Montmorillonite intercalated with vitamin B1 as drug carrier

Vitamin B₁ (thiamine hydrochloride, VB₁) intercalated into montmorillonite (MMT), which was characterized by X-ray diffraction (XRD), Fourier transformed infrared spectroscopy (FT-IR), and thermo gravimetric analysis (TGA). The adsorption of VB₁ on MMT increased with increase in reaction temperature. The adsorption isotherms were fitted by the Langmuir model. About 34 and 64% of the intercalated VB₁ was released within 10 h, in simulated gastric fluid (pH 1.2) and simulated intestinal fluid (pH 7.4) respectively at 37 ± 0.5 °C. The release profile of VB₁ followed the Higuchi kinetic model and the diffusion-controlled mechanism. During in vitro release experiments VB₁ was released from MMT–VB₁ steadily as a function of pH.     

Alginate/BSA/montmorillonite composites with enhanced protein entrapment and controlled release efficiency

Novel pH sensitive alginate–protein–clay composite beads were investigated for the in vitro oral delivery of the model protein, bovine serum albumin (BSA). X-ray diffraction (XRD) results revealed that BSA enter between layers of montmorillonite (MMT) by expanding interlayer distance and finally an exfoliated structure forms in the alginate hydrogel. MMT incorporation increases protein entrapment efficiency to 78%, compared to 40% of conventional alginate beads. The release ratio of BSA from composite beads is 9–13% depending on MMT contents after around a 2 h stay in gastric fluid. More importantly, no BSA release is detected until 60–90 min after the first contact time of beads with gastric solution. The presence of clay in alginate beads prevents burst release in higher pH of intestine by slowing release rate of BSA to 45–55% within around 9 h, resulting in a potential matrix for intestinal release of protein drugs.     

In vitro and in vivo release of cefuroxime axetil from bioactive glass as an implantable delivery system in experimental osteomyelitis

The aim of this study was to evaluate the characterisation, in vitro and in vivo biocompatibility and antimicrobial activity of bioactive glass (BG) impregnated with an antibiotic. The BG was prepared by normal glass melting procedures as a controlled release device to treat experimental osteomyelitis. The study design was for prospective in vivo experimental study. Two sets of porous bioactive glass ceramic blocks (9 mm × 4 mm × 4 mm and 20 mm × 9 mm × 9 mm) were fabricated using bioactive glass powder and subsequently antibiotic cefuroxime axetil (CFA) (55 and 125 mg on an average) was impregnated in these two sets of blocks, respectively. Osteomyelitis was produced in the right tibia of the rabbits according to the model of Norden. After thorough in vitro characterization of the porous blocks [including X-ray diffraction (XRD), Fourier-transformed infra-red spectroscopy (FTIR), thorough chemical analysis by inductively coupled plasma-atomic emission spectra (ICP-AES) and field-emission scanning electron microscopy (FESEM)] and in vitro elution of the said drug, in vivo test was carried out with rabbit species split into two groups: (a) animals treated with CFA impregnated bioactive glass and (b) parenteral [intra muscular (IM)] administration of CFA. Histological, radiological and drug concentration in bone and serum (measured by HPLC) in both groups were carried out. HPLC technique was used for determination of concentration both in vitro and in vivo. Fabricated porous struts showed amorphous microstructure without formation of any crystallite. The elution of said drug was stopped after 6 days in vitro. Histological studies at 3 and 6 weeks revealed formation of well-developed lamellar bone and havarsian canal. Radiological evaluation pointed out disappearance of sequestrum and existence of newly formed bony specules. Concentration of cefuroxime axetil in bone and serum showed highest value on day 21 which reduced marginally by day 42 and these values were higher than minimum inhibitory concentration (MIC) against Staphylococcus aureus (known pathogen for chronic osteomyelitis). It could be concluded that the biodegradable antibiotic carrier system developed in this study proved to be an effective therapeutic approach toward an experimental model of osteomyelitis. Based particularly on the in vivo results of the study, this cefuroxime axetil incorporated bioactive glass blocks can be successfully used in clinical cases of osteomyelitis in veterinary as well as human orthopaedic surgery.     

