α‐Bis and α,ω‐tetrakis(4‐dimethylaminophenyl) functionalized polymers by atom transfer radical polymerization using 1,1‐bis[(4‐dimethylamino)phenyl]ethylene as tertiary diamine initiator precursor and functionalizing agent

The quantitative syntheses of α‐bis and α,ω‐tetrakis tertiary diamine functionalized polymers by atom transfer radical polymerization (ATRP) methods are described. A tertiary diamine functionalized 1,1‐diphenylethylene derivative, 1,1‐bis[(4‐dimethylamino)phenyl]ethylene (1), was evaluated as a unimolecular tertiary diamine functionalized initiator precursor as well as a functionalizing agent in ATRP reactions. The ATRP of styrene, initiated by a new tertiary diamine functionalized initiator adduct (2), affords the corresponding α‐bis(4‐dimethylaminophenyl) functionalized polystyrene (3). The tertiary diamine functionalized initiator adduct (2) was prepared in situ by the reaction of (1‐bromoethyl)benzene with 1,1‐bis[(4‐dimethylamino)phenyl]ethylene (1) in the presence of a copper (I) bromide/2,2′‐bipyridyl catalyst system. The ATRP of styrene proceeded via a controlled free radical polymerization process to afford quantitative yields of the corresponding α‐bis(4‐dimethylaminophenyl) functionalized polystyrene derivative (3) with predictable number‐average molecular weight (M_n) and narrow molecular weight distribution (M_w/M_n) in a high initiator efficiency reaction. The polymerization process was monitored by gas chromatography analysis. Quantitative yields of α,ω‐tetrakis(4‐dimethylaminophenyl) functionalized polystyrene (4) were obtained by a new post ATRP chain end modification reaction of α‐bis(4‐dimethylaminophenyl) functionalized polystyrene (3) with excess 1,1‐bis[(4‐dimethylamino)phenyl]ethylene (1). The tertiary diamine functionalized initiator precursor 1,1‐bis[(4‐dimethylamino)phenyl]ethylene (1) and the different tertiary amine functionalized polymers were characterized by chromatography, spectroscopy and non‐aqueous titration measurements. Copyright © 2012 Society of Chemical Industry     

Cationic copolymers of α,β‐poly‐(N‐2‐hydroxyethyl)‐DL‐aspartamide (PHEA) and α,β‐polyasparthylhydrazide (PAHy): synthesis and characterization

In the present study the derivatization of two water‐soluble synthetic polymers, α,β‐poly(N‐2‐hydroxyethyl)‐DL ‐aspartamide (PHEA) and α,β‐polyasparthylhydrazide (PAHy), with glycidyltrimethylammonium chloride (GTA) is described. This reaction permits the introduction of positive charges in the macromolecular chains of PHEA and PAHy in order to make easier the electrostatic interaction with DNA. Different parameters affect the reaction of derivatization, such as GTA concentration and reaction time. PHEA reacts partially and slowly with GTA; on the contrary the reaction of PAHy with GTA is more rapid and extensive. The derivatization of PHEA and PAHy with GTA is a convenient method to introduce positive groups in their chains and it permits the preparation of interpolyelectrolyte complexes with DNA. © 2000 Society of Chemical Industry     

Highly Enantioselective Michael Addition of Cyclic 1,3‐Dicarbonyl Compounds to β,γ‐Unsaturated α‐Keto Esters

A highly enantioselective Michael addition of cyclic 1,3‐dicarbonyl compounds to β,γ‐unsaturated α‐keto esters catalyzed by amino acid‐derived thiourea‐tertiary‐amine catalysts is presented. Using 5 mol% of a novel tyrosine‐derived thiourea catalyst, a series of chiral coumarin derivatives were obtained in excellent yields (up to 99%) and with up to 96% ee under very mild conditions within a short reaction time.     

Poly‐α,β‐(3‐hydroxypropyl)‐DL‐aspartamide: A new drug carrier

Poly‐α,β‐(3‐hydroxypropyl)‐DL ‐aspartamide (PHPA) was synthesized by the ring‐open reaction of polysuccinimide (PSI) and 3‐hydroxypropylamine. The polymer was characterized by ¹H‐NMR, ¹³C‐NMR, FTIR, and GPC. Mark–Houwink coefficients were obtained from viscometry and GPC measurements, K = 5.53 × 10⁻³ and α = 0.78 in water. The acute toxicity of PHPA was examined and it revealed no death in ICR mice up to the dose treated of 15.3 kg/kg, and hematological parameters showed no significant difference between treated and control animals. The potential use of PHPA as a drug carrier was also investigated. In a typical case, a contraceptive drug, norethindrone (NET), was bonded to PHPA, and the drug sustained released as long as 120 days an in vitro test. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 2411–2417, 2000     

