Breathable properties of m‐Aramid nanofibrous membrane with high thermal resistance

Electrospinning of m‐aramid in dimethyl acetamide/LiCl solution was investigated to develop thermo‐resistant nanofibrous membranes for breathable waterproof materials. The m‐aramid nanofibers were continuously generated and densely mounted to the membrane without the blockage of the spinning tip during electrospinning. In order to obtain the electrospun m‐aramid nanofibers with different fiber diameters, the polymer concentration in the solution and the spinning distance were varied. Electrospun m‐aramid nanofibrous membranes of various fiber diameters and thicknesses were prepared, and then compared with two commercial expanded polytetrafluoroethylene (ePTFE) membranes with respect to water vapor permeability and pore size. The m‐aramid nanofibrous membrane showed a good water vapor permeability that satisfied the criterion of a breathable membrane, higher than those of the ePTFE porous membranes. Therefore, m‐aramid nanofibrous membrane with thermal and mechanical resistance has great potential for breathable waterproof materials and filters. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41515.     

Reversible photochromic nanofibrous membranes with excellent water/windproof and breathable performance

Electrospun nanofibrous membranes (NFMs) with outstanding photochromic property, waterproof, and breathability have attracted considerable interest owing to their multifunctional applications in intelligent clothing, self‐cleaning, and protection. However, great challenges still remain in creating such functional materials. A novel waterproof–breathable membrane with robust photochromic property is fabricated by introducing photochromic microcapsule (PM) into electrospun thermoplastic polyurethanes (TPU) membranes. Compared with the pristine TPU NFMs, the composite TPU/PM membranes are endowed with reversible photochromic properties. In addition, the composite membranes not only exhibited a water contact angle of 137° and a milk contact angle of 130°, but also had integrated properties of modest water vapor transmittance rate of 19,278 g m^?2 day^?1, high air permeability of 962 mm s^?1, low waterproofness of 2.813 kPa, and comparable tensile strength of 12.08 MPa. Furthermore, the convenience and efficiency of this fabrication process will allow for large‐scale production of the multifunctional NFMs. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46342.     

Synthesis of polymeric electrospun nanofibers for application in waterproof‐breathable fabrics

This study focuses waterproof‐breathable fabric development by applying electrospun web of polyurethane (PU), PAN, and PES directly onto the substrate fabric. Advantages of textile fabrics of elastomeric nanofibrous membranes over gortex specimen are the mass production feasibility, high elastomeric properties, more body comfort parameters, and fabric production without holes and needle traces formation. In this work, we identified the PU nanofibrous membrane as the best and useful web for application in waterproof‐breathable fabrics. Air permeability, water vapor transport rate, and resistance to water penetration average value for the prepared PU fibers web (sample of S1) were about 10 ml/s, 430 g/m²/24 h, 15 cm H₂O. To improve waterproof‐breathable characteristics of the membrane, the effects of electrospinning parameters on the fibers morphology and waterproof‐breathable characteristics were investigated. PU concentration of 12% (w/w) and electrospinning voltage of 12 kV were identified as optimal conditions to reach uniform and fine PU nanofibers formation without any beads. Air permeability, water vapor transport rate, and resistance to water penetration average value for the final sample were recorded as about 2.5 ml/s, 840 g/m²/24 h, and 44 cm H₂O, correspondingly. POLYM. ENG. SCI. 56:143–149, 2016. © 2015 Society of Plastics Engineers     

A waterproof and breathable nanofibrous membrane with thermal-regulated property for multifunctional textile application

In this work, a waterproof and breathable nanofibrous membrane with thermal-regulated performance and exhibits excellent mechanical property is fabricated by coaxial electrospinning. The fiber shell is consisted of polyvinylidene fluoride (PVDF) and polyvinyl butyral (PVB), and the core is octadecane. First, well-performed waterproof and breathable membranes are obtained by optimizing its morphology and pore structure. Then octadecane is loaded into the fibers in the form of core by coaxial electrospinning, though it gives the membranes a thermal regulating function, but the drawback is the sacrifice of overall properties. Thus, carbon nanotubes are loaded into the shell and studied, finally, the best membrane has a comprehensive performance with hydrostatic pressure of 59.2 kPa, water vapor transmission rate (WVTR) of 7.846 kg m⁻² d⁻¹, latent heat of 50.1 J g⁻¹, as well as excellent tensile strength of 20.2 MPa, which shows its certain reference significance to the synthesis of multifunctional membrane.     

