离子液体中NaHSO4催化芳香醛与1,3-环己二酮的缩合反应

以NaHSO₄为催化剂, 在离子液体1-丁基-3-甲基咪唑四氟硼酸盐([bmim]BF₄)介质中, 由芳香醛与1,3-环己二酮衍生物制备了9-芳基-2,3,4,5,6,7-六氢-2H-氧杂蒽-1,8-二酮衍生物. 在沸水浴中反应1～2 h, 产率达81.2%～93.0%. 该方法反应时间短, 产率高, 催化剂价廉易得, 而且对环境友好.     

离子液体促进四氟硼酸铜催化芳醛和乙酸酐合成1,1-二乙酸酯

在室温条件下, 离子液体1-正丁基-3-甲基六氟磷酸盐([bmim]PF₆)能促进四氟硼酸铜催化一系列芳醛和乙酸酐反应, 以83%～97%的产率生成相应的1,1-二乙酸酯. 在离子液体[bmim]PF₆存在情况下, 催化剂活性远远高于无离子液体存在下的活性. 催化剂用量仅需 0.2 mol%就能使反应顺利进行, 远远少于文献报道的其它催化剂的用量, 反应在3～20 min内完成. 实验结果表明该法催化剂用量少、产率高、反应时间短、离子液体可重复使用、对环境友好.     

离子液体[bmim][BF4]对联苯甲酰光化学反应影响的瞬态吸收光谱

利用纳秒级激光光解瞬态吸收光谱研究了联苯甲酰(BZ)在离子液体1-丁基-3-甲基咪唑四氟硼酸盐([bmim][BF₄])与乙腈(MeCN)混合体系中的光化学反应行为. 考察了探针分子BZ存在下[bmim][BF₄]/MeCN比例对体系中化学反应动力学的影响. 实验发现: 在N₂饱和条件下, BZ溶液经激光辐照后产生的激发三线态³BZ^*遵循一级反应动力学规律衰减. 离子液体(IL)相对比例增加对³BZ^*瞬态吸收峰的位置和强度没有产生明显影响. 但离子液体体积分数V_IL的变化对[bmim][BF₄]/MeCN混合溶剂中光诱导电子转移的影响却非常显著, 总体上电子转移产生的自由基的表观生成速率常数k_gr随[bmim][BF₄]的V_IL增大而减小. 在[bmim]BF₄]比例足够大的情况下, ³BZ^*与三乙胺或四甲基对苯二胺之间的电子转移被抑制.     

碱性离子液体催化的5-芳亚甲基-2-硫代-4-噻唑酮衍生物的合成

以碱性离子液体[bmim]OH为溶剂和催化剂, 由芳香醛与2-硫代-4-噻唑酮在沸水浴中反应30～75 min, 以89%～ 96%的产率制备了5-芳亚甲基-2-硫代-4-噻唑酮. 结果表明该方法简便易行, 产率较高, 所使用的离子液体对环境友好, 并可循环使用. 产物结构经¹H NMR和IR确证.     

室温离子液体促进的5-亚芳基巴比妥酸衍生物的合成

在室温离子液体1-丁基-3-甲基咪唑四氟硼酸盐([bmim]BF₄)存在下, 采用室温研磨和微波辐射的方法, 由芳香醛和巴比妥酸或硫代巴比妥酸经Knoevenagel缩合反应, 制备了相应的5-亚芳基巴比妥酸或5-亚芳烃基硫代巴比妥酸衍生物. 在室温研磨条件下反应2 h, 产率为78%～96%, 在微波辐射功率为160 W时反应20 s, 产率为82%～98%, 产物结构经¹H NMR确证.     

离子液体中5,5-二甲基-1,3-环己二酮与N-芳亚甲基芳胺反应合成 吖啶衍生物

在离子液体[bmim]Br中, 5,5-二甲基-1,3-环己二酮与N-芳亚甲基芳胺反应合成了一系列四氢吖啶-1,8-二酮衍生物, 该反应具有适应性广、产率高、污染少、环境友好等优点.     

