Antistaphylococcal and antistreptococcal killing kinetics of ciprofloxacin, ofloxacin, sparfloxacin, and trovafloxacin

BACKGROUND: Use of blood culture studies for early diagnosis of Mycobacterium avium complex (MAC) infection has become important due to the recent development of effective antibiotic therapy for this condition. This study assessed the abdominal computed tomography (CT) findings in patients with AIDS who presented with bacteraemic MAC infection. METHODS: A retrospective analysis of abdominal CT scans was performed in 24 patients who presented with MAC-positive blood culture. CT images were reviewed specifically to evaluate for lymph node enlargement and attenuation, hepatomegaly, splenomegaly, bowel wall abnormality and for any other pathological changes. Comparison was made to prior reports of the CT findings in this disease process. RESULT: Enlarged intra-abdominal mesenteric and/or retroperitoneal lymph nodes were found in 10 patients (42%). These nodes were characterized by homogeneous, soft-tissue attenuation in eight of the 10 patients. Hepatomegaly, splenomegaly and small bowel wall thickening were noted in 12 (50%), 11 (46%) and four (14%) patients, respectively. CT findings were evaluated as normal in six (25%) patients. CONCLUSIONS: Enlarged mesenteric and/or retroperitoneal lymph nodes in AIDS patients with bacteraemic MAC were observed much less frequently on CT than previously reported in AIDS patient populations. Normal abdominal CT findings do not exclude this diagnosis and may reflect a trend towards earlier detection of MAC disease.     

Postantibiotic effect and postantibiotic sub-MIC effect of levofloxacin compared to those of ofloxacin, ciprofloxacin, erythromycin, azithromycin, and clarithromycin against 20 pneumococci

The postantibiotic effect (PAE) (10 times the MIC of quinolones, 5 times the MIC of macrolides) and postantibiotic sub-MIC effect (PAE-SME) at 0.125, 0.25, and 0.5 times the MIC were determined for levofloxacin, ciprofloxacin, ofloxacin, erythromycin, azithromycin, and clarithromycin against 20 pneumococci. Quinolone PAEs ranged between 0.5 and 6.5 h, and macrolide PAEs ranged between 1 and 6 h. Measurable PAE-SMEs (in hours) at the three concentrations were 1 to 5, 1 to 8, and 1 to 8, respectively, for quinolones and 1 to 8, 1 to 8, and 1 to 6, respectively, for macrolides.     

Efficacy of spray application of chlorinated water in killing pathogenic bacteria on raw apples, tomatoes, and lettuce

Washing whole and cut produce by dipping or submerging in chlorinated water has a sanitizing effect, although reduction in microbial populations is minimal and is usually less than 100-fold. A study was undertaken to evaluate the efficacy of a spray application of chlorine in killing Salmonella, Escherichia coli O157:H7, Listeria monocytogenes, yeasts and molds, and total aerobic mesophilic microorganisms on whole apples, tomatoes, and lettuce leaves. Inoculated produce was treated (sprayed and then soaked) with water (control) or solutions containing 200 or 2,000 ppm of chlorine for 0, 1, 3, 5, or 10 min, rinsed with sterile water, and analyzed for populations (CFU/cm2) of target microorganisms. Compared to the control treatment, further reductions in numbers of pathogens of 0.35 to 2.30 log CFU/cm2 were achieved by treatment with chlorine. Chlorine was generally more effective at 2,000 ppm than at 200 ppm. Inactivation of microorganisms occurred essentially within 1 min after application of chlorine. These reductions are significant relative to populations of pathogenic microorganisms that may be present on produce. Spray application of chlorine to raw produce at food service or household levels may be a suitable, and more convenient, alternative to treatment by dipping or submersion.     

Structure, elemental and phase compositions, and phase transformation kinetics in Ti-Ni-Nb Shape memory alloys

The structure of Ti-Ni-Nb shape memory alloys available from various producers is studied by electron-probe microanalysis and X-ray diffraction. The elemental and phase compositions of the alloys are determined, and their microstructure and the kinetics and temperatures of phase transformations are studied. These properties are investigated on samples in the as-delivered state (cast or pressed) and after heat treatment. The possibility of applying these alloys in industry is estimated.     

On the rule of additivity in phase transformation kinetics

It is commonly held that a sufficient condition for the rule of additivity to be valid is that the transformation rate depend only on temperature and volume fraction. This is not true in general.     

