基于DSC后推法的非线性系统的鲁棒自适应NN控制

针对一类具有不确定系统函数和方向未知的不确定增益函数的非线性系统, 提出了一种鲁棒自适应神经网络控制算法. 本算法采用RBF神经网络(Radial based function neural network, RBF NN)逼近模型不确定性, 外界干扰和建模误差采用非线性阻尼项进行补偿, 将动态面控制(Dynamic surface control, DSC)与后推方法结合, 消除了反推法的计算膨胀问题, 降低了控制器的复杂性; 尤其是采用Nussbaum函数处理系统中方向未知的不确定虚拟控制增益函数, 不仅可以避免可能存在的控制器奇异值问题, 而且还能使得整个系统的在线学习参数显著减少, 与DSC方法优点结合, 使得控制算法的计算量大为减少, 便于计算机实现. 稳定性分析证明了所得闭环系统是半全局一致最终有界(Semi-global uniformly ultimately bounded, SGUUB)的, 并且跟踪误差可以收敛到原点的一个较小邻域. 最后, 计算机仿真结果表明了本文所提出控制器的有效性.     

随机时滞系统的神经网络输出反馈动态面控制

针对一类具有未知控制方向的随机时滞系统设计自适应神经输出反馈控制器.首先,利用状态观测器估计不可测量的系统状态;其次,选择合适的Lyapunov-Krasovskii函数消除未知延迟项对系统的影响,利用Nussbaum-type函数处理系统的未知控制方向问题,通过神经网络逼近未知的非线性函数,以及用动态表面控制(DSC)解决控制器设计中出现的复杂性问题;最后,通过Lyapunov稳定性理论,构造一个鲁棒自适应神经网络输出反馈控制器,可以保证闭环系统中所有信号在二阶或四阶矩意义下一致最终有界,跟踪误差能收敛到零值小的领域内.仿真实例验证了所提出方法的有效性.     

控制增益符号未知的MIMO时滞系统自适应控制

针对一类带有死区模型并具有未知函数控制增益的不确定MIMO非线性时滞系统,基于滑模控制原理和Nussbaum函数的性质,提出了一种稳定的自适应神经网络控制方案.该方案放宽了对函数控制增益上界为未知常数的假设,并通过使用Lyapunov-Krasovskii泛函抵消了因未知时变时滞带来的系统不确定性.理论分析证明,闭环系统是半全局一致终结有界.仿真结果表明了该方法的有效性.     

含有未知控制方向的非线性时滞系统学习控制

本文对于一类含有未知控制方向及时滞的非线性参数化系统,设计了自适应迭代学习控制算法.在设计控制算法过程中采用了参数分离技术和信号置换思想来处理系统中出现的时滞项,Nussbaum增益技术解决未知控制方向等问题.为了对系统中出现的未知时变参数和时不变参数进行估计,分别设计了差分及微分参数学习律.然后通过构造的Lyapunov-Krasovskii复合能量函数给出了系统跟踪误差渐近收敛及闭环系统中所有信号有界的条件.最后通过一个仿真例子说明了控制器设计的有效性.     

带有输入和状态时滞的高阶非线性前馈系统的自适应控制

本文考虑了一类高阶不确定非线性前馈系统的自适应镇定问题.将高阶非线性进一步放宽到不仅允许状态时滞,而且还具有未知增长率.通过将自适应方法、动态增益控制方法和增加幂次积分器法结合,设计了一个状态反馈控制器.所设计的控制器保证了闭环系统的所有信号有界,平衡点全局稳定,并且原状态收敛到0.     

时变时滞非线性系统自适应神经网络控制

对于一类具有未知时变时滞和虚拟控制系数的不确定严格反馈非线性系统,基于后推设计提出一种自适应神经网络控制方案.选取适当的Lyapunov-Krasovskii泛函补偿未知时变时滞不确定项.通过构造连续的待逼近函数来解决利用神经网络对未知非线性函数进行逼近时出现的奇异问题.通过引入一个新的中间变量,保证了虚拟控制求导的正确性.仿真算例表明,所设计的控制器能保证闭环系统所有信号是半全局一致终结有界的,且跟踪误差收敛到零的一个邻域内.     

一类具有匹配时滞状态扰动的非线性系统自适应鲁棒镇定

讨论了一类具有时滞状态扰动的非线性系统的自适应鲁棒镇定问题,所考虑的时滞状态扰动的上界与时变函数相关并且含有未知参数.通过自适应律估计未知参数,并且利用估计值设计了鲁棒控制器.同时,基于Lyapunov_Krasovskii函数,证明了闭环系统具有一致最终有界意义下的鲁棒稳定性.最后,通过一个数值例子的仿真验证了结论的正确性.     

