Highly Intensified Upconversion Luminescence of Ca2+‐doped Yb/Er:NaGdF4 Nanocrystals Prepared by a Solvothermal Route

Upon introducing Ca²⁺ dopants into the grain lattices by substituting Gd³⁺ ions, irregular Yb/Er:NaGdF₄ nanocrystals prepared through a simple solvothermal route convert into highly uniform nanorods. Meanwhile, their upconversion luminescence intensifies by about 200 times, probably due to a modification of the crystal structure of NaGdF₄ and an improvement in the crystallinity of the nanophase.     

Strong Single‐Band Blue Emission from Colloidal Ce3+/Tm3+‐Doped NaYF4 Nanocrystals for Light‐Emitting Applications

An intense single‐band blue emission at λ=450 nm is observed from Tm³⁺ ions through Ce³⁺ sensitization, for the first time, in colloidal Ce³⁺/Tm³⁺‐doped NaYF₄ nanocrystals. The intense Tm³⁺ emission through broad‐band excitation is advantageous for developing luminescent nanocomposites because they can be easily incorporated into polymers. The composites can easily be coated over UV light‐emitting diodes (LEDs) to develop phosphor‐based blue LEDs.     

Synthesis and surface modification of ultrasmall monodisperse NaYF4:Yb3+/Tm3+ upconversion nanoparticles

The emerging upconversion nanoparticles (UCNP) have gained substantial consideration in the field of bioanalytical as well as diagnostic applications. Therefore, great progress has been made in the synthesis and surface modification of luminescent UCNPs over the last two decades. In this paper, we have reported monodispersed and high luminescent upconversion nanoparticles NaYF₄: 20%Yb³⁺, 2%Tm³⁺ have been synthesized using a solvothermal method, followed by a coating of the NaYF₄ shell with a thin layer of SiO₂ on the surface to afford the core-shell NaYF₄:Yb³⁺, Tm³⁺@SiO₂ nanoparticles (NP@SiO₂). The prepared nanoparticles were of strong upconversion fluorescent emission intensity, hexagonal phase, and with an average size of about 8 ± 1 nm, which have been characterized by luminescence spectroscopy, powder X-ray diffraction (P-XRD), Dynamic light scattering (DLS), and Transmission electron microscopy (TEM). The results indicate that the NP@SiO₂ can be used for the conjugation of fluorescent probes for various biomolecules and can find applications in cancer cell imaging and disease diagnosis.     

Synthesis of 10 nm β‐NaYF4:Yb,Er/NaYF4 Core/Shell Upconversion Nanocrystals with 5 nm Particle Cores

A new method is presented for preparing gram amounts of very small core/shell upconversion nanocrystals without additional codoping of the particles. First, ca. 5 nm β‐NaYF₄:Yb,Er core particles are formed by the reaction of sodium oleate, rare‐earth oleate, and ammonium fluoride, thereby making use of the fact that a high ratio of sodium to rare‐earth ions promotes the nucleation of a large number of β‐phase seeds. Thereafter, a 2 nm thick NaYF₄ shell is formed by using 3–4 nm particles of α‐NaYF₄ as a single‐source precursor for the β‐phase shell material. In contrast to the core particles, however, these α‐phase particles are prepared with a low ratio of sodium to rare‐earth ions, which efficiently suppresses an undesired nucleation of β‐NaYF₄ particles during shell growth.     

Novel Au/La‐SrTiO3 microspheres: Superimposed Effect of Gold Nanoparticles and Lanthanum Doping in Photocatalysis

Novel multielement Au/La‐SrTiO₃ microspheres were synthesized by a solvothermal method using monodisperse gold and La‐SrTiO₃ nanocrystals as building blocks. The porous Au/La‐SrTiO₃ microspheres had a large surface area of 94.6 m² g^?1. The stable confined Au nanoparticles demonstrated strong surface plasmon resonance effect, leading to enhanced absorption in a broad UV/Vis/NIR range. Doping of rare‐earth metal La also broadened the absorption band to the visible region. Both the conduction and valence bands of Au/La‐SrTiO₃ microspheres thus show favorable potential for proton reduction under visible light. The superimposed effect of Au nanoparticles and La doping in Au/La‐SrTiO₃ microspheres led to high photocurrent density in photoelectrochemical water splitting and good photocatalytic activity in photodegradation of rhodamine B. The photocatalytic activities are in the order of the following: Au/La‐SrTiO₃ microspheres>Au/SrTiO₃ microspheres>La‐SrTiO₃ microspheres>SrTiO₃ microspheres.     

