POLYBINAPHTHYLS INCORPORATING (R)-2,2’-BINAPHTHO-20-CROWN-6 AND NAPHTHYL MOITIES

Chiral polymer was synthesized by the polymerization of （R）-6,6＇-bistributylstannyl-2,2＇-binaphtho-20-crown-6 （M-1） with 1,4-dibromo-2,3-bisbutoxy-naphthyl （M-2） by Pd（PPhs）4 catalyzed Stille coupling reaction. Both monomer and polymer were analyzed by NMR, MS, FT-IR, UV, polarimetry, DSC-TGA, CD, fluorescent spectroscopy and GPC. The major difference between monomer and polymer is that a long wavelength Cotton Effect was observed for the polymer due to its more extended conjugation in the repeating unit and a highly rigid backbone in the polymer chain. Polymer has strong blue fluorescence due to the efficient energy migration from the extended n-electronic structure of the repeating unit of the polymer to the chiral binaphthyl core and is expected to have potential application in the materials of fluorescent sensors and chiral chromatographic packing for resolution ofracemic amino acid.     

PREPARATION OF POLY（ETHYLENEGLYCOL-co-ACRYLIC ACID） MICROSPHERES WITH DIVINYLBENZNE AS CROSSLINKER BY DISTILLATION-PRECIPITATION POLYMERIZATION

Monodisperse poly（poly（ethyleneglycol） methyl ether acrylate-co-acrylic acid） （poly（PEGMA-co-AA）） microspheres were prepared by distillation-precipitation polymerization with divinylbenzene （DVB） as crosslinker with 2,2＇- azobisisobutyronitrile （AIBN） as initiator in neat acetonitrile without stirring. Under various reaction conditions, four distinct morphologies including the sol, microemulsion, microgels and microspheres were formed during the distillation of the solvent from the reaction system. A 2D morphological map was established as a function of crosslinker concentration and the polar monomer AA concentration, in comonomer feed in the transition between the morphology domains. The effect of the covalent crosslinker DVB on the morphology of the polymer network was investigated in detail at AA fraction of 40 vol%. The ratios of acid to ethylene oxide units presenting in the comonomers dramatically affected the polymer-polymer interaction and hence the morphology of the resultant polymer network. The covalent crosslinking by DVB and the hydrogen bonding crosslinking between two acid units as well as between the acid and ethylene oxide unit played key roles in the formation of monodisperse polymer microspheres.     

Polyethylenimine （PEI）-g-comb-poly（ethylene glycol）-transferrin（Ⅰ）： Tumor-targeted Vector for Gene Delivery In.vitro

The work described the synthesis and evaluation of PEI-g-comb-PEG-transferrin as a potential system for gene therapy in vitro. The MW of PEG was 10KDa, and PEI was 2KDa. Its structure was identified by NMR, FT-IR and TGA spectroscopy. MTT assay found that at concentration up to 4000 n mol/L of the polymer, cell viability was over 85%. The bio-character of polymer/DNA complex was characterized by agarose gel electrophoresis, ethidium bromide exclusion and zeta-potential assay. The polymer could retardate DNA at N/P ratio 3.0-3.5 （mol/mol）. The particle size of the polymer/DNA complex was less than 300 nm. Transfection efficiency of the complex was studied in COS7 and NT2 cell lines.     

Effect of tetrabutylammonium bromide on enzymatic polymerization of phenol catalyzed by horseradish peroxidase

In this article tetrabutylammonium bromide （TBAB） was first added in buffer to compose a convenient and environmentally friendly system, and enzymatic polymerization of phenol catalyzed by horseradish peroxidase （HRP） could proceed efficiently in this system. When TBAB was added, the most conversion of phenol could reach 99.1%. The phenol polymer was considered to consist of a mixture of phenylene （Ph） and oxyphenylene （Ox） units by IR analysis, and the ratio of phenylene to oxyphenylene units （Ph/Ox） was measured by titration. Moreover, the effects of the dosage of horseradish peroxidase （HRP） and pH value on the conversion of phenol were investigated. The reaction performed very effectively in this novel system when the addition of HRP was only 0.2 mg. In all cases, the weight-average molecular weight calculated by GPC-SLS was in a range from 12000 Da to 30000 Da. The phenol polymer prepared in the present research possessed good thermal stability shown by TG analysis.     

