Assessment of potential impacts of municipal solid waste treatment alternatives by using life cycle approach: a case study in Vietnam

In Vietnam, most of municipal solid waste (MSW) is disposed of at open dumping and landfill sites, and the methane gas from waste is the un-ignorable source of greenhouse gas (GHG) emission. It is indispensable to explore the possibility for GHG mitigation in MSW management. The objective of this study was to estimate alternative waste treatment practices towards the GHG emission mitigation, energy consumption and generation, reduction of landfill volume, and various benefits for proposing the appropriate selection by scenario analyses for representative Vietnam’s cities. Impacts were calculated by utilizing life cycle assessment (LCA) method. A literature review survey on the current applicability of LCA database for assessing impacts from waste sector in developing countries, especially for Vietnam, was carried out. This study assessed the contribution of alternative solid waste treatment practices. The result showed that, except investment and operation costs, incineration with energy recovery seems the suitable alternative for treating waste from representative cities of Vietnam according to reduction of GHG emission and waste burden to landfill sites and energy recovery and generation. Besides, MSW composition was identified as an important factor directly influencing to impacts as well as other products and benefits of waste treatment alternatives. Reliable data on waste composition are indispensable for assessing to choose, improve, or plan the waste treatment practices towards sustainable development.     

Assessment of plastic waste generation and its potential recycling of household solid waste in Can Tho City, Vietnam

Plastic solid waste has become a serious problem when considering the disposal alternatives following the sequential hierarchy of sound solid waste management. This study was undertaken to assess the quantity and composition of household solid waste, especially plastic waste to identify opportunities for waste recycling. A 1-month survey of 130 households was carried out in Can Tho City, the capital city of the Mekong Delta region in southern Vietnam. Household solid waste was collected from each household and classified into ten physical categories; especially plastic waste was sorted into 22 subcategories. The average household solid waste generation rate was 281.27 g/cap/day. The compostable and recyclable shares respectively accounted for high percentage as 80.74% and 11%. Regarding plastic waste, the average plastic waste generation rate was 17.24 g/cap/day; plastic packaging and plastic containers dominated with the high percentage, 95.64% of plastic waste. Plastic shopping bags were especially identified as the major component, accounting for 45.72% of total plastic waste. Relevant factors such as household income and household size were found to have an existing correlation to plastic waste generation in detailed composition. The household habits and behaviors of plastic waste discharge and the aspects of environmental impacts and resource consumption for plastic waste disposal alternatives were also evaluated.     

A new method for environmental site assessment of urban solid waste landfills

Regarding various types of pollutant, waste management requires high attention. Environmental site selection study, prior to landfill operation, and subsequently, monitoring and maintaining of the location, are of foremost points in landfill site selection process. By means of these studies, it is possible to control the undesirable impacts caused by landfills. Study ahead aims at examination of effectiveness of a new method called Monavari 95–2 in landfill site assessment. For this purpose, two landfills Rasht and Andisheh, which are, respectively, located on humid and arid areas, were selected as case studies. Then, the results obtained from both sites were compared with each other to find out the weaknesses and strengths of each site. Compared with others similar methods, much more criteria (53 parameters) can be considered within this method, so the results will be more calculable. According to this method, Rasht landfill (site H) is classified as unacceptable landfill site i.e. there is an urgent need for a new suitable site for landfill, while Andishe Landfill (site D) is ranked as acceptable landfill site but needs environmental management program to handle the existing weaknesses.     

Preliminary evaluation of evaluation of the efficiency of aircraft liquid waste treatment using resolvable sanitizing liquid: a case study in Changchun

The physical, chemical, and biological indices of aircraft liquid wastes collected from multiple airplanes at Longjia Airport, Changchun, China were measured according to "Integrated Wastewater Discharge Standard," evaluating treatment efficiency of resolvable sanitizing liquid. The results indicate that, after being treated by the resolvable sanitizing liquid, the indices of all first-class pollutants met the requirements of the standard, while among the second-class pollutants, the suspension content, biochemical oxygen demand after 5 days, and chemical oxygen demand as well as the contents of amino nitrogen, total phosphorus, anionic surfactants, total copper, absorbable organic halogen, and phenolic compounds did not reach the discharge standard. Particularly, the level of fecal coliform bacteria in the aircraft liquid wastes can meet the standard specification by adding more than 1 mL/L resolvable sanitizing liquid. The aircraft wastewater treated by resolvable sanitizing liquid cannot be directly discharged back into the environment as well as urban drainage systems.     

