Vibrational spectroscopic studies,conformations and ab initio calculations of 1,2‐bis(trifluorosilyl)ethane (SiF3CH2CH2SiF3)

Infrared spectra of 1,2‐bis(trifluorosilyl)ethane (SiF₃CH₂CH₂SiF₃) were obtained in the vapour and liquid phases, in argon matrices and in the solid phase. Raman spectra of the compound as a liquid were recorded at various temperatures between 293 and 270 K and spectra of an apparently crystalline solid were observed. The spectra revealed the existence of two conformers (anti and gauche) in the vapour, liquid and in the matrix. When the vapour was chock‐frozen on a cold finger at 78 K and annealed to 150 K, certain weak Raman bands vanished in the crystal. The vibrational spectra of the crystal demonstrated mutual exclusion between IR and Raman bands in accordance with C_2h symmetry. Intensity variations between 293 and 270 K of pairs of various Raman bands gave ΔH(gauche—anti) = 5.6 ± 0.5 kJ mol⁻¹ in the liquid, suggesting 85% anti and 15% gauche in equilibrium at room temperature. Annealing experiments indicate that the anti conformer also has a lower energy in the argon matrices, is the low‐energy conformer in the liquid and is also present in the crystal. The spectra of both conformers have been interpreted, and 34 anti and 17 gauche bands were tentatively identified. Ab initio and density functional theory (DFT) calculations were performed giving optimized geometries, infrared and Raman intensities and anharmonic vibrational frequencies for both conformers. The conformational energy difference derived in CBS‐QB3 and in G3 calculations was 5 kJ mol⁻¹. Copyright © 2009 John Wiley & Sons, Ltd.     

Infrared and Raman Spectra,conformations, ab initio calculations and spectral assignments of 1,3‐disilabutane (SiH3CH2SiH2CH3)

Raman spectra of 1,3‐disilabutane (SiH₃CH₂SiH₂CH₃) as a liquid were recorded at 293 K and as a solid at 78 K. In the Raman cryostat at 78 K an amorphous phase was first formed, giving a spectrum similar to that of the liquid. After annealing to 120 K, the sample crystallized and large changes occurred in the spectra since more than 20 bands present in the amorphous solid phase vanished. These spectral changes made it possible to assign Raman bands to the anti or gauche conformers with confidence. Additional Raman spectra were recorded of the liquid at 14 temperatures between 293 and 137 K. Some Raman bands changed their peak heights with temperature but were countered by changes in linewidths, and from three band pairs assigned to the anti and gauche conformers, the conformational enthalpy difference Δ_confH(gauche–anti) was found to be 0 ± 0.3 kJ mol⁻¹ in the liquid. Infrared spectra were obtained in the vapor and in the liquid phases at ambient temperature and in the solid phases at 78 K in the range 4000–400 cm⁻¹. The sample crystallized immediately when deposited on the CsI window at 78 K, and many bands present in the vapor and liquid disappeared. Additional infrared spectra in argon matrixes at 5 K were recorded before and after annealing to temperatures 20–34 K. Quantum chemical calculations were carried out at the HF, MP2 and B3LYP levels with a variety of basis sets. The HF and DFT calculations suggested the anti conformer as the more stable one by ca 1 kJ mol⁻¹, while the MP2 results favored gauche by up to 0.4 kJ mol⁻¹. The Complete Basis Set method CBS‐QB3 gave an energy difference of 0.1 kJ mol⁻¹, with anti as the more stable one. Scaled force fields from B3LYP/cc‐pVQZ calculations gave vibrational wavenumbers and band intensities for the two conformers. Copyright © 2007 John Wiley & Sons, Ltd.     

