Lead removal from water using organic acrylic amine fiber (AAF) and inorganic-organic P-AAF, fixed bed filtration and surface-induced precipitation

Granular porous sorbents were normally used for heavy metals removal from water. To search for the new commercial sorbent and treatment strategy, an organic acrylic amine fiber (AAF) and phosphorus loading inorganic-organic AAF (P-AAF) were prepared and used for lead (Pb) removal from water. A new strategy of inorganic-organic coupling technology was proposed for Pb removal, based on the hypothesis of surface-induced precipitation mechanism. The AAF showed a Pb adsorption capacity of 417 mg/g from the Langmuir fitting, while the column filtration technology was further applied to measure the adsorption edge and applications. Effects of different initial Pb concentrations, hydraulic retention time, and co-existing P were considered in the filtration experiments. The presence of 0.8 mg/L P in water significantly improved the Pb breakthrough point from 15,000 to 41,000 bed volumes of water spiked with 85 µg/L Pb, while the P-AAF fixed bed showed better removal of Pb than AAF SEM/EDX and XRD spectra were employed for determining the surface functional groups and the formation of surface-induced precipitation of pyromorphite (Pb₅(PO₄)₃OH) on AAF. This study verified the application of AAF sorbent for Pb removal and the enhanced effect of coating P on AAF, thus improved our fundamental understanding and application of the surface chemistry process of Pb with P.     

Enhanced removal of high-As(Ⅲ) from Cl(-Ⅰ)-diluted SO4(-Ⅱ)-rich wastewater at pH 2.3 via mixed tooeleite and(Cl(-Ⅰ)-free) ferric arsenite hydroxychloride formation

An advanced cost-saving method of removal of high-As(Ⅲ) from SO₄(-Ⅱ)-rich metallurgi cal wastewater has been developed by diluting the SO₄(-Ⅱ) content with As(Ⅲ)-Cl(-Ⅰ)-rich metallurgical wastewater and then by the direct precipitation of As(Ⅲ) with Fe(Ⅲ) at pH2.3.As(Ⅲ) removal at various SO₄(-Ⅱ)/Cl(-Ⅰ) molar ratios and temperatures was investigated The results showed that 65.2–98.2%of As(III) immobilization into solids occurred at the SO₄(Ⅱ)/Cl(-Ⅰ) mo...     

Highly efficient and selective removal of low-concentration antibiotics from aqueous solution by regenerable Mg(OH)2

The prevalent presence of fluoroquinolone antibiotics in aquatic environments has attracted considerable attention because of their harmful effects on humans and the ecological environment.Magnesium hydroxide nanocrystals were found to act as a simple and effective adsorbent to remove low-concentration ciprofloxacin(CIP) in aqueous solution.The as-prepared Mg(OH)₂ nanocrystals exhibited excellent CIP adsorption performance and high selectivity toward CIP molecules compared with other ...     

Simultaneous removal of SO2 and NO using a spray dryer absorption (SDA) method combined with O3 oxidation for sintering/pelleting flue gas

Based on the demand of sintering/pelleting flue gas ultra-low emission,a semi-dry method using a spray dryer absorber (SDA) combined with O₃ oxidation was proposed for simultaneous removal of SO₂ and NO.Effects of O₃ injection site,O₃/NO molar ratio,and spray tower temperature on the removal efficiencies were investigated.It was revealed that both desulfurization and denitrification efficiencies could reach to 85%under the conditions of setting O_3...     

Surface protection method for the magnetic core using covalent organic framework shells and its application in As(III) depth removal from acid wastewater

Fe₃O₄-based materials are widely used for magnetic separation from wastewater. However, they often suffer from Fe-leaching behavior under acidic conditions, decreasing their activity and limiting sustainable practical applications. In this study, covalent organic frameworks (COFs) were used as the shell to protect the Fe₃O₄ core, and the Fe₃O₄@COF core-shell composites were synthesized for As(III) removal from acid wastewater. The imine-linked COFs can in situ grow on the surface of the Fe₃O₄ core layer by layer with [COFs/Fe₃O₄]_mol ratio of up to 2:1. The Fe-leaching behavior was weakened over a wide pH range of 1-13. Moreover, such composites keep their magnetic characteristic, making them favorable for nanomaterial separation. As(III) batch adsorption experiments results indicated that, when COFs are used as the shell for the Fe₃O₄ core, a balance between As(III) removal efficiencies and the thickness of the COF shell exists. Higher As(III) removal efficiencies are obtained when the [COFs/Fe₃O₄]_mol ratios were < 1.5:1, but thicker COF shells were not beneficial for As(III) removal. Such composites also exhibited better As(III) removal performances in the pH range of 1–7. Over a wide pH range, the zeta potential of Fe₃O₄@COF core-shell composites becomes more positive, which benefits the capture of negative arsenic ions. In addition, thinner surface COFs were favorable for mass transfer and facilitating the reaction of Fe and As elements. Our study highlights the promise of using COFs in nanomaterial surface protection and achieving As(III) depth removal under acidic conditions.     