Influence of montmorillonite on cadmium accumulation in carp, Carassius auratus

The present study was designed to test the influence of montmorillonite (MMT) on cadmium accumulation in different tissues of Carassius auratus. 180 normal healthy C. auratus were randomly divided into four groups. They were fed with normal diet, normal diet supplemented with MMT (0.5%), high-cadmium (cadmium chloride, 120 mg/kg) diet and high-cadmium diet supplemented with MMT (0.5%). After 60 days, cadmium concentration in several tissues were measured by eletrothermic atomic absorption spectrophotometry, metallothionein contents were determined using the Cd-chelex assay and histopathological alterations of kidney were observed. MMT inhibited cadmium accumulation in kidney, intestine, liver, spleen, blood, gills, spermary, ovary, brain, bone and muscles of C. auratus. Metallothionein levels in liver, intestine and muscle decreased and pathological changes of kidney were reduced by MMT addition. Thus, MMT protected tissues of C. auratus from cadmium accumulation and damage.     

Intercalated structure of polypropylene/in situ polymerization-modified talc composites via melt compounding

Talc was modified with methyl methacrylate (MMA) or butyl acrylate (BA) via in situ polymerization. The talc/isotactic polypropylene (PP) composites with nano-sized intercalated structure were formed by melt compounding of PP with the modified talc. The results showed that the talc layers were partially delaminated, aligned along the flow direction, and uniformly dispersed in the PP matrix. The thickness of the PMMA-modified talc layers in the PP matrix was in the range 80-240 nm, while the PBA-modified talc was even thinner. PMMA or PBA macromolecules attached on the surface of talc layers hindered the crystallization of the PP component. Moreover, the aligned pristine talc layers promoted the orientation of the PP crystals. However, the extent of PP crystal orientation decreased in the presence of PMMA or PBA-modified talc.     

Adsorption and antibacterial effect of copper-exchanged montmorillonite on Escherichia coli K88

Calcium montmorillonite (Ca-MMT), sodium montmorillonite (Na-MMT) and acid-activated montmorillonite (AAM), and their Cu²⁺-exchanged montmorillonites (Cu-MMT), Cu*Ca-MMT, Cu*Na-MMT and Cu*AAM, were used to study the antibacterial activity on Escherichia coli K₈₈. AAM, Na-MMT and Ca-MMT showed some ability to reduce bacterial plate counts by 37.4%, 13.4% and 14.2%, respectively. Exchanging the montmorillonite with Cu²⁺ enhanced the antibacterial activity. The Cu*AAM, Cu*Na-MMT and Cu*Ca-MMT reduced the bacterial plate counts by 98.6%, 97.5% and 95.6%. Attempts were made to study the desorption of Cu²⁺ by washing with sterile physiological saline solution for 24 h. The washing solutions did not show a significant reduction of the bacterial counts, while the washed Cu-MMT retained their full antibacterial activity. Results from time-depending studies showed that the reduction of the bacterial counts by Cu-MMT increased during 24 h. The ranking of antibacterial activity of the three Cu-MMT was as Cu*AAM > Cu*Na-MMT > Cu*Ca-MMT. E. coli thrived optimally in a pH range from 5 to 7. Beyond this range, the bacterial counts decreased as the pH reduced the viability of the bacteria. The ranking of antibacterial activity of Cu-MMT was not affected by pH. The mechanism by which bacterial counts are reduced may involve the enhanced affinity of Cu-MMT for E. coli K₈₈ and the antibacterial activity of Cu²⁺.     

Effect of the intercalation agent content of montmorillonite on the swelling behavior and drug release behavior of nanocomposite hydrogels

A series of novel dual functional nanocomposite hydrogels were prepared from N‐isopropylacrylamide (NIPAAm), acrylic acid (AA) that is neutralized 50 mol % by sodium hydroxide (SA50), and montmorillonite (MMT). MMT was intercalated with three different contents of intercalation agent of (3‐acrylamidopropyl) trimethyl ammonium chloride (TMAACl). Investigation of the effect of intercalated MMT with three contents of intercalation agent (TMAACl) in the present nanocomposite hydrogels on the swelling and drug release behaviors is the main purpose in this study. The microstructure was identified by X‐ray diffraction (XRD). Results showed that the swelling ratio for the present nanocomposite hydrogels decreased with an increase in the content of the intercalation agent. The gel strength of the present gels did not change obviously with an increase in the content of intercalation agent. XRD results indicated that exfoliation of MMT was achieved in the dry and swollen gel state. Finally, the drug release behaviors for these gels were accessed also. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 74–82, 2004     

Melt intercalation of poly(l-lactide) chains into clay galleries

The melt intercalation of poly(l-lactide) (PLLA) chains into silicate galleries has been investigated via a melting process without any shearing force at elevated temperature. Under the melting process, the incorporation of various types of organo-modified montmorillonites into PLLA matrix lead to the increase in the basal spacing of clay particles in different manner without delamination into individual layers. The changes in layer-stacked structures of the clay particles in the PLLA matrix were examined by use of wide-angle X-ray diffraction and transmission electron microscopy. The effects of clay content in PLLA matrix and clay surfactants on the melt intercalation of PLLA were discussed in terms of chain mobility.     