Structural and thermochemical studies on CH3SCH2CHO,CH3CH2SCHO,CH3SC(═O)CH3, and radicals corresponding to loss of H atom

CH₃SCH₂CHO, CH₃CH₂SCHO, and CH₃SC(═O)CH₃ are intermediates during the partial oxidation of CH₃SCH₂CH₃ in the atmosphere and in combustion processes. Thermochemical properties (ΔH_f^o, S^o and C_p(T)), structures, internal rotor potentials, and C─H bond dissociation energies of the parent molecules and their radicals formed after loss of a hydrogen atom are of value in understanding the oxidation processes of methyl ethyl sulfide. The lowest energy molecular structures were initially determined using the density functional B3LYP/6‐311G/(2d,d,p) level of theory. Standard enthalpies of formation (ΔH_f^o₂₉₈) for the radicals and their parent molecules were calculated using the density functional B3LYP/6‐31G(d,p), B3LYP/6‐31 + G(2d,p), and the composite CBS‐QB3 ab initio methods using isodesmic reactions. Internal rotation potential energy diagrams and internal rotation barriers were investigated using B3LYP/6‐31 + G(d,p) level calculations. The contributions for S^o₂₉₈ and C_p(T) were calculated using the rigid rotor harmonic oscillator approximation on the basis of the structures and vibrational frequencies obtained by the density functional calculations, with contributions from torsion frequencies replaced by internal rotor contributions from the method of Pitzer‐Gwinn. The recommended values for enthalpies of formation of the most stable conformers of CH₃SCH₂CHO, CH₃CH₂SCHO, and CH₃SC(═O)CH₃ are ?34.6 ± 0.8, ?42.4 ± 1.2, and ‐49.7 ± 0.8 kcal/mol, respectively. The structural and thermochemical data presented for CH₃SCH₂CHO, CH₃CH₂SCHO, and CH₃SC(═O)CH₃ and their radicals are of value in understanding the mechanism and kinetics of methyl ethyl sulfide oxidation under varied temperatures and pressures. Group additivity values are developed for estimating properties of structurally similar, larger sulfur‐containing compounds.     

Vibrational and reorientational dynamics,crystal structure and solid–solid phase transition studies in [Ca(H2O)6]Cl2 supported by theoretical (DFT) calculations

[Ca(H₂O)₆]Cl₂ between 93 and 300 K possesses two solid phases. One phase transition (PT) of the first‐order type at = 218.0 K (on heating) and = 208.0 K (on cooling) was determined by differential scanning calorimetry. Thermal hysteresis of this PT (10 K), as well as the heat flow anomaly sharpness, suggests that the detected PT is a first‐order one. The entropy change value [ΔS ≈ 8.5 J mol⁻¹ K⁻¹ ≈ Rln(2.8)] associated with the observed PT suggests a moderate degree of molecular dynamical disorder of the high‐temperature phase. The temperature dependencies of the full width at half maximum values of the infrared band are due to ρ(H₂O)A₂ mode (at 205 cm⁻¹), and two Raman bands are arising from τ(H₂O)E and τ(H₂O)A₁ modes (at ca. 410 and 682 cm⁻¹, respectively), suggesting that the observed PT is associated with a sudden change of speed of the H₂O reorientational motions. The estimated mean value of activation energy for the reorientation of the H₂O ligands in the high‐temperature phase is ca. 11.4 kJ mol⁻¹ from Raman spectroscopy and 11.9 kJ mol⁻¹ from infrared spectroscopy. X‐ray single‐crystal diffraction measurement and spectroscopic studies (infrared, Raman and inelastic neutron scattering) also confirm that [Ca(H₂O)₆]Cl₂ includes two sets of differently bonded H₂O molecules. Ab initio calculations of the complete unit cell of one molecule of calcium chloride with a different number of water molecules (2, 4 and 6) have also been carried out. A comparison of Fourier Transform Infrared (FT‐IR), Fourier Transform Raman Scattering (FT‐RS) and inelastic neutron scattering spectroscopies results with periodic density functional theory calculations was used to provide a complete assignment of the vibrational spectra of [Ca(H₂O)₆]Cl₂. Copyright © 2016 John Wiley & Sons, Ltd.     

外场下二甲基硅酮双自由基的从头计算研究

本文首先采用密度泛函(DFT)方法在6-311+g(2d,p)基组水平上计算研究了二甲基硅酮双自由基的红外振动光谱和核磁共振化学位移,而后在同样的基组水平上采用含时密度泛函(TDDFT)方法研究了外电场对二甲基硅酮双自由基的激发态、偶极矩和分子能量的影响,结果表明,不同方向的外加电场对他们的影响情况各不相同,沿X、Y方向的电场对激发态的激发能、振子强度影响在外加电场为0.005～0.010 a.u.是转折点,沿Z方向的电场在电场强度为0.015 a.u.是转折点.沿Y方向的外电场对分子的偶极矩、分子能量影响最大,沿X方向的外电场次之,沿Z方向的外电场对偶极矩和分子能量影响最小.     

