Comprehensive study on the formation of polyelectrolyte complexes from (quaternized) poly[2‐(dimethylamino)ethyl methacrylate] and poly(2‐acrylamido‐2‐methylpropane sodium sulfonate)

Polyelectrolyte complexes (PECs) have been prepared from well‐defined (quaternized) poly[2‐(dimethylamino)ethyl methacrylate] (PDMAEMA) and high molecular weight poly(2‐acrylamido‐2‐methylpropane sodium sulfonate) (PAMPSNa) after a thorough study of their viscometric properties. The effect of pH and quaternization degree of PDMAEMA on PECs stoichiometry has been examined. PEC‐based materials have been characterized in terms of thermal stability, equilibrium swelling degree, and free/bound water composition. The stoichiometry and swellability of the physically crosslinked hydrogels obtained from fully quaternized PDMAEMA/PAMPSNa complexes do not depend on pH. In contrast, PECs made of non quaternized PDMAEMA and PAMPSNa are highly affected by pH, and could reversibly disintegrate at pH ≥ 9. Partially quaternized PDMAEMA/PAMPSNa PECs exhibit intermediate properties and form stable loose structures in the whole investigated pH range. Finally, stable dispersions of PECs nanoparticles have been successfully produced from dilute solutions of the complementary polyelectrolytes. The nanoparticle average diameter as determined by dynamic light scattering proved to depend on the molar fraction of DMAEMA‐based subunits and on the initial polyelectrolyte concentration. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5468–5479, 2006     

Novel polyelectrolyte complexes between N-carboxyethylchitosan and synthetic polyelectrolytes

Novel polyelectrolyte complexes (PEC) between the polyampholyte N-carboxyethylchitosan (CECh) and polyacid or polybase have been prepared. The complex formation between CECh and poly(2-acryloylamido-2-methylpropanesulfonic acid) (PAMPS), poly(acrylic acid) (PAA) or poly(ethylene imine) (PEI) has been studied. The complex CECh/PAMPS is formed in the pH range from 1.2 to 6.0. The complex CECh/PAA is formed in the range 4.8-6.0 and CECh/PEI—from pH 5.4 to 7.0. The stoichiometry of the complexes depends on the pH value of the medium. In case of CECh/PAMPS and CECh/PAA the maximum quantity of complex is formed in excess of CECh and in the case of CECh/PEI—in excess of PEI. It has been shown that PEC formation between CECh and PAMPS improves the haemocompatibility of CECh.     

Polyelectrolyte complex nanoparticles from N‐carboxyethylchitosan and polycationic double hydrophilic diblock copolymers

For the first time, the polyelectrolyte complex (PEC) formation tool was used for preparation of core‐shell nanoparticles form the natural polyampholyte N‐carboxyethylchitosan (CECh) and weak polycationic (protonated) polyoxyethylene‐b‐poly[2‐(dimethyl‐amino)ethyl methacrylate] (POE‐b‐PDMAEMA) diblock copolymers. The performed dynamic light scattering analyses revealed that nanoparticles with a PEC core and a POE shell could be formed at mixing ratio between the oppositely charged groups equal to 1/1 depending on CECh molar mass, polymerization degree of PDMAEMA block and ionic strength. The results were confirmed by the performed AFM and cryo‐TEM analyses. When high molar mass CECh was used, core‐shell nanoparticles were obtained with the diblock copolymer of the shortest PDMAEMA block at ionic strength (I) of 0.01. At ionic strength value close to the physiological one (I = 0.1) secondary aggregation occurred. Spherical nanoparticles at I = 0.1 were obtained upon lowering the CECh molar mass. Depending on the polymer partners and medium parameters the size of the obtained particles varied from 60 to 600 nm. The X‐ray photoelectron spectra evidenced the hydrophilic POE‐block shell—coacervate CECh/PDMAEMA‐block core structure. The nanoparticles are stable in a rather narrow pH range around 7.0, thus revealing the high pH‐sensitivity of the obtained core‐shell particles. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2105–2117, 2009     

Solvent-free synthesis and purification of poly[2-(dimethylamino)ethyl methacrylate] by atom transfer radical polymerization

Solvent-free synthesis of well-defined poly[2-(dimethylamino)ethyl methacrylate] (PDMAEMA) (co)polymers was performed by atom transfer radical polymerization conducted under very mild conditions (in bulk at 25 degrees C). The pH-dependence and the thermo-responsive behaviour of PDMAEMA in aqueous solution were operated to isolate and purify the (co)polymers without using any organic solvent or further catalyst extraction. The viscosity in aqueous solution of so-purified PDMAEMA homopolymers and their block copolymers with poly(ethylene glycol) (PEG) was studied as a function of molar mass and concentration and a typical polyelectrolyte behaviour was observed, these catalyst-deprived polycations are able to form stable and non toxic complexes with DNA, showing good transfection efficacies in gene therapy.     