Strong Stokes and Upconversion Luminescence from Ultrasmall Ln3+‐Doped BiF3 (Ln=Eu3+, Yb3+/Er3+) Nanoparticles Confined in a Polymer Matrix

Heavy metal fluorides like BiF₃ as a host for lanthanide ions are of interest as bismuth is the only heavy metal that is nontoxic. In this work, we report the synthesis of highly water‐dispersible ultrasmall BiF₃ nanoparticles about 6 nm in size within a poly(vinyl pyrrolidone) matrix by a hydrothermal method. Microscopy analysis reveals that the nanoparticles are well separated and confined within the polymer network. These nanoparticles were found to be excellent hosts for lanthanide (Ln³⁺) ions. Through suitable Ln³⁺ doping, BiF₃ exhibits strong emissions in the visible region upon both UV and near infrared (NIR) excitations. The non‐toxicity of both bismuth and PVP can be advantageous for the potential use of BiF₃ nanoparticles in drug delivery and bioimaging.     

Synthesis,properties and mechanism of photodegradation of core–shell structured upconversion luminescent NaYF4:Yb3+,Er3+@BiOCl

Microspherical bismuth oxychloride (BiOCl) can only utilize ultraviolet (UV) light to promote photocatalytic reactions. To overcome this limitation, a uniform and thin BiOCl nanosheet was synthesized with a particle size of about 200 nm. As results of UV–visible diffuse reflectance spectroscopy showed, the band gap of this nanostructure was reduced to 2.78 eV, indicating that the BiOCl nanosheet could absorb and utilize visible light. Furthermore, the upconversion material NaYF₄ doped with rare earth ions Yb³⁺ and Er³⁺ emitted visible light at 410 nm following excitation with near‐infrared (NIR) light (980 nm), which could be utilized by BiOCl to produce a photocatalytic reaction. To produce a high‐efficiency photocatalyst (NaYF₄:Yb³⁺,Er³⁺@BiOCl), BiOCl‐loaded NaYF₄:Yb³⁺,Er³⁺ was successfully synthesized via a simple two‐step hydrothermal method. The as‐synthesized material was confirmed using X‐ray diffraction, scanning electron microscopy, X‐ray photoelectron spectroscopy as well as other characterizations. The removal ratio of methylene blue by NaYF₄:Yb³⁺,Er³⁺@BiOCl was much higher than that of BiOCl alone. Recycling experiments verified the stability of NaYF₄:Yb³⁺,Er³⁺@BiOCl, which demonstrated excellent adsorption, strong visible‐light absorption and high electron–hole separation efficiency. Such properties are expected to be useful in practical applications, and a further understanding of the NIR‐light‐responsive photocatalytic mechanism of this new catalytic material would be conducive to improving its structural design and function.     

Synthesis,characterization, and in vitro toxicity evaluation of upconversion luminescence NaLuF4:Yb3+/Tm3+ nanoparticles suitable for medical applications

Synthesis, characterization, and in vitro toxicity evaluation of upconversion luminescence NaLuF₄:Yb³⁺/Tm³⁺ nanoparticles (UCLNPs) are reported in the current study. Initially, the synthesized lanthanide trifluoroacetate (Ln(OOCCF₃)₃) precursor was used to fabricate NaLuF₄ nanoparticles doped with Yb³⁺ and Tm³⁺ metal ions. The nanoparticles were coated with calcium carbonate (CaCO₃) after removing the hydrophobic species on them to enhance their biocompatibility. The in vitro methylthiazolyldiphenyl-tetrazoliumbromide (MTT) test was used to evaluate the toxicity of synthesized NaLuF₄:Yb³⁺/Tm³⁺ nanoparticles (NLF-5) on L929 mouse fibroblast cell lines. The transmission electron microscopy image showed that the particle size of NaLuF₄:Yb³⁺/Tm³⁺ was 32 nm. The synthesized NLF-5 nanoparticles have both α-cubic and β-hexagonal crystalline structures that provided a superb near-infrared-to-near-infrared upconversion luminescence signal when excited at 980 nm. MTT test results show that the death of L929 fibroblast cells was observed only at concentrations above 250 μg/mL of NaLuF₄:Yb³⁺/Tm³⁺ nanoparticles. In addition, with an increase in patrol time of 24, 48, and 72 hr, cell toxicity increased significantly, while the coated nanoparticles did not have any toxic effects. The synthesized nanoparticles could be used as a suitable material for medical applications due to their small particle size, high photoluminescence emission intensity, and low toxicity.     