Inorganic layered double hydroxides as a drug delivery system—intercalation and in vitro release of fenbufen

Layered double hydroxides (LDHs), or so-called anionic clays, consist of cationic brucite-like layers and exchangeable interlayer anions. Because of their biocompatibility, some LDHs, such as Mg/Al, Zn/Al, Fe/Al and Li/Al-LDH, can be used as host materials for drug-LDH host–guest supramolecular structures. The anti-inflammatory drug fenbufen has been intercalated into layered double hydroxides for the first time by co-precipitation under a nitrogen atmosphere. The product has been characterized by powder X-ray diffraction (XRD), FT-IR spectroscopy, elemental analysis and thermogravimetry (TG) and shows an expanded LDH structure, indicating that the drug has been successfully intercalated into LDH. In addition, the dependence of the nature of the fenbufen intercalation process on conditions such as pH value and chemical composition of the host has been systematically investigated. The interlayer distance in the intercalated materials increases with increasing pH value, resulting from a change in the arrangement of interlayer anions from monolayer to interdigitated bilayer. Drug release characteristics of the pillared LDH materials were investigated by a dissolution test in a simulated intestinal fluid (buffer at pH 7.8). The results show that the drug release of supramolecular LDH materials was a slow process, especially in the case of Mg/Al intercalated materials, suggesting that these drug-inorganic hybrid materials can be used as an effective drug delivery system.     

Novel graphite/TiO2 electrochemical cells as a safe electric energy storage system

A graphite/TiO₂ full cell has been developed as a new safety energy storage system using a highly safety process. The crystal structures of the anatase TiO₂ electrode have been investigated with respect to the performance of the electrodes. Due to the large anion intercalation into the graphite positive electrode, the possible charging potential can be raised to around 5.3 V against the Li/Li⁺ electrode, which is a higher charging voltage than lithium-ion batteries (maximum voltage is around 4.3 V vs. Li/Li⁺). In situ XRD measurements have been carried out on both the cathode and anode electrodes of the graphite/TiO₂ cell during the charge process to elucidate the intercalation mechanism.     

Fabrication, characterization and bioactivity evaluation of calcium pyrophosphate/polymeric biocomposites

The design of the biocomposites offers the opportunity to create grafting materials with excellent bioactivity, resorbability and improved mechanical properties. In this study, we are concerned with the preparation of calcium pyrophosphate (CPP) and its composites with polymeric matrix to enhance these properties. The fabricated biocomposites were characterized by X-ray diffraction (XRD), Fourier transformer infrared spectra (FT-IR), thermogravimetric (TGA) analyses and scanning electron microscope with X-ray elemental analysis (SEM-EDAX). The characterization results confirmed homogeneity, interaction and integration between the CPP filler and polymeric matrix. The mechanical properties of biocomposites had enhanced values compared to the original copolymer matrices and were comparable to those of cancellous bone. In vitro test results via calcium and phosphorous ions measurements, showed that the biocomposites had enhanced ability to accelerate the mineralization of calcium phosphate layer on their surfaces. FT-IR and SEM-EDAX post-immersion confirmed that the CPP/polymeric composites containing chitosan or chitosan–gelatin matrix had ability to induce a bone-like apatite layer onto their surfaces. Finally, a novel CPP/polymeric biocomposites have good bioactivity and suitable mechanical properties; therefore, they could be used in bone grafting and tissue engineering applications in future.     

Adsorption of gaseous SO2 and structural changes of montmorillonite

Several montmorillonite samples after adsorption of gaseous SO₂ were analyzed to evaluate structural and textural changes. The equilibrium adsorption of the SO₂ gas was measured at 25 °C and 0.1 MPa. The samples were characterized by X-ray diffraction (XRD), infrared spectroscopy (IR), swelling index (SI), pH measurements, and N₂ adsorption–desorption isotherms. SO₂ adsorption increased with the specific surface area of montmorillonite. SO₂ retention decreased pH of the dispersed samples from 6 to 1 and released interlayer and octahedral cations from the structure, which increased the specific BET surface area and specific micropore surface similar to that of acid-activated montmorillonite.     

