离子交换法制备廉价而高效的可见光驱动CaMg(CO_3)_2@Ag_2CO_3微球光催化剂（英文）

Ag_2CO_3是一种典型的银基半导体,可在可见光照射下降解各种有机染料,但制备成本高,光腐蚀严重,稳定性差,难以循环利用等,因而限制了它的实际应用.针对这些问题,目前多数的改进措施是构建异质结,有效的分离光生电子与空穴来提高Ag_2CO_3的光催化性能.比如典型的异质结光催化剂有TiO_2/Ag_2CO_3,Ag_2CO_3/Zn O,Ag_2O/Ag_2CO_3和Ag X/Ag_2CO_3等.也有在表面化学沉积,光化学还原Ag等贵金属形成等离子体等方式提高其光催化性能,但是很少通过特殊形貌控制以提高Ag_2CO_3的光催化性能.最近的研究表明,由于多尺度微球结构催化剂具有高效的光捕能力,同时具有比表面积大、易沉降,良好的物质传输能力和表面的渗透性,因而在液相光催化反应中具有明显的优势.因此,我们期望制备出一个多尺度微球结构Ag_2CO_3光催化剂.CaMg(CO_3)_2是一种具有微球结构的半导体,它与Ag_2CO_3有相同的阴离子结构,但是两者在水溶液中的溶解度相差较大,利用这个特性理论上可以将两个不同的半导体结合在一起,得到一种新型的复合微球.本文以CaMg(CO_3)_2微球为硬模板,通过简单的离子交换成功制备了粒径约为10mm的CaMg(CO_3)_2@Ag_2CO_3微球.利用X射线衍射、N_2物理吸附、扫描电镜、傅里叶变换红外光谱和紫外-可见漫反射吸收光谱、光电流等手段对在不同反应时间与温度下制得的CaMg(CO_3)_2与Ag_2CO_3的复合物进行了表征.结果表明,在40°C下Ag~+与Ca~(2+)、Mg~(2+)离子交换4 h后,得到了一种多尺度CaMg(CO_3)_2@Ag_2CO_3复合微球.此时,微球中Ag_2CO_3的含量约为2.56%.结果表明,这种具有多尺度结构的复合微球能够增强可见光的吸收.电化学阻抗测试和光电流测试表明,CaMg(CO_3)_2核的存在可以降低光生载流子的迁移阻力,进而促进光生电子与空穴的分离.在光降解酸性橙II的测试中,核壳结构的CaMg(CO_3)_2@Ag_2CO_3复合微球表现出了更高的催化活性,而且具有更好的循环使用性能.同时,相对于纯Ag_2CO_3光催化剂来说,CaMg(CO_3)_2@Ag_2CO_3复合微球制备的成本大幅度降低.ESR测试证明了?OH为CaMg(CO_3)_2@Ag_2CO_3复合微球光催化过程中的主要活性物质.     

(Phen)2.5HPW/WO3复合空心微球的制备及光催化性能

通过磷钨酸H3PW12O40(HPW)和邻菲啰啉C12H8N2(Phen)的溶液反应,合成了杂多化合物(C12H8N2)2.5H3PW12O40((Phen)2.5HPW),以WO3空心微球为载体,负载杂多化合物(Phen)2.5HPW,制备了(Phen)2.5HPW/WO3复合空心微球.用等离子体原子发射光谱(ICP...     