Increased activity of a new chlorofluoroquinolone, BAY y 3118, compared with activities of ciprofloxacin, sparfloxacin, and other antimicrobial agents against anaerobic bacteria

A total of 435 clinical isolates of anaerobes were tested with a broth microdilution method to determine the activity of BAY y 3118 compared with those of other agents against anaerobic bacteria. All strains of Bacteroides capillosus, Prevotella spp., Porphyromonas spp., Fusobacterium spp., Clostridium spp., Eubacterium spp., Peptostreptococcus spp., and Veillonella parvula were susceptible (MICs of < or = 2 micrograms/ml) to BAY y 3118. Against the 315 strains of the Bacteroides fragilis group, five strains required elevated MICs (> or = 4 micrograms/ml) of BAY y 3118. Only imipenem and metronidazole were active against all anaerobes. Overall, BAY y 3118 was more active than ciprofloxacin, sparfloxacin, piperacillin, cefotaxime, and clindamycin against the test isolates.     

Phagocytosis and killing of suspended and adhered bacteria by peritoneal cells after dialysis

OBJECTIVE: To determine the effect of dialysis fluid containing various glucose concentrations on the phagocytosis and killing of Staphylococcus aureus by rat peritoneal cells under conditions mimicking the in vivo situation. DESIGN: Phagocytosis and killing were evaluated by quantitation of the killing capacity of macrophages after in vivo phagocytosis of the bacteria as well as by an in vitro flow cytometric assay of the phagocytosis and killing of adhered bacteria by peritoneal cells. ANIMALS: Male Wistar rats. MAIN OUTCOME MEASURE: It was expected that the intraperitoneal administration of dialysis fluid would impair the capacity of peritoneal cells to eliminate bacteria. RESULTS: The first test revealed no effects of glucose concentration or dwell time on the killing of phagocytosed bacteria by macrophages, median percentages ranging between 29% and 64%. In the second series of experiments no effect of glucose concentration on the phagocytosis and killing of adhered bacteria was found either; however, longer dwell times significantly enhanced both the phagocytosis (at a dwell time of 1 hour, under 20%; at dwell times of 4 or 18 hours, above 20%, p < 0.02) and the killing (at a dwell time of 1 hour, under 53%; at dwell times of 4 and 18 hours, above 70%, p < 0.01). CONCLUSIONS: Glucose concentration has no effect on the phagocytosis and killing of Staphylococcus aureus, whereas the dwell time significantly enhances both of these functional capacities of peritoneal cells if the bacteria are adhered to surfaces.     

Saxs and tem study of the kinetics of phase separation in Al-Zn

Kinetics of phase separation and coarsening in Al-22 at.% Zn-0.1 at. % Mg, from very early to very late annealing times, has been studied by correlating the time evolution of the small-angle X-ray scattering spectrum and the microstructure, as revealed by transmission electron microscopy. Three kinetic regimes were recognized. The dominant coarsening mechanisms were interpreted as arising from cluster coagulation at early times and single atom diffusion at late times. The intermediate times probably combined both. The microstructure consisted of interconnected spherical clusters at early times and regularly spaced platelets at late times; with a mixture of both during the transition period. At later annealing times, the intensity spectra exhibited a “shoulder” whose appearance was associated with the change of morphology. The intensity spectra from different times could all be made to coincide on one curve through appropriate scaling, provided the microstructure was not changing during that time period. Simple analytical forms described the shape of the scaled intensity curves.     

The effect of transformation stresses on the devitrification kinetics of a minory phase in liquid phase sintered ceramics

The crystallization of minory amorphous constituents in liquid phase sintered ceramics, for example in Si₃N₄, is usually accompanied by a volume change. The resulting mismatch between crystallizing second phase inclusions and the surrounding matrix of the primary phase leads to the formation of transformation stresses. The strain energy stored in the stress field reduces the thermodynamic driving force of crystallization. The coupling of crystallization, stress formation and relaxation is modelled. The extended duration of the crystallization process due to an intermediate stress induced decrease of the crystallization rate is assessed. The properties of amorphous grain boundary films are discussed with respect to stress relaxation and creep resistance at high temperatures.     