Contribution of flow field flow fractionation with on line static and dynamic light scattering to the study of hydrosoluble polyelectrolyte complexes

Water soluble polyelectrolyte complexes (PECs) formed between polyaspartate (anionic polymer) and poly(trimethylammonium propyl methacrylamide chloride) (cationic polymer) were studied by flow field flow fractionation with on-line coupling multi-angle laser light scattering-quasi elastic light scattering-differential refractive index determination (F4/MALLS/QELS/DRI). The separation technique permits to characterize polydisperse PECs. The molar mass of the polycation (PC) influences the stiffness of the PECs and the proportion between single PECs (i.e. nPA/1PC) and multiple PECs (i.e. nPA/n’PC). High ionic strength with NaCl (>0.1 M) tends to break the multiple PECs while CaCl₂ destroys PECs and leads to the formation of complexes polyaspartate/Ca²⁺. The studied PECs can be used as inhibitors to the calcite formation in the drilling fluids.     

A Novel Fission Process in Mini-emulsion RAFT Polymerization: Shell Crosslinked Nanoparticles as a Model

Shell crosslinked nanoparticles, prepared from copolymerization of styrene and disulfide crosslinker, using poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) as stabilizer and macroinitiator, exhibited a special fission behavior during the mini-emulsion RAFT polymerization process.     

Poly(2-(dimethylamino)ethyl methacrylate)-b-poly(hydroxypropyl methacrylate) copolymers/bovine serum albumin complexes in aqueous solutions

Complexation ability of poly(2-(dimethylamino)ethyl methacrylate)-b-poly(hydroxy propyl methacrylate) (PDMAEMA-b-PHPMA) amphiphilic doubly thermo-responsive block copolymers, and their quaternized counterparts QPDMAEMA-b-PHPMA, toward bovine serum albumin (BSA) is studied in aqueous solutions. The PDMAEMA-b-PHPMA amphiphilic block copolymers self-assemble in nanostructured aggregates with PDMAEMA coronas having different inner structure and micro-polarity depending on the solubilization protocol utilized when inserted in aqueous media. By incorporating different BSA concentrations, we investigate the copolymer–protein interactions by light scattering measurements in aqueous solutions in a broad temperature range, utilizing different solubilization protocols for the copolymers. Fluorescence spectroscopy and ζ-potential measurements were also utilized to investigate the structure and properties of the copolymer/protein complexes formed in each case. Such knowledge may lead to a better understanding of the inner structure and micro polarity of the nanostructured aggregates formed by the novel (Q)PDMAEMA-b-PHPMA copolymers, along with their potential abilities in nanocarrier formation, protein complexation, stabilization, and delivery.     

Preparation and characterization of core–shell polymer particles with protonizable shells prepared by oxyanionic polymerization

A series of polystyrene (PS)/poly(vinyl acetate) (PVAc) crosslinked particles (240, 210, or 90 nm) with different concentrations of PS (75, 50, or 25 wt %) were prepared by soap‐free emulsion polymerization. Based on the crosslinked polymer particles, three series of monodisperse core–shell particles with pH‐sensitive poly[2‐(dimethylamino)ethyl methacrylate] (PDMAEMA) shells were synthesized by oxyanionic polymerization. During the oxyanionic polymerization, the acetate groups of PVAc were hydrolyzed, and the hydroxyl groups that formed on the surfaces of the particles, acting as initiators, were transferred to ? O^?K⁺ by DMSO^?K⁺ (where DMSO is dimethyl sulfoxide) at the same time; then, ? O^?K⁺ initiated the polymerization of 2‐(dimethylamino)ethyl methacrylate. ¹H NMR and Fourier transform infrared studies confirmed the existence of PDMAEMA shells, and the contents of PDMAEMA were measured by elemental analysis. Because the PDMAEMA chain could be protonated at a low pH, these core–shell particles could adsorb negatively charged modified magnetite particles, and at higher pHs, the magnetite particles could be released again; this process was reversible. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6081–6088, 2004     

New antibacterial cationic surfactants prepared by atom transfer radical polymerization