乳液聚合法制备P(St/BA)-KAl(OH)2CO3纳米复合物

利用乳液聚合法制备了一种含KAl(OH)2CO3纳米粒子的聚苯乙烯／丙烯酸丁酯复合物．Zeta电位、粒径分布、扫描电镜(SEM)和透射电镜(TEM)等分析表明KAl(OH)2CO3粒子能够稳定地分散于苯丙乳液的乳胶粒中,形成核一壳结构．热失重(TG)分析表明KAl(OH)2CO3粒子的加入能提高复合物的热稳定性,使其在阻燃涂料领域有着潜在的应用前景．     

(Phen)2.5HPW/WO3复合空心微球的制备及光催化性能

通过磷钨酸H3PW12O40(HPW)和邻菲啰啉C12H8N2(Phen)的溶液反应,合成了杂多化合物(C12H8N2)2.5H3PW12O40((Phen)2.5HPW),以WO3空心微球为载体,负载杂多化合物(Phen)2.5HPW,制备了(Phen)2.5HPW/WO3复合空心微球.用等离子体原子发射光谱(ICP-AES)、元素分析(EA)、热重-差热分析(TG-DTA)、傅里叶变换红外光谱(FTIR)、扫描电子显微镜(SEM)、紫外-可见漫反射吸收光谱(UV-vis DRS)对样品进行了表征.在高压汞灯照射下,研究了杂多化合物(Phen)2.5HPW、WO3空心微球和(Phen)2.5HPW/WO3复合空心微球对甲基橙水溶液的光催化降解活性,结果表明,(Phen)2.5HPW/WO3复合空心微球的光催化活性高于单独的杂多化合物(Phen)2.5HPW和WO3空心微球,催化剂易于回收,光催化性能稳定.     

LiTi2(PO4)3的Na/Li离子交换特征

锂离子传导材料LiTi₂(PO₄)₃能在LiCl水溶液中高选择性地与Na⁺进行离子交换. 研究了NaCl 溶液中LiTi₂(PO₄)₃上的Na/Li离子交换反应, 实验结果表明, 升高温度能显著提高LiTi₂(PO₄)₃上的Na/Li交换反应速率, 其离子交换动力学规律可近似由JMAK(Johnson-Mehl-Aurami-Kalmogorav)方程描述. 对LiTi₂(PO₄)₃在水和NaCl溶液中的溶解行为的研究结果表明, 升高温度能加快其在水中的溶解速率, pH值过大或过小及离子交换都会加剧LiTi₂(PO₄)₃的溶解.     

可见光响应的CO3(PO4)2/Ag3PO4纳米复合光催化剂的制备及表征

采用简单的化学偏聚法合成出Ag3PO4纳米颗粒、磷酸钴(Co3(PO4)2,CoP)纳米片以及它们两者的纳米复合结构(CoP/Ag3PO4),同时还比较了它们的可见光催化活性.采用场发射扫描电镜(FESEM)、X射线衍射(XRD)、紫外-可见(UV-Vis)吸收光谱以及光致发光谱等手段对其形貌、结构、光学以及可见光催化性能等进行表征.结果表明,CoP/Ag3PO4复合纳米结构的可见光降解甲基橙(MO)的速率和循环稳定性均明显优于其它两种物质.这表明CoP应该起着共催化剂的作用,它能够抑制光生电子与空穴之间的复合,并且提供大量高活性的光生空穴.此外,我们还发现CoP/Ag3PO4降解另一种阳离子型染料——罗丹明B(RhB)的能力则远不如纯Ag3PO4,这可能是与光催化剂的表面性质发生改变有关,造成更低的RhB吸附能力.本文提供了一种廉价制备高效可见光催化剂的新方法.     

SnO2、Ag/SnO2微球的制备及其光催化性能研究

在SnCl_2-H_2C_2O_4-PVP(聚乙烯吡络烷酮)-H_2O的水热体系中,180℃下反应10 h制备了粒径约为900 nm的四方结构的SnO_2微球。以SnO_2微球为基底,通过光还原法,制备了Ag/SnO_2复合微球。用X射线衍射(XRD),扫描电子显微镜(SEM)对产物进行结构表征,并提出了可能的化学反应。以酸性大红为例,研究了SnO_2微球和Ag/SnO_2复合物的光催化性能,结果表明,SnO_2微球和Ag/SnO_2复合物对酸性大红的降解均有一定的光催化效果,而且,Ag的复合可以有效提高SnO_2微球的光催化活性。     