1,1,1‐Trichloro‐3‐(1‐phenethylamino‐ethylidene)‐ pentane‐2,4‐dione—synthesis,spectroscopic, theoretical and structural elucidation

1,1,1‐Trichloro‐3‐(1‐phenethylamino‐ethylidene)‐pentane‐2,4‐dione is spectroscopically and structurally elucidated by means of linear‐polarized IR spectroscopy (IR‐LD) of oriented solids as a colloidal suspension in nematic liquid crystal. Structural information and IR‐spectroscopic assignment are supported by quantum chemical calculations at MP2 and B3LYP level of theory and 6‐311++G** basis set. The geometry is characterized with an inramolecular hydrogen bond of NH^…O?C with length of 2.526 Å and a NHO angle of 140.5(1)°. The NH? C(CH₃)C?C? C?O(CH₃) fragment is nearly flat with a maximal deviation of total planarity of 10.4°. Copyright © 2007 John Wiley & Sons, Ltd.     

Extended X‐ray absorption fine structure and multiple‐scattering simulation of nickel dithiolene complexes Ni[S2C2(CF3)2]2n (n = −2, −1, 0) and an olefin adduct Ni[S2C2(CF3)2]2(1‐hexene)

A series of Ni dithiolene complexes Ni[S₂C₂(CF₃)]₂ⁿ (n = ?2, ?1, 0) ( 1 , 2 , 3 ) and a 1‐hexene adduct Ni[S₂C₂(CF₃)₂]₂(C₆H₁₂) ( 4 ) have been examined by Ni K‐edge X‐ray absorption near‐edge structure (XANES) and extended X‐ray absorption fine‐structure (EXAFS) spectroscopies. Ni XANES for 1 – 3 reveals clear pre‐edge features and approximately +0.7 eV shift in the Ni K‐edge position for `one‐electron' oxidation. EXAFS simulation shows that the Ni—S bond distances for 1 , 2 and 3 (2.11–2.16 Å) are within the typical values for square planar complexes and decrease by ～0.022 Å for each `one‐electron' oxidation. The changes in Ni K‐edge energy positions and Ni—S distances are consistent with the `non‐innocent' character of the dithiolene ligand. The Ni—C interactions at ～3.0 Å are analyzed and the multiple‐scattering parameters are also determined, leading to a better simulation for the overall EXAFS spectra. The 1‐hexene adduct 4 presents no pre‐edge feature, and its Ni K‐edge position shifts by ?0.8 eV in comparison with its starting dithiolene complex 3 . Consistently, EXAFS also showed that the Ni—S distances in 4 elongate by ～0.046 Å in comparison with 3 . The evidence confirms that the neutral complex is `reduced' upon addition of olefin, presumably by olefin donating the π‐electron density to the LUMO of 3 as suggested by UV/visible spectroscopy in the literature.     

Catalytic effect of water,water dimer,water trimer,HCOOH, H2SO4, CH3CH2COOH and HN(NO2)2 on the isomerisation of HN(NO2)2 to O2NNN(O)OH: a mechanism study

