共查询到20条相似文献,搜索用时 78 毫秒
1.
2.
准确而快速地评价加热器端差引起的机组热经济性变化,对热力系统的设计、运行和检修具有十分重要的意义.以热力系统热平衡方程、锅炉输入燃料(火用)方程、锅炉吸热量方程、汽轮机输入热(火用)量(火用)方程和汽轮机功率方程为基础,根据小扰动理论和微分理论,得各抽汽量、锅炉输入燃料炯、锅炉吸热量、汽轮机输入热量(火用)和汽轮机功率对端差的变化率.在锅炉(火用)效率、机组炯效率和发电煤耗率概念的基础上,由微分理论推导端差对(火用)经济性指标的影响.以N 1000 - 25/600/600机组为例,计算加热器端差对机组(火用)经济性指标的影响. 相似文献
3.
4.
通过对电解铝能源互联网系统的火用理论分析及方法研究,探讨其系统的火用破坏(火用损)来源和降低措施,以达节能减排目标.建立节能减排目标和能源效率和经济性约束条件的线性函数关系方程,进行效率与经济性最优值求解.通过加入调节经济、效率的权重系数ω,确定系统参量对经济性和效率的影响规律,获得满足目标的最佳参量设置,有效地控制好... 相似文献
5.
对热经济学分析方法进行简要介绍,运用热经济学矩阵模式对某300MW机组进行热经济性分析,得出机组在设计工况下的单位(火用)成本和热经济学成本,并对机组热力系统性能进行评价,指出机组在运行中需要重视的热力设备. 相似文献
6.
通过对热动力装置系统的(火用)分析,指出了(火用)在能源中的作用.提出了一种对(火用)能系统进行热经济性分析决策的方法-热经济系数法,并以实例探讨了其方法在方案选择中的应用.总结了(火用)效率与热经济系数之间的关系. 相似文献
7.
热经济学会计模式从热经济性和经济性两方面对机组进行分析,从而使得计算结果更加合理、准确。以300MW火力发电机组为例建立热力学模型,将整个系统划分成若干个子系统;根据机组THA的实验工况参数,计算各股能流的火用值,进而计算各子系统的火用效率、火用损率、火用成本和火用经济系数等性能参数,并利用各性能参数对机组进行热经济性和经济性分析。结果表明:低压缸热力学性能比较完善,综合效益好;发电机与中压缸是节能改造的重点。该方法对电厂设备改造和节能效益评价等方面有一定的参考意义。 相似文献
8.
9.
10.
11.
《International Journal of Hydrogen Energy》2022,47(63):26789-26797
The issues related to the reliability of hydrogen engines of unmanned vehicles and increasing the efficiency of using hydrogen as fuel when using the method of its production during the decomposition of hydrogen-containing molecules of liquid-phase organic compounds in a plasma discharge under the action of intense ultrasonic exposure are considered. Experiments have shown that as a result of decomposition in the acoustoplasma discharge of liquid hydrocarbons, solid-phase carbon-containing products are formed, chemical transformations occur in the liquid phase and hydrogen-containing combustible gas is formed. Hydrogen-containing gas can be used as fuel immediately after synthesis, i.e. it does not require separation, since in addition to hydrogen it contains only impurities of CO2 and water vapor. The purpose of the study is to formalize the basic conditions for tightening the control of mutual compliance with the efficiency of hydrogen engines of the same series in the conditions of their mass production. Methods of mathematical statistics and hardware-software modeling were used in the study. The term “unerroric of quality mutual compliance control” is introduced to describe a set of hardware and software tools for such control. The principle of in-depth testing of the technical condition of such engines of one series is described in a multidimensional formulation of the quality control problem for three of their operating parameters at once. The conditions for increasing the mutual correspondence of the measured values of such parameters in the conditions of serial production of hydrogen engines are formalized. 相似文献
12.
13.
14.
15.
世界发电燃料结构在不断的转换过程中。18世纪60年代从薪柴转到煤炭,19世纪到20世纪初大量发展燃煤电厂;20世纪20年代又从煤炭转向石油和天然气,20年代上半叶又大量发展燃油电厂;20世纪末由于天然气生产的发展,天然气因环境影响小,受到工业发达国家的青睐,加速发展天然气电厂。我国70年代初和90年代曾两次发展燃油电厂,由于石油危机和石油价格暴涨而受到制约,不得不实行以煤代油,改造燃油电厂。现在似乎认为燃油电厂不能再搞,但又出现发展燃气电厂的热流,发展燃气电厂确实是当今的世界潮流,但是同当年发展燃油电厂一样,要研究是否符合中国的国情? 相似文献
16.
本文从新型活塞设计的趋势及其对活塞车床的功能要求,讨论活塞车床的设计方案,并从机床功能、造型和宜人性上进行分析。 相似文献
17.
18.
19.
本文对漫灰均温物体在常物性条件下对外辐射传热的Yong值计算建立了数学模型。通过与物体内能Yong公式的数值计算比较,得出了辐射能量的Yong值不大于内能Yong值的结论。从初步的热射Yong值计算公式发现。Yong与物体表面辐射率有关。 相似文献
20.
本文对某型号柴油机热交换器支架裂纹的故障进行了材料分析,模态仿真和应变分析,找出了故障的根源,并根据分析结果提出设计改进建议。 相似文献