Synthesis of pyridine-based poly(N-arylenebenzimidazole sulfone)

Poly（N-arylenebenzimidazole pyridine sulfone）（PNABIPS） has been prepared via the aromatic nucleophilic displacement reaction of 2,6-bis（2-benzimidazoly）pyridine（BBP） with bis（4-fluorophenyl） sulfone.BBP was synthesized by reaction of 2,6- pyridinedicarboxylic acid with 1,2-phenylenediamine in polyphosphoric acid.The chemical structure of BBP was confirmed by FTIR, HRMS,¹H NMR and ¹³C NMR.The characterization of the polymer was performed with FT-IR,¹H NMR,elemental analysis, GPC,XRD,DSC,TGA and solubility tests.The polymer was obtained in quantitative yield with M_n value 12,600 and M_w value 28,300,respectively.DSC and TGA measurements show that the glass transition temperature（T_g） is 312℃ and 5%weight loss temperature is 434℃ in nitrogen and 545℃ in air,respectively.In addition,the novel polymer exhibits good solubility,which can be dissolved in common organic solvent at room temperature.     

Synthesis and photocatalytic activity of TiO2/conjugated polymer complex nanoparticles

A photocatalyst of nanometer TiO2/conjugated polymer complex was successfully synthesized and characterized by spectroscopic methods and photocatalytic experiments. The complex photocatalyst could be activated by absorbing both ultraviolet and visible light （λ = 190-800 nm）. Methylene blue （MB） could be degraded more efficiently on the complex photocatalyst than on the TiO2 under natural light. The conjugated polymer played a promoting role in the photocatalytic degradation of MB. The calcination temperature had an important effect in degradation of dye and could be summarized as 260℃ 〉 300 ℃ 〉 340 ℃ 〉 220 ℃ 〉 180 ℃.     

Synthesis and Crystal Structure of a 1-D Copper（Ⅱ） Polymer with 1-Hexylimidazole and Oxalate

A novel Cu（Ⅱ） complex has been prepared by means of self-assembly of CuCl2, 1-hexylimidazole L and oxalic acid （H2OX） in the presence of triethylamine, and structurally characterized by X-ray diffraction analysis. In complex 1, 1-D polymer chains are formed through pentacoordinated Cu（Ⅱ）, oxalate and bridging chlorine atoms. In the crystal packing of 1, the imidazole ring head-to-tail π-πstacking interactions exist between 1-D polymer chains and extend the 1-D polymer chains into 2-D supramolecular layers. The fluorescence emission spectra of L and 1 were described.     

Synthesis and characterization of an acrylate polymer containing chlorine-1,3-dioxalane groups in side chains

Poly[2-（4-chlorophenyl）-1,3-dioxolan-4-yl]methyl acrylate,poly（CPhDMA）,was synthesized with radical polymerization process using 2,2′-azobisisobutyronitrile as radical initiator in 1,4-dioxane at 60℃.The structure of poly（CPhDMA） was confirmed by means of UV-Vis,FT-IR,¹H-NMR,and ¹³C-NMR spectral techniques.The molecular weight distribution values of the polymer were determined with gel permeation chromatography（GPC）.The number-average molecular weight（M_n）,weight-average molecular weight（M_W） and polydispersity index（PDI） values of poly（CPhDMA） were determined to be 10300,21600 and 2.097,respectively.The thermal degradation kinetics of the polymer was investigated by using TG/DTG-DTA and DSC analyses at different heating rates in dynamic nitrogen atmosphere.The apparent activation energy values obtained by Flynn-Wall-Ozawa and Friedman methods were found to be 91.68 and 85.23 kJ mol^-1,respectively,for thermal decomposition of poly（CPhDMA）.Also,the thermal degradation activation energy value of poly（CPhDMA） was calculated by using the Kissinger method based on the DTG,DTA and DSC data.Then the mechanism function of it was determined by master plots method.Finally,electrical and optical properties of poly（CPhDMA） were determined by four-point probe and UV-Vis techniques,respectively.     

