侧链胆甾液晶聚合物及弹性体的液晶性能研究

把胆甾液晶单体 4 烯丙氧基苯甲酸胆甾醇酯 (Mch)分别和向列液晶单体 4 烯丙氧基苯甲酰氧基 4′ 甲氧基苯 (Mn) ,向列液晶交联剂 2 叔丁基对苯二酚双 [4 (6 丙烯酰氧基己氧基 )苯甲酸酯 ](Mnc)接枝到聚硅氧烷链上 ,得到系列侧链液晶聚合物Pn 系列和液晶弹性体Pe 系列 .通过热分析、偏光显微分析和X 射线分析等手段分别研究了向列液晶单体和向列液晶交联剂对含同一胆甾液晶基元聚合物的影响 .结果表明 ,向列液晶单体的摩尔百分比在 80 %以下 ,液晶聚合物Pn 系列为胆甾型液晶 ,在研究的范围内 ,液晶弹性体Pe 系列也为胆甾型液晶 ,Pn 系列和Pe 系列都具有较宽的液晶相范围 ,热分解温度均在 2 80℃以上 .     

燕尾型手性侧链液晶聚合物的合成与性能

合成了燕尾型液晶单体4-(3,5-二乙酰氧基)苯甲酰氧基-4′-对烯丙氧基苯甲酰氧基联苯(M),手性液晶单体4-烯丙氧基苯甲酰氧基异丙酰氧基胆甾基酯(N),将它们与聚甲基含氢硅氧烷接枝共聚,得到燕尾型手性侧链液晶聚合物PW1~PW6。通过红外、核磁共振、差示扫描量热、偏光显微镜和热重分析等手段对所合成单体及聚合物的结构、液晶相行为及热稳定性进行了研究。结果表明,PW1~PW6为互变胆甾相热致液晶,升降温均呈现彩色Grandjean织构,液晶区间宽泛在102~160℃之间,5%热失重温度达303℃以上,热稳定性良好。     

基于原子转移自由基聚合技术的偶氮苯星形液晶聚合物的合成与表征

利用原子转移自由基聚合(ATRP)技术合成了含不同端基取代基的偶氮苯三臂星形侧链液晶聚合物. 均苯三酚与2-溴异丁酰溴通过酯化反应制备三官能团引发剂, 引发偶氮苯单体6-[4-(4-甲氧基苯基偶氮)酚氧基]己基甲基丙烯酸酯(MMAzo)或6-[4-(4-乙氧基苯基偶氮)酚氧基]己基甲基丙烯酸酯(EMAzo)的ATRP反应. 利用核磁共振氢谱(¹H NMR)、凝胶色谱(GPC)、差示扫描量热法(DSC)和偏光显微镜(POM)等手段对星形聚合物进行表征. 星形聚合物的液晶性与相应均聚物相似, 但偶氮苯端基取代基的不同导致星形聚合物的液晶性差别显著. 在紫外/可见光照射下星形聚合物呈现明显的异构化转变.     

以对-(4-烯丙氧基苯甲酰氧基)苯甲酸对-甲氧基苯酚酯为单体的液晶聚硅氧烷的合成与表征

侧链型液晶聚合物是目前很有兴趣的研究课题之一。在国内,有关的研究报道也逐渐增多,本工作设计并合成了对-(4-烯丙氧基苯甲酰氧基)苯甲酸对-甲氧基苯酚酯单体,其结构式为:     

新型含苯甲醚基团的向列型聚硅氧烷侧链液晶的合成与表征

采用硅氢加成反应将刚性液晶基元4-(4-烯丙氧基)苯甲酰氧基-4’-甲氧基苯酚酯(1)接枝到聚硅氧烷主链上,合成了一个新型的含苯甲醚基团的向列型聚硅氧烷侧链液晶聚合物(2),其结构和性能经1H NMR,IR,偏光显微镜,XRD,DSC和TGA表征和研究。结果表明,1和2呈现出向列相液晶的彩色条带织构。1的液晶区间为59.47℃,失重5%所对应的温度为225.4℃;2的液晶区间为183.12℃,失重5%所对应的温度为355.7℃;2较1有更宽的液晶区间和更高的热稳定性。     

