A stabilized Nitsche‐type extended embedding mesh approach for 3D low‐ and high‐Reynolds‐number flows

This paper presents a stabilized extended finite element method (XFEM) based fluid formulation to embed arbitrary fluid patches into a fixed background fluid mesh. The new approach is highly beneficial when it comes to computational grid generation for complex domains, as it allows locally increased resolutions independent from size and structure of the background mesh. Motivating applications for such a domain decomposition technique are complex fluid‐structure interaction problems, where an additional boundary layer mesh is used to accurately capture the flow around the structure. The objective of this work is to provide an accurate and robust XFEM‐based coupling for low‐ as well as high‐Reynolds‐number flows. Our formulation is built from the following essential ingredients: Coupling conditions on the embedded interface are imposed weakly using Nitsche's method supported by extra terms to guarantee mass conservation and to control the convective mass transport across the interface for transient viscous‐dominated and convection‐dominated flows. Residual‐based fluid stabilizations in the interior of the fluid subdomains and accompanying face‐oriented fluid and ghost‐penalty stabilizations in the interface zone stabilize the formulation in the entire fluid domain. A detailed numerical study of our stabilized embedded fluid formulation, including an investigation of variants of Nitsche's method for viscous flows, shows optimal error convergence for viscous‐dominated and convection‐dominated flow problems independent of the interface position. Challenging two‐dimensional and three‐dimensional numerical examples highlight the robustness of our approach in all flow regimes: benchmark computations for laminar flow around a cylinder, a turbulent driven cavity flow at Re = 10000 and the flow interacting with a three‐dimensional flexible wall. Copyright © 2016 John Wiley & Sons, Ltd.     

Nonisothermal two‐ and three‐dimensional flow simulations of inelastic and viscoelastic fluids by a finite‐volume method

This paper applies the finite‐volume method to computations of steady flows of viscous and viscoelastic incompressible fluids in complex two and three‐dimensional geometries. The materials adopted in the study obey different constitutive laws: Newtonian, purely viscous Carreau–Yasuda as also Upper‐Convected Maxwell and Phan‐Thien/Tanner differential models, with a Williams–Landel–Ferry (WLF) equation for temperature dependence. Specific analyses are made depending on the rheological model. A staggered grid is used for discretizing the equations and unknowns. Stockage possibilities allow us to solve problems involving a great number of degrees of freedom, up to 1 500 000 unknowns with a desk computer. In relation to the fluid properties, our numerical simulations provide flow characteristics for various 2D and 3D configurations and demonstrate the possibilities of the code to solve problems involving complex nonlinear constitutive equations with thermal effects. Copyright © 2009 John Wiley & Sons, Ltd.     

A fixed‐grid b‐spline finite element technique for fluid–structure interaction

We present a fixed‐grid finite element technique for fluid–structure interaction problems involving incompressible viscous flows and thin structures. The flow equations are discretised with isoparametric b‐spline basis functions defined on a logically Cartesian grid. In addition, the previously proposed subdivision‐stabilisation technique is used to ensure inf–sup stability. The beam equations are discretised with b‐splines and the shell equations with subdivision basis functions, both leading to a rotation‐free formulation. The interface conditions between the fluid and the structure are enforced with the Nitsche technique. The resulting coupled system of equations is solved with a Dirichlet–Robin partitioning scheme, and the fluid equations are solved with a pressure–correction method. Auxiliary techniques employed for improving numerical robustness include the level‐set based implicit representation of the structure interface on the fluid grid, a cut‐cell integration algorithm based on marching tetrahedra and the conservative data transfer between the fluid and structure discretisations. A number of verification and validation examples, primarily motivated by animal locomotion in air or water, demonstrate the robustness and efficiency of our approach. Copyright © 2013 John Wiley & Sons, Ltd.     