碳微球模板制备LaMnO3及其电化学性能研究

以葡萄糖为碳源采用水热法制备出碳微球,再将其作为模板剂,柠檬酸作为络合剂,去离子水和乙醇作为溶剂,经混合搅拌、沉淀和去除模板剂等步骤,由La(NO₃)₃·6H₂O和Mn(NO₃)₂制备LaMnO₃。采用粉末X射线衍射、场发射扫描电镜、N₂吸附-脱附等对LaMnO₃进行表征分析,并对其电化学性能进行了测试。结果表明,碳微球模板可制备出层状多孔结构的LaMnO₃,其具有良好的氧还原反应(ORR)和析氧反应(OER)催化活性,比表面积为26m²/g,将其制备成铝-空气电池空气电极催化剂,在电流密度20mA·cm^-2时放电电压可达1.476V,高于共沉淀法制备的LaMnO₃的放电电压。     

一种具有Z-Scheme机制的高效可见光驱动的介孔AgI@Fe-MIL-88B-NH2光催化剂

以磺化聚苯乙烯微球为模板制备了具有开口结构的介孔Fe-MIL-88B-NH₂球壳,据此进一步通过原位反应法合成一种新型具有可见光活性的AgI改性Fe-MIL-88B-NH₂微球。与纯的AgI和Fe-MIL-88B-NH₂相比,制备的AgI@Fe-MIL-88B-NH₂复合材料的光催化活性显著提高,这是由于吸附能力和电荷分离均得到增强的缘故。电荷分离机制可归因于形成了不含氧化还原调节剂的直接Z-Scheme系统,该系统使光生电子从Fe-MIL-88B-NH₂的导带迁移至AgI的价带上,从而产生活性更强的·O₂^-和·OH。     

共沉淀法制备Ag/AgCl-TiO2空心复合纳米微球及其光催化性能

通过甲基丙烯酸与苯乙烯聚合制备了表面负电性的聚苯乙烯(PSt)纳米乳胶粒. 在乙醇与水的混合溶剂中, 用硅烷偶联剂乙烯基三甲氧基硅烷对其进行表面改性后加入钛酸四丁酯、 氯化钠和硝酸银, 以PSt乳胶粒为模板采用共沉淀法制备了PSt-AgCl-TiO₂复合微球. 在180 ℃对其进行液相预处理及煅烧去除PSt模板后制备了Ag/AgCl-TiO₂空心复合粒子. 对各阶段产物的形貌、 晶体结构和比表面积等进行了表征. 结果表明, 所得产物为Ag/AgCl与锐钛矿型TiO₂复合的空心粒子, 其比表面远大于商品TiO₂(P25). 考察了Ag/AgCl-TiO₂复合粒子在紫外光与可见光下对罗丹明B(RhB)降解的催化活性. 结果表明, 在紫外光下n(Ag)/n(Ti)=0.1%的Ag/AgCl-TiO₂复合粒子活性最高, 30 min时对RhB的降解率比不含Ag/AgCl的TiO₂空心微球提高了13%; 虽然Ag/AgCl-TiO₂在可见光下的催化活性远比紫外光下低, 但与纯TiO₂空心纳米微球相比其催化活性仍明显增强. n(Ag)/n(Ti)=2.0%的Ag/AgCl-TiO₂复合粒子催化活性最高, 120 min时对RhB的降解率比不含Ag/AgCl的TiO₂空心微球提高了38%.     