Characterization and pollution potential assessment of Tunceli, Turkey municipal solid waste open dumping site leachates

Environmental monitoring of leachate quality from an open municipal solid waste dumping site in Tunceli, Turkey was studied in this research. The most commonly examined pollution parameters were determined on a seasonal basis. The annual average 5-day biological oxygen demand (BOD₅) and chemical oxygen demand (COD) values of station points were measured as 70 and 425 mg/L, respectively, and also the average BOD₅/COD ratio (a measure of biodegradability) was calculated as 0.20. The low ratio of biodegradability and slightly alkaline pH values in the leachate samples indicated that the site was characterized by methanogenic conditions. The mean ammonium-nitrogen (NH₄ ⁺-N) and corresponding phosphate (orthophosphate) values were assayed as 70 and 11 mg/L, respectively. The average solids content in the leachates was measured as 4,681 mg/L (total solids) and 144 mg/L (suspended solids). Very low concentrations of iron, manganese, copper, and zinc in the leachate samples were found and the concentration of cadmium was measured below detection limits. Excessive amount of nutrients and high organic and inorganic pollutant content in the leachates pose serious pollution potential to the environment. Since no drainage system or bio treatment exists in this open dumping site, high permeability of natural soil at the site and in the surrounding area and very fractured and crackled rocks under natural soil are indicators of high groundwater pollution potential in this site.     

A thematic review of life cycle assessment (LCA) applied to pig production

Commercial livestock production is known to have significant impacts on the environment. Pig production is a complex system which involves the production of animal feed, transportation, animal rearing and waste management. One tool for assessing the environmental performance of such complex systems is life cycle assessment (LCA). LCA has been applied to pig production considerably to date. This paper provides a chronological review of state-of-the-art pig production LCAs under three themes: feed production; entire-system livestock rearing; and waste management. The study considers how LCA applications have addressed technological improvements in animal husbandry, and highlights methodological limitations, particularly related to cross-study comparisons. Recent research demonstrates crude protein reduction in feed and anaerobic treatment of pig excreta resulting in bioenergy production are the key targets for environmental performance improvements related to pig production.     

Application of analytic hierarchy process in a waste treatment technology assessment in Mexico

The high per capita generation of solid waste and the environmental problems in major rural communities of Ensenada, Baja California, have prompted authorities to seek alternatives for waste treatment. In the absence of a selection methodology, three technologies of waste treatment with energy recovery (an anaerobic digester, a downdraft gasifier, and a plasma gasifier) were evaluated, taking the broader social, political, economic, and environmental issues into considerations. Using the scientific literature as a baseline, interviews with experts, decision makers and the community, and waste stream studies were used to construct a hierarchy that was evaluated by the analytic hierarchy process. In terms of the criteria, judgments, and assumptions made in the model, the anaerobic digester was found to have the highest rating and should consequently be selected as the waste treatment technology for this area. The study results showed low sensitivity, so alternative scenarios were not considered. The methodology developed in this study may be useful for other governments who wish to assess technologies to select waste treatment.     

Application of FT-IR for assessment of the biological stability of landfilled municipal solid waste (MSW) during in situ aeration

Disposal of untreated municipal solid waste leads to gaseous emissions as well as liquid degradation products. In situ aeration is an emerging means for remediation of abandoned landfills. It aims at an accelerated mineralization and stabilization of waste organic matter and thus reduces significantly the emission potential of the site. In order to prove the success of the technique, evaluation of the biological stability of the aerated material has been suggested. Fourier Transform Infrared Spectroscopy (FT-IR) provides comprehensive information on the chemical composition of solid waste samples. Different stages of organic matter degradation are reflected by changes in the infrared spectral pattern. In the present study the feasibility of applying FT-IR for assessment of the stability of waste material derived from abandoned landfills and for in situ aeration process control was investigated. Waste samples derived in the course of pilot-scale and lab-scale aeration experiments were characterized by FT-IR (4000-400 cm(-1), KBr-technique, transmission mode) and a set of conventional parameters describing biological stability. The occurrence of distinct indicator bands was correlated with chemical and biological waste properties using 206 solid waste samples. Visual spectra interpretation was found to be appropriate in proving a reduced emission potential of initially rather reactive waste (respiration activity over 4 days (RA(4)) > 7 mg O(2) g(-1) DM) during aeration. Furthermore, cluster analysis was applied successfully to differentiate between original and aerated waste samples, even for rather stable material (RA(4) < 7 mg O(2) g(-1) DM), when visual spectra interpretation was limited.     