聚酰亚胺类液晶光定向层材料的研究

经含有羟基的二胺单体HAB与二酐单体 4 ,4′ (六氟异丙基 ) 双邻苯二甲酸酐 ( 6FDA)的缩聚反应 ,制备了含有羟基的先驱聚合物PI OH ,通过PI OH上羟基与肉桂酰氯的酯化反应 ,制备了侧链带有肉桂酸酯基团的光敏聚酰亚胺PI CI.用氢核磁共振 ( 1H NMR)分析、傅立叶红外光谱 (FTIR)分析等表征了上述聚合物的结构与感光性能 .用紫外 可见光谱 (UV Vis)等方法研究了PI CI的光交联反应 .聚合物PI CI旋镀膜经线性偏振光聚合技术 (LPP)处理并装配得到的液晶盒可使液晶分子很好地定向沿面排列 .上述实验表明 ,本文所合成的聚酰亚胺定向层材料是一种新的液晶光定向层材料     

冠醚侧链液晶聚硅氧烷配体及其钠配合物的研究

本文以二茂基二氯化铂为催化剂,使含液晶基元的单体4-(烯丙基氧)-4'-(4'-羧基苯并15-冠-5)-α,ω-二苯氧丁烷和聚甲基硅氧烷进行硅氢加成反应,合成了一种新的冠醚侧链液晶聚硅氧烷配体及其钠配合物。采用DSC和偏光显微镜方法研究了单体、配体和配合物的液晶行为,发现它们均具有热致液晶性。     

含冠醚环的席夫碱型液晶高分子的合成与表征

以 4 ,4′ (α ,ω 烷亚甲基二酰氧 )二苯甲醛和二氨基二苯并 14 冠 4为单体 ,采用溶液缩聚方法 ,首次合成了一类新的含冠醚环的席夫碱型液晶高分子 .一种单体采用脂族二酰氯和对羟基苯甲醛反应制备 ,另一种新的单体采用二硝基二苯并 14 冠 4 ,在钯 碳催化剂存在下 ,水合肼还原制备 .通过1H NMR、13 C NMR和分子力学计算方法研究了二氨基二苯并 14 冠 4的两种异构体的空间立体结构 ,发现能从1H NMR谱图上区分它们的立体结构 .它们的立体结构近似属于Cs 和C2 群 .聚合物的分子量不高 ,Mn 在 130 0 0～ 2 4 0 0 0之间 .单体的结构通过元素分析、IR、1H NMR和MS等方法确证 .聚合物的性质采用GPC、DSC、TG和POM等方法进行了研究 .发现所有的聚合物加热到各自的熔融温度 (Tm)以上都能形成液晶态 ,在液晶态可以观察到向列相的丝状织构和纹影织构 .聚合物的玻璃化转变温度 (Tg)、熔融温度和各向同性温度 (Ti)随聚合物分子中柔性间隔基的变化而变化 ,它们有较高的清亮点温度和宽的液晶态温度范围 .WAXD的研究进一步证实了聚合物的液晶性     

曝光量对含香豆素基团的液晶共聚高分子的光控取向性能的影响

本文设计合成了含有香豆素光敏基团的单体4-(6-丙烯酰氧基己氧基)苯甲酸-7-羟基香豆素酯(M1)和一种只含液晶基元的单体4-(丙烯酰氧基)己基苯甲酸-4-甲氧基苯酚酯(M2),并将这两种单体进行自由基聚合得到了共聚物.当该聚合物薄膜置于线性偏振紫外光(LPUV)下,会发生轴选择性的光化学反应,利用动态紫外光谱(UV光谱),对所合成的共聚物的光化学性能进行了研究.结果表明:当曝光能量为1740 mJ/cm²时,光反应达到饱和,紫外吸光度将不随曝光能量的变化而变化;随着曝光能量的增加,聚合物在反应初期光反应速率比较大,当曝光能量达到500 mJ/cm²左右,光反应度已经超过50%;当曝光量达到324 mJ/cm²,各向异性ΔA达到最大,ΔA_max=0.039.     

