差示扫描量热法测定比沙可啶的纯度

建立差示扫描量热法测定比沙可啶原料药样品纯度的方法。考察了炉体气氛、升温速率、称样量3个因素对差示扫描量热法测定结果的影响,确定差示扫描量热法最佳实验条件:升温速率为2.0 K/min,称样量为2.0~4.0 mg,炉内气体为静态空气。差示扫描量热法测定比沙可啶样品纯度为99.86%,测定结果的相对标准偏差为0.02%(n=6),差示扫描量热法测定比沙可啶样品纯度值与HPLC测定结果具有良好的一致性。该方法可以快速、准确地测定比沙可啶化学纯度,为比沙可啶纯度测定提供了一种新的分析方法。     

差示扫描量热法对芝麻酚纯度标准物质的定值

建立了采用差示扫描量热法对芝麻酚纯度标准物质的定值及不确定度评价的数学模型、有效检测技术和分析方法.采用差示扫描量热法测量芝麻酚样品纯度的实验条件为升温速率3.0 K/min,称样量3.4～4.7 mg,炉内气体为静态空气.对通过均匀性检验和长期稳定性考察的芝麻酚纯度标准物质进行定值和不确定度评价,同时采用高效液相色谱...     

2,4,6-三氯酚纯品原料纯度定值方法研究

对用于溶液标准物质制备的纯品原料2,4,6-三氯酚纯度定值方法进行了探讨。采用气相色谱质谱法(GC–MS)对主成分和杂质进行定性鉴定。用高效液相色谱法(HPLC–DAD)、气相色谱法(GC–FID)和差示扫描量热法(DSC)3种不同原理的方法对主成分定值。卡尔费休法测量水分,电感耦合等离子体质谱(ICP–MS)测量无机杂质。2,4,6-三氯酚纯度定值结果为99.3%,扩展不确定度为0.6%(k=2)。     

差示扫描量热法测定除草剂绿麦隆的纯度

研究了用差示扫描量热法(DSC)测定绿麦隆的纯度。该法测定最佳条件为升温速率0.5 K.min-1,样品量2~3 mg,保护气流速20 mL.min-1。用本法测得绿麦隆原药的纯度为98.35%,相对标准偏差(RSD)为0.034%,测定结果与已知纯度相符。并将测定结果与高效液相色谱(HPLC)法进行了比较。该法具有操作简便,样品用量少,准确度和精密度均较高等优点。     

5-甲基吗啡-3-氨基-2-唑烷基酮标准物质的研制

研制了呋喃它酮的代谢产物5-甲基吗啡-3-氨基-2-唑烷基酮(AMOZ)的标准物质.采用红外光谱和液相色谱-质谱法对AMOZ进行了定性鉴定,建立并优化了用于AMOZ主成分定值的高效液相色谱-二极管阵列检测器法(HPLC-DAD)、气相色谱-氢火焰离子化检测器法(GC-FID)和差示扫描量热法(DSC).将卡尔费休法和热...     

差示扫描量热法测定草酸艾司西酞普兰纯度

采用差示扫描量热法(DSC),根据DSC曲线利用纯度分析软件测定草酸艾司西酞普兰的纯度。对实验条件进行了优化,升温速率为4.0 K/min,称样量为2~3.2 mg。测得草酸艾司西酞普兰的纯度为99.17%,相对标准偏差为0.05%(n=6)。该法测定结果与非水滴定法测定结果(99.24%)基本一致。差示扫描量热法可用于测定草酸艾司西酞普兰纯度,方法操作简便、结果准确。     

没食子酸丙酯纯度标准物质的研究

研制了没食子酸丙酯纯度标准物质。依据国家《一级标准物质研制技术规范》,采用高效液相色谱(HPLC)法和差示扫描量热(DSC)法对没食子酸丙酯纯度标准物质进行联合定值,进行了相应的不确定度评定。研制的没食子酸丙酯纯度标准物质定值结果为(99.8±0.5)%(k=2,P=0.95)。该标准物质可用于相关药品生产及使用单位的质量控制和分析方法确认评价。     