High‐Selectivity Y2O3‐Doped SiO2 Nanocomposite Membranes for Gas Separation in Steam at High Temperatures

Asymmetric structures were fabricated by depositing Y₂O₃‐doped SiO₂ (Si/Y) membranes onto γ‐Al₂O₃ supported by tubular α‐Al₂O₃. The thickness of the Y₂O₃‐doped SiO₂ deposits was approximately 100 nm. The deposits/membranes have micropores with a pore diameter ~ <0.40–0.55 nm. Pore size distribution measurements were conducted directly on the membranes before and after hydrothermal treatment with a nano‐permporometer. The gas permeance properties of the membranes were measured in the temperature range 100°C–500°C. The Y‐doped SiO₂ membrane (Si/Y = 3/1) was found to exhibit asymptotically stable permeances of 2.39 × 10^?7 mol/m²/s/Pa for He and 6.19 × 10^?10 mol/m²/s/Pa for CO₂, with a high selectivity of 386 (He/CO₂) at 500°C for 20 h in the presence of steam. The Y‐doped silica membranes exhibit very high gas permeances for molecules with smaller kinetic diameters. The apparent activation energies of the H₂ permeance at 400°C were 24.2 ± 0.2 and 21.3 ± 0.7 kJ/mol for SiO₂ and Si/Y, respectively.     

Preparation of electrospun polyurethane/hydrophobic silica gel nanofibrous membranes for waterproof and breathable application

The polyurethane (PU)/hydrophobic silica gel (HSG) fibrous membranes with the hydrophobic and breathable surface was fabricated via electrospinning. By employing the HSG incorporation, mechanical properties, thermal stability, and waterproofness of the composite membranes could be improved. The porous structure of the membranes would be regulated by tuning the temperatures of thermal treatment. When HSG content increased to 3 wt%, the PU/HSG composite membranes possessed remarkable tensile strength of 6.3 MPa and high water contact angle (WCA) of 134°. Furthermore, the maximum WCA (142° ± 1°), good hydrostatic pressure (5.45 kPa), large water vapor transmission rate (8.05 kg/m²/day), and high air permeability (9.25 L/m²/s) of the composite membranes could be achieved by heat treatment at 120°C. The resultant membranes performed significantly better when compared to the pure PU membranes under the same conditions, such as the higher tensile strength (100%), better waterproofness (200%), and stronger breathablity (25%). POLYM. ENG. SCI., 58:1381–1390, 2018. © 2017 Society of Plastics Engineers     

Application of low loading of collagen in electrospun poly[(l‐lactide)‐co‐(ε‐caprolactone)] nanofibrous scaffolds to promote cellular biocompatibility

Electrospinning of various polymers has been used to produce nanofibrous scaffolds that mimic the extracellular matrix and support cell attachment for the potential repair and engineering of nerve tissue. In the study reported here, an electrospun copolymer of l ‐lactide and ε‐caprolactone (67:33 mol%) resulted in a nanofibrous scaffold with average fibre diameter and pore size of 476 ± 88 and 253 ± 17 nm, respectively. Blending with low loadings of collagen (<2.5% w/w) significantly reduced the average diameter and pore size. The uniformity of fibre diameter distributions was supported with increasing collagen loadings. The nanofibrous scaffolds significantly promoted the attachment and proliferation of olfactory ensheathing cells compared to cells exhibiting asynchronous growth. Furthermore, analysis of cell health through mitochondrial activity, membrane leakage, cell cycle progression and apoptotic indices showed that the nanofibrous membranes promoted cell vigour, reducing necrosis. The study suggests that the use of more cost‐effective, low loadings of collagen supports morphological changes in electrospun poly[(l ‐lactide)‐co‐(ε‐caprolactone)] nanofibrous scaffolds, which also support attachment and proliferation of olfactory ensheathing cells while promoting cell health. The results here support further investigation of the electrospinning of these polymer blends as conduits for nerve repair. © 2013 Society of Chemical Industry     