Controllable Red,Green, Blue (RGB) and Bright White Upconversion Luminescence of Lu2O3:Yb3+/Er3+/Tm3+ Nanocrystals through Single Laser Excitation at 980 nm

Light fantastic! Lu₂O₃:Yb³⁺/Er³⁺/Tm³⁺ nanocrystals with controllable red, green, blue (RGB) and bright white upconversion luminescence by a single laser excitation of 980 nm have been successfully synthesized (see picture). Due to abundant UC PL colors, it can potentially be used as fluorophores in the field of color displays, back light, UC lasers, photonics, and biomedicine.

     

Synthesis and Infrared Multi‐band Absorption Properties of Core‐shell NaYF4:Yb3+, Er3+@SiO2 Nanoparticles

Due to the unique size effects, nanomaterials in infrared absorption have attracted much attention for their strong absorption in the infrared region. To achieve the infrared multi‐band absorption, we propose to synthesize a core‐shell structure nanomaterial consisting of NaYF₄:Yb³⁺, Er³⁺ core and a layer of SiO₂ as shell. A series of NaYF₄:Yb³⁺, Er³⁺ nanocrystals were synthesized through hydrothermal method by adjusting the ratio of citric acid(CA)‐to‐NaOH, and the effects of CA concentration, and NaOH concentration were studied in detail. NaYF₄:Yb³⁺, Er³⁺@SiO₂ nanoparticles were synthesized by sol‐gel method using TEOS as silica source. The results show that the core‐shell NaYF₄:Yb³⁺, Er³⁺@SiO₂ nanoparticles were successfully synthesized. Up‐conversion spectra of these nanoparticles were recorded with 980 nm laser excitation under room temperature. There are no changes of the emission centers of nanoparticles before or after silica coating, but the emission intensities of nanoparticles after silica coating are weakened. Furthermore, the property of infrared multi‐band absorption was tested through ultraviolet‐visible‐near infrared spectrophotometer and infrared absorption spectra. The results illustrate that the multi‐band infrared absorption nanomaterial was successfully synthesized.     

Synthesis,Persistent Luminescence,and Thermoluminescence Properties of Yellow Sr3SiO5:Eu2+,RE3+ (RE=Ce,Nd, Dy,Ho, Er,Tm, Yb) and Orange‐Red Sr3−xBaxSiO5:Eu2+, Dy3+ Phosphor

Sunlight‐excitable orange or red persistent oxide phosphors with excellent performance are still in great need. Herein, an intense orange‐red Sr_3?xBa_xSiO₅:Eu²⁺,Dy³⁺ persistent luminescence phosphor was successfully developed by a two‐step design strategy. The XRD patterns, photoluminescence excitation and emission spectra, and the thermoluminescence spectra were investigated in detail. By adding non‐equivalent trivalent rare earth co‐dopants to introduce foreign trapping centers, the persistent luminescence performance of Eu²⁺ in Sr₃SiO₅ was significantly modified. The yellow persistent emission intensity of Eu²⁺ was greatly enhanced by a factor of 4.5 in Sr₃SiO₅:Eu²⁺,Nd³⁺ compared with the previously reported Sr₃SiO₅:Eu²⁺, Dy³⁺. Furthermore, Sr ions were replaced with equivalent Ba to give Sr_3?xBa_xSiO₅:Eu²⁺,Dy³⁺ phosphor, which shows yellow‐to‐orange‐red tunable persistent emissions from λ=570 to 591 nm as x is increased from 0 to 0.6. Additionally, the persistent emission intensity of Eu²⁺ is significantly improved by a factor of 2.7 in Sr_3?xBa_xSiO₅:Eu²⁺,Dy³⁺ (x=0.2) compared with Sr₃SiO₅:Eu²⁺,Dy³⁺. A possible mechanism for enhanced and tunable persistent luminescence behavior of Eu²⁺ in Sr_3?xBa_xSiO₅:Eu²⁺,RE³⁺ (RE=rare earth) is also proposed and discussed.     

