A novel stair-like lithium coordination polymer constructed from 4,4′-bipyridine

A novel stair-like lithium coordination polymer Li₂(4,4′-bpy)₂(NO₃)₂, 1, has been synthesized by using standard Schlenk techniques. X-ray diffraction shows the 2D stair-like framework contains an approximately perpendicular 1D “Z” type Li-4,4′-bpy chain and an unprecedented Li–NO₃ chain.     

Synthesis and characterization of novel benzhydrol-containing poly(amide-imide)s

A series of novel benzhydrol-containing poly(amide-imide)s (PAIs) have been prepared from a new diimide-dicarboxylic acid, N,N′-bis(4-hydroxycarbonyl)-benzhydrol-3,3′,4,4′-tetracarboxydiimide (BHTDA-DIA), with various diamines by direct polycondensation using triphenyl phosphite and pyridine as condensing agents. The polymers obtained had inherent viscosities of 0.35–0.96 dl g⁻¹. All these PAIs, except polymer PAI-2, were soluble in N-methyl-2-pyrrolidinone and N,N-dimethylacetamide containing LiCl (1 wt%). Tough and flexible PAI films could be obtained by casting PAIs from their DMAc or NMP solutions, except for polymer PAI-2. The polymer films had a tensile strength of 93–111 MPa, an elongation at break range of 4–6%, and an initial modulus range of 2.7–3.8 GPa. The glass transition temperatures of most polymers were found to be above 255 °C. These polymers were fairly stable up to a temperature around or above 400 °C, and lost 10% weight in the range 426–507 °C in nitrogen and 423–515 °C in air. © 1999 Society of Chemical Industry     

The preparation and properties of segmented‐chain liquid crystalline polyesters based on 4,4′‐dihydroxybiphenyl by interfacial polycondensation

Thermotropic homopolyesters were prepared through interfacial polycondensation of 4,4′‐dihydroxybiphenyl with sebacoyl chloride. The optimal conditions of the process, in terms of the best yield, were studied through investigating the type of organic phase, amount of phase transfer agent, time and temperature of reaction, and volume ratio of aqueous to organic phase. The structure of the sample that had the best yield (53.235% ± 5%) was determined by means of elemental analysis, infrared spectra, and X‐ray. The effect of the molar ratio of the monomers on the yield and inherent viscosity was investigated. The inherent viscosity of the samples varied between 0.095 and 0.25 dL/g. The mesophase formed at elevated temperatures was studied by differential scanning calorimetry, polarized light microscopy, and depolarizing transmittance measurements. Our observations revealed that poly(4, 4′‐diphenyl sebacate), in contrast to previous reports that suggest this polymer is smectgenic, could produce nematic phase. It could be concluded that the chemical structure ordering of the poly(4, 4′‐diphenyl sebacate) plays a significant role in its liquid crystalline behavior. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 1594–1606, 2005     

Study on Terahertz Time‐Domain Spectroscopy of HNS by Sample Measure and Quantum Chemistry Calculation

The absorption spectra of 2,2′,4,4′,6,6′‐Hexanitrostilbene (HNS), in the frequency range between 0.2 and 4.0 THz, are calculated using quantum chemistry calculations and resulted in 1.9 THz and 3.3 THz. The experimental result offered by THz time‐domain spectroscopy and FTIR shows that the characteristic peaks are located at 1.7 THz and 3.1 THz. Compared with experimental results, all the evidences indicate that HNS has distinct characteristic peaks, which agree with the simulation results. It is believed that this method can detect this material quickly and accurately, which means a lot to the explosives detection.     

Synthesis and characterization of novel star polymer with β‐cyclodextrin core and its metal complexes

A novel star polymer with β‐cyclodextrin (β‐CD) core and polyacrylonitrile arms and its metal complexes (Cu²⁺, Zn²⁺, and Ag⁺) were synthesized and characterized by means of infrared spectra, ultraviolet, GPC, X‐ray photoelectron spectroscopy, differential scanning calorimetry, cyclic voltammetry, and electron spin resonance. The results indicate that the monomers of acrylonitrile were initiated by functionalized β‐CD. The thermal properties of star polymer were improved greatly after transitional metal ions were introduced into it. The novel star polymer metal complexes possess properties of metal ions, polymer, and β‐CD. Furthermore, it shows stable electrochemical activity. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Impregnation synthesis of a novel macroporous silica-based crown ether polymeric material modified by 1-dodecanol and its adsorption for strontium and some coexistent metals