Atom‐transfer radical polymerization of methyl methacrylate with α,α′‐dichloroxylene/CuCl/N,N,N′,N″,N″‐pentamethyldiethylenetriamine initiation system under microwave irradiation

The atom‐transfer radical polymerization (ATRP) of methyl methacrylate (MMA), using α,α′‐dichloroxylene as initiator and CuCl/N,N,N′,N″,N″‐pentamethyldiethylenetriamine as catalyst was successfully carried out under microwave irradiation (MI). The polymerization of MMA under MI showed linear first‐order rate plots, a linear increase of the number‐average molecular weight with conversion, and low polydispersities, which indicated that the ATRP of MMA was controlled. Using the same experimental conditions, the apparent rate constant (k) under MI (k = 7.6 × 10^?4 s^?1) was higher than that under conventional heating (k = 5.3 × 10^?5 s^?1). © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2189–2195, 2004     

Ruthenium(II)‐Catalyzed Protocol for Preparation of Diverse α,β‐ and β,β‐Dihaloenones from Diazodicarbonyls

Efficient one‐step syntheses of α,β‐ and β,β‐dihaloenones were achieved by ruthenium(II)‐catalyzed reactions between cyclic or acyclic diazodicarbonyl compounds and oxalyl chloride or oxalyl bromide in moderate to good yields. This methodology offers several significant advantages, which include ease of handling, mild reaction conditions, one‐step reaction, and the use of an effective and non‐toxic catalyst. The synthesized compounds were further transformed into highly functionalized novel molecules bearing aromatic rings on the enone moiety using the Suzuki reaction.

     

Facile synthesis and characterization of star‐shaped polystyrene: self‐condensing atom transfer radical copolymerization of N‐[4‐(α‐bromoisobutyryloxy)phenyl]maleimide and styrene

BACKGROUND: Generation of stars around in situ formed cores provides a facile approach to star‐shaped polymers. Therefore the self‐condensing atom transfer radical copolymerization (SCATRCP) of N‐[4‐(α‐bromoisobutyryloxy)phenyl]maleimide (BiBPM) and a large excess of styrene (St) was investigated. RESULTS: BiBPM and St formed a charge transfer complex (CTC), which underwent the SCATRCP, leading to the branched core initiating the atom transfer radical polymerization of St, finally giving star‐shaped polystyrene (PS). Kinetic and structural study showed that a higher dosage of BiBPM resulted in an enhanced polymerization rate, a higher degree of branching and a larger number of short PS arms. Differential scanning calorimetry suggested that the glass transition temperature of the star‐shaped PS decreased with molecular weight. Melt rheometry showed that even a slightly branched architecture of the PS led to a significantly lower viscosity; both the melt flow index and the activation energy increased with the degree of branching. CONCLUSION: Due to the preferential consumption of BiBPM and formation of a CTC, even a very low dosage of BiBPM could lead to star‐shaped PS, which, in comparison with linear analogues, could possess much better melt fluidity. Copyright © 2008 Society of Chemical Industry     

Synthesis and characterization of novel polyaspartimides derived from 2,2′‐dimethyl‐4,4′‐bis(4‐maleimidophenoxy)biphenyl and various diamines

A novel bismaleimide, 2,2′‐dimethyl‐4,4′‐bis(4‐maleimidophenoxy)biphenyl, containing noncoplanar 2,2′‐dimethylbiphenylene and flexible ether units in the polymer backbone was synthesized from 2,2′‐dimethyl‐4,4′‐bis(4‐aminophenoxy)biphenyl with maleic anhydride. The bismaleimide was reacted with 11 diamines using m‐cresol as a solvent and glacial acetic acid as a catalyst to produce novel polyaspartimides. Polymers were identified by elemental analysis and infrared spectroscopy, and characterized by solubility test, X‐ray diffraction, and thermal analysis (differential scanning calorimetry and thermogravimetric analysis). The inherent viscosities of the polymers varied from 0.22 to 0.48 dL g⁻¹ in concentration of 1.0 g dL⁻¹ of N,N‐dimethylformamide. All polymers are soluble in N‐methyl‐2‐pyrrolidone, N,N‐dimethylacetamide, N,N‐dimethylformamide, dimethylsulfoxide, pyridine, m‐cresol, and tetrahydrofuran. The polymers, except PASI‐4, had moderate glass transition temperature in the range of 188°–226°C and good thermo‐oxidative stability, losing 10% mass in the range of 375°–426°C in air and 357°–415°C in nitrogen. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 73: 279–286, 1999     