离子液体介质中FeCl3•6H2O催化下芳香醛与5,5-二甲基-1,3-环己二酮的缩合反应

考察了在离子液体1-正丁基-3-甲基咪唑四氟硼酸盐([bmim][BF₄])介质中, 芳香醛与5,5-二甲基-1,3-环己二酮的缩合反应. 实验结果表明, 在催化量的FeCl₃•6H₂O存在下, 该反应可高产率地生成氧杂蒽二酮类化合物3; 而在TMSCl/FeCl₃•6H₂O复合催化体系的催化下, 则得到氧杂蒽二酮类化合物的开环衍生物4, 反应具有非常好的选择性. 该论文提供的方法操作简单、产率高、选择性好而且对环境友好. 在反应结束后, 所用催化剂及离子液体都很容易回收, 并能有效重复使用.     

在离子液体中一步法合成吡唑[5,4-b]-γ-吡喃衍生物

芳醛、丙二腈与4,5-二氢-3-甲基-5-氧代-1-苯基吡唑在离子液体[bmim][BF₄]中反应, 合成了2-氨基-4-芳基-3-氰基-5-甲基-7-苯基吡唑[5,4-b]-γ-吡喃衍生物, 该法快速、高效, 是一种洁净的合成方法. 产物的结构通过红外光谱、核磁共振氢谱和元素分析进行表征.     

分子模拟研究气体在室温离子液体中的溶解度

在作者先前建立的分子力场基础上, 采用Widom粒子插入法预测了CO₂、N₂、O₂、Ar及CH₄等5种气体在多种咪唑类离子液体中的溶解度, 包括2种侧链长度的阳离子和3种阴离子. 首先考察了256个离子对组成的体系中溶质分子插入次数对计算结果的影响, 在此基础上计算了不同温度下气体在1-丁基-3-甲基咪唑的四氟化硼盐([bmim][BF₄])和六氟化磷盐([bmim][PF₆])中的溶解度. 计算结果正确反映了CO₂气体溶解度的变化趋势, 在[bmim][BF₄]中溶解度的模拟结果与实验值符合很好, 且明显优于Pádua等的模拟结果；在[bmim][PF₆]中的溶解度较实验值偏高, 精度与文献模拟结果相当；并预测了较高温度下CO₂气体在[bmim][BF₄]和[bmim][PF₆]中的溶解度. 计算结果也正确地反映了5种气体在[bmim][PF₆]中溶解度实验值的相对大小. 另外考察了常温下几种气体在不同室温离子液体中的溶解度, 模拟结果表明气体在含有较长碳链和双-三氟甲基磺酰胺阴离子(Tf₂N^－)的离子液体中溶解度较大.     

无溶剂条件下离子液体[Hnmp]HSO4催化一锅法合成2 -氨基苯并噻唑-芳甲基-2-萘酚

以离子液体[Hnmp]HSO₄为催化剂, 在无溶剂条件下催化芳香醛、2-氨基苯并噻唑和2-萘酚合成一系列的2 -氨基苯并噻唑-芳甲基-2-萘酚. 该方法条件温和, 反应时间短, 产率高和对环境友好. 此外催化剂可以方便地回收, 且循环使用四次其催化活性并没有显著降低. 目标产物经过了¹H NMR, IR, MS和元素分析确证.     

Reduction of Aldehydes and Ketones with Potassium Borohydride as Reductant

A series of aldehydes and ketones were reduced by potassium borohydride in an ionic liquid/water ([bmim]PF6/H2O) biphasic system to afford corresponding alcohol with high purity in excellent yields. The ionic liquid/water biphasic system could promote the chemoselectivity and the substituents such as nitro group and chlorine remained intact. Aromatic ketones were not as active as aromatic aldhydes and cyclic ketones owing to their higher steric hindrance. The ionic liquid could be recycled and reused. This protocol has notable advantages of no need of phase transfer catalyst and organic solvents, mild conditions, simple operation, short reaction time, ease work-up, high yields and recycling of the ionic liquid.     

Efficient one-pot syntheses of 2H-indazolo[2,1-b] phthalazine-triones by catalytic H2SO4 in water-ethanol or ionic liquid

Sulfuric acid-catalyzed, three-component, one-pot condensation of phthalhydrazide, aromatic aldehydes and 1,3-dicarbonyl compounds has been reported for the synthesis of a series of 2H-indazolo[2,1-b] phthalazine-triones in water-ethanol or in ionic liquid. The protocol proves to be efficient and environmentally benign in terms of high yields, low reaction times, ease of recovery, and reusability of reaction medium (ionic liquid).     