High‐performance composite nanofiltration membranes fabricated via ternary mixture: Complementary preponderance of the fluorine‐containing monomer 2,2′‐bis(1‐hydroxyl‐1‐trifluoromethyl‐2,2,2‐triflutoethyl)‐4,4′‐methylene dianiline and the rigid monomer bisphenol F

In a previous study, we proved that tailoring the polyamide backbone stiffness is an effective way to fabricate high‐performance polyamide nanofiltration (NF) membranes. However, in the previous study, we mainly focused on the flat membrane and did not consider its chlorine tolerance. In this study, by regulating the aqueous‐phase compositions in the interfacial polymerization process, chlorine tolerance on NF hollow‐fiber membranes was endowed while the membrane performance stayed high. The experimental results show that when the ratio of Piperazine (PIP)–bisphenol F (BPF)/2,2′‐bis(1‐hydroxyl‐1‐trifluoromethyl‐2,2,2‐triflutoethyl)‐4,4′‐methylene dianiline (BHTTM) was 5:1:4, the NF membrane possessed a permeate flux of 21.0 L m^?2 h^?1 bar^?1 and an Na₂SO₄ rejection up to 90.0%. X‐ray photoelectron spectroscopy analysis also confirmed that the polymerization degree of the PIP–BPF–BHTTM NF membrane was the highest. Moreover, the NF membrane could tolerate active chlorine to over 10,000 ppm h Cl. After the active chlorine treatment, the permeate flux increased over 30.0 L m^?2 h^?1 bar^?1, and the Na₂SO₄ rejection was about 90.0%. Although the PIP–BHTTM NF membrane also possessed good chlorine tolerance, its permeate flux (after active chlorine treatment) was only 60% of that of the PIP–BPF–BHTTM NF membrane. Therefore, the PIP–BPF–BHTTM NF membrane possessed a combination of high flux and high chlorine tolerance and showed good potential in water treatment in rigorous environments. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46482.     

Three‐component mixed matrix organic/inorganic hybrid membranes for pervaporation separation of ethanol–water mixture

Mixed matrix membranes (MMMs) were made by incorporating vinyltrimethoxysilane (VTMS)‐modified Silicalite‐1 zeolite nanoparticles (V‐Silicalite‐1 NPs) into fluorinated polybenzoxazine (F‐PBZ) modified polydimethylsiloxane (PDMS) polymer through in situ polymerization method. The membrane morphology, surface wettability, and pervaporation performance were systematically investigated. The addition of F‐PBZ into PDMS membranes resulted in substantially improved flux and marginal increase of separation factor, which is the result of higher free volume and higher hydrophobicity caused by the addition of F‐PBZ. The modification of Silicalite‐1 NPs improved the interfacial contact between zeolite crystals and polymer phase. The incorporation of hydrophobic V‐Silicalite‐1 zeolite NPs into the PDMS membranes led to much higher separation factor but reduced flux, which is the result of increased hydrophobicity and reduced free volume. The three‐component MMMs with V‐Silicalite‐1 zeolite NPs in the F‐PBZ fluorinated PDMS exhibited separation factor of 28.7 and flux of 0.207 kg m^?2 h^?1 for 5 wt % ethanol aqueous solution at 50 °C, while the pure PDMS membranes only had separation factor of 4.8 and flux of 0.088 kg m^?2 h^?1. The substantial increase of both flux and separation factor were attributed to the higher hydrophobicity and free volume caused by the incorporation of both hydrophobic zeolite crystals and F‐PBZ polymer into the PDMS membranes. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 44753.     

