polyethylene, 40 μm and 50 μm (LLDPE40 and LLDPE50); and polyethylene terephthalate 12 μm and 16 μm (PET12 and PET16). After being fixed and tested in the penetration apparatus, each film was cut into a disc shape and 10 holes (200 μm diameter) were made by a pin. The shape of film damage and the mouthparts of insects were observed using scanning electronic microscopy. Plodia interpunctella larvae could penetrate all films with pinholes, while T. castaneum adults were unable to penetrate any of the films tested, even those with pinholes. The penetration-percentages by P. interpunctella larvae were 38% (LLDPE40), 3% (LLDPE), 53% (CPP20), 37% (CPP25), 63% (OPP20), 43% (OPP30), 83% (PET12) and 63% (PET16). The elongation value, tensile strength and thickness of film were important factors in the penetration test. LLDPE, which has the highest elongation value and the lowest tensile strength value, was the film that best protected against insect penetration. In CPP and LLDPE films, there were many scratches and tears around the holes. In comparison, much less damage was observed around the holes in OPP and PET films. By observing the mouthparts of insects, it was determined that P. interpunctella larvae had sharper mandibles than those of T. castaneum adults.     

Changes in post-harvest phytochemical qualities of broccoli florets during ambient and refrigerated storage

The effect of ambient and refrigerated storage temperature on post-harvest phytochemical qualities of broccoli florets was investigated during storage. Fresh broccoli florets were packed in polypropylene (PP) micro-perforated film bags and stored, under open ambient storage conditions (15 ± 1 °C, 55 ± 2% RH), and laboratory refrigerated storage (4 ± 0.5 °C, 50 ± 2% RH) for a total period of 144 h. Quality of broccoli florets was evaluated in terms of physiological weight loss (PLW), ascorbic acid content, chlorophyll content, β-carotene and total antioxidant activity. Samples packed in PP micro-perforated film showed significantly (P < 0.05) lower losses of PLW, ascorbic acid, chlorophyll, β-carotene and total antioxidant activity (5.51%, 4.53%, 18.9%, 4.04% and 16.4%, respectively), during storage for up to 144 h under refrigerated conditions. For better phytochemical retention, the broccoli florets should be packed in PP micro-perforated film bags and stored under refrigerated conditions.     

Release of Naturally Derived Antimicrobial Agents from LDPE Films

ABSTRACT: The migration of the naturally derived antimicrobial (AM) agents, linalool, carvacrol, and thymol, from low-density polyethylene (LDPE) films containing ethylene vinyl acetate (EVA) copolymer into the food simulants, isooctane and various ethanol/water mixtures, was studied with a view towards examining the applicability of a first-order kinetic approach as well as a diffusion model approach for describing these systems. The results suggest that the proposed models adequately describe the release of AM agents. The combination of kinetic and diffusion analyses can provide additional information about the release process using the same data set. The analyses suggest that the release of linalool from LDPE/EVA depends on the EVA content in the formulation and that an optimum level of EVA is required to minimize the rate of release. A modification of the existing “idealized diffusion” model is proposed that enables the model to be applied to systems that demonstrate a departure from linearity when subjected to conventional analysis. The applicability of the idealized diffusion model was compared with the “simulant-limited” model and the results suggest that the former model is appropriate for describing most real systems when the simulant (or foodstuff) is favored in the partitioning of the AM agent between the film and the simulant.     

Study of the retention and release of n-hexanal incorporated into soy protein isolate–lipid composite films

This work deals with the study of the kinetic of aroma release, which had been previously incorporated into soy protein isolate (SPI)–lipid composite films. The aim was to determine the influence of type and amount of lipidic material on aroma (n-hexanal) release and retention, as well as the apparent diffusion coefficients. To carry out this study it have been employed SPI-based films containing two SPI:LIPID ratios (1:0.25 and 1:0.5), and two types of lipids, oleic acid (OA) and beeswax (BW), in OA:BW ratios 100:0, 70:30, 50:50, 30:70 and 0:100. The measurements were performed by a gas chromatography technique. The films that showed more retention were SPI:LIPID 1:0.5 100% BW and control film. Concerning release rate, films containing BW as unique lipid material gave the lowest aroma release rate. Apparent diffusion coefficients (D_app) of all films are in the same order of magnitude (10⁻¹⁵ m² s⁻¹). D_app decreases when BW increases in the film matrix and when oleic acid amount decreases. In conclusion, for encapsulating n-hexanal, SPI-BW films demonstrated the best performances, followed by control film (without lipids).     