4,4′,(5′)-Di-(tert-butylcyclohexano)-18-crown-6(DtBuCH18C6) is a chelating agent having high selectivity mostly for Sr(II). To significantly reduce its leakage by molecular modification, a macroporous silica-based DtBuCH18C6 polymeric composite (DtDo/SiO₂–P) was synthesized. It was performed by impregnating and immobilizing DtBuCH18C6 and 1-dodecanol molecules into the pores of the SiO₂–P particles utilizing an advanced vacuum sucking technique. The adsorption of a few fission and non-fission products Sr(II), Ba(II), Cs(I), Ru(III), Mo(VI), Na(I), K(I), Pd(II), La(III), and Y(III) onto DtDo/SiO₂–P was investigated. It was done by examining the effects of contact time and the HNO₃ concentration in a range of 0.1–5.0 M at 298 K. At the optimum concentration of 2.0 M HNO₃, DtDo/SiO₂–P exhibited strong adsorption ability and high selectivity for Sr(II) great over all of the tested elements, which showed very weak or almost no adsorption except Ba(II). Meanwhile, It was found that the quantity of total organic carbon (TOC) leaked from DtDo/SiO₂–P in 2.0 M HNO₃, 187.5 ppm, was lower than 658.4 ppm that leaked from DtBuCH18C6/SiO₂–P, which was not modified. This was ascribed to the effective association of DtBuCH18C6 and 1-dodecanol through intermolecular interaction. The reduction of DtBuCH18C6 leakage by molecular modification with 1-dodecanol was achieved. It was of great benefit to application of DtDo/SiO₂–P in chromatographic partitioning of Sr(II), one of the main heat generators, from high level liquid waste (HLLW) in reprocessing of nuclear spent fuel in the MAREC (Minor Actinides Recovery from HLLW by Extraction Chromatography) process developed recently.     

Two novel Zn(II) coordination polymers based on trigonal ligand: 4′-(4-pyridyl)-3,2′:6′,3″-terpyridine

Two novel Zn(II) coordination polymers, [Zn₅(pytpy)₈(fum)₄(H₂O)₄(OH)₂]_n · n(CH₃OH) · 2n(H₂O) (1) and [Zn₃(pytpy)₄ (btc)₂]_n · 2n(H₂O) (2) (pytpy = 4′-(4-pyridyl)-3,2′:6′,3″-terpyridine, H₂fum = fumaric acid, H₃btc = 1,3,5-benzenetricarboxylic acid) have been hydrothermally synthesized and structurally characterized. Complex 1 is a 2D layer structure, which is constructed from linear pentanuclear Zn(II) subunits interconnected via bidentate-bridging pytpy ligands and tridentate-bridging fum²⁻ anions. Complex 2 is a 3D network structure, μ₂-pytpy ligands link the layers based on the heart-like hexanuclear subunits to form the 3D network. Both complexes show strong fluorescence emission upon excitation at 310 nm in solid state. Additionally, these two complexes possess great thermal stabilities, especially for 2, the framework is stable up to 350 °C.     

Synthesis and characterization of a novel liquid crystalline star‐shaped polymer based on α‐CD core via ATRP

Well‐defined side‐chain liquid crystalline star‐shaped polymers were synthesized with a combination of the “core‐first” method and atom transfer radical polymerization (ATRP). Firstly, the functionalized macroinitiator based on the α‐Cyclodextrins (α‐CD) bearing functional bromide groups was synthesized, confirmed by ¹H‐NMR, MALDI‐TOF, and FTIR analysis. Secondly, the side‐chain liquid crystalline arms poly[6‐(4‐methoxy‐4‐oxy‐azobenzene) hexyl methacrylate] (PMMAzo) were prepared by ATRP. The characterization of the star polymers were performed with ¹H‐NMR, gel permeation chromatography (GPC), differential scanning calorimetry (DSC) and thermal polarized optical microscopy (POM). It was found that the liquid crystalline behavior of the star polymer α‐CD‐PMMAzo_n was similar to that of the linear homopolymer. The phase‐transition temperatures from the smectic to nematic phase and from the nematic to isotropic phase increased as the molecular weight increased for most of these samples. All star‐shaped polymers show photoresponsive isomerization under the irradiation with Ultraviolet light. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Preparation and characterisation of a novel copper‐imprinted polymer based on β‐cyclodextrin copolymers for selective determination of Cu2+ ions

