机载光通信复合轴光路优化设计和跟瞄技术研究

根据机载激光通信的环境和链路距离,采用光电粗精复合轴结构,提出一种双探测器、双光轴机载激光通信复合轴捕获跟踪瞄准系统方案.对整个系统的光路结构进行了分析和优化设计,使粗跟踪精度达120μrad,精跟踪系统带宽大于300Hz,执行动态范围达5mrad,跟踪精度达3μrad,并成功实现通信距离17.5km、通信速率1.5Gbps,误码率达1E-7的飞机对地面激光通信实验.     

多晶硅片反应离子刻蚀制绒后扩散工艺的匹配性

根据机载激光通信的环境和链路距离,采用光电粗精复合轴结构,提出一种双探测器、双光轴机载激光通信复合轴捕获跟踪瞄准系统方案.对整个系统的光路结构进行了分析和优化设计,使粗跟踪精度达120 μrad,精跟踪系统带宽大于300 Hz,执行动态范围达5 mrad,跟踪精度达3 μrad,并成功实现通信距离17.5 km、通信速率1.5 Gbps,误码率达1E-7的飞机对地面激光通信实验.     

星间激光通信中复合轴系统的带宽设计研究

星间激光通信中,由粗跟踪系统和精跟踪系统组成的复合轴系统完成了系统的大范围、高精度跟踪任务。对复合轴系统进行了基于Z变换的数字模拟以研究其带宽设计。根据计算的卫星轨迹和粗跟踪系统机械误差,得到了粗跟踪系统的带宽设计结果;给出了粗跟踪系统和精跟踪系统的配合工作关系;得到了精跟踪系统的带宽设计结果;最后研究了在中高频扰动下,复合轴系统的带宽设计。以上结果为星间激光通信中的复合轴系统控制系统设计提供了重要依据。     

基于FSM的高精度光电复合轴跟踪系统研究

为解决大惯量光电跟踪器对高速机动目标的角秒级跟踪问题,设计了以快速控制反射镜作为精级,大惯量跟踪架作为粗级的双探测器型光电复合轴跟踪系统,并对快速控制反射镜和复合轴系统所涉及关键技术进行了分析。通过某模拟航路半实物跟踪试验不超过70μrad的跟踪误差,验证了系统设计的有效性。     

基于SOPC的光信号数据采集解调系统设计

设计并实现了一种基于可编程单片式系统(SOPC)开发平台的光信号数据采集解调系统。通过现场可编程门阵列(FPGA)设计完成了光信号数据的采集、解调以及FLASH数据的实时存储和TCP/IP数据的实时传输。通过系统测试,验证了该系统具有工作性能稳定、功能完备、实时性高、适用范围广、可裁剪、可扩展等优点,在激光测试、光电信号处理等领域具有广泛的应用价值。     

基于卡尔曼与模糊PID的高帧频图像识别跟踪系统

针对空间光通信系统对信标光斑实时准确跟踪需求,设计了基于高帧频相机的精跟踪处理控制平台,并将图像处理和控制算法全部集成在大规模现场可编程门阵列芯片内部.将模糊推理规则与常规比例、积分和微分算法结合,提高了非线性系统的控制准确度|将卡尔曼滤波器的预测功能与模糊比例、积分和微分结合起来,达到对快速倾斜镜的实时超前控制.现场实验表明,该系统能有效抑制外界干扰,实现对光斑弱小目标的准确跟踪,具有动态响应快、稳定准确度高和抗干扰能力强的特点.     

基于卡尔曼与模糊PID的高帧频图像识别跟踪系统

针对空间光通信系统对信标光斑实时准确跟踪需求,设计了基于高帧频相机的精跟踪处理控制平台,并将图像处理和控制算法全部集成在大规模现场可编程门阵列芯片内部.将模糊推理规则与常规比例、积分和微分算法结合,提高了非线性系统的控制准确度;将卡尔曼滤波器的预测功能与模糊比例、积分和微分结合起来,达到对快速倾斜镜的实时超前控制.现场实验表明,该系统能有效抑制外界干扰,实现对光斑弱小目标的准确跟踪,具有动态响应快、稳定准确度高和抗干扰能力强的特点.     

无人机异步图像数据采集系统设计

针对无人机遥感要求高空间分辨率、高光谱分辨率和高时间分辨率且体积小、重量轻,采用离轴三反消像散光学系统满足其大视场轻量化设计要求.提出各相机异步工作,采用单片现场可编程门阵列(FPGA)实现各异步相机数据整合并以同一参考时钟同步实时输出.介绍了整个异步图像数据采集系统的结构,采用FPGA内部的异步先进先出(first in first out, FIFO)实现两路不同时钟域数据按接收端时钟同步输出,在Xilinx ISE7.1环境下用Modelsim6.1进行了时序仿真,并进行了实际测试.实验结果表明:系统稳定可靠,整个成像系统焦距f=70 mm,相对孔径D/f=1/6,视场角2w=65°.采用两组线阵CCD相机工作,总重量仅6 kg.     