Multi‐material incompressible flow simulation using the moment‐of‐fluid method

This paper compares the numerical performance of the moment‐of‐fluid (MOF) interface reconstruction technique with Youngs, LVIRA, power diagram (PD), and Swartz interface reconstruction techniques in the context of a volume‐of‐fluid (VOF) based finite element projection method for the numerical simulation of variable‐density incompressible viscous flows. In pure advection tests with multiple materials MOF shows dramatic improvements in accuracy compared with the other methods. In incompressible flows where density differences determine the flow evolution, all the methods perform similarly for two material flows on structured grids. On unstructured grids, the second‐order MOF, LVIRA, and Swartz methods perform similarly and show improvement over the first‐order Youngs' and PD methods. For flow simulations with more than two materials, MOF shows increased accuracy in interface positions on coarse meshes. In most cases, the convergence and accuracy of the computed flow solution was not strongly affected by interface reconstruction method. Published in 2009 by John Wiley & Sons, Ltd.     

Numerical errors of the volume‐of‐fluid interface tracking algorithm

One of the important limitations of the interface tracking algorithms is that they can be used only as long as the local computational grid density allows surface tracking. In a dispersed flow, where the dimensions of the particular fluid parts are comparable or smaller than the grid spacing, several numerical and reconstruction errors become considerable. In this paper the analysis of the interface tracking errors is performed for the volume‐of‐fluid method with the least squares volume of fluid interface reconstruction algorithm. A few simple two‐fluid benchmarks are proposed for the investigation of the interface tracking grid dependence. The expression based on the gradient of the volume fraction variable is introduced for the estimation of the reconstruction correctness and can be used for the activation of an adaptive mesh refinement algorithm. Copyright © 2002 John Wiley & Sons, Ltd.     

A robust multi‐grid pressure‐based algorithm for multi‐fluid flow at all speeds

This paper reports on the implementation and testing, within a full non‐linear multi‐grid environment, of a new pressure‐based algorithm for the prediction of multi‐fluid flow at all speeds. The algorithm is part of the mass conservation‐based algorithms (MCBA) group in which the pressure correction equation is derived from overall mass conservation. The performance of the new method is assessed by solving a series of two‐dimensional two‐fluid flow test problems varying from turbulent low Mach number to supersonic flows, and from very low to high fluid density ratios. Solutions are generated for several grid sizes using the single grid (SG), the prolongation grid (PG), and the full non‐linear multi‐grid (FMG) methods. The main outcomes of this study are: (i) a clear demonstration of the ability of the FMG method to tackle the added non‐linearity of multi‐fluid flows, which is manifested through the performance jump observed when using the non‐linear multi‐grid approach as compared to the SG and PG methods; (ii) the extension of the FMG method to predict turbulent multi‐fluid flows at all speeds. The convergence history plots and CPU‐times presented indicate that the FMG method is far more efficient than the PG method and accelerates the convergence rate over the SG method, for the problems solved and the grids used, by a factor reaching a value as high as 15. Copyright © 2003 John Wiley & Sons, Ltd.     

Two‐dimensional compact finite difference immersed boundary method

We present a compact finite differences method for the calculation of two‐dimensional viscous flows in biological fluid dynamics applications. This is achieved by using body‐forces that allow for the imposition of boundary conditions in an immersed moving boundary that does not coincide with the computational grid. The unsteady, incompressible Navier–Stokes equations are solved in a Cartesian staggered grid with fourth‐order Runge–Kutta temporal discretization and fourth‐order compact schemes for spatial discretization, used to achieve highly accurate calculations. Special attention is given to the interpolation schemes on the boundary of the immersed body. The accuracy of the immersed boundary solver is verified through grid convergence studies. Validation of the method is done by comparison with reference experimental results. In order to demonstrate the application of the method, 2D small insect hovering flight is calculated and compared with available experimental and computational results. Copyright © 2009 John Wiley & Sons, Ltd.     