A novel ion‐imprinted polymer (IIP) using (6‐O‐butene diacid ester)‐β‐cyclodextrin (β‐CD‐MAH) as the functional monomer and copper ions as the template was developed for Cu²⁺ sensing. First, reactive β‐cyclodextrin (β‐CD) monomers with vinyl carboxylic acid functional groups were synthesised and were co‐polymerised with styrene via radical polymerisation. Then, the β‐CD copolymers were complexed with Cu²⁺ in order to obtain the IIP. The imprinting effect was realised by removing the template ions from the imprinted polymer. The structure, composition and morphology of the IIP were characterised by Fourier transform IR spectroscopy, energy‐dispersive spectroscopy and field‐emission SEM. The adsorption capacity was investigated by UV–visible spectroscopy in batch operation mode. The maximum adsorption capacity for the Cu²⁺ template ions was 28.91 mg g^?1, and the adsorption selectivity was clearly illustrated from the increased sorption affinity towards Cu²⁺ ions over other competing ions. The adsorption was affected by the pH of the aqueous medium, and enhanced adsorption capacity was observed at pH 5. The prepared IIP could be used 10 times after its regeneration without significant loss of the adsorption capacity. © 2018 Society of Chemical Industry     

Atom transfer radical polymerization of (R)‐2‐methacryloyloxy‐2′‐methoxy‐1,1′‐binaphthalene

Atom transfer radical polymerization (ATRP) of (R)‐2‐methacryloyloxy‐2′‐methoxy‐1,1′‐binaphthalene ((R)‐MAMBN) mediated by different amine ligands, copper(I) chloride and ethyl 2‐bromopropionate in different solvents, and reverse ATRP of (R)‐MAMBN were studied. It was shown that optically active polymers were obtained, with poor control of the molecular weights, and low polydispersities. Specific rotation of the polymers increased with increasing molecular weights. By comparison with (R)‐MAMBN, poly((R)‐MAMBN)s exhibits higher specific rotation and a positive Cotton effect. Copyright © 2003 Society of Chemical Industry     

Functionalization of carbon nanomaterials for advanced polymer nanocomposites: A comparison study between CNT and graphene

The allotropes of carbon nanomaterials (carbon nanotubes, graphene) are the most unique and promising substances of the last decade. Due to their nanoscale diameter and high aspect ratio, a small amount of these nanomaterials can produce a dramatic improvement in the properties of their composite materials. Although carbon nanotubes (CNTs) and graphene exhibit numerous extraordinary properties, their reported commercialization is still limited due to their bundle and layer forming behavior. Functionalization of CNTs and graphene is essential for achieving their outstanding mechanical, electrical and biological functions and enhancing their dispersion in polymer matrices. A considerable portion of the recent publications on CNTs and graphene have focused on enhancing their dispersion and solubilization using covalent and non-covalent functionalization methods. This review article collectively introduces a variety of reactions (e.g. click chemistry, radical polymerization, electrochemical polymerization, dendritic polymers, block copolymers, etc.) for functionalization of CNTs and graphene and fabrication of their polymer nanocomposites. A critical comparison between CNTs and graphene has focused on the significance of different functionalization approaches on their composite properties. In particular, the mechanical, electrical, and thermal behaviors of functionalized nanomaterials as well as their importance in the preparation of advanced hybrid materials for structures, solar cells, fuel cells, supercapacitors, drug delivery, etc. have been discussed thoroughly.     

Polymeric pH-sensitive membranes—A review

Significant progress has been achieved in recent years in the field of pH-sensitive membranes. In many cases, pH-sensitive membranes are systems for which the flux, membrane pore size, and solute rejection ratio may be manipulated by changing the pH. This review summarizes recent developments covering the preparation, pH-responsive properties, and applications in various disciplines. The pH-sensitive groups and the evaluation parameters for pH-sensitive membranes are reviewed and discussed. A variety of preparation methodologies, including blending, pore-filling, surface-grafting, and surface-coating techniques are described, and some of their salient features are highlighted. The flat-sheet form and hollow-fiber form pH-sensitive membranes are reviewed. Membrane pore size change and electroviscous effect are discussed. Furthermore, future perspectives of pH-sensitive membranes are discussed.