In this article, the isomerisation mechanisms of HN(NO₂)₂ to O₂NNN(O)OH without and with catalyst X (X = H₂O, (H₂O)₂, (H₂O)₃, HCOOH, H₂SO₄, CH₃CH₂COOH and HN(NO₂)₂) have been investigated theoretically at the CBS-QB3 level of theory. Our results show that the catalyst X (X = H₂O, (H₂O)₂, (H₂O)₃, HCOOH, H₂SO₄ and CH₃CH₂COOH) shows different positive catalytic effects on reducing the apparent activation energy of the isomerisation reaction processes. Such different catalytic effects are mainly related to the number of hydrogen bonds and the size of the ring structure in X (X = H₂O, (H₂O)₂ and (H₂O)₃)-assisted transition states, as well as different values of pK_a for H₂SO₄, HCOOH and CH₃CH₂COOH. Very interesting is also the fact that H₂SO₄-assisted reaction is the most favourable for the hydrogen transfer from HN(NO₂)₂ to O₂NNN(O)OH, due to the smallest pK_a (?3.0) value of H₂SO₄ than H₂O, HCOOH, H₂SO₄ and CH₃CH₂COOH, and also because of the largest ∠X???H???Y (the angle between the hydrogen bond donor and acceptor) involved in H₂SO₄-assisted transition state. Compared to the self-catalysis of the isomerisation mechanisms of HN(NO₂)₂ to O₂NNN(O)OH, the apparent activation energy of H₂SO₄-assisted channel also reduces by 9.6 kcal?mol^?1, indicating that H₂SO₄ can affect the isomerisation of HN(NO₂)₂ to O₂NNN(O)OH, most obvious among all the catalysts H₂O, (H₂O)₂, (H₂O)₃, HCOOH, H₂SO₄, CH₃CH₂COOH and HN(NO₂)₂.     

Raman spectroscopic study of the mineral gerstleyite Na2(Sb,As)8S13·2H2O and comparison with some heavy‐metal sulfides

The mineral gerstleyite is described as a sulfosalt as opposed to a sulfide. This study focuses on the Raman spectrum of gerstleyite Na₂(Sb,As)₈S₁₃·2H₂O and makes a comparison with the Raman spectra of other common sulfides including stibnite, cinnabar and realgar. The intense Raman bands of gerstleyite at 286 and 308 cm⁻¹ are assigned to the SbS₃E antisymmetric and A₁ symmetric stretching modes of the SbS₃ units. The band at 251 cm⁻¹ is assigned to the bending mode of the SbS₃ units. The mineral stibnite also has basic structural units of Sb₂S₃ and SbS₃ pyramids with C_3v symmetry. Raman bands of stibnite Sb₂S₃ at 250, 296, 372 and 448 cm⁻¹ are assigned to Sb S stretching vibrations and the bands at 145 and 188 cm⁻¹ to S Sb S bending modes. The Raman band for cinnabar HgS at 253 cm⁻¹ fits well with the assignment of the band for gerstleyite at 251 cm⁻¹ to the S Sb S bending mode. Raman bands in similar positions are observed for realgar AsS and orpiment As₂S₃. Copyright © 2010 John Wiley & Sons, Ltd.     

Theoretical study on the reactions of CH3NHNH2 with ground state O(3P) atom and excited state O(1D) atom

The reaction mechanisms of methylhydrazine (CH₃NHNH₂) with O(³P) and O(¹D) atoms have been explored theoretically at the MPW1K/6-311+G(d,p), MP2/6-311+G(d,p), MCG3-MPWPW91 (single-point), and CCSD(T)/cc-pVTZ (single-point) levels. The triplet potential energy surface for the reaction of CH₃NHNH₂ with O(³P) includes seven stable isomers and eight transition states. When the O(³P) atom approaches CH₃NHNH₂, the heavy atoms, namely N and C atoms, are the favourable combining points. O(³P) atom attacking the middle-N atom in CH₃NHNH₂ results in the formation of an energy-rich isomer (CH₃NHONH₂) followed by migration of O(³P) atom from middle-N atom to middle-H atom leading to the product P6 (CH₃NNH₂+OH), which is one of the most favourable routes. The estimated major product CH₃NNH₂ is consistent with the experimental measurements. Reaction of O(¹D) + CH₃NHNH₂ presents different features as compared with O(³P) + CH₃NHNH₂. O(¹D) atom will first insert into C–H2, N1–H4, and N2–H5 bonds barrierlessly to form the three adducts, respectively. There are two most favourable paths for O(¹D) + CH₃NHNH₂. One is that the C–N bond cleavage accompanied by a concerted H shift from O atom to N atom (mid-N) leads to the product P_I (CH₂O + NH₂NH₂), and the other is that the N–N bond rupture along with a concerted H shift from O to N (end-N) forms P_IV (CH₃NH₂ + HNO). The similarities and discrepancies between two reactions are discussed.     