Reversible collapse and Mg release of de- and rehydroxylated homoionic cis-vacant montmorillonites

Homoionic Na⁺, Ca²⁺, Sr²⁺, Li⁺, Cu²⁺ and Zn²⁺ samples of the <2 μm fraction of a cis-vacant montmorillonite from Linden (Bavaria) were steam treated at 200°C (≈1.5 MPa), 240°C (≈3.3 MPa) and 300°C (≈8.0 MPa) after dehydroxylation at temperatures up to 630°C. Cation exchange capacity (CEC) measurements, determination of exchangeable cations and X-ray diffraction (XRD), supplemented by thermoanalytical investigations of the evolved water in a thermobalance linked to a mass spectrometer, infrared (IR) and electron spin resonance (ESR) spectroscopy were employed to obtain information about the state of expandability and structural changes of swellable montmorillonite and the sites of interlayer and octahedral cations after heating and rehydroxylation.The XRD pattern of the initial samples showed a well-defined (001) reflection according to the interlayer cation and its hydration state under laboratory atmosphere. After dehydroxylation the pattern exhibited (001) reflections between 9.6 and 9.8 Å, corresponding to a collapsed structure for all samples. The Na⁺-, Ca²⁺- and Sr²⁺-rich montmorillonites regained partial expandability after rehydroxylation at 200°C and full expandability after rehydroxylation at 300°C if the dehydroxylation temperature was less than 630°C. Rehydroxylation at 300°C of the Cu²⁺- and Zn²⁺-rich montmorillonites did not cause reexpansion, whereas the Li⁺-rich samples recovered a partial swellability after rehydroxylation at 240°C and nearly the full swellability after rehydroxylation at 300°C.The Li⁺-, Cu²⁺- and Zn²⁺-rich samples underwent a strong CEC reduction due to migration of the interlayer cations into the 2:1 layer before dehydroxylation started. After rehydroxylation under water steam Cu²⁺- and Zn²⁺-rich samples released 16–30 meq/100 g of Mg²⁺ from the structure, increasing with the steam temperature. Mg²⁺ release was not observed for the Li⁺-rich montmorillonite.     

光聚合和热聚合蒙脱土插层纳米复合材料的研究

利用光引发聚合和热引发聚合研究了单体(MMA)和蒙脱土(Mot)插层复合材料(PMMA/Mot)的制备问题。用小角X光衍射技术对两种产物内蒙脱土的结构进行了表征。结果表明,蒙脱土经改性后能很好的使聚合单体插入蒙脱土层内并在光或热的作用下“就地”发生聚合反应生成复合材料,利用DSC、SEM研究了产物的结构和形态,并对两种聚合方法制备蒙脱土纳米复合材料的特点进行了初步讨论。     

Solid acidities of SiO2–TiO2/montmorillonite composites synthesized under different pH conditions

SiO₂–TiO₂/montmorillonite composites were prepared under acidic, neutral and basic conditions and the solid acidity of the resulting composites were determined. All the SiO₂/TiO₂ ratio of the colloidal particles was set at 10 but the resulting SiO₂/TiO₂ ratios were significantly richer in TiO₂. The XRD patterns of the acidic composite showed expanding and broadening of the (001) reflection by intercalation of colloidal SiO₂–TiO₂ particles, but the neutral and basic composites showed only broadening of the reflections and no intercalation. The specific surface areas of the acidic, neutral and basic composites (375, 237 and 247 m²/g, respectively) were much larger than of montmorillonite (6 m²/g). The average pore sizes were about 4, 15 and 50 nm, and the amounts of solid acidic sites measured by the NH₃-TPD were 178, 95 and 86 µmol/g for the acidic, neutral and basic composites, respectively. The solid acid amount of the acidic composite was twice that of a commercial catalyst, K-10, (85 µmol/g) and much higher than the guest phase SiO₂–TiO₂ gel (16 µmol/g) or the host phase montmorillonite (6 µmol/g). The TPD peak temperatures reflect the acid strength, and were similar in all the samples, ranging from 175° to 200 °C.     