Synthesis and Magnetic Properties of Fe（Ⅱ） and Nd（Ⅲ） Complexes of Poly（N-2-thiazolylacrylamide）

N-2-Thiazolylacrylamide （NTA） was polymerized by a radical route to obtain the polymer in good yield. The polymer with a pendent heterocyclic group is soluble in common organic solvents, which allow to prepare the corresponding metal complexes with higher loads easily. FTIR, ^1H NMR, elemental analysis, and energy-dispersive X-Ray spectroscopy （EDX） were applied to characterize these materials. The magnetic behavior of Fe（Ⅱ） and Nd（Ⅲ） complexes of poly（N-2-thiazolylacrylamide） was examined by a PPMS-9T magnetometer, exhibiting the characteristics of a soft ferromagnet. It is found that the Nd（Ⅲ） complex has an extremely high relative saturation magnetization of 35 emu/g.     

Synthesis,chiroptical properties of a helical polyacetylene derivative carrying urea moieties

A novel phenylacetylene derivative containing urea groups was synthesized and polymerized with a Rh catalyst to give the corresponding polymer, poly（1） with moderate number-average molecular weights. The poly（1） was soluble in toluene, CHCI3, CH2C12, THF, DMF, and DMSO, but insoluble in hexane, diethyl ether and MeOH. The specific rotation and circular dichroism （CD） spectroscopic studies revealed that poly（1） took predominantly one-handed helical structures. The presence of intramolecular hydrogen bonding was confirmed by liquid-state IR spectroscopy. The helicity of poly（1） could be tuned by temperature and anion. The helical conformation of the polymer was stable against Br but susceptible to F.     

Structural analysis of aggregates formed by a thermoresponsive homopolymer in dilute aqueous solutions

The aqueous solution of a thermoresponsive polymer, poly[2‐(2‐ethoxy) ethoxyethyl vinyl ether] poly(EOEOVE), contains a tiny amount of large polymer aggregates at low polymer concentrations far below the lower critical solution temperature (～40 °C). The molar mass M_w,slow, radius of gyration 〈S²〉, and hydrodynamic radius R_H,slow of the aggregating component of poly(EOEOVE) were obtained by simultaneous static and dynamic light scattering as functions of the polymer concentration and temperature, while the weight fraction w_slow of the component was estimated by size‐exclusion chromatography. The M_w,slow dependencies of 〈S²〉 and R_H,slow, as well as the ratio 〈S²〉/R_H,slow, indicated that the poly(EOEOVE) aggregate takes a sparsely branched polymer‐like conformation. We have analyzed the structure of the aggregate, using the branched polymer model of random type. The M_w,slow dependence of 〈S²〉 obtained was favorably compared with this model with reasonable structural parameters. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1179–1187, 2006     

Efficient π‐conjugated interrupted host polymer by metal‐free polymerization for blue/green phosphorescent light‐emitting diodes

A new aromatic host polymer poly{[1,4‐bis(9‐decylcarbazole‐3‐yl)‐2,3,5,6‐tetrafluorobenzene‐3,3′‐diyl]‐alt‐[N‐methylisatin‐2‐one‐3,3‐diyl]} (PICzFB) containing carbazole–tetrafluorinebeneze–carbazole moiety in the π‐conjugated interrupted polymer backbone was synthesized by superacid‐catalyzed metal‐free polyhydroxyalkylation. The resulted copolymer PICzFB showed a comparatively wide band gap up to 3.32 eV and high triplet energy (E_T) of 2.73 eV due to confined conjugation by the δ? C bond interrupted polymer backbone. Blue and green light‐emitting devices with PICzFB as host, FIrpic and Ir(mppy)₃ as phosphorescent dopants showed the maximum luminous efficiencies of 5.0 and 27.6 cd/A, respectively. The results suggested that the strategy of incorporating bipolar unit into the π‐conjugated interrupted polymer backbone can be a promising approach to obtain host polymer with high triplet level for solution‐processed blue and green phosphorescent polymer light‐emitting diodes. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1037–1046     

Length scale effect of PCL-PB-PCL on the light scattering and dynamics of network