Weak and strong hydrogen bonds conducting the supramolecular framework of 1-butyl-3-(1-naphthoyl)thiourea: crystal structure,vibrational studies,DFT methods,Pixel energies and Hirshfeld surface analysis

A detailed structural and spectroscopic study of a new thiourea derivative 1-butyl-3-(1-naphthoyl)thiourea (1) is presented with the assistance of theoretical calculations. The X-ray diffraction structure analysis reveals a planar carbonylthiourea group, favoured by intra-molecular NH···O bond. The compound is arranged in the lattice as NH···O and NH···S bonded polymeric ribbons, that extend along the crystal b-axis. Molecular pairs involving N–H···S hydrogen bonds are a dominant contribution to packing stabilisation coming from coulombic component. Hirshfeld surfaces and two-dimensional-fingerprint plots show different intermolecular contacts and its relative contributions to total surface in each compound. The AIM approach shows the nature and strength of the strong and weak intramolecular interactions and the solvent effect, while NBO analysis reveals that the sulphur atom is responsible for the higher hyperconjugative stabilising energy.     

Determination of N and O‐atoms and N2 (A) Metastable Molecule Densities in the Afterglows of N2‐H2, Ar‐N2‐H2 and Ar‐N2‐O2 Microwave Discharges

Early afterglows of N₂‐H₂, Ar‐N₂‐H₂ and Ar‐N₂‐O₂ flowing microwave discharges are characterized by optical emission spectroscopy. The N and O atoms and the N₂ (A) metastable molecule densities are determined by optical emission spectroscopy after calibration by NO titration for N and O‐atoms and measurements of NO and N₂ band intensities. If an uncertainty of 30% is estimated on N‐atomic density, an inaccuracy of one order of magnitude is obtained on the O and N₂ (A) densities. In N₂‐(0.05‐2.5%)H₂ and Ar‐(1‐50%)N₂‐(0.05‐2.5%) H₂ gas mixtures, the O‐atoms are coming from O₂ impurities in the discharge. Concentrations of N and O‐atoms and of N₂ (A) densities are compared to the ones obtained in Ar‐(5‐50%)N₂‐(0.2‐2.5%) O₂ gas mixtures in which a controlled amount of O₂ is added. (© 2014 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Joint theoretical and experimental study of the gas‐phase elimination kinetics of tert‐butyl ester of carbamic,N, N‐dimethylcarbamic,N‐hydroxycarbamic acids and 1‐(tert‐butoxycarbonyl)‐imidazole

The gas‐phase elimination kinetics of the title compounds were carried out in a static reaction system and seasoned with allyl bromide. The working temperature and pressure ranges were 200–280 °C and 22–201.5 Torr, respectively. The reactions are homogeneous, unimolecular, and follow a first‐order rate law. These substrates produce isobutene and corresponding carbamic acid in the rate‐determining step. The unstable carbamic acid intermediate rapidly decarboxylates through a four‐membered cyclic transition state (TS) to give the corresponding organic nitrogen compound. The temperature dependence of the rate coefficients is expressed by the following Arrhenius equations: for tert‐butyl carbamate logk₁ (s^?1) = (13.02 ± 0.46) – (161.6 ± 4.7) kJ/mol(2.303 RT)^?1, for tert‐butyl N‐hydroxycarbamate logk₁ (s^?1) = (12.52 ± 0.11) – (147.8 ± 1.1) kJ/mol(2.303 RT)^?1, and for 1‐(tert‐butoxycarbonyl)‐imidazole logk₁ (s^?1) = (11.63 ± 0.21)–(134.9 ± 2.0) kJ/mol(2.303 RT)^?1. Theoretical studies of these elimination were performed at Møller–Plesset MP2/6‐31G and DFT B3LYP/6‐31G(d), B3LYP/6‐31G(d,p) levels of theory. The calculated bond orders, NBO charges, and synchronicity (Sy) indicate that these reactions are concerted, slightly asynchronous, and proceed through a six‐membered cyclic TS type. Results for estimated kinetic and thermodynamic parameters are discussed in terms of the proposed reaction mechanism and TS structure. Copyright © 2007 John Wiley & Sons, Ltd.     