Copolymerization of styrene with an α‐olefin via atom transfer radical polymerization

This investigation reports the preparation of styrene–α‐olefinic random copolymers, using 1‐octene as an α‐olefin, via atom transfer radical polymerization. Atom transfer radical copolymerization of styrene with 1‐octene was successfully carried out using phenylethyl bromide as initiator and CuBr as catalyst in combination with N, N, N′, N″, N″‐pentamethyldiethylenetriamine as ligand. The copolymers had controlled molecular weight, narrow dispersity and well‐defined end groups with significant 1‐octene incorporation in the polymer. Incorporation of 1‐octene in the copolymers was confirmed using ¹H NMR and matrix‐assisted laser desorption ionization time‐of‐flight mass spectroscopy. An increase in 1‐octene content in the monomer feed led to an increase in the level of incorporation of the α‐olefin in the copolymer. An increase in the concentration of 1‐octene led to a decrease in the rate of polymerization and an increase in dispersity. The glass transition temperature of the copolymer gradually decreased as the incorporation of 1‐octene increased. Copyright © 2011 Society of Chemical Industry     

Organosoluble and light‐colored fluorinated polyimides based on 1,1‐bis[4‐(4‐amino‐2‐trifluoromethylphenoxy)phenyl]‐1‐phenylethane and various aromatic dianhydrides

To investigate the CF₃ group affecting the coloration and solubility of polyimides (PI), a novel fluorinated diamine 1,1‐bis[4‐(4‐amino‐2‐ trifluoromethylphenoxy)phenyl]‐1‐phenylethane (2) was prepared from 1,1‐ bis(4‐hydrophenyl)‐1‐phenylethan and 2‐chloro‐5‐nitrobenzotrifluoride. A series of light‐colored and soluble PI 5 were synthesized from 2 and various aromatic dianhydrides 3a–f using a standard two‐stage process with thermal 5a– f(H) and chemical 5a–f(C) imidization of poly(amic acid). The 5 series had inherent viscosities ranging from 0.55 to 0.98 dL/g. Most of 5a–f(H) were soluble in amide‐type solvents, such as N‐methyl‐2‐pyrrolidone (NMP), N,N‐ dimethylacetamide (DMAc), and N,N‐dimethylformamide (DMF), and even soluble in less polar solvents, such as m‐Cresol, Py, Dioxane, THF, and CH₂Cl₂, and the 5(C) series was soluble in all solvents. The GPC data of the 5a–f(C) indicated that the Mn and Mw values were in the range of 5.5–8.7 × 10⁴ and 8.5–10.6 × 10⁴, respectively, and the polydispersity index (PDI) Mw /Mn values were 1.2–1.5. The PI 5 series had excellent mechanical properties. The glass transition temperatures of the 5 series were in the range of 232–276°C, and the 10% weight loss temperatures were at 505–548 °C in nitrogen and 508–532 °C in air, respectively. They left more than 56% char yield at 800°C in nitrogen. These films had cutoff wavelengths between 356.5–411.5 nm, the b* values ranged from 5.0–71.1, the dielectric constants, were 3.11–3.43 (1MHz) and the moisture absorptions were in the range of 011–0.40%. Comparing 5 containing the analogous PI 6 series based on 1,1‐bis[4‐(4‐aminophenoxy)phenyl]‐1‐ phenylethane (BAPPE), the 5 series with the CF₃ group showed lower color intensity, dielectric constants, and better solubility. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 2399–2412, 2005     

Efficient Synthesis of β,γ‐Alkynyl α‐Amino Acid Derivatives by Ag(I)‐Catalyzed Alkynylation of α‐Imino Esters

The first catalytic synthesis of β,γ‐alkynyl α‐amino acid derivatives was achieved by direct addition of terminal alkynes to α‐imino esters in the presence of an Ag(I) salt under mild reaction conditions.     