The effect of length scale of triblock oil-soluble polymer (poly (ε-caprolactone)–poly butadiene-poly (ε-caprolactone)) (PCL-PB-PCL) on the properties of a water-in-oil (W/O) droplet microemulsion (R ~ 5.5 nm) has been studied as a function of the amount of added telechelic polymer. Small-angle X-ray scattering (SAXS) measurements show that the size of the droplets is not affected by the polymer addition but it induces attractive interactions at low concentration and repulsive ones at high polymer content. Measurements of the diffusion coefficient by dynamic light scattering (DLS) show different relaxations in mixed systems. The fast diffusion coefficient increases with increase in polymer concentration. At higher polymer content, the network formation leads to an additional slow relaxation mode in DLS that can be related to the formation of clusters of microemulsion droplets interconnected by the polymer. The collective diffusion of slow relaxations decreases with increase of polymer concentrations.     

Heterogeneities in Polymer Structural and Dynamic Properties in Graphene and Graphene Oxide Nanocomposites: Molecular Dynamics Simulations

The effect of graphene (G) and graphene oxide (GO), used as the nanofiller in polymer nanocomposites (NC), on the structural and dynamic properties of polymer chains, has been studied by means of molecular dynamics (MD) simulations. Two polymers, i.e., poly(propylene) and poly(vinyl alcohol), are employed as matrices to cover a wider range of polymer–filler interactions. The local structural properties, e.g., density profile, average R _g, and end‐to‐end distance as well as dynamic properties, e.g., estimated translational and orientational relaxation times, of polymer chains are studied. In addition, the interaction energies are estimated between polymers and nanofillers for different hybrid systems using MD pullout simulations. Strong heterogeneities in polymer structural and dynamic properties have been observed such that chains are more oriented and exhibit slower dynamics in the vicinity of the nanofillers (G and GO) as compared to bulk. It is also found that the orientation of polymer chains at the interface is more influenced by the nanofiller in such a way that the more oriented polymer chains are observed in G‐based NC for both polymers. However, the immobilization of polymer chains at the interface proves to be very much dependent on the polymer–filler interactions.

     

Synthesis and fabrication of highly functionalized Jeffamine antimicrobial polymeric coating

A simple, robust, and eco‐friendly technique for the fabrication of functionalized Jeffamine polymer in an aqueous medium is developed. The polymer is prepared by post polymerization modification of Jeffamine ED‐2003 of molecular weight 2000. The structure of the modified polymer was studied in detail using FTIR and NMR (¹H and ¹³C NMR) spectroscopic methods. The thermal properties and degradation of the polymer were examined by DSC and TGA techniques. The polymer exhibited glass transition temperature (T_g) at 115°C. The functionalized polymeric compound showed good antimicrobial activity against gram‐negative bacterium Escherichia coli, a tubercular variant Mycobacterium smegmatis, and gram‐positive bacterium Staphylococcus aureus with a zone of inhibition of 6 to 12, 9, and 5 to 9 mm diameter, respectively. The compound also showed good activity against the fungus, Candida albicans, with a zone of inhibition of 6 to 11 mm diameter. The morphology of the polymer films and interaction of the microbes with functionalized Jeffamine polymer were investigated by using scanning electron microscopy (SEM).     

Continuous Production of Functionalized Polymer Particles Employing the Phase Separation in Polymer Blend Films

This study reports a continuous prepartion of spherical or hemispherical polymer particles simply utilizing the phase separation in polymer blend films during the coating process. We took an advantage of the strong phase separation between a water‐soluble crystalline polymer as a matrix and hydrophobic polymers as minor components. We demonstrated the prepartion of water‐soluble polystyrene (PS) particles, nitrilotriacetic acid (NTA)‐functionalized PS particles for protein separation, and semiconducting poly(3‐hexylthiophene) (P3HT) particles. The sizes of the particles could be controlled by adjusting the film thickness and weight fraction of the minor component polymers in the blend film. It provides a simple facile way to prepare polymer particles in a continous process.