Biomimetic Synthesis of Metal Ion‐Doped Hierarchical Crystals Using a Gel Matrix: Formation of Cobalt‐Doped LiMn2O4 with Improved Electrochemical Properties through a Cobalt‐Doped MnCO3 Precursor

We have synthesized spinel type cobalt‐doped LiMn₂O₄ (LiMn_2?yCo_yO₄, 0≤y≤0.367), a cathode material for a lithium‐ion battery, with hierarchical sponge structures via the cobalt‐doped MnCO₃ (Mn_1‐xCo_xCO₃, 0≤x≤0.204) formed in an agar gel matrix. Biomimetic crystal growth in the gel matrix facilitates the generation of both an homogeneous solid solution and the hierarchical structures under ambient condition. The controlled composition and the hierarchical structure of the cobalt‐doped MnCO₃ precursor played an important role in the formation of the cobalt‐doped LiMn₂O₄. The charge–discharge reversible stability of the resultant LiMn_1.947Co_0.053O₄ was improved to ca. 12 % loss of the discharge capacity after 100 cycles, while pure LiMn₂O₄ showed 24 % loss of the discharge capacity after 100 cycles. The parallel control of the hierarchical structure and the composition in the precursor material through a biomimetic approach, promises the development of functional materials under mild conditions.     

Synthesis,Structure, and Photoluminescence Properties of Novel KBaSc2(PO4)3:Ce3+/Eu2+/Tb3+ Phosphors for White‐Light‐Emitting Diodes

A series of novel KBaSc₂(PO₄)₃:Ce³⁺/Eu²⁺/Tb³⁺phosphors are prepared using a solid‐state reaction. X‐ray diffraction analysis and Rietveld structure refinement are used to check the phase purity and crystal structure of the prepared samples. Ce³⁺‐ and Eu²⁺‐doped phosphors both have broad excitation and emission bands, owing to the spin‐ and orbital‐allowed electron transition between the 4f and 5d energy levels. By co‐doping the KBaSc₂(PO₄)₃:Eu²⁺ and KBaSc₂(PO₄)₃:Ce³⁺ phosphors with Tb³⁺ ions, tunable colors from blue to green can be obtained. The critical distance between the Eu²⁺ and Tb³⁺ ions is calculated by a concentration quenching method and the energy‐transfer mechanism for Eu²⁺→Tb³⁺ is studied by utilizing the Inokuti–Hirayama model. In addition, the quantum efficiencies of the prepared samples are measured. The results indicate that KBaSc₂(PO₄)₃:Eu²⁺,Tb³⁺ and KBaSc₂(PO₄)₃:Ce³⁺,Tb³⁺ phosphors might have potential applications in UV‐excited white‐light‐emitting diodes.     

Direct Synthesis of PbO Nanoparticles From a Lead(II) Nano Coordination Polymer Precursor: Synthesis,Crystal Structure,and DFT Calculations of [Pb2(dmp)2(μ‐N3)2(μ‐ClO4)2]n with the First Pb2‐(μ‐ClO4)2 Unit

Nanostructures of a new coordination polymer of divalent lead with the ligand 2, 9‐dimethyl‐1, 10‐phenanthroline (dmp) containing the first Pb₂‐(μ‐ClO₄)₂ motif, [Pb₂(dmp)₂(μ‐N₃)₂(μ‐ClO₄)₂]_n ( 1 ), was synthesized by a sonochemical method that produces the coordination polymers at nano size. The new nanostructure was characterized by scanning electron microscopy, X‐ray powder diffraction, IR, ¹H NMR and ¹³C NMR spectroscopy, and elemental analysis. Compound 1 was structurally characterized by single‐crystal X‐ray diffraction and the single‐crystal X‐ray data shows that the coordination number of Pb^II ions is six, (PbN₄O₂), with two N‐donor atoms from aza‐aromatic base ligands and four O‐donors from two perchlorate anions and two N‐donors from two azide anions. It has a “stereo‐chemically active” electron lone pair, and the coordination sphere is hemidirected. The supramolecular features in these complexes are guided and controlled by weak directional intermolecular interactions. The chains interact with each other through π–π stacking interactions creating a 3D framework. The structure of the title complex was optimized by density functional theory calculations. Calculated structural parameters and IR spectra for the title complex are in agreement with the crystal structure. The PbO nanoparticles were obtained by thermolysis of 1 at 180 °C with oleic acid as a surfactant. The average diameter of the nanoparticles was estimated by the Scherrer equation to be 23 nm. The morphology and size of the prepared PbO samples were further observed using SEM.