Methodology of CO2 emission evaluation in the life cycle of office building façades

The construction industry is one of the greatest sources of pollution because of the high level of energy consumption during its life cycle. In addition to using energy while constructing a building, several systems also use power while the building is operating, especially the air-conditioning system. Energy consumption for this system is related, among other issues, to external air temperature and the required internal temperature of the building. The façades are elements which present the highest level of ambient heat transfer from the outside to the inside of tall buildings. Thus, the type of façade has an influence on energy consumption during the building life cycle and, consequently, contributes to buildings' CO₂ emissions, because these emissions are directly connected to energy consumption. Therefore, the aim is to help develop a methodology for evaluating CO₂ emissions generated during the life cycle of office building façades. The results, based on the parameters used in this study, show that façades using structural glazing and uncolored glass emit the most CO₂ throughout their life cycle, followed by brick façades covered with compound aluminum panels or ACM (Aluminum Composite Material), façades using structural glazing and reflective glass and brick façades with plaster coating. On the other hand, the typology of façade that emits less CO₂ is brickwork and mortar because its thermal barrier is better than structural glazing façade and materials used to produce this façade are better than brickwork and ACM. Finally, an uncertainty analysis was conducted to verify the accuracy of the results attained.     

An assessment of heavy metal contamination in surface sediment using statistical analysis

The distribution and accumulation of heavy metals in the sediments, especially those nearest of wastewater discharges of south of Spain, were investigated. Sediment samples from 14 locations were collected and characterised for metal content (e.g. Ni, Cu, Zn, Cr, Pb, Mn, Cd and Hg), organic carbon, total nitrogen, total phosphorous, n-hexane-extractable material, carbonates and grain size. Concentration data were processed using correlation analysis and factor analysis. The correlation analysis of concentrations data showed important positive correlations among organic carbon, total phosphorus, Cu, Zn, Cd and Hg, otherwise weak correlations among Mn, Cr, Ni and CO₃ ^2???, indicating that these metals have complicated geochemical behaviours. The use of statistical factor analysis also confirmed these results. Sediments pollution assessment was carried out using geoaccumulation and metal pollution indexes (MPI₈). The results revealed that sediments of Cádiz bay and Sancti Petri channel were uncontaminated with the studied metals.     

An alternative method for the determination of estrogens in surface water and wastewater treatment plant effluent using pre-column trimethylsilyl derivatization and gas chromatography/mass spectrometry

A procedure using pre-column trimethylsilyl derivatization and gas chromatography/ mass spectrometry (GC/MS) was developed and applied in determining trace estrogens in complex matrix. Main conditions were optimized, including pH value, salinity of water sample, elution reagents, clean procedure, derivative solvent and temperature. The optimized method was used to determine steroid estrogens in surface water and effluents of wastewater treatment plant (WWTP). Low detection limits of 0.01, 0.03, 0.03, 0.07, 0.09 and 0.13 ng/l for DES, E1, E2, EE2, E3 and E(V), respectively were obtained under optimism condition. No apparent interferences appeared in chromatography in comparison with ultrapure water blank. Mean recovery ranged from 72.6% to 111.0% with relative standard deviation of 1.1-4.6% for spiked surface water, and from 66.6% to 121.1% with relative standard deviation of 1.5-4.7% for spiked effluent of WWTP. The results suggested that the optimized method provides a robust solution for the determination of trace steroid estrogens in complex matrix.     

An evaluation of the social dimensions in public participation in rural domestic waste source-separated collection in Guilin,China

A comprehensive evaluation of public participation in rural domestic waste (RDW) source-separated collection in China was carried out within a social-dimension framework, specifically in terms of public perception, awareness, attitude, and willingness to pay for RDW management. The evaluation was based on a case study conducted in Guilin, Guangxi Zhuang Autonomous Region, China, which is a representative of most inland areas of the country with a GDP around the national average. It was found that unlike urban residents, rural residents maintained a high rate of recycling, but in a spontaneous manner; they paid more attention to issues closely related to their daily lives, but less attention to those at the general level; their awareness of RDW source-separated collection was low and different age groups showed significantly different preferences regarding the sources of knowledge acquirement. Among potential information sources, village committees played a very important role in knowledge dissemination; for the respondents’ pro-environmental attitudes, the influencing factor of “lack of legislation/policy” was considered to be significant; mandatory charges for waste collection and disposal had a high rate of acceptance among rural residents; and high monthly incomes had a positive correlation with both public pro-environmental attitudes and public willingness to pay for extra charges levied by RDW management. These observations imply that, for decision-makers in the short term, implementing mandatory RDW source-separated collection programs with enforced guidelines and economic compensation is more effective, while in the long run, promoting pro-environmental education to rural residents is more important.     

