太赫兹近场光学亚表面检测技术研究

研究了太赫兹散射式扫描近场光学显微镜（Terahertz scattering-type scanning near-field optical microscopy,THz s-SNOM）对亚表面金属微纳结构的显微成像检测。首次采用自主搭建的THz s-SNOM系统对表面覆盖了六方氮化硼薄膜的金微米线进行太赫兹近场显微测量,获得了具有纳米量级空间分辨率和较高对比度的近场显微图。结合全波数值模拟,分析了THz s-SNOM探测亚表面金属微纳结构的空间分辨率、近场散射信号强度和成像对比度。研究表明,THz s-SNOM具有优良的亚表面显微成像检测能力,可应用于微纳电子器件的亚表面结构表征和缺陷检测。     

单层MoS2和WS2的太赫兹近场显微成像研究

采用太赫兹散射式扫描近场光学显微镜(THz s-SNOM)研究了化学气相沉积法制备的单层MoS₂和WS₂晶粒的太赫兹近场响应。在没有可见光激发时,未探测到可分辨的太赫兹近场响应,说明晶粒具有较低的掺杂载流子浓度。有可见光激发时,由于光生载流子的太赫兹近场响应,能够测得与晶粒轮廓完全吻合的太赫兹近场显微图。在相同的光激发条件下,MoS₂的太赫兹近场响应强于WS₂,反映了两者之间载流子浓度或迁移率的差异。研究结果表明,THz s-SNOM兼具超高的空间分辨率和对光生载流子的灵敏探测能力,对二维半导体材料和器件光电特性的微观机理研究具有独特的优势。     

散射式太赫兹扫描近场光学显微技术研究

基于散射式近场探测原理,设计并搭建了散射式太赫兹扫描近场光学显微系统(THz s-SNOM),实现了纳米量级空间分辨率的太赫兹近场显微成像测量。该系统以输出频率范围为0.1~0.3THz的太赫兹倍频模块为发射源,通过纳米探针的针尖产生纳米光源与样品相互作用,并将样品表面的倏逝波转化为可在远场测量的辐射波。通过探针逐点扫描样品表面,同时获得了样品表面的形貌图和太赫兹近场显微图。该系统的显微分辨率取决于探针针尖的曲率半径,而与太赫兹波的波长无关。使用该系统测量了金薄膜/硅衬底样品和石墨烯样品的近场显微图,结果表明,近场显微的空间分辨率优于60nm,波长与空间分辨率之比高达λ/26000。     

太赫兹光致力近场显微成像技术及应用研究

设计并搭建了太赫兹光致力显微成像系统(THz PiFM),首次在太赫兹波段实现了近场光力纳米显微成像测量。该系统基于原子力显微镜,利用探针对所受力的灵敏检测能力,通过探测探针与样品之间近场偶极相互作用产生的光场梯度力,实现无探测器的太赫兹近场显微成像。利用该系统,对可见光激发下的单层MoS₂晶粒进行了近场纳米显微成像表征,并分析了晶粒边缘近场光力信号增强的机制。研究结果表明,THz PiFM对二维材料中的载流子具有高灵敏的探测能力。与传统的太赫兹近场显微成像技术相比,THz PiFM无需太赫兹探测器,而且可获得更加优越的空间分辨率和成像信噪比,是一种低成本、高性能的新型太赫兹近场显微成像技术。     

磁控溅射制备碳化硼薄膜的结构与成分分析

近年来国际上³He资源的短缺造成了基于³He的中子探测器高昂的成本,而以碳化硼薄膜作为中子转换层的硼基中子探测器逐渐成为了最有前景的替代方案。通过直流磁控溅射制备了Ti/B₄C多层膜,并使用透射电子显微镜（TEM）、飞行时间二次离子质谱（ToF-SIMS）、X射线光电子能谱（XPS）等手段对薄膜的结构与成分进行表征。结果表明：Ti层存在结晶情况;H、O、N元素为薄膜内部的主要杂质,且多分布于Ti层与B₄C-on-Ti过渡层中;更高的本底真空度能够降低碳化硼薄膜内的杂质含量,提高B含量占比;中子探测效率测试结果证明本底真空度的提高能够有效提高碳化硼中子转换层的效率。     

