水相中CdTe纳米晶的制备及其光学性质

用不同稳定剂(巯基乙酸(TGA)、巯基丙酸(MPA)、L-半胱氨酸(L-Cys)、3-巯基-1,2-丙二醇(TG))在水相中制备了CdTe纳米晶, 并用透射电子显微镜(TEM)、X射线光电子能谱(XPS)和X射线粉末衍射(XRD)等技术对其进行了表征. 研究了不同水相合成条件对CdTe纳米晶光学性质的影响, 结果表明, n(Cd):n(Te)、溶液pH值、回流时间以及稳定剂的性质, 对纳米晶的光学性质具有显著影响. 制得的CdTe纳米晶发射峰窄且对称(半高全宽达38 nm), 用不同稳定剂制备的纳米晶发光量子效率有所不同, 用不同的激发波长对纳米晶进行激发时, 发射峰并未表现出明显的移动.     

通过静电相互作用制备CdTe/SiO2纳米复合物

以四乙氧基硅烷(TEOS)为原料,在乙醇相中制备了尺寸为80nmSiO₂纳米粒子,用3-氨基丙基三乙氧基硅烷对SiO₂纳米粒子进行了氨基化.以巯基乙酸为配体,在水相中合成了CdTe纳米晶.通过静电相互作用,CdTe纳米晶被吸附到氨基化的二氧化硅球的表面上.研究了两种粒子复合后引起的CdTe纳米晶发光光谱的变化.     

水合肼还原二氧化碲水相合成CdTe量子点

以巯基乙酸为稳定剂, 氯化镉为镉源, 二氧化碲为碲源, 水合肼为还原剂, 一步合成了CdTe量子点. 研究了反应时间、 碲与镉的摩尔比及巯基乙酸与镉的摩尔比等实验条件对CdTe量子点生长过程的影响. 采用荧光光谱、 X射线粉末衍射和透射电子显微镜等对量子点的性能进行了表征. 结果表明, 反应时间及反应物的相对用量对量子点的生长和荧光光谱有明显影响, 所得CdTe量子点具有立方晶型, 发光颜色从绿色到红色连续可调, 荧光量子产率可达26%.     

利用水相合成的CdTe纳米晶构建超晶格结构研究--纳米晶聚集体的调控

用巯基丙酸作稳定剂,在水溶液中制备了CdTe纳米晶.通过加入Cd2+、聚丙烯酸(PAA)以及长期放置分别得到了CdTe纳米晶的聚集体,改变Cd2+浓度或PAA加入量可以调控聚集体的尺寸.过量的Cd2+加速了聚集体的形成,通过与纳米晶表面羧酸根的静电相互作用,Cd2+成为连接不同CdTe纳米晶的“桥梁”.PAA链上大量的羧基与CdTe纳米晶有较强的配位相互作用,可以诱导纳米晶聚集.新制CdTe纳米晶在长期放置时,表面的羧基与Cd2+的相互作用导致纳米晶逐渐聚集.在聚集过程中纳米晶表面结构得到改善,并引起荧光增强.这些结果表明通过控制各种聚集条件,可以得到不同尺寸的聚集体.     

表面修饰CdTe量子点的合成及其光学特性

在水相中合成高发光性能的CdTe量子点,研究以巯基乙酸(TGA)为稳定剂对CdTe表面进行修饰,制备在水中分散性良好的纳米晶,通过对CdTe量子点合成反应条件的摸索,掌握了其合成的反应规律.同时用紫外分光光度计、荧光分光光度计和透射电子显微镜对其进行了表征.结果表明,回流时间、n(Cd²⁺):n(HTe^-)、反应物浓度、TGA用量、反应体系pH值,对纳米晶的光学性质具有显著影响.回流2 h制得的CdTe纳米粒子直径约为5 nm,其发射峰窄且对称,表现出良好稳定的光学性质.     

CdTe纳米棒-过氧化氢化学发光体系的研究

在水相中合成了以巯基乙酸和L-半胱氨酸为稳定剂的CdTe纳米棒。研究发现在碱性溶液中H2O2能直接氧化CdTe纳米棒产生强烈的化学发光,化学发光的强度与CdTe纳米棒尺寸大小相关,且一些表面活性剂能强烈敏化该反应。     

CdTe荧光量子点与苯胺之间相互作用的研究

以巯基乙酸为稳定剂在水相中合成了CdTe荧光量子点,并使之与苯胺(Aniline)耦联.通过红外光谱分析,证实CdTe荧光量子点同Aniline的耦合主要是通过量子点周围巯基乙酸的—COOH与苯胺的—NH2形成的氢键实现的.将CdTe-苯胺、CdTe-丙氨酸(Alanine)耦合物荧光光谱的强度进行对比,发现苯环的存在可以极大地增强耦合物的荧光强度.     

碲化镉/马来酰亚胺三嗪纳米杂化材料的制备及其光性能研究

利用低温水相法, 以巯基丙酸(MPA)作为稳定剂制备了碲化镉(CdTe)量子点, 通过马来酰亚胺三嗪(TMT)中的三嗪基团与CdTe量子点表面富含的羧基之间的氢键作用, 得到了分散性能优良的纳米杂化材料. 利用紫外-可见吸收光谱、荧光光谱以及透射电子显微镜等手段对产物的光物理性质和形貌进行了表征. 结果表明, 马来酰亚胺三嗪与CdTe量子点杂化后, CdTe量子点的荧光发射峰有明显的蓝移, 在CdTe量子点和马来酰亚胺三嗪之间存在着能量转移, 并且纳米杂化材料的分散性也有明显的改善.     

CdTe纳米荧光探针的合成及其与DNA的相互作用

以巯基丙酸(RSH)为稳定剂,采用水相法合成了功能性CdTe纳米晶,并通过X射线衍射(XRD)和透射电镜(TEM)对其粒度和形貌进行表征。建立了一种以水溶性CdTe量子点作为荧光探针测定DNA的方法,当DNA浓度为0.2~40μmol.dm-3时,荧光强度与DNA浓度呈良好的线性关系,检测限为80nmol.dm-3,11次重复测定含有5.6μmol.dm-3的小牛胸ctDNA得到的相对标准偏差为3.4%。考察了CdTe量子点浓度、pH值、温度及作用时间等因素对DNA荧光强度的影响。研究发现CdTe纳米粒子与DNA之间存在强烈的相互作用,量子点的荧光猝灭与DNA浓度呈线性关系;作用机理研究表明,CdTe纳米粒子与DNA之间存在静电相互作用,且DNA对CdTe纳米粒子的猝灭为动态猝灭过程。     

高灵敏CdTe量子点探针的构建及与金属离子的作用

采用变性的牛血清白蛋白(dBSA)对水相合成的CdTe量子点进行修饰, 构建了高灵敏金属离子探针, 研究了其对重金属离子的检测性能并对机理进行了探讨. 通过优化反应条件, 合成了具有高量子产率的以巯基乙酸为稳定剂的水溶性CdTe量子点, 并采用变性的牛血清白蛋白分别对不同粒径的CdTe量子点进行修饰, 确定变性的牛血清白蛋白与不同粒径量子点之间的最佳比例. 在纯化变性的牛血清白蛋白修饰的量子点(dBSA-QDs)的基础上, 研究了该量子点与不同金属离子的作用. 结果表明, 量子点经修饰后, 其量子产率、 抗光漂白性及稳定性得到显著提高; 而且dBSA-QDs的荧光可被重金属离子有效猝灭, 与巯基乙酸稳定的量子点(TGA-QDs)相比, 检测灵敏度显著提高.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.