An implementation plan for using biological indicators to improve assessment of water quality in Thailand

The present study showed a possibility to use phenotypic and proteomic responses in rice plants as an in vivo biomarker to detect higher concentrations of ambient ozone (O₃). The investigation was done on two cultivars of Indian rice using open top chambers ventilated with charcoal filtered air, ambient air, ambient air with 10 ppb O₃ exposure and ambient air with 20 ppb O₃ exposure at a rural site of Varanasi, India. Results showed that the magnitude of O₃ induced specific type of foliar injury directly depends on the duration and concentration of O₃ exposure. Even the internal protein profile of injured and normal leaf demonstrated a differential expression, which directly indicates towards the molecular basis of plant’s response against O₃.     

An assessment of heavy metal contamination in soils of fresh water aquifer system and evaluation of eco-toxicity by lithogenic implications

The chemistry of heavy metals in sediments with respect to bio-availability and chemical reactivity is regulated by pH, texture, and organic matter contents of the sediments and specific binding form and coupled reactivity of the metals within. To focus on the metal distribution (Fe, Mn, Pb, Cd, Zn, Co, Cu, and Cr) and behavior in a fresh water aquifer system along with the ecological toxicity parameters, a four-step sequential extraction method was applied on 18 Eastern Ghats’ type sediments from fluorosis-hit Nayagarh district, India. Geo-accumulation index of metals in the sediments indicates that they are practically uncontaminated and/or less contaminated with and Fe, Mn, and Cu; contaminated to moderately contaminated with Pb, Zn, and Cr; and strongly contaminated with Cd. Rather, more than 80 % recovered Cd metal concentration in sediments constitute the labile fractions. Temporal clustering of metal fractions indicates transition metal fraction distribution claiming the sediment pH regulation. Similarly, base metal distribution accounts for organic carbon and soil conductivity due to their greater availability in exchangeable and sulfide fractions. Correlation analysis and factor analysis scores demonstrate lack of inter-relationship between transition group and base metal fractions. High fluoride concentration in ground water is associated with high sodium-bicarbonate-iron affinity with elevated pH values (i.e., >7.0) and high positive factor score with the total iron concentration in ground water.     

An assessment of metal pollution in surface sediments of Seyhan dam by using enrichment factor, geoaccumulation index and statistical analyses

The aim of this study was to determine if high concentrations of any heavy metals exist in the sediment of Seyhan Dam reservoir to be considered toxic to the aquatic environment. Surface sediment samples from five stations in the Seyhan dam were collected quarterly from 2004 to 2005 and examined for metal content (Cr, Zn Cu, Mn, Cd, Fe, Ca, K, and Na), organic matter, and grain size. Correlation analyses showed that metal content of Seyhan dam sediment was affected by organic matter and grain size. The results have been compared with values given in the literature. The evaluation of the metal pollution status of the dam was carried out by using the enrichment factor and the geoaccumulation index. A comparison with sediment quality guideline values has also been made. Based on the enrichment factor, dam sediments were treated as a moderately severe enrichment with Cd and minor enrichment with Cr and Mn. The results of geoaccumulation index reveal that sediments of Seyhan Dam were strongly polluted in stations 1, 2, 4, and 5, and were moderately polluted in station 3 with Cd. Moreover, Cd and Cr concentrations in the sediments were above TECs except ERL for Cd.     

Factors influencing the sinuosity of Pannagon River, Kottayam, Kerala, India: An assessment using remote sensing and GIS

The present study was carried out to identify the factors influencing the sinuosity of the Pannagon river, using the IRS P6 LISS III data and Geographical Information System (GIS) on 1:50,000 scale. The river follows meandering course and exhibits a narrow, highly sinuous and incised channel. Several lines of evidence including satellite and topographic data, geological maps and field investigations and the generated themes on lithology, structure, geomorphology, slope, riparian vegetation and hydrology have analyzed to understand the controls on the channel morphology of the Pannagon river. The average of sinuosity index of the selected reaches in the river on 1967 was 1.6 and of 2004 was 1.8. The sinuous patches are more in the lower reaches of the river and most of the area comes under floodplain with thick column of alluvial deposits. The analysis shown that the style and degree of sinuosity of the Pannagon river depends on a number of geological factors, including tectonics and the riparian vegetation also plays a major role.