基于大晶粒MA0.7FA0.3PbI3的薄膜光探测器

为了研究大晶粒高质量钙钛矿薄膜对光探测器的影响,制备了晶粒尺寸超过2 μm的MA_0.7FA_0.3PbI₃薄膜,并基于该薄膜制备了光电导型的光探测器（MCP-PD）。基于该薄膜的光探测器在532 nm和3 V偏置电压下获得了高响应度（0.905 A/W）和探测度（3.18×10¹² Jones）。在相似性能条件下,基于大晶粒尺寸薄膜制备的MCP-PD还表现出较快的响应速度。实验结果表明,大晶粒尺寸的薄膜降低了晶界对载流子传输的阻碍,提升了光探测器的响应度、探测度及响应速度。     

一种新的高分子聚合物光限幅特性的实验研究

报道了一种具有σ-π电子共轭轨道的硅聚合物的光限幅特性.在532nm波长,测量了不同浓度下样品的透射率与光强的关系.实验结果指出该聚合物具有较好的光限幅特性.利用Z扫描方法测定了该样品的有效双光子吸收系数β=3.5×10^-9cm/W.     

像差在临界角方法探焦技术中的影响

分析了在临界角方法探焦技术中像差对测量灵敏度的影响。并给出了对两个显微物镜测量的结果。焦点探测试验精度为±1×10^-2μm.     

硅微陀螺仪正交耦合系数的计算及验证

硅微陀螺仪多采用微机械加工工艺制作,其加工的相对精度较低,从而易产生正交耦合误差,影响陀螺仪的输出。为了优化设计硅微陀螺仪结构,提高其性能,本文建立了陀螺仪正交耦合系数的理论分析模型。首先,利用能量方法推导陀螺仪驱动梁的面内刚度;然后,建立陀螺仪的刚度矩阵;最后,推导了正交耦合系数的理论计算公式。针对本课题组研制的双质量振动式硅微陀螺仪,理论计算出其直接耦合系数为4.74×10^-5,二次耦合系数为8.44×10^-7。得到的陀螺仪的正交耦合系数为4.75×10^-5,与仿真值相差8.7%。分析得到陀螺仪正交耦合系数的最大值为2.18×10^-4,与仿真值相差7.9%。最后,实验验证了计算结果的正确性。得到的结果表明,建立的正交耦合系数理论分析模型可为硅微陀螺仪的结构优化设计提供理论依据和实际指导。     

Fizeau激光波长计测量脉冲激光波长

详细讨论了采用单片机控制的Fizeau波长计测量脉冲激光波长的两种方法,包括脉冲激光同步测量方法与软件判别捕捉方法,文章最后给出了系统的测量结果,其测量精度与测量连续激光相同,即绝对精度<10^-6,分辨率<10^-7.     

Minimal Realization of Linear Graph Models for Multi-physics Systems

An engineering system may consist of several different types of components,belonging to such physical"domains"as mechanical,electrical,fluid,and thermal.It is t...     

Non-monotonic material contrast in scanning ion and scanning electron images

30 keV Ga⁺ focused ion beam induced secondary electron (iSE) imaging was used to determine the relative contrast between several materials. The iSE signal compared from C, Si, Al, Ti, Cr, Ni, Cu, Mo, Ag, and W metal layers does not decrease with an increase in target atomic number Z₂, and shows a non-monotonic relationship between contrast and Z₂. The non-monotonic relationship is attributed to periodic fluctuations of the stopping power and sputter yield inherent to the ion–solid interactions. In addition, material contrast from electron-induced secondary electron (eSE) and backscattered electron (BSE) images using scanning electron microscopy (SEM) also shows non-monotonic contrast as a function of Z₂, following the periodic behavior of the stopping power for electron–solid interactions. A comparison of the iSE and eSE results shows similar relative contrast between the metal layers, and not complementary contrast as conventionally understood. These similarities in the contrast behavior can be attributed to similarities in the periodic and non-monotonic function defined by incident particle–solid interaction theory.     

Application of Feature Extraction through Convolution Neural Networks and SVM Classifier for Robust Grading of Apples

This paper proposes a novel grading method of apples,in an automated grading device that uses convolutional neural networks to extract the size,color,texture,an...     

分布动态载荷识别的抗噪处理

针对正交多项式频域法在用多种响应对矩形薄板进行载荷识别中抗噪性较差的问题,综合运用平均法、矩阵预处理和奇异值截断法等方法对之进行改善,并引入空间映射的思想,将该方法的应用范围拓展为复杂的模型.利用仿真算例,证实了该方法具有较好的抗噪性.     