Michael Reaction of Nitroalkanes with β‐Nitroacrylates under a Solid Promoter: Advanced Regio‐ and Diastereoselective Synthesis of Nitro‐Functionalized α,β‐Unsaturated Esters and 1,3‐Butadiene‐2‐carboxylates

A new class of nitro‐functionalized α,β‐unsaturated esters has been prepared by a regio‐ and diastereoselective Michael addition of nitroalkanes to β‐nitroacrylates, performed at room temperature, under carbonate on polymer as promoter, and in the presence of ethyl acetate as eco‐friendly solvent. Moreover, by the modular choice of the reaction conditions the method allows the synthesis of 1,3‐butadiene‐2‐carboxylates.     

Crystallography and Structure–Property Relationships of 2,2″,4,4′,4″,6,6′,6″‐Octanitro‐1,1′ : 3′,1″‐Terphenyl (ONT)

An X‐ray crystallographic study of 2,2″,4,4′,4″,6,6′,6″‐octanitro‐1,1′ : 3′,1″‐terphenyl (ONT) has been carried out. The dihedral angles between benzene rings vary from 84.9° to 89.4°. Nonbinding interatomic distances of oxygen atoms inside all the nitro groups are shorter than the intermolecular contact radii for oxygen. On the basis of the DFT B3LYP/6‐31(d, p) method it was found that the difference between the X‐ray structure in the solid phase and DFT result for the gas phase is 98 kJ mol⁻¹, and the bearer of the highest initiation reactivity of the ONT molecule in the solid phase should be the nitro group at 4″‐position, in contrast to those at 4′‐ or 6′‐position that play this role in the isolated molecule. It has been stated that the nitro groups at the reaction centers of the ONT molecule are relatively well specified by their ¹⁵N NMR chemical shifts.     

Immobilization of active α‐chymotrypsin on RF‐plasma‐functionalized polymer surfaces

Various polymeric surfaces (polyester, polyethylene, polystyrene) were functionalized under oxygen and dichlorosilane‐RF‐cold‐plasma environments and were employed as substrates for further in situ derivatization reactions and immobilization of α‐Chymotrypsin. The nature and morphology of the derivatized substrates and the substrates with immobilized enzymes were analyzed using survey and high‐resolution X‐ray photoelectron spectroscopy, attenuated total reflectance‐fourier transform infrared (ATR‐FTIR), laser desorption fourier transform ion cyclotron resonance mass spectrometry, chemical derivatization, and atomic force microscopy (AFM) techniques. It was demonstrated that the tacticity of the polystyrene substrate did not notably influence the activity of the immobilized enzyme, however, spacer molecules intercalated between the polymeric substrates (e.g., polyethylene) and the enzyme significantly increased the enzyme activity (comparable with that of the free enzyme). Computer‐aided conformational modeling of the substrate‐spacer systems indicated that the longer the spacer chain, the greater the mobility of the enzyme. It is suggested that the greater mobility of the enzyme molecules is responsible for the enhanced activity. It has also been shown that the stability of the immobilized enzyme systems was good; they retained their activity during several washing/assay cycles. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 78: 1783–1796, 2000     

Three‐Component Reactions of 2‐Alkynylbenzaldoximes and α,β‐Unsaturated Carbonyl Compounds with Bromine or Iodine Monochloride

The three‐component reaction of 2‐alkynylbenzaldoximes and α,β‐unsaturated carbonyl compounds with bromine or iodine monochloride is described, which generates the unexpected 2‐(4‐haloisoquinolin‐1‐yl)ethanol derivatives in good to excellent yields.     

A Convenient Procedure for the Synthesis of Acetals from α‐Halo Ketones

A study for determining the scope and limitations of a procedure for synthesising ethylene acetals from haloketones is presented. The method uses 1,2‐bis(trimethylsilyloxy)ethane, BTSE, as reagent and Nafion^®‐TMS as catalyst. Two procedures have been tested: (A) stoichiometric amounts of the haloketone and BTSE and a catalytic amount of Nafion^®‐TMS were heated to reflux in chloroform solution, and (B) stoichiometric amounts of the reactants and a catalytic amount of Nafion^®‐TMS were heated to 90–100 °C in the absence of solvent. The following ketones have been tested: 2‐bromo‐1‐phenyl‐1‐ethanone, 2‐bromo‐cyclopentenone, 3‐bromo‐3‐methyl‐2‐butanone, 3‐chloro‐3‐methyl‐2‐butanone, 1‐bromo‐3,3‐dimethyl‐2‐butanone, 1‐chloro‐3,3‐dimethyl‐2‐butanone, 2‐bromocyclohexanone, 2‐chloro‐1‐cyclohexyl‐1‐ethanone, 1,1‐dibromo‐3,3‐dimethyl‐2‐butanone, 1,3‐dibromo‐3‐methyl‐2‐butanone, 1,3‐dibromo‐2‐butanone, 1,3‐dibromo‐2‐propanone, 2‐chloro‐1‐phenyl‐1‐ethanone, and endo‐2‐bromocamphor. Yields were in the range 57–100% with the exceptions of endo‐2‐bromocamphor which afforded <10% yield and the dibromoketones 1,1‐dibromo‐3,3‐dimethyl‐2‐butanone and 1,3‐dibromo‐3‐methyl‐2‐butanone for which the method failed. Factors determining the scope and limitations are briefly discussed. Full experimental details and spectroscopic data of the acetals are given.     