Incorporating phenolic compounds opens a new perspective to use zein films as flexible bioactive packaging materials

To eliminate their classical brittleness and flexibility problems zein films were plasticized by incorporation of different phenolic acids (gallic acid (GA), p-hydroxy benzoic acid (HBA) or ferulic acids (FA)) or flavonoids (catechin (CAT), flavone (FLA) or quercetin (QU)). The use of GA, CAT, FA and HBA at 3 mg/cm² eliminated the brittleness of films and gave highly flexible films showing elongations between 135% and 189%, while FLA and QU caused no considerable effect on film elongation. The films containing FA and HBA showed extreme swelling and lost their structural integrity when hydrated in distilled water. In contrast, CAT and GA containing films maintained their integrity following hydration. Most of the GA (up to 93%) and a considerable portion of CAT (up to 60%) in the films existed in soluble form. Therefore, the films showed antioxidant and/or antimicrobial activity. The TEACs of soluble phenolic compounds in 3 mg/cm² CAT and GA containing films were 21.0 and 86.2 ??mol trolox/cm², respectively. The GA containing films showed antimicrobial activity on Listeria monocytogenes and Campylobacter jejuni, while CAT showed no antimicrobial activity on these bacteria at the studied concentration. This work opens a new perspective for using zein in flexible bioactive packaging.     

Postharvest Quality of Fresh-Cut Carrots Packaged in Plastic Films Containing Silver Nanoparticles

Active food packaging containing antimicrobial additive goes beyond traditional functions of packaging, once it can extend food shelf life maintaining its quality, safety and reducing postharvest losses by controlling food spoilage. Among several antimicrobial additives employed in polymeric films for packaging, metallic nanoparticles outstand due to its facility for synthesis, low-cost of production, and intense antimicrobial properties. In this work, extruded plain films of low-density polyethylene (LDPE) containing silver nanoparticles (AgNPs) embedded in SiO₂ and TiO₂ carriers (namely MS and MT, respectively) were produced and used as active packaging for maintaining the physicochemical and microbiological quality of carrots (Daucus Carota L. cv. Brasília). The neat (LDPE) and composite films containing MS and MT were characterized by scanning electron microscopy and permeability to oxygen and used for packaging fresh-cut sliced carrots stored at 10 °C for 10 days. After the storage time, the physicochemical properties of carrots were characterized, while the antimicrobial properties of films and AgNP migration were investigated. Our results revealed that both MT and MS packages showed antimicrobial activity even for films containing low concentration of AgNP. In addition, AgNP antimicrobial activity demonstrated to be carrier-dependent, once MT-LDPE showed improved performance compared to MS-LDPE. Regarding the physicochemical properties of packaged carrot, lower soluble solids and weight loss and higher levels of ascorbic acid were observed for carrots packaged with MT-LDPE films (compared to MS-LDPE), leading to a better postharvest quality conservation. Such differences observed in physicochemical properties of carrots are related to the distinct antimicrobial and film permeability properties for each composite film. In addition, under the conditions employed in this study, AgNP migration from the packages to fresh-cut carrot was not observed, which is highly desirable for food packaging safety, indicating the potential of such active packages for food preservation application.     

Aroma enrichment and the change during storage of non-aromatic milled rice coated with extracted natural flavor

Three non-aromatic rice varieties (RD23, SPR1 and SPR90) were coated in a modified spouted bed with 30% sorbitol-plasticized rice-starch film containing 25% pandan (Pandanus amaryllifolius Roxb.) leaf extract produced by the supercritical fluid with carbon dioxide extraction method. The coated and uncoated samples and uncoated aromatic rice (KDML and PTT1 varieties) were packed in plastic bags (nylon15/PE20/LLDPE75) and stored at 25 °C for 6 months. Gas chromatography–mass spectrometry analysis revealed that the coating treatment resulted to similar flavor volatile profile as that of aromatic varieties, particularly the presence of 2-acetyl-1-pyrroline (ACPY) which is the main volatile compound responsible for the jasmine aroma. ACPY was absent in uncoated non-aromatic rice and ACPY content of non-aromatic rice coated with natural pandan extract was lower than that of uncoated aromatic rice. During storage, ACPY levels decreased. Coated non-aromatic rice retained higher ACPY levels than the aromatic PTT1 variety. The coating treatment also reduced the n-hexanal content of stored grains. Thus, the coating technique is a promising approach for rice aroma improvement and at the same time, for reducing the potential for oxidative rancidity during grain storage.     