可光固化超支化聚硅氧基硅烷的合成与表征

自20世纪80年代末期Kim和Webster首次采用AB2型单体合成超支化聚合物以来，超支化聚合物以其新颖的结构、独特的性能和广泛的应用前景受到了科学界和工业界的广泛关注．其中超支化有机硅聚合物，尤其是硅氧基聚合物，由于具有良好的高低温稳定性、耐腐蚀性、耐候性等，以及硅氯、硅氢等末端基团易于功能化改性的特点，使其在功能性涂层材料、催化剂以及液晶材料等领域具有重要的应用价值．到目前为止，有关超支化聚硅氧基硅烷的研究主要集中在AB2型单体（x≥2，A和B分别为硅氢基团和乙烯基、烯丙基等不饱和基团）的制备以及硅氢加成产物的功能化改性方面．     

含偶氮苯基侧基聚硅氧烷的合成及光致变色性

含偶氮苯基侧基聚硅氧烷的合成及光致变色性张其震，张静智，王艳（山东大学化学系济南２５０１００）（山东大学环境科学中心济南２５０１００）关键词聚硅氧烷，光致变色，光异构化，量子产率将光致变色性和液晶性化合物结合可得到新的多功能高分子材料，Ｒｉｎｇｅｄｏ...     

Kinetic studies of photopolymerization using real time FT-IR spectroscopy

The real time FT-IR (RT/FT-IR) technique has been recognized as a very vital tool to quantitatively study the curing parameters such as the effects of initiator (or catalyst) type and concentration, accelerator, stabilizer, irradiation wavelength, temperature, and curing environments. Herein, our results in studies of photoinduced polymerizations for adhesive and coating applications are reported. The photoinduced polymerizations studied included anionic and hydrosilation (a polyaddition polymerization) reactions. In photoinduced anionic polymerization our studies for ethyl cyanoacrylate polymerization are described. The effect of the concentration of photoinitiator and inhibitor on the ethyl cyanoacrylate polymerization kinetic rate will be discussed. In photoinduced catalytic hydrosilation reaction studies, the effects of the catalyst concentration and staging irradiation are disclosed. The hydrosilation reaction was monitored using a Si? H silicone hydride stretching band located at 2169 cm^?1. The cyanoacrylate polymerization was monitored using the C?C stretching band occurring at 1617 cm^?1. The hydrosilation conversion was completed with an appropriate formulation. For monofunctional cyanoacrylate monomer, the photoinduced conversion to straight chain polymer was approximately 85% for a 60 s period. The intrinsic rates of the reactions were calculated for kinetic comparisons. For very fast cyanoacrylate polymerization studies, new FT-IR kinetic software was used to collect 204 spectra/min. Some detailed experimental techniques and polymerization reaction mechanisms are also discussed. © 1993 John Wiley & Sons, Inc.     

RAFT聚合合成一种即含甲酰基又含手性β-蒎烯单元聚合物

设计并合成了一种新型含甲酰基同时又含β-蒎烯单元的新单体2-β-蒎氧基-5-乙烯基苯甲醛(POVB),选择苯基双硫代乙酸1-苯基乙酯(PEPDA)为RAFT试剂、以AIBN为引发剂、在60℃下THF中实现了POVB的"活性"/可控RAFT自由基聚合.单体浓度半对数ln([M]0/[M])与聚合时间符合线性关系,聚合过程呈现一级动力学特征;聚合物分子量(Mn)随单体转化率几乎线性增加,而且整个反应过程中分子量分布(Mw/Mn1.2)保持在较窄的范围.1H-NMR的分析进一步证实了聚合物链的末端精细结构.此外,CD谱结果表明手性单元β-蒎烯基能赋予聚合物以光学活性.     

General Functionalization Method for Synthesis of α-Functionalized Polymers by Combination of Anionic Polymerization and Hydrosilation Chemistry

A new general functionalization method (GFM) of synthesizing α-functionalized polymers has been developed. α-Vinyl-functionalized polystyrene was obtained by anionic polymerization of styrene using 4-pentenyllithium as an initiator. Chloromethyldimethylsilane-functionalized polystyrene was successfully synthesized from vinyl-functionalized polystyrene by hydrosilation using Karstedt's catalyst. Nucleophilic substitution of this polymer was carried out in presence of pyrrolidine to obtain α-pyrrolidine-functionalized polystyrene. α-Triethoxysilylpolystyrene was obtained by hydrosilation of a-4-pentenylpolystyrene with triethoxysilane using Karstedt's catalyst.     