Efficient antibacterial surfactants have been prepared by the quaternization of the amino groups of poly(ethylene‐co‐butylene)‐b‐poly[2‐(dimethylamino)ethylmethacrylate] (PEB‐b‐PDMAEMA) diblock copolymers by octyl bromide. The diblock copolymers have been synthesized by ATRP of 2‐(dimethylamino)ethylmethacrylate (DMAEMA) initiated by an activated bromide‐end‐capped poly(ethylene‐co‐butylene). In the presence of CuBr, 1,4,7,10,10‐hexamethyl‐triethylenetetramine (HMTETA), and toluene at 50 °C, the initiation is slow in comparison with propagation. This situation has been improved by the substitution of CuCl for CuBr, all the other conditions being the same. Finally, the addition of an excess of CuCl₂ (deactivator) to the CuCl/HMTETA catalyst is very beneficial in making the agreement between the theoretical and experimental number‐average molecular weights excellent. The antibacterial activity of PEB‐b‐PDMAEMA quaternized by octyl bromide has been assessed against bacteria and is comparable to the activity of a commonly used disinfectant, that is, benzalkonium chloride. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1214‐1224, 2006     

A novel cationic triblock copolymer as noncovalent coating for the separation of proteins by CE

A novel noncovalent adsorbed coating for CE has been prepared and explored. This coating was based on quaternized poly(2-(dimethylamino)ethyl methacrylate)-block-poly(ethylene oxide)-block-poly(2-(dimethylamino)ethyl methacrylate) (QDED) triblock copolymer which was synthesized by atomic transfer radical polymerization (ATRP) in our laboratory. The polycationic polymer and the negatively charged fused-silica surface attracted each other through electrostatic interactions and hydrogen bonds. It was demonstrated that the coated capillaries provided an electroosmotic flow with reverse direction, and the magnitude of the electroosmotic flow can be modulated by varying the molecular mass of poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) block and pH value of the buffer. The effects of the molecular mass of PDMAEMA block in QDED triblock copolymer and pH value of the buffer on the separation of basic proteins were investigated in detail. The triblock copolymer coatings showed higher separation efficiency, better migration time repeatability and would apply to wider range of pH than bare fused-silica capillary when used in separating proteins. Proteins from egg white were also separated through this QDED triblock copolymer-coated capillary. These results demonstrated that the QDED triblock copolymer coatings are suitable for analyzing biosamples.     

New insights into the structure of polyelectrolyte complexes

The formation of polyelectrolyte complexes (PECs) from oppositely charged linear polyelectrolytes (PELs) was studied using static light scattering at various salt concentrations. The PELs used were poly(allylamine hydro chloride) (PAH) and the two polyanions poly(acrylic acid) (PAA) and poly(methacrylic acid) (PMAA). Physical characteristics such as the radii of gyration, molecular weights, and water contents of the PECs were determined at various molar mixing ratios. Despite relatively small differences in chemical structure between PAA and PMAA, fairly large differences were detected in these physical characteristics. Generally, PECs comprising PMAA were larger and contained more water. Moreover, by using cryogenic transmission electron microscopy, transmission microscopy and atomic force microscopy, shape and structure of the prepared PECs were investigated both in solution and after drying. The PECs were found to be spherical in solution and the shape was retained after freeze-drying. PECs adsorbed on silica surfaces and dried in air at room-temperature still showed a three-dimensional structure. However, the relatively low aspect ratios indicated that the PECs collapsed significantly due to interactions with the silica during adsorption and drying. At intermediate ionic strengths (1-10 mM), stagnation point adsorption reflectometry (SPAR) showed that the adsorption of low charged cationic PAH-PAA PECs on silica surfaces increased if the pH value was increased from pH 5.5 to 7.5.     

Interaction of polymer and surfactant at the air-water interface: poly(2-(dimethylamino)ethyl methacrylate) and sodium dodecyl sulfate

The interactions between the weak polyelectrolyte, poly(2-(dimethylamino) ethyl methacrylate) or PDMAEMA, and the anionic surfactant sodium dodecyl sulfate (SDS) at the air-water interface have been investigated at pH = 3 and 9 using a combination of neutron reflectivity and surface tension measurements. By using deuterated PDMAEMA in combination with h-SDS and d-SDS, we have been able to directly determine the distribution of both the polymer and the surfactant at the air-water interface. At pH = 3, the polyelectrolyte is positively charged while at pH = 9 it is essentially uncharged. The enhancement in the adsorption of SDS at low coverage suggests that surface active polymer surfactant complexes are forming and adsorbing at the interface. This leads to close to monolayer adsorption of SDS, suggesting that it is surfactant monomers that are complexing with polymers that are in extended conformations parallel to the surface. As the concentration of SDS in the mixtures changes so does the surfactant content of the complexes, which affects the surface activity and hence the coverage of the complexes. Multilayer structures are formed at SDS concentrations of 0.1 and 1 mM, for pH = 3 and 9, respectively.     