Comparison of SERRS and RRS excitation profiles of [Fe(tpy)2]2+ (tpy = 2,2':6',2'‐terpyridine) supported by DFT calculations: effect of the electrostatic bonding to chloride‐modified Ag nanoparticles on its vibrational and electronic structure

Nonresonance (or normal) Raman scattering (NRS), resonance Raman scattering (RRS), surface‐enhanced Raman scattering (SERS), and surface‐enhanced RRS (SERRS) spectra of [Fe(tpy)₂]²⁺ complex dication (tpy = 2,2':6',2''‐terpyridine) are reported. The comparison of RRS/NRS and SERRS/SERS excitation profiles of [Fe(tpy)₂]²⁺ spectral bands in the range of 445–780 nm is supported by density functional theory (DFT) calculations, Raman depolarization measurements, comparison of the solid [Fe(tpy)₂](SO₄)₂ and solution RRS spectra, and characterization of the Ag nanoparticle (NP) hydrosol/[Fe(tpy)₂]²⁺ SERS/SERRS active system by surface plasmon extinction spectrum and transmission electron microscopy image of the fractal aggregates (D = 1.82). By DFT calculations, both the Raman active modes and the electronic states of the complex have been assigned to the symmetry species of the D_2d point group. It has been demonstrated that upon the electrostatic bonding of the complex dication to the chloride‐modified Ag NPs, the geometric and ground state electronic structure of the complex and the identity of the three different metal‐to‐ligand charge transfer (¹MLCT) electronic transitions remain preserved. On the other hand, the effect of ion pairing manifests itself by a slight change in localization of one of the electronic transitions (with max. at 552 nm) as well as by promotion of the Herzberg–Teller activation of E modes resulting from coupling of E and B₂ excited electronic states. Finally, the very low, 1 × 10⁻¹¹ M SERRS spectral detection limit of [Fe(tpy)₂]²⁺ at 532‐nm excitation is attributed to a concerted action of the electromagnetic and molecular resonance mechanism, in conjunction to the electrostatic bonding of the complex dication to the chloride‐modified Ag NP surface. Copyright © 2014 John Wiley & Sons, Ltd.     

Structural,vibrational spectra and normal coordinate analysis for two tautomers of 4(5)‐(2′‐furyl)‐imidazole

We have synthesized both the 4 and 5 tautomeric forms of 4(5)‐(2′‐furyl)‐imidazole (1) and investigated their molecular vibrations by infrared and Raman spectroscopies as well as by calculation based on the density functional theory (DFT) approach. Examination of the temperature dependence of IR intensity revealed the band characteristics of the 4 and 5 tautomers of (1). Comparison of experimental and calculated chemical shifts in nuclear magnetic resonance (NMR) spectroscopy was made in order to identify the two tautomeric forms. The assignment of vibrational normal modes was performed, and the force field obtained reproduced the experimental vibrational wavenumbers with a root mean‐square deviation (RMSD) value of ca. 13 cm⁻¹ for both tautomers. The natural bond orbital (NBO) study reveals the characteristics of the electronic delocalization of the two tautomeric structures. Copyright © 2009 John Wiley & Sons, Ltd.     

Facile Synthesis of Gd(OH)3‐Doped Fe3O4 Nanoparticles for Dual‐Mode T1‐ and T2‐Weighted Magnetic Resonance Imaging Applications

The facile hydrothermal synthesis of polyethyleneimine (PEI)‐coated iron oxide (Fe₃O₄) nanoparticles (NPs) doped with Gd(OH)₃ (Fe₃O₄‐Gd(OH)₃‐PEI NPs) for dual mode T₁‐ and T₂‐weighted magnetic resonance (MR) imaging applications is reported. In this approach, Fe₃O₄‐Gd(OH)₃‐PEI NPs are synthesized via a hydrothermal method in the presence of branched PEI and Gd(III) ions. The PEI coating onto the particle surfaces enables further modification of poly(ethylene glycol) (PEG) in order to render the particles with good water dispersibility and improved biocompatibility. The formed Fe₃O₄‐Gd(OH)₃‐PEI‐PEG NPs have a Gd/Fe molar ratio of 0.25:1 and a mean particle size of 14.4 nm and display a relatively high r₂ (151.37 × 10^?3m ^?1 s^?1) and r₁ (5.63 × 10^?3m ^?1 s^?1) relaxivity, affording their uses as a unique contrast agent for T₁‐ and T₂‐weighted MR imaging of rat livers after mesenteric vein injection of the particles and the mouse liver after intravenous injection of the particles, respectively. The developed Fe₃O₄‐Gd(OH)₃‐PEI‐PEG NPs may hold great promise to be used as a contrast agent for dual mode T₁‐ and T₂‐weighted self‐confirmation MR imaging of different biological systems.     