Bis(3,5‐dimethylphenyl)‐(S)‐pyrrolidin‐2‐ylmethanol: an Improved Organocatalyst for the Asymmetric Epoxidation of α,β‐Enones

The asymmetric epoxidation of α,β‐enones by the readily available bis(3,5‐dimethylphenyl)‐(S)‐pyrrolidin‐2‐ylmethanol and tert‐butyl hydroperoxide (TBHP) is described. Stereoelectronic substitution on the aryl moiety of diaryl‐2‐pyrrolidinemethanols was found to significantly affect the efficiency with respect to the previously reported (S)‐diphenyl‐2‐pyrrolidinemethanol. Improved reactivity and enantioselectivity were achieved with bis(3,5‐dimethylphenyl)‐(S)‐pyrrolidin‐2‐ylmethanol at reduced catalyst loading (20 mol %) with ees up to 94% for chalcone epoxides under mild reaction conditions, whereas (S)‐diphenyl‐2‐pyrrolidinemethanol afforded a maximum ee of 80%. Interestingly, the methodology is applicable to the epoxidation of more challenging aliphatic or enolizable enones with good control of the asymmetric induction (up to 87% ee).     

Synthesis,Crystal Structure,and Thermal Behaviors of 3‐Nitro‐1,5‐bis(4,4′‐dimethylazide)‐1,2,3‐triazolyl‐3‐azapentane (NDTAP)

The energetic material, 3‐nitro‐1,5‐bis(4,4′‐dimethyl azide)‐1,2,3‐triazolyl‐3‐azapentane (NDTAP), was firstly synthesized by means of Click Chemistry using 1,5‐diazido‐3‐nitrazapentane as main material. The structure of NDTAP was confirmed by IR, ¹H NMR, and ¹³C NMR spectroscopy; mass spectrometry, and elemental analysis. The crystal structure of NDTAP was determined by X‐ray diffraction. It belongs to monoclinic system, space group C2/c with crystal parameters a=1.7285(8) nm, b=0.6061(3) nm, c=1.6712(8) nm, β=104.846(8)°, V=1.6924(13) nm³, Z=8, μ=0.109 mm⁻¹, F(000)=752, and D_c=1.422 g cm⁻³. The thermal behavior and non‐isothermal decomposition kinetics of NDTAP were studied with DSC and TG‐DTG methods. The self‐accelerating decomposition temperature and critical temperature of thermal explosion are 195.5 and 208.2 °C, respectively. NDTAP presents good thermal stability and is insensitive.     

Synthesis,characterization and (electro)chemical polymerization of triphenylamine‐end‐functionalized poly(ε‐caprolactone)

Triphenylamine‐based oligomers and polymers with linear, hyperbranched, star‐shaped or dendrimer architectures have been synthesized and studied due to their interesting electro‐optical properties. In many cases insoluble materials are obtained. In this study, we report the synthesis of grafted polytriphenylamine by chemical and electrochemical polymerization of triphenylamine‐end‐functionalized poly(ε‐caprolactone). Functionalized ε‐caprolactone oligomers were obtained by ring‐opening polymerization of ε‐caprolactone initiated by 4‐hydroxymethyltriphenylamine/stannous octanoate (tin 2‐ethylhexanoate). The ring‐opening polymerization of ε‐caprolactone using 4‐hydroxymethyltriphenylamine/stannous octanoate as initiating system provided ε‐caprolactone oligomers, with well‐defined molecular weights, containing a triphenylamine terminal group. Chemical and electrochemical coupling oxidation of the triphenylamine ends allowed the formulation of polyarylamines with ε‐caprolactone oligomers as grafts. Graft copolymers with an aryleneamine backbone and short poly(ε‐caprolactone) grafts were obtained by (electro)chemical oxidation of oligomers containing triphenylamine terminal groups. Copyright © 2009 Society of Chemical Industry