The reorientation of poly(2-dimethylamino ethyl methacrylate) after environment stimuli improves hydrophilicity and resistance of protein adsorption

There is a dense poly(2-dimethylamino ethyl methacrylate) (PDMAEMA) layer on the surface of poly(acrylonitrile and 2-dimethylamino ethyl methacrylate) (PAN-DMAEMA) membrane. The contact angle measurement indicated that the hydrophilicity of membrane increases at higher pH value and ionic strength. The reorientation of PDMAEMA after environment stimuli results in further enrichment of ester groups on the membrane surface according to XPS analysis. The amount of adsorbed bovine serum albumin (BSA) on PAN-DMAEMA membrane is dramatically decreased at higher pH value and ionic strength. A viewpoint based on the minimizing electrostatic interactions between PDMAEMA groups after environment stimuli leading to the conformation switch of PDMAEMA chains from stretched to shrunk states, which results in higher surface enrichment of ester groups enhancing hydrophilic property of the PAN-DMAEMA membrane, was put forward to explain the resistance of protein adsorption on the membrane.     

Rosette‐Shaped Calcite Structures at Surfaces: Mechanistic Implications for CaCO3 Crystallization

Biomineralization is believed to be achieved by the intimate cooperation of soluble macromolecules and an insoluble matrix at the specific inorganic–organic interface. It has been reported that positively charged matrices play an important role in controlling the structure of CaCO₃ at surfaces, although detailed mechanisms remain unclear. In this work, we studied the transformation from amorphous CaCO₃ to calcite crystals on surfaces by using thin films of poly(2‐(dimethylamino)ethyl methacrylate) (PDMAEMA) and its quaternized form. The positively charged PDMAEMA film was found to possess unique properties for CaCO₃ crystallization: individually separated, single calcite crystals were formed on the PDMAEMA film in the absence of poly(acrylic acid) (PAA), while circularly fused calcite crystals were formed in the presence of PAA. The circularly fused (rosette‐shaped) calcite crystals could be changed from a completely packed rosette to a ring‐shaped, hollow structure by tuning the crystallization conditions. A number of factors, such as reaction time, amount of (NH₄)₂CO₃, concentration of PAA, and charge of matrix‐films, were varied systematically, and we now propose a mechanism based on these observations.     

Synthesis and swelling behavior of pH-responsive polybase brushes

We synthesize polybase brushes and investigate their swelling behavior. Poly(2-(dimethylamino)ethyl methacrylate)) (PDMAEMA) brushes are prepared by the "grafting from" method using surface-initiated Atom Transfer Radical Polymerization to obtain dense brushes with relatively monodisperse chains (PDI = 1.35). In situ quaternization reaction can be performed to obtain poly(2-(trimethylamino)ethyl methacrylate)) (PTMAEMA) brushes. We determine the swollen thickness of the brushes using ellipsometry and neutron reflectivity techniques. Brushes are submitted to different solvent conditions to be investigated as neutral brushes and weak and strong polyelectrolyte brushes. The swelling of the brushes is systematically compared to scaling models. It should be pointed out that the scaling analysis of different types of brushes (neutral polymer and weak and strong polyelectrolyte brushes) is performed with identical samples. The scaling behavior of the PDMAEMA brush in methanol and the PTMAEMA brush in water is in good agreement with the predicted scaling laws for a neutral polymer brush in a good solvent and a polyelectrolyte brush in the osmotic regime. The salt-induced contraction of the quaternized brush is observed for high salt concentration, in agreement with the predicted transition between the regimes of the osmotic brush and the salted brush. From the crossover concentration, we calculate the effective charge ratio of the brush following the Manning counterion condensation. We also use PDMAEMA brushes as pH-responsive polybase brushes. The swelling behavior of the polybase brush is intermediate with respect to the behavior of the neutral polymer brush in a good solvent and the behavior of the quenched polyelectrolyte brush, as expected. The effective charge ratio of the PDMAEMA brush is determined as a function of pH using the scaling law of the polyelectrolyte brush in the osmotic regime.     