NMR study on microstructure of polymer produced by hydrosilation of styrene with poly(hydrogenmethylsiloxane)

The microstructure of the polymer formed by the hydrosilation of styrene with poly(hydrogenmethylsiloxane) was studied by ¹H- and ¹³C-NMR spectra. Two modes of addition in hydrosilation were found to occur randomly without the influence of the adjacent monomer unit by statistical analysis of sequence distribution of ²⁹Si-NMR spectrum.     

Synthesis of a hyperbranched polythioketal with 100% degree of branching

A 100% hyperbranched polymer was successfully prepared by using 2‐[4‐(4‐mercaptobutoxy)phenoxy]‐9H‐fluoren‐9‐one as an AB₂ monomer in trifluoroacetic acid. The kinetics of the model reaction between 9‐fluorenone and 3‐mercaptopropionic acid was investigated. The reaction obeyed the second‐order kinetics, indicating that the first reaction, that is, the formation of the intermediate from 9‐fluorenone and 3‐mercaptopropionic acid, is considerably slower than the second one, that is, the reaction of the intermediate with 3‐mercaptopropionic acid. On the basis of this finding, a new monomer expected to produce a 100% branched hyperbranched polymer, 2‐[4‐(4‐mercaptobutoxy)phenoxy]‐9H‐fluoren‐9‐one, was designed and prepared. The obtained polymer was characterized by ¹H and ¹³C‐NMR spectroscopy, which confirmed that the polymer was a 100% branched hyperbranched polymer. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2689–2700, 2008     

聚硅氧烷侧链液晶高分子的合成与表征

研究以对－烯丙氧基苯甲酸对－氰基苯酚酯为单体的聚硅氧烷侧链液晶高分子的合成方法。首先利用Williamson反应生成醚、羧酸酰化、酯化反应得到单体,然后利用硅氢化反应将单体接枝到聚甲基氢硅氧烷上得到目标产物。用IR,NMR及热台偏光显微镜等方法对单体和聚合物进行了结构表征和液晶行为分析。优化了对－烯丙氧基苯甲酸对－氰基苯酯为单体的聚硅氧烷侧链液晶高分子的合成工艺条件,提高了产率。样品表征结果证明单体和聚合物均呈现近晶液晶相,为特殊功能材料提供了原料。     

Synthesis and hydrosilation of multi-vinyl branched siloxane for self-healing system

In this work, the preparation of α,ω-dichloride-terminated multi-vinyl branched siloxane 1 （yield： 57.1%） used for self-healing polymer composites were synthesized via ring-opening of 1,3,5,7-tetravinyl-1,3,5,7-tetramethyl-cyclotetrasiloxane （D4^vi） in the presence of vinylmethydichlorosilane （VM-32）. 1 was hydrogenated by aluminum lithium hydride （LiAlH4） to get self-healing monomer 2 （yield： 79.8%） which contained both Si-H bonds and Si-vinyl bonds. Then hydrosilation occurred between these two bands and finally silicone 3 was obtained, showing the potential of self-healing.     

Synthesis and properties of vinyl‐terminated and silicon‐containing polysulfones and polyketones

4‐Fluorophenylsulfonylphenyl‐terminated polysulfone and 4‐fluorobenzoylphenyl ketone were prepared with bisphenol A and an excess of bis‐(4‐fluorophenyl)sulfone or 4,4′‐difluorobenzophenone, respectively, at 160 °C using potassium carbonate in N,N‐dimethylacetamide. The resulting polymers were reacted with 4‐hydroxystyrene to synthesize vinyl‐terminated polysulfones and ketones. The silicon‐containing polysulfones and ketones were prepared from the vinyl‐terminated polymer precursor and various H‐functional silanes or siloxanes. The synthesis of silicon‐containing polymers was achieved by hydrosilation with a rhodium catalyst. It was shown that the hydrosilation reaction proceeds with 55:45 chemoselectivity. The resulting polymers were investigated by ¹H NMR spectroscopy, DSC, and thermogravimetric analysis. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2937–2942, 2001     

主链型聚氨酯光动力高分子的合成与表征

合成了一种主链含推拉电子型偶氮苯基团的聚氨酯光动力高分子 .对聚合物的结构、热性能及光学性能进行了表征 .此聚合物为主链含假芪型偶氮生色团的无定形高分子 .用 4 88nmAr+ 激光对聚合物薄膜进行光加工 ,得到了规则的正弦表面起伏光栅 ,其起伏深度大于 2 0 0nm .光栅的一级衍射效率可达 2 4 % .