差示扫描量热法测定马来酸酐纯度

用差示扫描量热法（DSC）测定马来酸酐的纯度,测定条件为升温速率0．8℃／min,样品量2．6～2．8mg,氮气流速为40mL/min。纯度测定结果的相对标准偏差（RSD）为0．02％（n=5）。将DSC法、液相色谱法、药典法、滴定分析法对不同物质纯度的测定结果进行了比对,4种方法的测定结果基本一致。DSC法简便、快速、准确、重现性好,适合马来酸酐纯度的测定。     

甲基苯丙胺标准物质的定值与不确定度分析

为了建立法庭科学毒品检测量值溯源体系,研制了甲基苯丙胺纯度标准物质。通过红外光谱、质谱法对甲基苯丙胺样品进行定性分析,优化并建立了高效液相色谱(HPLC)、差示扫描量热法(DSC)两种定值分析方法。采用热重分析法和电感耦合等离子体质谱法测定水分和无机离子的含量。通过均匀性与稳定性检验结果表明,甲基苯丙胺标准物质的均匀性良好,稳定性至少1年,同时对其进行了不确定度评定。研制的甲基苯丙胺标准物质的纯度为99.8%,扩展不确定度为0.2%(k=2)。     

柚皮素标准物质的研制及不确定度评定

建立了柚皮素标准物质的研制和定值方法。通过红外光谱和核磁共振氢谱对样品进行定性分析,经过柱层析纯化、干燥、混匀后,分装得到120瓶样品。采用质量平衡法和差示扫描量热法进行定值分析(质量平衡法包括液相色谱面积归一化法、水分、无机杂质和残留溶剂的测定)。运用液相色谱法考察了样品的均匀性和稳定性,并对定值结果进行了不确定度评定。结果显示,研制的柚皮素标准物质具有良好的均匀性和稳定性,定值结果为99.2%,扩展不确定度为0.2%,有效期6个月。     

柘树根多糖的分离纯化及结构表征

以柘树[Cudrania tricuspidata(Carr.) Bur.]的根为材料, 经热水抽提、木瓜蛋白酶-Sevag法除蛋白、乙醇沉淀和DEAE-Sephadex A-50凝胶柱层析分离纯化, 得到一种水溶性的柘树根多糖(CPS-0). 采用HPLC、糖基组成分析、甲基化分析、GC、GC-MS、NMR(1H NMR, 13C NMR及HMQC)、元素分析、UV和IR等技术对CPS-0的纯度、性质、组成和结构进行表征. 结果表明, CPS-0仅含葡萄糖, 分子量为4.6×103, 主链由1,4-连接的α-D-葡萄糖残基组成, 其侧链由末端及1,4-连接的葡萄糖残基构成, 取代于主链分支点葡萄糖的6位, 平均每10个葡萄糖残基组成的重复单元中含有1个分支.     

Differential scanning calorimetry to measure the purity of polycyclic aromatic hydrocarbons

The application of differential scanning calorimetry (DSC) for purity determination is well documented in literature and is used amongst others in the analysis of pure organic crystalline compounds. The aim of this work is to examine whether the DSC method for purity determination consistently produces values for the purity of polycyclic aromatic hydrocarbons (PAHs) which are sufficiently accurate as required for the certification of reference materials. For this purpose, 34 different existing PAH certified reference materials were tested. The DSC results are shown to be consistent with the results obtained by other methods assessing the organic impurities content in PAHs, like gas chromatography (GC), high performance liquid chromatography (HPLC) and mass spectrometry. Significant differences between the measured values and the certified purity values were observed only in a limited number of cases.     