Preparation of high‐performance zeolite NaA membranes in clear solution by adding SiO2 into Al2O3 hollow‐fiber precursor

Zeolite NaA membranes were prepared in a clear synthesis solution without the aid of nanoseeds. To improve the properties of the membranes formed in a clear solution, alumina hollow fibers were fabricated by adding silica powder to the conventional spinning slurry, resulting in hollow fibers with a mullite phase. Prior to the membrane synthesis, the hollow fibers were pretreated by dipping in an aged synthesis solution diluted with isopropanol. Dense zeolite NaA membranes on mullite‐containing alumina hollow fibers were successfully obtained at 100°C for 2 h without the aid of nanoseeds. The membranes have a good pervaporation performance with a high flux of 10.8 kg m^?2 h^?1 and a separation factor of over 10,000. The abundant mullite‐phase hydroxyl groups on the support surface promote the nucleation and growth of zeolite crystals on the support, resulting in dense membranes. © 2018 American Institute of Chemical Engineers AIChE J, 64: 2679–2688, 2018     

Immobilization of catalases on amidoxime polyacrylonitrile nanofibrous membranes

Amidoxime polyacrylonitrile (AOPAN) nanofibrous membranes were generated by the reaction between electrospun polyacrylonitrile nanofibrous membranes and hydroxylamine hydrochloride. AOPAN nanofibrous membranes were further modified by Fe(III) chelation for immobilizing catalases with coordination bonds. The surface morphologies of the nanofibrous membranes and immobilized catalases were observed by field emission scanning electron microscopy. Chelation of Fe(III) onto AOPAN nanofibrous membranes was studied by the Langmuir isothermal adsorption model. It was found that the maximum amount of coordinated Fe(III) (q_m) was 4.5045 mmol g^?1 (dry nanofibrous membranes) and the binding constant (K_l) was 0.0698 L mmol^?1. The amounts of immobilized enzymes were determined by the method of Bradford. Kinetic parameters were analyzed for both immobilized and free catalases. The value of V_max (7122.6 µmol mg^?1 min^?1) for the immobilized catalases was smaller than that for the free catalases (9203.2 µmol mg^?1 min^?1), and the K_m for the immobilized catalases was larger. The immobilized catalases showed better resistance to pH and temperature change than the free catalases, and the storage stability of immobilized catalases was higher than that of free catalases. As for reusability, the immobilized catalases retained 71% of their activity after eight repeated uses. © 2012 Society of Chemical Industry     

Electrospun poly(vinylidene‐fluoride)/POSS nanofiber membrane‐based polymer electrolytes for lithium ion batteries

In this study, poly(vinylidene fluoride) (PVDF)/polyhedral oligomeric silsesquioxanes (POSS) nanofibrous membranes are prepared through electrospun process. Field emission scanning electron microscope images clearly show that PVDF/POSS membranes have interconnected multi fibrous layers with ultrafine porous structures. The average fiber diameter and crystallinity of PVDF/POSS membranes are lesser than that of pure PVDF membrane. Thermal stability and electrolyte uptake of blend membranes increase with increasing POSS content. Finally, PVDF/POSS membranes are soaked in a liquid electrolyte to form the polymer electrolytes and are assembled in coin cells to test their electrochemical properties such as ionic conductivity, interfacial characteristics, and electrochemical stability windows. The ionic conductivity improves with increasing POSS content and the highest ionic conductivity reaches 2.91 × 10⁻³ S/cm at room temperature. It is also worth mention that the composite polymer electrolytes show low interfacial resistance and high electrochemical stability window of 5.6 V (vs. Li⁺ /Li) with storage time. POLYM. COMPOS., 38:629–636, 2017. © 2015 Society of Plastics Engineers     