Physical and antimicrobial properties of Gelidium corneum/nano-clay composite film containing grapefruit seed extract or thymol

To improve the physical properties of Gelidium corneum (GC) film, Cloisite Na⁺ and 30B were incorporated into the preparation of the film. X-ray diffraction patterns of the films indicated that a degree of exfoliation and intercalation are formed depending on the type of nano-clays and its concentration and the film structure affects the physical properties of the GC/nano-composite films. Tensile strength (TS) of the GC film was increased by the addition of nano-clays. GC film had a TS of 19.59 MPa for the control, while the GC film having 3% Cloisite Na⁺ or 30B had TS of 27.37 and 26.40 MPa, respectively. Elongation at break and water vapor permeability were also improved by the addition of 3% nano-clays. The physical properties of the film were not improved by the addition of GSE or thymol, but the additions did inhibit the growth of Escherichia coli O157:H7 and Listeria monocytogenes. The results suggest that the nano-composite films containing GSE or thymol may extend the shelf life of food.     

The effects of brined onion extracts on lipid oxidation and sensory quality in refrigerated cooked turkey breast rolls during storage

The effects of brined onion extracts on selected aspects of quality in cooked encased turkey breast rolls were evaluated during refrigerated storage over 7 days. Using the thiobarbituric acid (TBA) assay, a 50% strength juice gave a significant reduction (P < 0.0001) in lipid oxidation in both 100 g and 1 kg rolls relative to controls. Quercetin, the main onion juice antioxidant, was reduced by 65% in freshly cooked 1 kg rolls compared with raw rolls but changed little thereafter in storage. Cook yields were significantly higher for rolls containing added onion extracts than for controls (P < 0.05) but no colour differences were detected using Hunter Lab values (P ? 0.05). A 30-member untrained sensory panel expressed no preference for freshly opened 4 day-stored control or onion extract-supplemented rolls packed in plastic casings but there was a significant preference (P < 0.05) for the onion extract product when 4 mm thick meat slices were stored in air for an additional 24 h.     

Effect of drying and storage conditions on caffeic acid derivatives and total phenolics of Echinacea Purpurea grown in Taiwan

Fresh flowers, leaves, stems and roots of Echinacea purpurea were subjected to vacuum freeze-drying, cool wind-drying (30 °C), and hot air-drying (40, 55 or 70 °C), and then stored under different environmental conditions. The cichoric acid was the main phenolic compound detected in dried E. purpurea materials, followed by caftaric acid. The bioactive constituent contents in different plant parts were in the descending order: flowers > leaves > stems > roots. Both caffeic acid derivatives and total phenolics contents were affected by drying method and storage condition. Cool wind-dried materials retained more bioactive constituents content (>85%) compared to vacuum freeze-dried materials. The packing material also affected the storability of E. purpurea materials. The storability results indicated that the freeze-dried E. purpurea materials sealed in polyethylene terephthalate/aluminum foil/polyethylene or nylon/polyethylene bags and stored under 10–20 °C and 40–60% relative humidity without light conditions retained the highest content of bioactive compounds.     

Characteristics of moisture-absorbing film impregnated with synthesized attapulgite with acrylamide and its effect on the quality of seasoned laver during storage

Moisture-absorbing film impregnated with synthesized attapulgite with acrylamide (ATPGAA) was developed. The effects of ATPGAA concentrations of 0.5%, 1%, 2%, and 4% (w/w) in a linear low-density polyethylene polymer (LLDPE) matrix on the film properties were determined by measuring the physical properties, the oxygen and water vapor barriers, and moisture absorbency. The 4% ATPGAA film had high moisture absorbing efficiency. A packaging system fabricated from ATPGAA-impregnated films was applied to a dried-seasoned laver to evaluate its change in quality during storage. Seasoned laver packaged with ATPGAA-impregnated films had significantly greater crispness in texture and a lower peroxide value during storage than that packed with LLDPE film. The surface color of the seasoned laver packaged by ATPGAA-impregnated films was more stable than the control film. This study shows that moisture-absorbing films could serve as a packaging system to improve the storage quality of moisture-sensitive products.     