基于MELTAC-N平台的核电厂安全级DCS环网研究与测试

针对工程实践中环网通讯相关问题的处理缺乏理论基础及国产化安全级DCS平台的开发缺乏成熟经验借鉴问题,对基于MELTAC-N平台核电厂安全级DCS环网的软硬件实现进行了研究。提出了安全级DCS环网双环网冗余设计、光切换开关设计等硬件设计方法,以及以RPR协议为基础,采用全数据收发策略的软件设计方法。在CPR1000安全级DCS平台上对安全级DCS环网的可靠性及实时性进行了评价,并进行了容错能力、响应时间及响应时间稳定性测试验证实验。结果表明,基于MELTAC-N平台安全级DCS环网软硬件设计具有较好的容错能力及响应时间稳定性。     

The laboratory simulation of abrasive wear

Abrasive wear has long been recognised as one of the most potentially serious tribological problems facing the operators of many types of plant and machinery; several industrial surveys have indicated that wear by abrasion can be responsible for more than 50% of unscheduled machine and plant stoppages. Locating the operating point of a tribological contact in an appropriate operational ‚map’︁ can provide a useful guide to the likely nature and origins of the surface degradation experienced in use, though care must be exercised in choosing the most suitable parameters for the axes of the plot. Laboratory testing of materials and simulations of machine contacts are carried out for a number of purposes; at one level for the very practical aims of ranking candidate materials or surface hardening treatments in order of their wear resistance, or in an attempt to predict wear lives under field conditions. More fundamentally, tests may be aimed at elucidating the essential physical mechanisms of surface damage and loss, with the longer term aim of building an analytical and predictive model of the wear process itself. In many cases, component surface damage is brought about by the ingress of hard, particulate matter into machine bearing or sealing clearances. These may be running dry although, more usually, a lubricant or service fluid is present at the interface. A number of standardised wear test geometries and procedures have been established for both two- and three-body wear situations, and these are briefly described. Although abrasive wear is often modelled as following an ‚Archard’︁ equation (i.e. a linear increase in material loss with both load and time, and an inverse dependence on specimen hardness) both industrial experience and laboratory tests of particularly lubricated contacts show that this is not always the case: increasing the hardness differential in an abrasively contaminated lubricated pair may not always reduce the rate of damage to the harder surface.     

Limits of topographic measurement by the scanning tunnelling and atomic force microscopes

Parameters describing the topographic character of a surface (height, surface wavelength, slope and curvature) can be derived from equivalent sinusoidal profiles. The response of a surface-measuring instrument may be modelled in terms of instrument parameters such as stylus radius, and scanning range and resolution. The performance of the instrument may then be mapped as a zone in amplitude-wavelength (AW) space to show the sinusoidal profiles it is capable of measuring. In a first-order analysis the STM and AFM are considered as equivalent to contact-stylus instruments with a notional stylus radius equal to the tip radius plus the gap. Comparisons between different instruments and types of instrument are readily made by mapping in AW space. The error arising from convolution of the sinusoidal profile with that of the finite tip may be quantified and plotted as contours in AW space.     

Fractional order nonsingular terminal sliding mode control for flexible spacecraft attitude tracking

This paper investigates a fractional terminal sliding mode control for flexible spacecraft attitude tracking in the presence of inertia uncertainties and extern...     

奥氏体不锈钢表面双辉等离子渗锆的动力学

利用双辉等离子渗金属技术在0Cr18Ni9Ti奥氏体不锈钢表面制备了一层均匀、致密、呈良好冶金结合的渗锆合金层,并对1 060℃下的渗锆动力学进行了研究。结果表明:随着距锆合金层表面距离的增加,锆元素的含量呈梯度递减,扩散系数逐渐减小,而扩散激活能逐步增大;在1 060℃采用双辉等离子技术渗锆时,渗锆合金层表层的空位密度为2.945×(1012~1013)cm-2,与相同温度下采用常规渗金属工艺相比,提高了1~2个数量级。     

气化炉三维扫描测量与数据处理

以德士古气化炉耐火砖的内壁蚀损检测设备为基础,对采集到的点云数据做了进一步处理.通过对数据的筛选和剔除,实现了数据点的平滑降噪细化和精简.然后利用点云对整、网格划分和分色显示等方法,最终完成了内壁腐蚀情况的三维建模.重点讨论了点云数据的预处理及后处理的方法,并根据内壁耐火砖的腐蚀阈值,提出了一种气化炉内壁腐蚀区域的识别与分割方法.对耐火砖的腐蚀分析、气化炉的生产与维修提供了可靠依据,并在工程应用中获得了一致认可.