Modified polydimethylsiloxane/polystyrene blended IPN pervaporation membrane for ethanol/water separation

In this article a modified polydimethylsiloxane (PDMS) blended polystyrene (PS) interpenetrating polymer network (IPN) membranes supported by Teflon (polytetrafluoroethylene) ultrafiltration membrane were prepared for the separation of ethanol in water by pervaporation application. The relationship between the surface characteristics of the surface‐modified PDMS membranes and their permselectivity for aqueous ethanol solutions by pervaporation are discussed. The IPN supported membranes were prepared by sequential IPN technique. The IPN supported membrane were tested for the separation performance on 10 wt % ethanol in water and were characterized by evaluating their mechanical properties, swelling behavior, density, and degree of crosslinking. The results indicated that separation performance, mechanical properties, density, and the percentage of swelling of IPN membranes were influenced by degree of crosslink density. Depending on the feed temperature, the supported membranes had separation factors between 2.03 and 6.00 and permeation rates between 81.66 and 144.03 g m^?2 h^?1. For the azeotropic water–ethanol mixture (10 wt % ethanol), the supported membrane had at 30°C a separation factor of 6.00 and a permeation rate of 85 g m^?2 h^?1. Compared to the PDMS supported membranes, the PDMS/PS IPN supported blend membrane ones had a higher selectivity but a somewhat lower permeability. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis and properties of polyurethane‐urea‐based liquid bandage materials

To obtain ideal liquid bandage polymer materials, a series of polyurethane‐urea dispersions were synthesized from 4,4′‐diisocyanato dicyclohexylmethane (H₁₂MDI) and ethylene diamine with different molar ratio of polyol blend [polyethylene glycol (PEG, M_n = 2000 g/mol)/hydroxy terminated poly(dimethylsiloxane) (PDMS, M_n = ～ 550 g/mol)] and acetone/ethanol as a solvent. The effect of PDMS content in PEG/PDMS on the viscosity, mechanical properties, water contact angle/surface energy, insolubility in water (%), water absorption (%), equilibrium water content (%), and water vapor transmission rate (g m^?2 day^?1) of polyurethane‐urea films was investigated. As PDMS content increased, the water contact angle, insolubility in water, and tensile strength/elastic recovery of film sample increased; however, the surface energy, water absorption (%), equilibrium water content (%), and water vapor transmission rate (g m^?2 day^?1) of film sample decreased. By a wound‐healing evaluation using a full‐thickness rat model experiment, it was found that a wound covered with a typical polyurethane‐urea liquid bandage film (PD2 sample) was filled with new epithelium without any significant adverse reactions. These results suggest that the polyurethane‐urea‐based liquid bandages (samples: PD2 and PD3) prepared in this study may have high potential as new wound dressing materials, which provide and maintain the adequate wet environment required to prevent scab formation and dehydration of the wound bed. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Novel imidazole‐grafted hybrid anion exchange membranes based on poly(2,6‐dimethyl‐1,4‐phenylene oxide) for fuel cell applications

Novel organic–inorganic hybrid membranes, based on poly(2,6‐dimethyl‐1,4‐phenylene oxide), have been prepared through 1,2‐dimethylimidazole functional groups and double crosslinking agents including 3‐glycidyloxypropyltrimethoxysilane and tetraethyl orthosilicate by sol–gel process for the purpose of improving the conductivity and alkaline resistance. The structure of membranes was characterized using Fourier‐transform infrared spectra, ¹H NMR, and X‐ray diffraction. The physico‐chemical properties of all membranes were shown in ion exchange capacity, water uptake, stability, and conductivity. Membranes with OH^– conductivity up to 0.022 at 25 °C and 0.036 S cm^?1 at 80 °C. Promisingly, the chemical stability of the resulting membranes remains unchanged after storage in 2 mol dm^?3 KOH at 25 °C over at least 10 days. The tensile strength can be higher than 30 MPa, and the elongation at break (Eb) is in the range 6.68–10.84%. Hence, this hybrid membrane can be potentially applied in alkaline fuel cells. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46034.     