Controlled release of α-tocopherol,quercetin, and their cyclodextrin inclusion complexes from linear low-density polyethylene (LLDPE) films into a coconut oil model food system

Polymer additive migration into a food product is dependent upon numerous factors including the original concentration of the additive in the polymer, its solubility in the food, its diffusion coefficient in the polymer, its partition coefficient between the polymer and food, temperature, and time. The limited solubility of quercetin in linear low-density polyethylene (LLDPE) did not allow release from the film due to phase segregation of the quercetin in the bulk polymer. Increasing the molecular weight of α-tocopherol by β-cyclodextrin inclusion complexation can greatly reduce its diffusion coefficient in LLDPE. Ziegler–Natta and metallocene LLDPE contain different crystalline structure morphologies and diffusion path networking arrangements that allow for differences in additive release rates. Effective controlled-release packaging should combine β-cyclodextrin complexation of additives and polymer morphology control to target delivery of an optimal antioxidant concentration to achieve prolonged activity, resulting in extended shelf life foods.     

Physico-chemical properties,morphology and antioxidant activity of film from fish skin gelatin incorporated with root essential oils

The influences of three root essential oils (ginger, turmeric and plai) at different levels (25%, 50% and 100%, based on protein content) on properties and antioxidative activity of fish skin gelatin-based film were investigated. Films incorporated with all essential oils showed the lower tensile strength (TS) but higher elongation at break (EAB) with increasing amount of essential oils, compared with the control film (without oil incorporated), regardless of types of essential oil (p < 0.05). Water vapor permeability (WVP) of films containing essential oils decreased as the amount of essential oils increased (p < 0.05). Decreases in L^*-value and increases in b^*-, ΔE^*- and transparency value were observed with increasing amount of essential oils incorporated (p < 0.05). FTIR spectra indicated that films added with essential oils, especially from plai root, exhibited higher hydrophobicity than the control film, as evidenced by higher amplitude at wavenunber of 2877–2922 cm⁻¹ and 1732 cm⁻¹. Lower degradation temperature was obtained in films containing essential oils. Microstructural study revealed that bilayer films could be formed when essential oils at level above 50% were incorporated. Film incorporated with plai and turmeric essential oils showed the higher DPPH and ABTS radical scavenging activity, respectively, (p < 0.05), compared with the control film and ginger essential oil added film. Thus, the incorporation of root essential oils directly affected properties of fish skin gelatin-based film, depending on types and levels incorporated.     

Preparation of active antimicrobial methyl cellulose/carvacrol/montmorillonite nanocomposite films and investigation of carvacrol release

Methyl cellulose (MC)/carvacrol (CRV)/montmorillonite (MMT) nanocomposite films were prepared to obtain active antimicrobial packaging materials. The characterization of film samples by X-ray diffraction and transmission electron microscopy showed that composite films were of nano structures. CRV addition to the MC film and MC/MMT nanocomposite films led to a decrease in the thickness and opacity values of them, whereas MMT addition to the film matrix caused an increase in these values. Thermal stability of films slightly increased with increasing MMT concentration in film matrix. CRV release from films was investigated at different temperatures for 30 days. An increase in the MMT concentration matrix caused a decrease in CRV release at 25.0 ± 0.5 °C and in 60 ± 4% relative humidity (RH). CRV release increased with temperature at a constant RH. The antimicrobial activities of films were tested against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) by the microatmosphere method and these organisms were completely inhibited on the nutrient broth/bacteriological agar medium when film samples containing 11.1 ± 0.2 mg CRV were present. MC/CRV film and MC/CRV/MMT-60% nanocomposite films on sausage reduced E. coli and S. aureus counts by 0.9 and 0.7 log cfu/mL, respectively, compared to the control film. The amount of CRV release from developed antimicrobial films can be controlled by MMT concentration within the film matrix and by the storage temperature of film.