Green protocol for conjugate addition of thiols to alpha,beta-unsaturated ketones using a [bmim]PF6/H2O system

Alpha,beta-unsaturated ketones undergo conjugate addition rapidly with thiols in a hydrophobic ionic liquid [bmim]PF(6)/H(2)O solvent system (2:1) in the absence of any acid catalyst to afford the corresponding Michael adducts in high to quantitative yields with excellent 1,4-selectivity under mild and neutral conditions. The enones show enhanced reactivity in ionic liquids, thereby reducing reaction times and improving the yields significantly. The use of ionic liquids helps to avoid the use of either acid or base catalysts for this conversion. The recovered ionic liquid was reused four to five times with consistent activity.     

Preparation of ionic liquids bearing o-carborane anion via N,N′-dialkylimidazol-2-ylidene carbene

In the present study, a novel ionic liquid including o-carborane anion was prepared. After the carbene formation of 1-ethyl-3-methylimidazolium halide ([EMIm]⁺[X]⁻) by reaction with n-BuLi, the subsequent reaction with o-carborane afforded the desired ionic liquid in moderate yields. The structure of the ionic liquid was supported by ¹H NMR and ¹¹B NMR spectra.     

A Novel Ionic Liquid／water Biphasic System for the Preparation of Oximes

A variety of carbonyl compounds can be converted into oximes efficiently and conveniently in a novel ionic liquid/water bi-phasic system in the presence of sodium bicarbonate at ambient temperature. The ionic liquid 1-butyl-3-methyl imidazolium hexafluorophosphate [bmim]PF6 is immiscible with water or diethyl ether and can be easily recycled for reuse without noticeable droping in activity after separation of the products. The protocol is rapid, the yields are excellent, the method is simple and the ionic liquid can be reused.     

Ionic liquid promoted one-pot synthesis of 3-aminoimidazo[1,2-a]pyridines

3-Aminoimidazo[1,2-a]pyridines have been synthesized in good to excellent yields in the presence of the ionic liquid 1-butyl-3-methylimidazolium bromide [bmim]Br, the reaction workup is simple and the ionic liquid can be easily separated from the product and reused.     

Stereoselective Michael Addition of Carbonyl Compounds to ( E )-β-Nitrostyrene Catalysed by N -Toluensulfonyl-l -proline Amide in Ionic Liquids

Summary. N-Toluensulfonyl-l-prolin amide was tested as catalyst in the enantioselective Michael addition of carbonyl compounds to (E)-β-nitrostyrene in nine ionic liquids under different reaction conditions. The reaction rates and enantioselectivities were strongly dependent on the ionic liquids. Change of enantioselectivity was observed too and it is attributed to both the cation and the anion of ionic liquid. The best yields (up to 98%) and enantioselectivity (70% ee) of product were obtained in a basic ionic liquid [bmim]BF₄ at room temperature.     

Stereoselective Michael Addition of Carbonyl Compounds to ( E )-β-Nitrostyrene Catalysed by N -Toluensulfonyl-l -proline Amide in Ionic Liquids

N-Toluensulfonyl-l-prolin amide was tested as catalyst in the enantioselective Michael addition of carbonyl compounds to (E)-β-nitrostyrene in nine ionic liquids under different reaction conditions. The reaction rates and enantioselectivities were strongly dependent on the ionic liquids. Change of enantioselectivity was observed too and it is attributed to both the cation and the anion of ionic liquid. The best yields (up to 98%) and enantioselectivity (70% ee) of product were obtained in a basic ionic liquid [bmim]BF₄ at room temperature.     

One-step Synthesis of 3,4-Dihydrobenzimidazo[2,1- b ]quinazolin-1(2 H )-ones in an Ionic Liquid

A novel class of 3,4-dihydrobenzimidazo[2,1-b]quinazolin-1(2H)-ones was synthesized in very short reaction times with good yields in the presence of 3-butyl-1-methyl imidazolium bromide as a room temperature ionic liquid at 120°C. The ionic liquid can be recycled for subsequent reactions without any loss of efficiency.     

Green approach for the conversion of olefins into vic-halohydrins using N-halosuccinimides in ionic liquids

Alkenes undergo smooth bromo- and iodohydroxylation with N-bromo- and N-iodosuccinimides/water, respectively, using the air and moisture stable ionic liquid [bmim]BF₄ as a novel recyclable reaction medium in high to quantitative yields. N-Halosuccinimides show enhanced reactivity in ionic liquids thereby reducing the reaction times and improving the yields considerably.