离子交换法制备高光催化活性Bi2WO6@Bi2S3异质结纳米片

社会经济快速发展的同时, 也带来了日益严峻的环境污染问题. 半导体光催化氧化技术因节能环保而在环境领域有广阔的应用前景. 作为最具有代表性的半导体光催化材料, TiO2因为其禁带宽度(3.2 eV)比较大, 只能被紫外光激发, 因而对太阳能的利用率较低. 作为一种最简单的含铋层状氧化物, Bi2WO6的禁带宽度(2.7 eV)相对较小, 可以部分利用太阳光中的可见光, 因而受到广大研究者的青睐. 但是, Bi2WO6光催化材料的可见光响应范围较窄, 仅能被波长小于450 nm的光激发, 且激发后的光生载流子容易复合, 导致光催化效率不高. 因此, 迫切需要对Bi2WO6光催化材料进行结构修饰与改性,采用拓展其光响应范围和抑制载流子复合, 来提高其光催化活性.本文采用离子交换法原位合成了具有核-壳结构的Bi2S3@Bi2WO6纳米片, 充分利用Bi2S3优良的可见光响应性能和半导体异质结光催化剂的构建, 来提高Bi2WO6的光催化活性. 结果表明, 随着Na2S·9H2O用量从0增加到1.5 g, 所得催化剂的光活性不断提高, X3B的降解速率常数由0.40×10-3min-1增加到6.6×10-3min-1, 催化剂活性提高了16.5倍. 当进一步增加Na2S·9H2O的用量时(1.5-3.0 g), 复合催化剂的光活性下降. 这是由于过多Na2S·9H2O的引入导致在催化剂表面生成了没有光活性的NaBiS2层(Bi2S3+ Na2S = 2NaBiS2), 占据了催化剂的活性位点, 阻碍了染料分子与催化剂的直接接触. Bi2WO6@Bi2S3异质结纳米片光活性的提高, 可归因于Bi2S3的敏化作用极大拓展了复合催化剂的光响应范围; 另一方面, Bi2WO6和Bi2S3两者之间的半导体异质结效应有效促进了光生载流子在空间的有效分离, 抑制了光生电子-空穴的复合, 从而提高了复合催化剂的催化效率. 本研究为其他半导体复合材料的原位生长制备提供了新的思路.     

3D flower-like heterostructured TiO2@Ni(OH)2 microspheres for solar photocatalytic hydrogen production

TiO₂@Ni(OH)₂ core-shell microspheres were synthesized by a facile strategy to obtain a perfect 3D flower-like nanostructure with well-arranged Ni(OH)₂ nanoflakes on the surfaces of TiO₂ microspheres; this arrangement led to a six-fold enhancement in photocatalytic hydrogen evolution. The unique p-n type heterostructure not only promotes the separation and transfer of photogenerated charge carriers significantly, but also offers more active sites for photocatalytic hydrogen production. A photocatalytic mechanism is proposed based on the results of electrochemical measurements and X-ray photoelectron spectroscopy.     

Synthesis and Crystal Structure of （SiCl3）2Fe（CO）4

The compound （SiCl3）2Fe（CO）4 was synthesized and structurally characterized by X-ray single-crystal diffraction. It crystallizes in monoclinic, space group P2 1/n with α = 8.287（2）, b = 9.829（2）, c = 9.042（2） A, β = 96.19（3）°, V= 732.2（3） A^3, C4Cl6FeO4Si2, Mr = 436.77, Z = 2, Dc = 1.981 g/cm^3, F（000） = 424, μ（MoKα） = 2.282 mm^-1, the final R = 0.048 and wR = 0.164 for 1109 observed reflections （I 〉 2σ（I））. The crystal structure of （SiCl3）2Fe（CO）4 reveals that the Si（l）- Fe-Si（l）^a sequence is linear and perpendicular to the Fe（CO）4 cross-shaped plane.     