Purity determination and uncertainty evaluation of theophylline by mass balance method, high performance liquid chromatography and differential scanning calorimetry

Purity determination of pure organic substance is essential for the establishment of traceability to SI units. A mass balance method was employed to determine the purity of theophylline certified reference materials (CRM), compared with high performance liquid chromatography (HPLC) and differential scanning calorimetry (DSC). In the approach of the mass balance, the impurities were identified by ion trap time-of-flight mass spectrometer (IT-TOF-MS) and quantified by HPLC. The purity of theophylline CRM determined by mass balance method was 99.82% with an extended uncertainty of 0.1% (k = 2). The uncertainty evaluation of purity demonstrated that the accuracy of the mass balance method is better than that of HPLC and DSC. It indicated that the mass balance is suitable for the CRM and pharmaceutical standards.     

Reversed-phase high-performance liquid chromatography purification of methyl esters of C(16)-C(28) polyunsaturated fatty acids in microalgae, including octacosaoctaenoic acid [28:8(n-3)

A preparative reversed-phase (RP; C(18)) high-performance liquid chromatography (HPLC) method with gradient elution using acetonitrile (MeCN)-chloroform (CHCl(3)) (or dichloromethane (DCM)) and evaporative light-scattering detection (ELSD) with automatic multiple injection and fraction collection was used to purify milligram quantities of microalgal polyunsaturated fatty acids (PUFA), separated as methyl esters (ME). PUFA-ME purified included methyl esters of docosahexaenoic acid (DHA; 22:6(n-3)), eicosapentaenoic acid (EPA; 20:5(n-3)) and the unusual very long-chain (C(28)) highly unsaturated fatty acid (VLC-HUFA), octacosaoctaenoic acid [28:8(n-3)(4, 7, 10, 13, 16, 19, 22, 25)] from the marine dinoflagellate Scrippsiella sp. CS-295/c. Other PUFA purified from various microalgae using this RP-HPLC method to greater than 95% purity included 16:3(n-4), 16:4(n-3), 16:4(n-1) and 18:5(n-3). The number of injections required was variable and depended on the abundance of the desired PUFA-ME, and resolution from closely eluting PUFA-ME, which determined the maximum loading. The purity of these fatty acids was determined by electron impact (EI) GC-MS and the chain length and location of double bonds was determined by EI GC-MS of 4,4-dimethyl oxazoline (DMOX) derivatives formed using a low temperature method. Advantages over silver-ion HPLC for purifying PUFA-ME is that separation occurs according to chain length as well as degree of unsaturation enabling separation of PUFA-ME with the same degree of unsaturation but different chain length (i.e. between 18:5(n-3) and 20:5(n-3)). In addition, PUFA-ME are not strongly adsorbed, but elute earlier than their more saturated corresponding FAME of the same chain length. This method is robust, simple, and requires only a short re-equilibration time. It is a useful tool for preparing milligram quantities of pure PUFA-ME for bioactive screening (as free fatty acids), although many multiple injections may be required for minor PUFA-ME. It also enabled dose-response and structure-activity studies to be carried out. It can be used for the enrichment of low levels of VLC-HUFA-ME to facilitate elucidation of their chemical structure and so is a useful adjunct to EI GC-MS of DMOX derivatives and other techniques such as NMR, which requires milligram quantities of purified compounds.     

Purification and thermal analysis of perfluoro-n-alkanoic acids

Purification of perfluoro-n-alkanoic acids (C(n)F(2n+1)COOH, n=7, 9, 11, 13, 15 and 17) was made by repeated recrystallizations from n-hexane/acetone mixed solvent, and their purity was found to be more than 99.5% by GC-MS, NMR, and elemental analysis. The thermal behaviors such as melting point and enthalpy change of fusion were investigated using differential scanning calorimetry (DSC). The melting point monotonously increased with increasing carbon number (n) of the acids, while the enthalpy change showed irregularity at n=14. The crystal structure of these acids was found to be dependent upon solvent used for recrystallization; that is, the acids recrystallized from the above solvent becomes more stable energetically, indicating their higher enthalpy change of fusion than that of the solidified acids from fused ones. The solid state was also found to vary depending upon the thermal history, indicating that a few crystal structures of the solid state are quite similar energetically. The melting points (T(m)) of perfluoro-n-alkanoic acids are higher than those of corresponding n-alkanoic acids, and the difference in T(m) increases with increasing carbon number in the acids.     