The intercalation of C60-containing PEO into layered MnPS3

This paper reports the synthesis and magnetism of a new polymer-inorganic intercalation nanocomposite based on a C₆₀-containing poly(ethylene oxide) (C₆₀-PEO) into layered MnPS₃, which is characterized by XRD, IR and thermal analyses. The lattice expansion (Δd) of the intercalation nanocomposite is about 9.3 Å indicating the successful intercalation. And the charge balance is maintained by K⁺ ions coordinating with PEO chain of C₆₀-PEO polymer, which come from the pre-intercalation compound Mn_1−xPS₃[K_2x(H₂O)_y]. Magnetic measurements indicate that the intercalation nanocomposite (C₆₀-PEO/MnPS₃) exhibits a magnetic phase transition from paramagnetism to ferrimagnetism at about 40 K. And the distinctive hysteresis of M-H relationship further confirms that it is a low temperature ferrimagnetic nanocomposite.     

Solution-cast Nafion/montmorillonite composite membrane with low methanol permeability

Perfluorosulfonate ionomer dispersions in dimethylformamide solvent were used to form solution-cast membranes. Modified composite membranes were prepared with the addition of 1 and 5 wt.% montmorillonite salts. Measurements of water uptake, solubility and methanol permeation of the cast membranes were conducted. Tangential conductivities were measured directly on membranes fully immersed in deionized water by means of impedance spectroscopy. Results show that the addition of a low quantity of silicate did not alter the conductivity (94-96 mS cm⁻¹ at 25 °C), but produced a marked decrease of methanol permeability (−6%). Also a simple model was proposed to explain the increase of tangential conductivity with decreasing thickness of Nafion^® and recast membranes.     

Nanosized Si/cellulose fiber/carbon composites as high capacity anodes for lithium-ion batteries: A galvanostatic and dilatometric study

Recently, we reported a simple method for obtaining nanosized silicon with promising electrochemical properties as an anode material for lithium-ion batteries; the method involves the formation of a composite electrode with cellulose fibers. It is demonstrated that the performance of these electrodes can be enhanced by the addition of conductive carbon black (CCB). This beneficial effect is not only a result of the improvement of electrical conductivity and inter-particle contacts, but also due to a reduction of the expansion and shrinkage undergone by the electrode when Li is inserted into Si or extracted from Li_xSi, as revealed by in situ electrochemical dilatometry measurements. The best results were obtained with a CCB of high surface area and porosity. The Si/cellulose fiber/carbon electrodes obtained delivered charge capacities as high as 1800 mAh g⁻¹ and exhibited good capacity retention on cycling. These electrodes also exhibited lower expansion/shrinkage compared to carbon-free electrodes on discharging and charging the cell, respectively.     

pH-responsive micelles based on (PCL)2(PDEA-b-PPEGMA)2 miktoarm polymer: controlled synthesis,characterization, and application as anticancer drug carrier

Amphiphilic A₂(BC)₂ miktoarm star polymers [poly(ϵ-caprolactone)]₂-[poly(2-(diethylamino)ethyl methacrylate)-b- poly(poly(ethylene glycol) methyl ether methacrylate)]₂ [(PCL)₂(PDEA-b-PPEGMA)₂] were developed by a combination of ring opening polymerization (ROP) and continuous activators regenerated by electron transfer atom transfer radical polymerization (ARGET ATRP). The critical micelle concentration (CMC) values were extremely low (0.0024 to 0.0043 mg/mL), depending on the architecture of the polymers. The self-assembled empty and doxorubicin (DOX)-loaded micelles were spherical in morphologies, and the average sizes were about 63 and 110 nm. The release of DOX at pH 5.0 was much faster than that at pH 6.5 and pH 7.4. Moreover, DOX-loaded micelles could effectively inhibit the growth of cancer cells HepG2 with IC₅₀ of 2.0 μg/mL. Intracellular uptake demonstrated that DOX was delivered into the cells effectively after the cells were incubated with DOX-loaded micelles. Therefore, the pH-sensitive (PCL)₂(PDEA-b-PPEGMA)₂ micelles could be a prospective candidate as anticancer drug carrier for hydrophobic drugs with sustained release behavior.     

Feasibility study of using montmorillonite for stability enhancement of l-ascorbic acid

This study tended to construct new l-ascorbic acid (LAA) composites in low toxicity and high stability for feasible application. LAA is chemically very unstable, since it is easily oxidized into biologically inactive compounds naturally. Our finding showed that introduction of montmorillonite (MMT) could significantly attenuate its toxicity and to sustain the stability of LAA with economic feasibility for practical uses. In addition, as phosphoric acid was biologically compatible, it was used for the pretreatment of MMT to obtain a promising stabilization of LAA. Toxicity assessment also showed that MMT treated with low-concentration acids should be considered as biologically safe according to our assessment. Thus, using acid treated MMT to stabilize LAA in a long-term might be technically feasible for further uses.