Kinetics of the Oxidative Dehydrogenation of Isobutance over Cr2o3／La2（CO3）3

The oxidative dehydrogenation (ODH) of isobutane over Cr2O3/La2(CO3)3 has been investi- gated in a low-pressure Knudsen cell reactor, under conditions where the kinetics of the primary reaction steps can be accurately determined. By heating the catalyst at a constant rate from 150-300oC, temper- ature uctuations due to non-equilibrium adsorption are minimized. The evolved gas profiles show that ODH to isobutene and water is a primary reaction pathway, while carbon dioxide, which forms from the catalyst during reaction, is the only other product. This CO2 evolution may enhance the activity of the catalyst. Isobutene formation proceeds with the participation of lattice oxygen from the Cr2O3/La2(CO3)3 catalyst. The small pre-exponential factor is expected for a concerted mechanism and for such a catalyst with a small surface area and limited porosity.     

Synthesis and ion exchange behaviour of polyaniline Sn(IV) arsenophosphate: a polymeric inorganic ion exchanger

Incorporation of a polymer material into an inorganic ion exchanger provides a class of hybrid ion exchangers with a good ion exchange capacity, high stability, reproducibility and selectivity for heavy metals. Such a type of ion exchanger ‘polyaniline Sn(IV) arsenophosphate’ has been synthesized by mixing polyaniline into inorganic material. This material is characterized using X-ray, IR, TGA studies in addition to ion exchange capacity, pH-titration, elution and distribution behaviour. On the basis of distribution studies, the material has been found to be highly selective for Pb(II). Kinetic study of exchange for the metal ions has been performed and some physical parameters such as self diffusion coefficient D₀, energy E_a and entropy ΔS* of activation have been determined.     

Kinetics of the Oxidative Dehydrogenation of Isobutane over Cr2O3/La2(CO3)3

The oxidative dehydrogenation (ODH) of isobutane over Cr2O3/La2(CO3)3 has been investi-gated in a low-pressure Knudsen cell reactor, under conditions where the kinetics of the primary reactionsteps can be accurately determined. By heating the catalyst at a constant rate from 150-300 ℃, temper-ature fluctuations due to non-equilibrium adsorption are minimized. The evolved gas profiles show thatODH to isobutene and water is a primary reaction pathway, while carbon dioxide, which forms from thecatalyst during reaction, is the only other product. This CO2 evolution may enhance the activity of thecatalyst. Isobutene formation proceeds with the participation of lattice oxygen from the Cr2O3/La2(CO3)3catalyst. The intrinsic Arrhenius rate constant for the ODH of isobutane isk(s-1) = 1011.5±2.2exp{-((55 ± 5) - △Hads kJmol-1)/RT}The small pre-exponential factor is expected for a concerted mechanism and for such a catalyst with asmall surface area and limited porosity.     

The Selective Reduction of 4-Propylthio-2-nitroaniline with CO Using Ru3（CO）12／PEDPA Complex as Catalyst

The Ru3(CO)12/PEDPA complex was firstly applied in the CO selective reduction of 4-propylthio-2-nitroaniline.The effects of reaction temperature,the pressure of CO and concentration of catalyst on the reduction were investigated.Under the optimum conditions of T=140℃, Pco=5.0MPa and substrate/catalyst=300(molar ratio),the conversion and selectivity were 70% and 98%,respectively.After simple phase separation,the catalyst could be recycled.     

DFT investigation of the mechanism of CH2CO + O(3P) reaction

A detailed theoretical survey of the potential energy surface (PES) for the CH₂CO + O(³P) reaction is carried out at the QCISD(T)/6‐311+G(3df,2p)//B3LYP/6‐311+G(d,p) level. The geometries, vibrational frequencies, and energies of all stationary points involved in the reaction are calculated at the B3LYP/6‐311+G(d,p) level. More accurate energy information is provided by single‐point calculations at the QCISD(T)/6‐311+G(3df,2p) level. Relationships of the reactants, transition states, intermediates, and products are confirmed by the intrinsic reaction coordinate (IRC) calculations. The results suggest that P1(CH₂+CO₂) is the most important product. This study presents highlights of the mechanism of the title reaction. © 2005 Wiley Periodicals, Inc. Int J Quantum Chem, 2005