On the kinetics of phase separation in aqueous two-phase systems

The effect of the tie-line location (phase volume ratio) on the kinetics of phase separation in batch PEG/salt aqueous two-phase systems (ATPS) has been investigated. PEG/sulphate systems with a stability ratio (sr) of 0.34 and 0.37 and relative tie-line lengths in the range 0.1 to 0.6 for a continuous top phase and in the range 0.03 to 0.15 for a continuous bottom phase were used in the batch studies. A continuous settler was designed with three different inlet geometries. Phase separation is much faster when the bottom phase is continuous and in this case the location on the tie-line and the presence or absence of Bacillus subtilis extract makes little difference. When the top phase is continuous the relative sizes of the phases (phase ratio, R. relative distance on tie-line, rd) has an important effect, the larger the top phase (larger R and rd) the slower the phase separation. The presence of Bacillus extract also makes the operation slower which is more marked at the largest values of R (and rd). At the largest volume ratios (R or rd) three different settling regions have been recognised, a region of coalescence, a region of drops moving to the interphase and a region where drops queue at the interphase to coalesce into the large phase. A modified correlation that takes into account the location on the tie-line and thus volume ratio (R) and relative distance (rd) has been proposed and successfully tested. The behavior of batch and continuous systems in the presence and absence of Bacillus subtilis extract in systems with continuous bottom phase was also studied. The settling velocity was lower in the continuous than in the batch systems, and in both cases the initial rate was lower in the presence of Bacillus extract.     

Studies on kinetics of strain ageing in Nb,Ti, V-bearing HSLA steels and a dual-phase steel

Strain-ageing behaviour of different high-strength low-alloy (HSLA) and dual-phase steels was investigated. Single factor experiments were carried out to decide on the range of variation of variables for construction of the matrix of experimental design. Quantitative relationships between time and temperature of ageing (within a narrow range) at constant pre-strain, with increase of yield strength after strain ageing was developed in the form of regression equations by applying statistical design of experiments. Validity of these equations was checked by statistical method as well as by random experiments. Activation energies for strain ageing of these steels were determined by using the developed regression equations. These values were in close agreement with the values reported by other investigators.     

Chlorination kinetics of a niobium pyrochlore in the Gas-Solid phase

The chlorination kinetics of a niobium (columbium) pyrochlore has been studied in the gas-solid phase, for temperatures between 1373 and 1573 K, using a high temperature differential tungsten reactor. Chlorine-helium mixtures were used which contained between 0 and 60 pet helium. It is shown that the kinetic study reduces to one of CaNb₂O₆ chlorination. In order to obtain information on the true reaction mechanisms involved and avoid side effects like difficulty of access of the reactant gas throughout the sample mass subjected to reaction, the reaction rate has been determined from decreasing amounts of initial solid sample. The reaction rate obtained by extrapolation to nil sample values was considered to be the true reaction rate that would be observed if a single particle were subjected to chlorination with the prevailing conditions. Using a reactant gas flow rate which provided a purely chemical reaction process (no film diffusion effects), it has been found that the reaction is of the continuous-reaction type model, while the reaction rate is nearly first order with respect to the chlorine concentration at the solid-gas interface. The rate constants are 0.21 (at 1373 K), 0.46 (at 1473 K) and 0.92 (at 1573 K) min⁻¹.atm⁻¹. The energy of activation was found equal to 129 KJ/mol. The theoretical maximum error, calculated from a knowledge of the error made on temperature, time, sample weight and Nb₂O₅ analysis, does affect the reaction order by ± 20 pct, the reaction rate by ± 20 pct and the energy of activation by ± 25 pct.     

Comparative antimycobacterial activities of the newly synthesized quinolone AM-1155, sparfloxacin, and ofloxacin

AM-1155 is a newly synthesized 6-fluoro-8-methoxy quinolone. We assessed its in vitro antimycobacterial activity using sparfloxacin (SPFX) and ofloxacin (OFLX) as comparison drugs. The MICs of these agents for various mycobacterial strains were determined by the agar dilution method with 7H11 medium. AM-1155 had lower MICs for 50 and 90% of tested strains of Mycobacterium kansasii, M. marinum, and M. fortuitum-M. chelonae complex than SPFX and OFLX, and the values for M. tuberculosis, M. scrofulaceum, and the M. avium-M. intracellulare complex were similar to those of SPFX and considerably lower than those of OFLX. In addition, the antimicrobial activity of AM-1155 against M. tuberculosis and M. intracellulare phagocytosed into murine peritoneal macrophages was compared with that of OFLX. AM-1155 (1 microgram/ml) inhibited the intracellular growth of both M. tuberculosis and M. intracellulare, whereas OFLX at the same concentration failed to show any such effect. Moreover, AM-1155 (10 micrograms/ml) exhibited a steady bactericidal action against M. tuberculosis, whereas OFLX at the same concentration had only a weak effect. AM-1155 (10 micrograms/ml) also inhibited the growth of M. intracellulare more effectively than OFLX.     