Phosphorus removal from sediments by Potamogeton crispus: New high-resolution in-situ evidence for rhizosphere assimilation and oxidization-induced retention

Macrophytes are usually chosen for phytoremediation tools to remove P in eutrophic aquatic ecosystems, but the lack of test methods hinders the understanding of removal mechanism and application. In this study, we used the novel technologies combined of Diffusive gradients in thin films (DGT), Planar optode (PO), and Non-invasive micro-test technology (NMT) to explore P dynamics in water-sediment continuum and rhizosphere of Potamogeton crispus over time. Results of the high-resolution in situ measurement showed that labile P(LP_DGT) fluxes at the surficial sediment significantly decreased from approximate 120, 140, and 200 pg/ (cm²?sec) via 30 days incubation period to 17, 40, and 56 pg/(cm²?sec) via that of 15 days. Obvious synchronous increase of LP_DGT was not detected in overlying water, suggesting the intense assimilation of dissolve reactive P via root over time. PO measurement indicated that O₂ concentration around the rhizosphere remarkably increased and radially diffused into deeper sediment until 100% saturation along with the root stretch downwards. NMT detection of roots showed the obvious O₂ inflow into root tissue with the uppermost flux of 30 pmol/(cm²?sec) from surroundings via aerenchyma on different treatment conditions. Different from previous reports, gradually saturating O₂ concentrations around the rhizosphere was principally driven by O₂ penetration through interspace attributing to root stretch downward rather than root O₂ leakage. Increased O₂ concentrations in deep sediment over time finally induced the oxidization of labile Fe(II) into Fe(III) bound P and local P immobilization.     

Selective recovery of Cu(II) from strongly acidic wastewater by zinc dimethyldithiocarbamate: Affecting factors, efficiency and mechanism

The selective recovery of copper from strongly acidic wastewater containing mixed metal ions remains a significant challenge. In this study, a novel reagent zinc dimethyldithiocarbamate (Zn(DMDC)₂) was developed for the selective removal of Cu(II). The removal efficiency of Cu(II) reached 99.6% after 120 min reaction at 30°C when the mole ratio Zn(DMDC)₂/Cu(II) was 1:1. The mechanism investigation indicates that the Cu(DMDC)₂ products formed as a result of the displacement of Zn(II) from the added Zn(DMDC)₂ by Cu(II) in wastewater, due to the formation of stronger coordination bonds between Cu(II) and the dithiocarbamate groups of Zn(DMDC)₂. Subsequently, we put forward an innovative process of resource recovery for strongly acidic wastewater. Firstly, the selective removal of Cu(II) from actual wastewater using Zn(DMDC)₂, with a removal efficiency of 99.7%. Secondly, high-value CuO was recovered by calcining the Cu(DMDC)₂ at 800°C, with a copper recovery efficiency of 98.3%. Moreover, the residual As(III) and Cd(II) were removed by introducing H₂S gas, and the purified acidic wastewater was used to dissolve ZnO for preparation of valuable ZnSO₄·H₂O. The total economic benefit of resource recovery is estimated to be 11.54 $/m³. Accordingly, this study provides a new route for the resource recovery of the treatment of copper-containing acidic wastewater.     

Interactions between lead(II) ions and dissolved organic matter derived from organic fertilizers incubated in the field

This work was to study composition characteristics and the subsequent effect on the lead (Pb) binding properties of dissolved organic matter (DOM) derived from seaweed-based (SWOF) and chicken manure organic fertilizers (CMOF) during a one-year field incubation experiment using the excitation-emission matrix-parallel factor (EEM-PARAFAC) and two-dimensional correlation spectroscopy (2DCOS) analysis. Results showed that high aromatic and hydrophobic fluorescent substances were enriched in CMOF-derived DOM and SWOF-derived DOM and enhanced over time. And phenolic groups in the fulvic-like substances for SWOF-derived DOM and carboxyl groups in the humic-like substances for CMOF-derived DOM had the fastest responses over time, respectively. Moreover, both non-fluorescent polysaccharides and fluorescent humic-like substances or fulvic-like substances with aromatic (C=C) groups first participated in the binding process of Pb to SWOF-derived DOM on day 0 and 180 during the lead binding process. In contrast, humic-like substances associated with aromatic (C=C) and phenolic groups gave a faster response to Pb binding on day 360. Regarding CMOF-derived DOM, the fulvic-like substances associated with aromatic (C=C) and carboxylic groups displayed a faster response to Pb ions on day 0. Nonetheless, polysaccharides and humic-like associated with phenolic groups had a faster response on days 180 and 360. It is noteworthy that the polysaccharides, which participated in Pb binding to CMOF-derived DOM, posed a higher risk of Pb in the environment after 360 days. Therefore, these findings gave new insights into the long-term applications of commercial organic fertilizers for the amendment of soil.     