Surface modification of UHMWPE/fabric composite membrane via self‐polymerized polydopamine followed by mPEG‐NH2 immobilization

In this work, a novel approach to improve the antifouling properties of membrane surfaces was developed. First, a polydopamine layer was attached onto the surface of an ultrahigh molecular weight polyethylene/fabric composite microporous membrane based on dopamine self‐polymerization and adhesive behavior. Then, methoxy polyethylene glycol amine was covalently bonded with the polydopamine layer via a Schiff base reaction. The physicochemical properties of the modified composite membrane surface were investigated, and the results indicated this modification could effectively enhance the membrane surface hydrophilicity. Furthermore, the protein fouling resistance of both dopamine‐coated and methoxy polyethylene glycol amine immobilized composite membranes was evaluated. It was found that a dopamine coating cannot obviously enhance the membrane antifouling properties due to its strong bioadhesion behavior. However, the antifouling properties of the composite membranes were significantly improved after being immobilized with a methoxy polyethylene glycol amine layer. Consequently, a layer‐by‐layer modified composite membrane with excellent antifouling property was obtained. The pure water flux and flux recovery ratio of the resultant membrane were 764 L m^?2 h^?1 and 83%, respectively. The aim of this paper was to provide an effective approach to optimizing the separation efficiency and antifouling performance of the ultrahigh molecular weight polyethylene/fabric composite membrane. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46428.     

Study of the partial wetting morphology in polylactide/poly[(butylene adipate)‐co‐terephthalate]/polyamide ternary blends: case of composite droplets

The prediction of the morphology of ternary polymer blends requires a good knowledge of the values of the three interfacial tensions. We selected three polymers, either biobased or biodegradable, polyamide (PA), poly[(butylene adipate)‐co‐terephthalate] (PBAT) and polylactide (PLA), and we accurately measured their interfacial tensions using the retraction method, varying the molar mass or inverting the phases. The following values of interfacial tension were obtained: γ_PBAT/PLA = 3.3 ± 0.7 mN m^?1, γ_PA/PLA = 5.6 ± 0.3 mN m^?1 and γ_PBAT/PA = 3.0 ± 0.4 mN m^?1. These values were used to calculate the spreading coefficients giving rise to two negative coefficients and one coefficient close to zero. Ternary blends with various compositions, two different levels of viscosity for PBAT and different processing conditions were prepared. There was a very good agreement between the predictions of the spreading theory, when using the values of interfacial tension of the right order of magnitude, and the observed morphologies, whatever the polymer serving as a matrix. When PLA or PBAT was chosen as the matrix, the ternary blend morphology was composed of composite droplets, presenting a partial wetting morphology, dispersed in the polymer matrix. This morphology was observed whatever the composition, the viscosity of the PBAT phase and the processing conditions. A further calculation of the free energy confirmed this morphology. The formation process of this semi‐encapsulated morphology was observed during blending. © 2018 Society of Chemical Industry     