Solidification kinetics and metastable phase formation in binary Ti-Al

Near-equiatomic alloys of Ti-Al were solidified at various bulk undercoolings using electromagnetic levitation. Detailed thermal histories were acquired during experiments using optical pyrometry with sampling rates as fast as 500 KHz. Solidification and other high-temperature transformation pathways were deduced from the thermal data and microstructural analysis. Re- calescence rise times were used to determine semiquantitative primary solidification kinetics for the different phases. Primary β solidification was observed at compositions well into the equi- librium α regime; this is presented as part of a near-equiatomic nucleation domain diagram mat shows the primary solidification phase (β, α, ordered γ, or disordered γ) that results for each combination of nucleation temperature and composition. Solidification kinetics are faster for primary β (V_max ≈ 15 to 18 m s^-1) than they are for primary α (V_max ≈ 10 to 12 m s^-1). For undercoolings less than about 150 K, the primary solidification kinetics are about an order of magnitude slower for γ than for α. However, at an undercooling of about 150 K, the solidi- fication kinetics for γ increase discontinuously. This discontinuity is associated with a change in the primary solidification phase from ordered γ (V_max ≈ 0.5 m s^-1) to disordered γ (V_max ≈ 10 m s^-1). formerly Doctoral Student, Vanderbilt formerly Doctoral Student, Vanderbilt formerly Doctoral Student, Vanderbilt     

Studies on dissolution kinetics of dolime in electrothermal magnesium slag

The electrothermal process of magnesium metal production is a promising route, where large sized internally heated reactor is used for magnesium production resulting in less energy and labour intensive and high space-time yield process. However, the dissolution behavior of dolime in the electrothermal slag has been found critical for the process optimization. In this paper, the dissolution kinetics of the dolime in the slag was discussed. Quaternary slag (CaO-Al₂O₃-SiO₂-MgO) was prepared having basicity CaO/SiO₂ ≥ 1.8 and Al₂O₃/SiO₂ ≥ 0.26 for dolime dissolution studies by static hot dip method. Prior to the experiments, FactSage calculations were carried out varying temperatures and slag compositions. In the kinetic studies, dolime particles 10–15 mm size was added in slag melted at 1450, 1500 and 1550°C and samples were taken at various time intervals. The chemical analysis of slag sample was carried out to investigate the dissolution kinetics to establish the rate expression. The activation energy for the process was calculated for different models used in study and was found to be in the range of 130–270 kJ/mol. SEM analysis was done for surface analysis of reacted particles. This study would be helpful in optimizing the dolime charging rate during pilot scale trials for electrothermal magnesium production at CSIR-NML, Jamshedpur.     

Studies on the kinetics of carbon tetrachloride chlorination of tantalum pentoxide

Studies on the kinetics of chlorination of tantalum pentoxide powder by carbon tetrachloride vapor in dilution with nitrogen have been carried out by weight-loss measurements in two temperature ranges, i.e., 698 to 773 K and 793 to 853 K. The effect of time, temperature, and partial pressure of CCl₄ on the kinetics of chlorination of the powder Ta₂O₅, (−105+74 μm) has been investigated. In both the temperature ranges, the chlorination results have been found to fit the following relationship during the “initial periods:”

Duration and clinical relevance of postantibiotic effect in relation to the dosing interval