Solvent‐dependent structural dynamics of 2(1H)‐pyridinone in light absorbing S4(ππ*) state

The B‐band resonance Raman spectra of 2(1H)‐pyridinone (NHP) in water and acetonitrile were obtained, and their intensity patterns were found to be significantly different. To explore the underlying excited state tautomeric reaction mechanisms of NHP in water and acetonitrile, the vibrational analysis was carried out for NHP, 2(1D)‐pyridinone (NDP), NHP–(H₂O)_n (n = 1, 2) clusters, and NDP–(D₂O)_n (n = 1, 2) clusters on the basis of the FT‐Raman experiments, the B3LYP/6‐311++G(d,p) computations using PCM solvent model, and the normal mode analysis. Good agreements between experimental and theoretically predicted frequencies and intensities in different surrounding environments enabled reliable assignments of Raman bands in both the FT‐Raman and the resonance Raman spectra. The results indicated that most of the B‐band resonance Raman spectra in H₂O was assignable to the fundamental, overtones, and combination bands of about ten vibration modes of ring‐type NHP–(H₂O)₂ cluster, while most of the B‐band resonance Raman spectra in CH₃CN was assigned to the fundamental, overtones, and combination bands of about eight vibration modes of linear‐type NHP–CH₃CN. The solvent effect of the excited state enol‐keto tautomeric reaction mechanisms was explored on the basis of the significant difference in the short‐time structural dynamics of NHP in H₂O and CH₃CN. The inter‐molecular and intra‐molecular ESPT reaction mechanisms were proposed respectively to explain the Franck–Condon region structural dynamics of NHP in H₂O and CH₃CN.Copyright © 2015 John Wiley & Sons, Ltd.     

A theoretical study of hemiacetal formation from the reaction of methanol with derivatives of CX3CHO (X = H,F, Cl,Br and I)

A theoretical study of the hemiacetal formation reaction between methanol and CX₃CHO (X = H, F, Cl, Br, and I) has been carried out using density functional theory and Becke, three‐parameter, Lee–Yang–Parr/6‐311++G(d,p) computational methods. The stationary points of the reaction between the isolated molecules and the reaction catalyzed by an additional methanol molecule have been characterized. Because the final products present a stereogenic center, the potential autocatalysis of the reaction has been examined and also the possibility of spontaneous generation of chirality when the hemiacetal molecules are involved in the transition state structure. High barriers are found in the reaction between the isolated molecules that are reduced by the assistance of an additional molecule (methanol or hemiacetal product). The reactions catalyzed by the hemiacetal products show higher barriers than the one catalyzed by methanol. Copyright © 2012 John Wiley & Sons, Ltd.     

A reaction cell for time‐resolved in situ XAS studies during wet chemical synthesis: the Cu2(OH)3Cl case

The use of in situ time‐resolved dispersive X‐ray absorption spectroscopy (DXAS) to monitor the formation of Cu₂(OH)₃Cl particles in an aqueous solution is reported. The measurements were performed using a dedicated reaction cell, which enabled the evolution of the Cu K‐edge X‐ray absorption near‐edge spectroscopy to be followed during mild chemical synthesis. The formed Cu₂(OH)₃Cl particles were also characterized by synchrotron‐radiation‐excited X‐ray photoelectron spectroscopy, X‐ray diffraction and scanning electron microscopy. The influence of polyvinylpyrrolidone (PVP) on the electronic and structural properties of the formed particles was investigated. The results indicate clearly the formation of Cu₂(OH)₃Cl, with or without the use of PVP, which presents very similar crystalline structures in the long‐range order. However, depending on the reaction, dramatic differences were observed by in situ DXAS in the vicinities of the Cu atoms.