An unstructured/structured multi‐layer hybrid grid method and its application

A multi‐layer hybrid grid method is constructed to simulate complex flow field around 2‐D and 3‐D configuration. The method combines Cartesian grids with structured grids and triangular meshes to provide great flexibility in discretizing a domain. We generate the body‐fitted structured grids near the wall surface and the Cartesian grids for the far field. In addition, we regard the triangular meshes as an adhesive to link each grid part. Coupled with a tree data structure, the Cartesian grid is generated automatically through a cell‐cutting algorithm. The grid merging methodology is discussed, which can smooth hybrid grids and improve the quality of the grids. A cell‐centred finite volume flow solver has been developed in combination with a dual‐time stepping scheme. The flow solver supports arbitrary control volume cells. Both inviscid and viscous flows are computed by solving the Euler and Navier–Stokes equations. The above methods and algorithms have been validated on some test cases. Computed results are presented and compared with experimental data. Copyright © 2006 John Wiley & Sons, Ltd.     

A fractional two‐step implicit algorithm using curvilinear collected grids

An efficient fractional two‐step implicit algorithm is reported to simulate incompressible fluid flows in a boundary‐fitted curvilinear collocated grid system. Using the finite volume method, the convection terms are discretized by the high‐accuracy Roe's scheme to minimize numerical diffusion. An implicitness coefficient Π is introduced to accelerate the rate of convergence. It is demonstrated that the proposed algorithm links the fractional step method to the pressure correction procedure, and the SIMPLEC method could be considered as a special case of the fractional two‐step implicit algorithm (when Π=1). The proposed algorithm is applicable to unsteady flows and steady flows. Three benchmark two‐dimensional laminar flows are tested to evaluate the performance of the proposed algorithm. Performance is measured by sensitivity analyses of the efficiency, accuracy, grid density, grid skewness and Reynolds number on the solutions. Results show that the model is efficient and robust. Copyright © 2006 John Wiley & Sons, Ltd.     

A meshless method for numerical simulation of depth‐averaged turbulence flows using a k‐ϵ model

A three‐dimensional numerical model is developed to analyze free surface flows and water impact problems. The flow of an incompressible viscous fluid is solved using the unsteady Navier–Stokes equations. Pseudo‐time derivatives are introduced into the equations to improve computational efficiency. The interface between the two phases is tracked using a volume‐of‐fluid interface tracking algorithm developed in a generalized curvilinear coordinate system. The accuracy of the volume‐of‐fluid method is first evaluated by the multiple numerical benchmark tests, including two‐dimensional and three‐dimensional deformation cases on curvilinear grids. The performance and capability of the numerical model for water impact problems are demonstrated by simulations of water entries of the free‐falling hemisphere and cone, based on comparisons of water impact loadings, velocities, and penetrations of the body with experimental data. For further validation, computations of the dam‐break flows are presented, based on an analysis of the wave front propagation, water level, and the dynamic pressure impact of the waves on the downstream walls, on a specific container, and on a tall structure. Extensive comparisons between the obtained solutions, the experimental data, and the results of other numerical simulations in the literature are presented and show a good agreement. Copyright © 2015 John Wiley & Sons, Ltd.     

A sharp‐interface immersed boundary framework for simulations of high‐speed inviscid compressible flows

A new finite‐volume flow solver based on the hybrid Cartesian immersed boundary (IB) framework is developed for the solution of high‐speed inviscid compressible flows. The IB method adopts a sharp‐interface approach, wherein the boundary conditions are enforced on the body geometry itself. A key component of the present solver is a novel reconstruction approach, in conjunction with inverse distance weighting, to compute the solutions in the vicinity of the solid‐fluid interface. We show that proposed reconstruction leads to second‐order spatial accuracy while also ensuring that the discrete conservation errors diminish linearly with grid refinement. Investigations of supersonic and hypersonic inviscid flows over different geometries are carried out for an extensive validation of the proposed flow solver. Studies on cylinder lift‐off and shape optimisation in supersonic flows further demonstrate the efficacy of the flow solver for computations with moving and shape‐changing geometries. These studies conclusively highlight the capability of the proposed IB methodology as a promising alternative for robust and accurate computations of compressible fluid flows on nonconformal Cartesian meshes.     