Phosphate removal by a La（OH）3 loaded magnetic MAPTAC-based cationic hydrogel: Enhanced surface charge density and Donnan membrane effect

Cationic hydrogels have receive d great attention to control eutrophication and recycle phosphate.In this study,a type of La（OH）₃ loaded magnetic MAPTAC-based cationic hydrogel(La（OH）₃@MMCH) was developed as a potential adsorbent for enhanced phosphate removal from aqueous environment.La（OH）₃@MMCH exhibited high adsorption capacity of105.72±5.99 mg P/g,and reached equilibrium within 2 hr.La（OH）₃@MMCH could perform effectively in a wide pH range from 3....     

Photocatalytic reduction of Cr(VI) over cinder-based nanoneedle in presence of tartaric acid: Synergistic performance and mechanism

Cr(VI) is a common heavy metal ion, which will seriously harm human body and environment. Therefore, the removal of Cr(VI) has become an attractive topic. In this work, cinder was used as a raw material to synthesize a nanoneedle material: γ-([email protected]) (γ[email protected]). The physicochemical properties of γ[email protected] were thoroughly characterized, and its effectiveness as a catalyst for photocatalytic reduction of Cr(VI) was evaluated. The results showed that Cr(VI) could be efficiently reduced by γ[email protected] in the presence of tartaric acid (TA) under visible light. The variable factors on the reaction were investigated in detail, and the results showed that under optimal conditions (γ[email protected] 0.4 g/L, TA 0.6 g/L, pH 2), Cr(VI) was completely reduced within 7 min. Besides, scavenger experiments and EPR proved that O₂^{? —} and CO₂^{? —} played a significant role in the photocatalytic reduction of Cr(VI). TA acts as a sacrificial agent to trap the holes and generate strong reducing free radicals: CO₂^{? —}. Dissolving O₂ could react with electrons to generate O₂^{? —}. This work discussed the performance and mechanism of photocatalytic reduction of Cr(VI) in detail, which provided a new idea for the resource utilization of solid waste and the treatment of heavy metal sewage.     

Efficient photocatalysis of tetracycline hydrochloride (TC-HCl) from pharmaceutical wastewater using AgCl/ZnO/g-C3N4 composite under visible light: Process and mechanisms

AgCl/ZnO/g-C₃N₄, a visible light activated ternary composite catalyst, was prepared by combining calcination, hydrothermal reaction and in-situ deposition processes to treat/photocatalyse tetracycline hydrochloride (TC-HCl) from pharmaceutical wastewater under visible light. The morphological, structural, electrical, and optical features of the novel photocatalyst were characterized using scanning electron microscopy (SEM), UV-visible light absorption spectrum (UV–Vis DRS), X-ray diffractometer (XRD), Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), and transient photocurrent techniques. All analyses confirmed that the formation of heterojunctions between AgCl/ZnO and g-C₃N₄ significantly increase electron-hole transfer and separation compared to pure ZnO and g-C₃N₄. Thus, AgCl/ZnO/g-C₃N₄ could exhibit superior photocatalytic activity during TC-HCl assays (over 90% removal) under visible light irradiation. The composite could maintain its photocatalytic stability even after four consecutive reaction cycles. Hydrogen peroxide (H₂O₂) and superoxide radical (^·O₂) contributed more than holes (h⁺) and hydroxyl radicals (^·OH) to the degradation process as showed by trapping experiments. Liquid chromatograph-mass spectrometer (LC-MS) was used for the representation of the TC-HCl potential degradation pathway. The applicability and the treatment potential of AgCl/ZnO/g-C₃N₄ against actual pharmaceutical wastewater showed that the composite can achieve removal efficiencies of 81.7%, 71.4% and 69.0% for TC-HCl, chemical oxygen demand (COD) and total organic carbon (TOC) respectively. AgCl/ZnO/g-C₃N₄ can be a prospective key photocatalyst in the field of degradation of persistent, hardly-degradable pollutants, from industrial wastewater and not only.