The influence of half-life on the postantibiotic effect (PAE) of tobramycin against Pseudomonas aeruginosa and Staphylococcus aureus was investigated during one dosing interval. Tobramycin half-lives of 0.5 to 2.5 h were simulated in an in vitro model, and the PAE was determined by an enzymatic inactivation method at different time points, i.e., when the tobramycin concentrations were 20x, 5x, and 1x the MIC. At the time point during therapy when the tobramycin concentrations had declined to 1x the MIC, at a tobramycin half-life of 0.5 h, the times of the PAEs were approximately 0.7 and 1.7 h for P. aeruginosa and S. aureus, respectively, and the PAE disappeared completely at half-lives corresponding to those found in humans (i.e., 2 to 2.5 h). The PAE itself cannot be fully explained by the presence of free intrabacterial tobramycin or the emergence of resistant subpopulations. The explanation for the disappearance of the PAE during the dosing interval may therefore be explained by the repair of sublethal damage. Since the standard method of determining the PAE in animal models is somewhat different from the method used for measurement of the PAE in vitro, the conditions under which the PAE is measured in vivo were also simulated in the in vitro model. This resulted in PAEs longer than those found by the standard method of obtaining in vitro PAE measurements. We conclude that the PAE of tobramycin, as determined by conventional in vitro methods, has virtually no clinical importance. PAEs determined in vivo may have some clinical relevance, but they are probably primarily caused by sub-MIC effects.     

Investigation of absorption kinetics by the phase plane method

PURPOSE: To develop a simple approach for investigating absorption kinetics, which does not require modeling assumption or intravenous data. METHODS: The concentration (C) -time (t) data are plotted as a phase plane plot (dCldt versus C). Errorless C,t data were generated from one and two compartment models employing first-order, zero-order and Michaelis-menten input kinetics, and the phase plane plots were constructed. A simple test based on the ratio of slopes of the separate linear regression analyses of absorption and elimination data of the phase plane plot is proposed to justify or not the presence of zero order input kinetics. Errant data were used to assess the performance of the test developed. Literature data of theophylline and nitroglycerin formulations were analyzed using the phase plane plot. Input rate-time profiles were constructed for one compartment model drugs utilizing the data of the phase plane plot. RESULTS: The geometric forms of the phase plane plots derived form the errorless data of the various pharmacokinetic models were found to be indicative of the absorption kinetics. Very good resulted were obtained when the test for he discernment of absorption kinetics was applied to errant data. Zero-order absorption kinetics were justified (i) for the transdermal absorption of nitroglycerin and (ii) only for a certain period of time, for the gastrointestinal absorption of theophylline. CONCLUSIONS: Investigation of absorption kinetics can be accomplished with the phase plane method. The cumulative character of the classical percent absorbed versus time plots can be misleading in justifying the presence of zero-order input kinetics.     

Bacteriological, pharmacokinetic and clinical evaluation of azithromycin in the pediatric field]

Azithromycin (AZM), a new macrolide antibiotic, in fine granules and in capsules was studied for pharmacokinetic and clinical evaluation in the pediatric patients. Antibacterial activity of AZM against 43 clinical isolates: AZM exhibited slightly lower activity against Gram-positive bacteria and 2-8-fold higher activity against Gram-negative bacteria than erythromycin or clarithromycin. Plasma or urine samples were collected from eight patients receiving the drug in fine granular form, and two patients receiving it in capsules for the determination of drug levels. The elimination half-lives of AZM after administration at dose of 10 mg/kg/day for 3 days were 50.0 and 51.2 hours for fine granules, and 41.5 hours for capsules. AUC0-infinity was 11.7 and 24.3 micrograms.hr/ml for fine granules, and 8.3 micrograms.hr/ml for capsules. The cumulative excretion rates up to 120 hours after the start of treatment were 8.24 and 13.84% for fine granules, and 3.83% for capsules. AZM was administered to 123 patients once daily at 3.7-20.0 mg/kg body weight over 3 to 5 days with reference to the standard dose of 10 mg/kg. The drug was used to treat patients with pharyngitis, tonsillitis, scarlet fever, pneumonia, mycoplasmal pneumonia, chlamydial pneumonia, otitis media, pertussis, intestinal infection, and SSTI. The effectiveness of AZM was evaluated in 109 cases. The drug was rated "excellent" in 65.1% of the patients and "good" in 29.4%, resulting in an efficacy rate of 94.5%. Furthermore, AZM eradicated 43 of 46 (93.5%) bacteria that had been identified before the treatment. Three patients complained of side effects of urticaria (1 case) and diarrhea (2 cases). Abnormal laboratory changes were reported as follows: decreased leukocyte (3 cases), increased eosinophil (5), increased platelet (2), increased eosinophil and platelet, elevated GPT (1), and elevated GOT and GPT (1). The abnormalities, however, were mild enough to raise no clinically significant problems. In conclusion, AZM in once daily regimen was effective and safe in treatment of pediatric infections.