Incompressible multiphase flow and encapsulation simulations using the moment‐of‐fluid method

A moment‐of‐fluid method is presented for computing solutions to incompressible multiphase flows in which the number of materials can be greater than two. In this work, the multimaterial moment‐of‐fluid interface representation technique is applied to simulating surface tension effects at points where three materials meet. The advection terms are solved using a directionally split cell integrated semi‐Lagrangian algorithm, and the projection method is used to evaluate the pressure gradient force term. The underlying computational grid is a dynamic block‐structured adaptive grid. The new method is applied to multiphase problems illustrating contact‐line dynamics, triple junctions, and encapsulation in order to demonstrate its capabilities. Examples are given in two‐dimensional, three‐dimensional axisymmetric (R–Z), and three‐dimensional (X–Y–Z) coordinate systems. Copyright © 2015 John Wiley & Sons, Ltd.     

On high‐resolution schemes for solving unsteady compressible two‐phase dilute viscous flows

A high‐resolution numerical scheme based on the MUSCL–Hancock approach is developed to solve unsteady compressible two‐phase dilute viscous flow. Numerical considerations for the development of the scheme are provided. Several solvers for the Godunov fluxes are tested and the results lead to the choice of an exact Riemann solver adapted for both gaseous and dispersed phases. The accuracy of the scheme is proven step by step through specific test cases. These simulations are for one‐phase viscous flows over a flat plate in subsonic and supersonic regimes, unsteady flows in a low‐pressure shock tube, two‐phase dilute viscous flows over a flat plate and, finally, two‐phase unsteady viscous flows in a shock tube. The results are compared with well‐established analytical and numerical solutions and very good agreement is achieved. Copyright © 1999 John Wiley & Sons, Ltd.     

An immersed‐boundary finite‐volume method for direct simulation of flows with suspended paramagnetic particles

In the present study, we have proposed an immersed‐boundary finite‐volume method for the direct numerical simulation of flows with inertialess paramagnetic particles suspended in a nonmagnetic fluid under an external magnetic field without the need for any model such as the dipole–dipole interaction. In the proposed method, the magnetic field (or force) is described by the numerical solution of the Maxwell equation without current, where the smoothed representation technique is employed to tackle the discontinuity of magnetic permeability across the particle–fluid interface. The flow field, on the other hand, is described by the solution of the continuity and momentum equations, where the discrete‐forcing‐based immersed‐boundary method is employed to satisfy the no‐slip condition at the interface. To validate the method, we performed numerical simulations on the two‐dimensional motion of two and three paramagnetic particles in a nonmagnetic fluid subjected to an external uniform magnetic field and then compared the results with the existing finite‐element and semi‐analytical solutions. Comparison shows that the proposed method is robust in the direct simulation of such magnetic particulate flows. This method can be extended to more general flows without difficulty: three‐dimensional particulate flows, flows with a great number of particles, or flows under an arbitrary external magnetic field. Copyright © 2010 John Wiley & Sons, Ltd.     

Development of new finite volume schemes on unstructured triangular grid for simulating the gas–liquid two‐phase flow

This paper presents a coupled finite volume inner doubly iterative efficient algorithm for linked equations (IDEAL) with level set method to simulate the incompressible gas–liquid two‐phase flows with moving interfaces on unstructured triangular grid. The finite volume IDEAL method on a collocated grid is employed to solve the incompressible two‐phase Navier–Stokes equations, and the level set method is used to capture the moving interfaces. For the sake of mass conservation, an effective second‐order accurate finite volume scheme is developed to solve the level set equation on triangular grid, which can be implemented much easier than the classical high‐order level set solvers. In this scheme, the value of level set function on the boundary of control volume is approximated using a linear combination of a high‐order Larangian interpolation and a second‐order upwind interpolation. By the rotating slotted disk and stretching and shrinking of a circular fluid element benchmark cases, the mass conservation and accuracy of the new scheme is verified. Then the coupled method is applied to two‐phase flows, including a 2D bubble rising problem and a 2D dam breaking problem. The computational results agree well with those reported in literatures and experimental data. Copyright © 2015 John Wiley & Sons, Ltd.     