基于现场可编程门阵列的加速器同步控制器设计

针对加速器驱动次临界系统(ADS)注入器Ⅱ的控制中对于同步触发信号的要求,设计了基于现场可编程门阵列(FPGA)的高精度同步控制器,它能为加速器设备提供同步工作所需的脉冲信号。控制器采用粗延时结合精延时的方式,FPGA实现粗延时,专用延时芯片实现精延时,提高了延时精度,同时增大了延时、脉宽及周期的调节范围。测试结果表明,该控制器输出脉冲的最小延时步距为0.25ns,延时、脉宽及周期调节范围为1μs~2s,周期抖动的标准偏差为70ps。该控制器输出信号满足要求,程序界面操作简便,通过串口RS-422远程控制稳定可靠。     

大气湍流对空间激光通信跟踪系统的影响

基于大气信道内的空间激光通信演示验证实验,对系统光斑跟踪精度的影响因素进行了分析,研究了大气湍流对光斑跟踪精度的影响,建立了光斑质心检测模型,设计了一套信标光光斑粗精复合跟踪系统.搭建了室内测试实验系统,完成了大气湍流对光斑跟踪精度影响的测量,结果表明在中弱湍流时,跟踪精度随湍流增大有近似线性关系,系统整体跟踪精度在5~15μrad之间,可较好地完成光斑跟踪功能.在野外环境开展的飞机-飞机激光通信演示实验中,对伺服系统的跟踪性能及跟踪精度进行实际测量,整体跟踪精度不大于15μrad,与室内实验测试系统基本一致.     

Hybrid Wavelength and Code Division Multiple Access in Optical Networks

A review of schemes for multiple access in fiber optic networks shows that a hybrid of wavelength and code division multiple access (WCDMA) combines the best features of both. In particular, the hybrid scheme retains the large information carrying capacity of wavelength division multiple access (WDMA) and flexibility of code division multiple access (CDMA). In this paper WDMA, optical CDMA (OCDMA), and WCDMA networks are discussed. In OCDMA networks, concept of incoherent and coherent coding including inverse decoding and matched filter is introduced. The delay performance of both WDMA and WCDMA networks, under the simple suboptimum access protocols based on cyclic search, is computed. It has been shown quantitatively that tuning delay significantly affects the delay performance of both WDMA and WCDMA networks. Futhermore, delay performance of WCDMA networks is always better than the WDMA networks for the same tuning delay, load, and number of users.     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Research on beamforming method for dual-line array with space mismatch between the two line arrays

The performance of port/starboard discrimination of dual-line array will be seriously degraded when the space between the two line arrays of the dual-line array is mismatched. The directivity function of the delay-sum and delay-subtract beamforming is deduced and the port/starboard discrimination of the delay-sum and delay-subtract beamforming is also studied both under the ideal status and the status under which the space between the two line arrays of the dual-line array is mismatched. Analysis results show the delay-subtract beamforming has better performance of port/starboard discrimination. At last, the sea trial results demonstrate the theoretical results.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Retrieval of ultraviolet skylight radiances and O3 slant column densities from balloon-borne limb spectrometer

With a novel light-weight and absolutely calibrated ultraviolet （UV） spectrometer, UV skylight radiances and O3 slant column densities are measured by balloon-borne limb measurements in Xinjiang area, China. UV skylight radiances measured at the height of 31 km are compared with the results from Modtran in the wavelength range from 290 to 420 nm. O3 slant column densities are derived from radiance spectra in the Huggins bands （320 - 335 nm） using differential optical absorption spectroscopy method. And the parameter exhibits a good correlation with the same value simulated by radiative transfer model （Tracy）. The O3 profile simultaneously measured by an O3 sonde is used as input in Tracy calculations. The O3 sonde is launched on the same balloon.     

Design optimization of highly sensitive LSPR enhanced surface plasmon resonance biosensors with nanoholes

For breaking through the sensitivity limitation of conventional surface plasmon resonance (SPR) biosensors, novel highly sensitive SPR biosensors with Au nanoparticles and nanogratings enhancement have been proposed recently.But in practice, these structures have obvious disadvantages.In this study, a nanohole based sensitivity enhancement SPR biosensor is proposed and the influence of different structural parameters on the performance is investigated by using rigorous coupled wave analysis (RCWA).Electromagnetic field distributions around the nanohole are also given out to directly explain the performance difference for various structural parameters.The results indicate that significant sensitivity increase is associated with localized surface plasmons (LSPs) excitation mediated by nanoholes.Except to outcome the weakness of other LSP based biosensors, larger resonance angle shift, reflectance amplitude, and sharper SPR curves' width are obtained simultaneously under optimized structural parameters.     

Polymer gratings based on photopolymerization for low-order distributed feedback polymer lasers

Novel polymer distributed feedback(DFB)gratings are fabricated based on photopolymerization to reduce lasing threshold of polymer lasers.A photopolymer formulation sensitive to 355-nm ultraviolet(UV)light is proposed for the fabrication of polymer gratings and it can be used to form polymer films by spin-coating process.A very low surface-relief depth ranging from 12.5 to about 1.0 nm has been demonstrated with a refractive-index modulation of about 0.012.The experimental results indicate that such polymer gratings have promising potentials for the fabrication of low-order DFB organic semiconductor lasers.     

A novel methodology for photometric compensation of projection display on patterned screen

We propose a novel methodology based on the projector-camera (ProCam) system to address the photometric compensation issue for the projection display on the patterned screen.The patterned screen is treated as the combination of a perfect white screen and a color modulator.The perfect white screen is used to automatically and accurately characterize the ProCam system offline using the polynomial model,and the parameters of the color modulator can be efficiently recovered by employing only two gray images based on the linear reflectance model.The experimental results show that the color artifacts of the display image can be greatly improved with this methodology,which demonstrates its feasibility and validity in the photometric compensation.