Interpolyelectrolyte complexes: a single-molecule insight

Polyelectrolyte (PE) complexes (PECs) between long polycation poly(methacryloyloxyethyl dimethylbenzylammonium chloride) and short polyanion polystyrene sulfonic acid adsorbed onto mica were studied by atomic force microscopy. If one component is taken in excess, then a rapid coupling of the oppositely charged polyions first leads to the formation of nonequilibrium structures when collapsed PEC particles coexist with unreacted PEs molecules. The equilibrium PEC particles possess micelle-like core-shell morphology if the short polyion is taken in excess. When long PE is given in excess, equilibrium PECs are stabilized by wrapping the long polyion around hydrophobic segments of the PEC. We propose that transformations of initially formed nonequilibrium aggregates proceed through slow reactions (addition or/and substitution) of primary complexes with unreacted PEs chains, which finally leads to equilibrium PECs with optimized morphology. As expected, the mixing of oppositely charged PEs in a near-stoichiometric ratio leads to highly aggregated water-insoluble PECs.     

Complexation of poly(acrylic acid)s with uranyl ion

The complexation of uranyl ion (UO₂²⁺) in aqueous solution with polymers containing carboxylic acid groups was studied potentiometrically. Overall formation constants of the uranyl complexes with poly(methacrylic acid) and crosslinked poly(acrylic acid) were much larger than those with the corresponding low molecular carboxylic acids. Decrease in the viscosity of the polymer solution on adding uranyl ion indicated that poly(acrylic acid) forms intra-polymer chelates with uranyl ion. The crosslinked poly(acrylic acid) adsorbed uranyl ions at higher efficiency than transition metal ions.     

Synthesis of polymer-stabilized magnetic nanoparticles and fabrication of nanocomposite fibers thereof using electrospinning

Polymer-stabilized magnetic nanoparticles were obtained using two biocompatible polyelectrolytes: N-carboxyethylchitosan (CECh) and poly(2-acrylamido-2-methylpropanesulfonic acid) (PAMPS). The size of the particles (mean diameter 10 or 30 nm, respectively) and the stability of the dispersions could be effectively controlled depending on the polyelectrolyte nature. The presence of polyelectrolyte shell was proved by transmission electron microscopy (TEM) studies and confirmed by thermogravimetric analyses. Depending on the polyelectrolyte nature the magnetic nanoparticles existed in different magnetic states - superparamagnetic or intermediate state between superparamagnetic and ferrimagnetic one, as evidenced by the measurements of the magnetization and Mössbauer analyses. Fabrication of nanocomposite magnetic fibers with mean diameter in the range 100-500 nm was achieved using electrospinning of the system CECh/ferrofluid/non-ionogenic polymer.     

Poly(styrene) coating of monodispersed colloidal metal oxides by grafting to hydrophilic macromer adsorbed on the surface

Poly(styrene) (PST) coatings of monodispersed colloidal metal oxide particles by surface grafting to poly(N-vinyl-2-pyrrolidone) (ST–PVP) or quaternized poly(4-vinylpyridine) (ST-PVPy(Me)) macromer, having a vinylphenylene end group, were investigated. Radical polymerization of styrene (ST) in ethanolic silica colloid in the presence of ST-PVP successfully led to the formation of monodispersed PST/PVP copolymer/SiO₂composites. The addition of divinylbenzene (DVB) to the reaction system gave SiO₂ composites coated with crosslinked PST. Graft-polymerization of ST to ST-PVP also took place on TiO₂, CeO₂ and Al(OH)₃ colloidal particles in ethanolic solution. However, ST-PVPy(Me) adsorbed on colloidal silica did not effectively graft PST.     

Layer-by-layer assembly of salt-containing polyelectrolyte complexes for the fabrication of dewetting-induced porous coatings

The layer-by-layer (LbL) assembly of salt-containing nonstoichiometric polyelectrolyte complexes (PECs) with oppositely charged uncomplexed polyelectrolyte for the fabrication of dewetting-induced porous polymeric films has been systematically investigated. Salt-containing poly(allylamine hydrochloride) (PAH) and poly(acrylic acid) (PAA) complexes (noted as PAH-PAA) with a molar excess of PAH were LbL assembled with polyanion poly(sodium 4-styrenesulfonate) (PSS) to produce PSS/PAH-PAA films. The structure of the PAH-PAA complexes is dependent on the concentration of NaCl added to their aqueous dispersions, which can be used to tailor the structure of the LbL-assembled PSS/PAH-PAA films. Porous PSS/PAH-PAA films are fabricated when salt-containing PAH-PAA complexes with a large amount of added NaCl are used for LbL assembly with PSS. In-situ and ex-situ atomic force microscopy measurements disclose that the dewetting process composed of pore nucleation and pore growth steps leads to the formation of pores in the LbL-assembled PSS/PAH-PAA films. The present study provides a facile way to fabricate porous polymeric films by dewetting LbL-assembled polymeric films comprising salt-containing PECs.