     

光敏性双亲共聚物在水溶液中的胶束化行为

通过ε-己内酯改性丙烯酸酯(FAa，n=1～4)与肉桂酰氯间的酰化反应合成了一系列光敏性大单体(FAaC)，与甲基丙烯酸(MAA)在溶液中进行自由基聚合，制备了具有光敏性的双素无规共聚物(PMFAaC)。将PMFAaC在选择性溶剂中进行自组装，可以形成纳米结构的聚合物。用动态激光光散射(DLS)研究了聚合物胶束的溶液行为，同时考察了单体含量、聚合物终浓度、聚合物侧链长、pH值、离子强度及温度等因素对胶束粒径的影响。实验结果表明，PMFAaC在选择性溶剂中可自组装成胶束，其粒径及其分布对单体含量、聚合物终浓度、聚合物侧链长、pH值、离子强度等有一定的依赖性，而对温度无依赖性。进一步用紫外光使肉桂酰基发生交联反应。从而制备得到核交联且稳定的纳米胶束。用DIS表征发现交联后的胶束粒径较交联前的小。     

White Polymer Light‐Emitting Diodes Based on Star‐Shaped Polymers with an Orange Dendritic Phosphorescent Core

A series of new star‐shaped polymers with a triphenylamine‐based iridium(III) dendritic complex as the orange‐emitting core and poly(9,9‐dihexylfluorene) (PFH) chains as the blue‐emitting arms is developed towards white polymer light‐emitting diodes (WPLEDs). By fine‐tuning the content of the orange phosphor, partial energy transfer and charge trapping from the blue backbone to the orange core is realized to achieve white light emission. Single‐layer WPLEDs with the configuration of ITO (indium‐tin oxide)/poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS)/polymer/CsF/Al exhibit a maximum current efficiency of 1.69 cd A⁻¹ and CIE coordinates of (0.35, 0.33), which is very close to the pure white‐light point of (0.33, 0.33). To the best of our knowledge, this is the first report on star‐shaped white‐emitting single polymers that simultaneously consist of fluorescent and phosphorescent species.

     

Investigation of polymer crystallization kinetics with time dependent light attenuation measurements

Results obtained for samples of syndiotactic polypropylene and poly(ethylene-co-octene) demonstrated the usefulness of light attenuation measurements in investigations of polymer crystallization. The earlier stages with separated growing spherulites fall in the range of Rayleigh–Debye–Gans scattering. Known relationships describing the dependence of the linear attenuation coefficient on the radius and the index of refraction of a spherulite can be applied in evaluations. The sensitivity of attenuation measurements is much higher than that of conventional tools.     

Ion imprinted polymer particles: synthesis, characterization and dysprosium ion uptake properties suitable for analytical applications

Dysprosium(III) ion imprinted polymer particles were prepared by the copolymerization of styrene monomers and a crosslinking agent divinylbenzene in the presence of dysprosium(III)-5,7-dichloroquinoline-8-ol-4-vinyl pyridine ternary complex wherein dysprosium(III) ion is the imprint ion and is used to form the imprinted polymer. The dysprosium(III) ion was removed from polymer particles by leaching with 1:1 HCl which leaves a cavity in the polymer particles. The polymer particles both prior to and after leaching have been characterized by IR, TGA, DTA and XRD studies. The leached particles selectively preconcentrated dysprosium ion from dilute aqueous solutions as determined spectrophotometrically using Arsenazo-I as reagent. The optimum pH value for quantitative enrichment is 6-9 and desorption can be achieved by using 25 ml of 1 mol/l of HCl. The retention capacity of the polymer particles was found to be 40.15 mg/g, which is much higher than MIPs prepared by other imprinting techniques. The dysprosium ion imprinting polymer gave 40 times higher distribution ratio for dysprosium ion compared to blank polymer. More significantly the selectivity coefficients of dysprosium compared to other lanthanides results in enhancement by 60-180-fold. The separation factors with respect to other selected lanthanides were also compared with liquid-liquid extractive separation using di-2-ethylhexyl phosphoric acid (D2EHPA) as extractant. The selectivity of dysprosium ion imprinting polymer (IIP) particles for dysprosium over yttrium is much higher and comparable in case of Nd and Lu when compared to conventional extractant such as D2EHPA in liquid-liquid extraction (LLE). Five replicate determinations of 50 μg of dysprosium present in 250 ml of sample gave a mean absorbance of 0.150 with a relative standard deviation of 2.42%. The detection limit corresponding to three times the standard deviation of the blank was found to be 2 μg/250 ml.