Novel PDMS‐based membranes: Sodium chloride and glucose permeability

Permeation of sodium chloride and glucose through polydimethylsiloxane‐poly(N‐isopropylacrylamide) (PDMS‐PNIPAAm) interpenetrating polymer networks (IPNs) of two different microstructures was investigated. We have successfully developed small‐molecule permeable IPNs, by modifying PDMS film structure. A group of PDMS films was prepared using conventional solvent casting (SC) method and another group produced by introducing oil, followed by SC and leaching the oil out (SCOL method). Scanning electron microscopy (SEM) and attenuated total reflection fourier transformer infrared (ATR‐FTIR) spectroscopy results confirmed the presence of PNIPAAm in the SC and SCOL IPNs. Results obtained from spectra of differential scanning calorimetry (DSC) showed that these IPNs had a phase transition temperature at about 32°C. Permeation measurements showed that the presence of PNIPAAm as the second phase in the IPN, improved the permeability of PDMS film. According to the results, maximum permeation coefficient was related to SCOL IPN containing 15.8% ± 0.3%PNIPAAm, at 23°C (5.98 × 10^?7 ± 7.93 × 10^?9 cm²/s for sodium chloride and 3.6 × 10^?7 ± 7 × 10^?9 cm²/s for glucose). These results suggested that these PDMS‐PNIPAAm IPNs with sodium chloride and glucose permeability may be further developed as ophthalmic biomaterials or corneal replacements. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Electrospun poly(lithium 2‐acrylamido‐2‐methylpropanesulfonic acid) fiber‐based polymer electrolytes for lithium‐ion batteries

Novel single‐ion conducting polymer electrolytes based on electrospun poly(lithium 2‐acrylamido‐2‐methylpropanesulfonic acid) (PAMPSLi) membranes were prepared for lithium‐ion batteries. The preparation started with the synthesis of polymeric lithium salt PAMPSLi by free‐radical polymerization of 2‐acrylamido‐2‐methylpropanesulfonic acid, followed by ion‐exchange of H⁺ with Li⁺. Then, the electrospun PAMPSLi membranes were prepared by electrospinning technology, and the resultant PAMPSLi fiber‐based polymer electrolytes were fabricated by immersing the electrospun membranes into a plasticizer composed of ethylene carbonate and dimethyl carbonate. PAMPSLi exhibited high thermal stability and its decomposition did not occur until 304°C. The specific surface area of the electrospun PAMPSLi membranes was raised from 9.9 m²/g to 19.5 m²/g by varying the solvent composition of polymer solutions. The ionic conductivity of the resultant PAMPSLi fiber‐based polymer electrolytes at 20°C increased from 0.815 × 10^?5 S/cm to 2.12 × 10^?5 S/cm with the increase of the specific surface area. The polymer electrolytes exhibited good dimensional stability and electrochemical stability up to 4.4 V vs. Li⁺/Li. These results show that the PAMPSLi fiber‐based polymer electrolytes are promising materials for lithium‐ion batteries. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Preparation and characterization of nanohydroxyapatite strengthening nanofibrous poly(L‐lactide) scaffold for bone tissue engineering

A biomimetic nanofibrous poly(L ‐lactide) scaffold strengthened by nanohydroxyapatite particles was fabricated via a thermally induced phase separation technique. Scanning electron microscopy results showed that nanohydroxyapatite particles uniformly dispersed in the nanofibrous poly(L ‐lactide) scaffold (50–500 nm in fiber diameter) with slight aggregation at a high nHA content, but showed no influence on the interconnected macroporous and nanofibrous structure of the scaffold. The nanofibrous poly(L ‐lactide) scaffold presented a specific surface area of 34.06 m² g^?1, which was much higher than that of 2.79 m² g^?1 for the poly(L ‐lactide) scaffold with platelet structure. Moreover, the specific surface area of the nanofibrous scaffold was further enhanced by incorporating nanohydroxyapatite particles. With increasing the nanohydroxyapatite content, the compressive modulus and amount of bovine serum albumin adsorbed on the surface of the nanofibrous composite scaffold were markedly improved, as opposed to the decreased crystallinity. In comparison to poly(L ‐lactide) scaffold, both the nanofibrous poly(L ‐lactide) and poly(L ‐lactide)/nanohydroxyapatite scaffolds exhibited a faster degradation rate for their much larger specific surface area. The culture of bone mesenchymal stem cell indicated that the composite nanofibrous poly(L ‐lactide) scaffold with 50 wt % nanohydroxyapatite showed the highest cells viability among various poly(L ‐lactide)‐based scaffolds. The strengthened biomimetic nanofibrous poly(L ‐lactide)/nanohydroxyapatite composite scaffold will be a potential candidate for bone tissue engineering. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013