A high‐resolution method for compressible two‐fluid flows and simulation of three‐dimensional shock–bubble interactions

A high‐resolution method is developed to capture the material interfaces of compressible two‐fluid flows in multiple dimensions. A fluid mixture model system with single velocity and pressure is used, and viscous effect can also be taken into account. A consistent thermodynamic law based on the assumption of pressure equilibrium is employed to describe the thermodynamic behaviors of the pure fluids and mixture of two components. The splitting and unsplit Eulerian formulations of piecewise parabolic method are extended to numerically integrate the hyperbolic part of the model system, whereas the system of diffusion equations is solved using an explicit, central difference scheme. The block‐structured adaptive mesh refinement (AMR) capability is built in the hydrodynamic code to locally improve grid resolution. The resulting method is verified to be at least second‐order accurate in space. Numerical results show that the discontinuities, particularly contact discontinuities, can be resolved sharply. The use of AMR allows flow features at disparate scales to be resolved sufficiently. In addition, three‐dimensional shock–bubble interactions are simulated to investigate effects of Mach number on bubble evolution. The flow structures including those peculiar to three‐dimensional bubble are resolved correctly, and some physical phenomena with increasing Mach number are reported. Copyright © 2012 John Wiley & Sons, Ltd.     

An extended mixture model for the simultaneous treatment of small‐scale and large‐scale interfaces

The aim of this work is to present a new model based on the volume of fluid method and the algebraic slip mixture model in order to solve multiphase gas–fluid flows with different interface scales and the transition among them. The interface scale is characterized by a measure of the grid, which acts as a geometrical filter and is related with the accuracy in the solution; in this sense, the presented coupled model allows to reduce the grid requirements for a given accuracy. With this objective in mind, a generalization of the algebraic slip mixture model is proposed to solve problems involving small‐scale and large‐scale interfaces in an unified framework taking special care in preserving the conservativeness of the fluxes. This model is implemented using the OpenFOAM^® libraries to generate a tool capable of solving large problems on high‐performance computing facilities. Several examples are solved as a validation for the presented model, including new quantitative measurements to assess the advantages of the method. Copyright © 2014 John Wiley & Sons, Ltd.     

A high‐order upwind control‐volume method based on integrated RBFs for fluid‐flow problems

This paper is concerned with the development of a high‐order upwind conservative discretization method for the simulation of flows of a Newtonian fluid in two dimensions. The fluid‐flow domain is discretized using a Cartesian grid from which non‐overlapping rectangular control volumes are formed. Line integrals arising from the integration of the diffusion and convection terms over control volumes are evaluated using the middle‐point rule. One‐dimensional integrated radial basis function schemes using the multiquadric basis function are employed to represent the variations of the field variables along the grid lines. The convection term is effectively treated using an upwind scheme with the deferred‐correction strategy. Several highly non‐linear test problems governed by the Burgers and the Navier–Stokes equations are simulated, which show that the proposed technique is stable, accurate and converges well. Copyright © 2010 John Wiley & Sons, Ltd.     

A coupled surface‐subsurface model for hydrostatic flows under saturated and variably saturated conditions

In this paper, the governing differential equations for hydrostatic surface‐subsurface flows are derived from the Richards and from the Navier‐Stokes equations. A vertically integrated continuity equation is formulated to account for both surface and subsurface flows under saturated and variable saturated conditions. Numerically, the horizontal domain is covered by an unstructured orthogonal grid that may include subgrid specifications. Along the vertical direction, a simple z‐layer discretization is adopted. Semi‐implicit finite difference equations for velocities, and a finite volume approximation for the vertically integrated continuity equation, are derived in such a fashion that, after simple manipulation, the resulting discrete pressure equation can be assembled into a single, two‐dimensional, mildly nonlinear system. This system is solved by a nested Newton‐type method, which yields simultaneously the (hydrostatic) pressure and a nonnegative fluid volume throughout the computational grid. The resulting algorithm is relatively simple, extremely efficient, and very accurate. Stability, convergence, and exact mass conservation are assured throughout also in presence of wetting and drying, in variable saturated conditions, and during flow transition through the soil interface. A few examples illustrate the model applicability and demonstrate the effectiveness of the proposed algorithm.