非仿射系统的自适应观测器自抗扰控制

研究了一类单输入单输出(SISO)非仿射非线性系统的控制问题,通过微分同胚变换以及自抗扰思想将该类形式转化成含有未知非线性且控制增益未知的仿射形式.引入扩展状态自适应观测器以及Nussbaum-type增益技术,利用积分反演和调节函数技术,设计了自抗扰控制器.从理论上证明了所设计的控制器能够保证闭环系统所有信号全局一致有界,并且证明了跟踪误差渐近收敛到零点的残集内.仿真例子验证了算法的有效性.     

一种简化的自适应神经网络输出反馈镇定

针对一类输出反馈非线性时滞系统,提出一种简化的自适应神经网络镇定算法.所设计的状态观测器和控制器不依赖于时滞.不同于现有的结果,系统的时滞项假定完全未知,仅采用一个神经网络补偿所有未知非线性函数,因此控制器设计更加简单,而且最终的闭环系统被证明是半全局渐近稳定的.仿真结果进一步验证了该控制方案的有效性.     

一类非仿射非线性不确定系统自适应鲁棒控制

针对一类结构和参数均未知且控制方向未知的不确定非仿射非线性系统,提出了一种鲁棒自适应控制算法.基于中值定理将非仿射系统转化为具有线性结构的时变系统,在此基础上,利用参数投影估计算法对有界时变参数进行辨识,参数辨识误差和外界干扰采用非线性阻尼项进行补偿.同时将动态面控制(DSC)和反推法相结合,消除了反推法的计算膨胀问题,并采用Nussbaum型函数处理系统中方向未知的不确定控制增益函数,避免了可能存在的控制器奇异值问题.最后,采用解耦反推,基于李雅普诺夫稳定性定理证明了闭环系统的半全局一致最终有界.仿真结果验证了所设计控制方案的可行性与有效性.     

Adaptive fuzzy control for unknown nonlinear time-delay systems with virtual control functions

In this paper, adaptive fuzzy control is presented for a class of unknown nonlinear timedelay systems with virtual control functions. By employing fuzzy logic systems and the technique of delay replacement, dynamic surface control (DSC) design approach can be carried out with both unknown delay signals and nonlinearities. This is different from the existing results, which are used to make limitations on the time-delays. It is proved that the proposed design method is able to guarantee semiglobal uniform ultimate boundedness (SGUUB) of all signals in the closed-loop system, with arbitrary small tracking error by appropriately choosing design constants.     

Fuzzy adaptive output feedback control for a class of switched non-triangular structure nonlinear systems with time-varying delays

This paper investigates an adaptive fuzzy output feedback control design problem for switched nonlinear system in non-triangular structure form. The discussed system contains unknown nonlinear dynamics, unmeasured states and unknown time-varying delays under a batch of switching signals. Fuzzy logic systems are utilised to learn unknown nonlinear dynamics and construct a fuzzy switched nonlinear observer. By combining the property of fuzzy basis function with Lyapunov–Krasovskii functional and the command filter, a novel observer-based fuzzy adaptive backstepping schematic design algorithm is presented. Furthermore, the stability of the closed-loop control system is proved via Lyapunov stability theory and average dwell time method. The simulation results are presented to verify the validity of the proposed control scheme.     

分散自适应模糊滑模控制器的设计与分析

研究了一类具有函数控制增益的耦合大系统的分散自适应模糊控制问题 ,提出了能够利用专家的语言信息和数字信息的分散自适应模糊滑模控制器的设计方案 .通过理论分析 ,证明了分散自适应模糊控制系统是全局稳定的 ,跟踪误差可收敛到零的一个邻域内     

一类大系统的分散自适应模糊滑模控制

研究了一类具有未知函数控制增益的非线性大系统的分散模糊控制问题.基于滑模 控制原理和模糊集理论,提出了一种分散自适应模糊控制器的设计方法.通过理论分析,证明 了分散自适应模糊控制系统是全局稳定的,跟踪误差可收敛到零的一个领域内.     