SEPARATION OF THE MINOR FLAVONOLS FROM FLOS GOSSYPII BY HIGH-SPEED COUNTERCURRENT CHROMATOGRAPHY

An effective high-speed countercurrent chromatography (HSCCC) method was established for further separation and purification of four minor flavonols in addition to five major flavonols which were reported by our previous study from extracts of Flos Gossypii. HSCCC was performed with three two-phase solvent systems composed of n-hexane-ethyl acetate-methanol-water (7.5:15:6:7, v/v), (2.5:15:2:7, v/v) and (0:1:0:1, v/v). The separation was repeated 3 times, and 3.8 mg of 8-methoxyl-kaempferol-7-O-β-D-rhamnoside (HPLC purity 98.27%), 6.7 mg of astragalin (HPLC purity 94.18%), 3.3 mg of 4'-methoxyl-quercetin-7-O-β-D-glucoside (HPLC purity 94.30%) and 8.2 mg of hyperoside (HPLC purity 93.48%) were separated from 150 mg of the crude sample. The chemical structures of the flavonols were confirmed by MS, (1)H NMR and (13)C NMR. Meanwhile, the results indicated that the target compound with smaller K value (<0.5) can be separated by increasing column length of HSCCC. And four separation rules of flavonols according to the present study and references were summarized, which can be used as a useful guide for separation of flavonols by HSCCC.     

不同结晶度的乙二醇及其水溶液玻璃化转变与焓松弛

为了考察晶体成分对无定形成分玻璃化转变和结构松弛行为的影响,利用差示扫描量热法(DSC),结合低温显微技术,研究了乙二醇(EG)及其50％水溶液在不同结晶度时的玻璃化转变和焓松弛行为.采用等温结晶方法控制骤冷的部分结晶玻璃体中的晶体份额.DSC结果表明,对于部分结晶的EG,只有单一的玻璃化转变过程,而对于50％EG,当结晶度不同时,不同程度地表现出两次玻璃化转变（无定形相Ⅰ和无定形相Ⅱ）.相Ⅰ的玻璃化转变温度和完全无定形态的含水EG的玻璃化转变温度相一致;相Ⅱ的玻璃化转变温度要比此温度约高6 ℃.低温显微观察结果印证了DSC实验结果.DSC等温退火的实验和KWW(Kohlrausch-Williams-Watts)衰变函数分析结果表明,EG无定形和50％EG中的两种无定形有不同的焓松弛行为.     

Tough polyion complex hydrogel films of natural polysaccharides

The developments of tough hydrogels in recent years have greatly expanded the applications of hydrogels as structural materials. However, most of the tough hydrogels are made of synthetic polymers. To develop biopolymer-based tough hydrogels has both fundamental and practical significances. Here we report a series of polysaccharides-based tough hydrogel films prepared by polyion complexation and solvent evaporation of chondroitin sulfate(CS) and protonated chitosan(CHT) solutions with different weight ratios. The obtained CS/CHT gel films with thickness of 40-80 μm and water content of 66 wt%-81 wt% possess excellent mechanical properties, with tensile breaking stress and breaking strain being 0.4-3 MPa and 160%-320%, respectively. We found that in the mixture solutions there are large amounts of excess CHT in terms of charges; after swelling the films in water, the acetic acid, which is used to protonate the amino groups of CHT, diffuses out of the gel matrix, enhancing the intermolecular interactions between CHT molecules and thus improving the mechanical properties of gel films, besides the ionic bonds between CS and CHT. Antimicrobial tests also showed that the gel films with low weight ratio of CS to CHT, corresponding to the case with excess CHT, have evident antimicrobial effect. These CS/CHT gel films with good mechanical properties and antimicrobial effect should extend the applications of hydrogels in biomedical fields.