Adaptive Fuzzy Finite-time Dynamic Surface Control for High-order Nonlinear System with Output Constraints

This paper studies the problem of finite-time fuzzy adaptive dynamic surface control (DSC) design for a class of single-input and single-output (SISO) high-order nonlinear systems with output constraint. Fuzzy logic systems (FLSs) are utilized to identify the unknown smooth functions. By adopting Barrier Lyapunov function (BLF), the problem of output constrain is handled. Combining adding a power integrator and adaptive backstepping recursion design technique, a novel fuzzy adaptive finite-time DSC algorithm is proposed. Based on finite-time Lyapunov stable theory, the developed control algorithm means that all the signals of the closed-loop system are semi-global practical finite-time stable (SGPFS) and the tracking error converges to a small neighborhood of origin in finite time. In addition, the output does not violate the given constrain bound. Finally, both numerical and practical simulation examples are given to illustrate the effectiveness of the proposed control algorithm.

     

船舶航向非线性系统的多滑模自适应模糊控制

针对参数未知的船舶航向非线性控制系统数学模型,在考虑舵机伺服机构特性的情况下,船舶航向控制问题就成为一个虚拟控制系数未知的非匹配不确定非线性控制问题.基于多滑模设计方法和模糊逻辑系统的逼近能力,提出了一种多滑模自适应模糊控制算法,通过引入非连续投影算法和积分型Lyapunov函数,提高了系统在抑制参数漂移、控制器奇异等方面的能力.借助Lyapunov函数证明了所设计控制器使最终的闭环非匹配不确定船舶运动非线性系统中的所有信号有界,且跟踪误差收敛到零.仿真研究表明:该算法与传统的PID控制相比,具有较好的跟踪能力和自适应能力.     

Adaptive fuzzy decentralised fault-tolerant control for nonlinear large-scale systems with actuator failures and unmodelled dynamics

This paper discusses the adaptive fuzzy decentralised fault-tolerant control (FTC) problem for a class of nonlinear large-scale systems in strict-feedback form. The systems under study contain the unknown nonlinearities, unmodelled dynamics, actuator faults and without the direct measurements of state variables. With the help of fuzzy logic systems identifying the unknown functions and a fuzzy adaptive observer is designed to estimate the unmeasured states. By using the backstepping design technique and the dynamic surface control approach and combining with the changing supply function technique, a fuzzy adaptive FTC scheme is developed. The main features of the proposed control approach are that it can guarantee the closed-loop system to be input–to-state practically stable, and also has the robustness to the unmodelled dynamics. Moreover, it can overcome the so-called problem of ‘explosion of complexity’ existing in the previous literature. Finally, simulation studies are provided to illustrate the effectiveness of the proposed approach.     

Adaptive Fuzzy Dynamic Surface Control of Flexible-Joint Robot Systems With Input Saturation

In this paper, we propose an adaptive fuzzy dynamic surface control (DSC) scheme for single-link flexible-joint robotic systems with input saturation. A smooth function is utilized with the mean-value theorem to deal with the difficulties associated with input saturation. An adaptive DSC design with an auxiliary first-order filter is used to solve the "explosion of complexity" problem. It is proved that all the signals in the closed-loop system are semi-globally uniformly ultimately bounded, and the tracking error eventually converges to a small neighborhood around zero. The main advantage of the proposed method is that only one adaptation parameter needs to be updated, which reduces the computational burden significantly. Simulation results demonstrate the feasibility of the proposed scheme and the comparison results show that the improved DSC method can reduce the computational burden by almost two thirds in comparison with the standard DSC method.      

Adaptive fuzzy backstepping control for a class of switched nonlinear systems with actuator faults

This paper investigates the problem of fault-tolerant control (FTC) for a class of switched nonlinear systems. These systems are under arbitrary switchings and are subject to both lock-in-place and loss-of-effectiveness actuator faults. In the control design, fuzzy logic systems are used to identify the unknown switched nonlinear systems. Under the framework of the backstepping control design, FTC, fuzzy adaptive control and common Lyapunov function stability theory, an adaptive fuzzy control approach is developed. It is proved that the proposed control approach can guarantee that all the signals in the closed-loop switched system are semi-globally uniformly ultimately bounded (SGUUB) and the tracking error remains an adjustable neighbourhood of the origin. Two simulation examples are provided to illustrate the effectiveness of the proposed approach.     

一种简化的自适应模糊动态面控制

针对一类不确定非线性时变时滞系统,提出了一种简化的自适应模糊动态面控制方法.该方法取消了对系统时滞常做的假设.仅采用一个模糊逼近器便使所有的未知函数得到补偿,简化了控制器的结构.通过构造合适的Lyapunov-Krasovskii泛函,闭环系统的所有信号被证明为半全局一致最终有界.仿真实例进一步验证了控制方案的有效性.