Removal of Methylene Blue from Aqueous Solutions by using Cold Plasma,Microwave Radiation and Formaldehyde Treated Acorn Shell

In this paper, cold plasma (CPTAS), formaldehyde (FTAS), and microwave radiation treated (MTAS) acorn shell obtained from Quercus petraea tree as biosorbent was characterized and its dye removal ability at different dye concentrations was studied. The isoelectric point, functional groups and morphology of acorn shell was investigated as adsorbent surface characteristics. Fourier transform infrared (FTIR), scanning electron microscopy (SEM), and UV–Vis spectrophotometry were used. Methylene blue (MB) was used as model cationic dye. The Langmuir and Freundlich adsorption isotherm models were applied to describe the equilibrium isotherms. The results indicated that the data for adsorption of MB onto treated acorn shell fitted well with the Langmuir isotherm model. Comparison of adsorption capacities of CPTAS with FTAS has shown a significant increase by as much as about 30 mg/g (33.32%) in MB adsorption.The pseudo-first order, pseudo-second order kinetic models were examined to evaluate the kinetic data, and the rate constants were calculated. Adsorption kinetic of dyes followed pseudo-first order kinetics. Thermodynamic parameters such as free energy, enthalpy, and entropy of dye adsorption were obtained. The results indicated that acorn shell could be used as a natural biosorbent for the removal of cationic dyes.     

EFFECT OF TEMPERATURE ON THE ADSORPTION OF METHYLENE BLUE DYE ONTO SULFURIC ACID–TREATED ORANGE PEEL

The present study explains the preparation and application of sulfuric acid–treated orange peel (STOP) as a new low-cost adsorbent in the removal of methylene blue (MB) dye from its aqueous solution. The effects of temperature on the operating parameters such as solution pH, adsorbent dose, initial MB dye concentration, and contact time were investigated for the removal of MB dye using STOP. The maximum adsorption of MB dye onto STOP took place in the following experimental conditions: pH of 8.0, adsorbent dose of 0.4 g, contact time of 45 min, and temperature of 30°C. The adsorption equilibrium data were tested by applying both the Langmuir and Freundlich isotherm models. It is observed that the Freundlich isotherm model fitted better than the Langmuir isotherm model, indicating multilayer adsorption, at all studied temperatures. The adsorption kinetic results showed that the pseudo-second-order model was more suitable to explain the adsorption of MB dye onto STOP. The adsorption mechanism results showed that the adsorption process was controlled by both the internal and external diffusion of MB dye molecules. The values of free energy change (ΔG ^o) and enthalpy change (ΔH ^o) indicated the spontaneous, feasible, and exothermic nature of the adsorption process. The maximum monolayer adsorption capacity of STOP was also compared with other low-cost adsorbents, and it was found that STOP was a better adsorbent for MB dye removal.     

Application of graphene-based adsorbents in the treatment of dye-contaminated wastewater; kinetic and isotherm studies

The adsorption of methylene blue (MB) on graphene-based adsorbents was tested through the batch experimental method. Two types of graphene-based adsorbents as graphene oxide (GO) and reduced graphene oxide (RGO) were compared to investigate the best adsorbent for MB removal. So that optimizing the MB removal for the selected type of graphene-based adsorbent, the diverse experimental factors, as pH (2–10), contact time (0–1440 min), adsorbent dosage (0.5–2 g/L), and initial MB concentration (25–400 mg/L) were analyzed. The conclusions indicated that the MB removal rised with an increase in the initial concentration of the MB and so rises in the amount of adsorbent used and initial pH. Maximum dye removal was calculated as 99.11% at optimal conditions after 240 min. Adsorption data were compiled by the Langmuir isotherm (R²: 0.999) and pseudo-second-order kinetic models (R²: 0.999). The Langmuir isotherm model accepted that the homogeneous surface of the GO adsorbent covering with a single layer. And the adsorption energy was calculated as 9.38 kJ mol⁻¹ according to the D-R model indicating the chemical adsorption occurred. The results show that GO could be utilized for the treatment of dye-contaminated aqueous solutions effectively.     

Removal of methylene blue from aqueous solution by adsorption onto zeolite synthesized from coal fly ash and its thermal regeneration

BACKGROUND: The removal of cationic dyes from wastewater is of great importance. Three zeolites synthesized from coal fly ashes (ZFAs) were investigated as adsorbents to remove methylene blue (MB), a cationic dye, from aqueous solutions. Experiments were conducted using the batch adsorption technique under different conditions of initial dye concentration, adsorbent dose, solution pH, and salt concentration. RESULTS: The adsorption isotherm data of MB on ZFAs were fitted well to the Langmuir model. The maximum adsorption capacities of MB by the three ZFAs, calculated using the Langmuir equation, ranged from 23.70 to 50.51 mg g^?1. The adsorption of MB by ZFA was essentially due to electrostatic forces. The measurement of zeta potential indicated that ZFA had a lower surface charge at alkaline pH, resulting in enhanced removal of MB with increasing pH. MB was highly competitive compared with Na⁺, leading to only a < 6% reduction in adsorption in the presence of NaCl up to 1.0 mol L^?1. Regeneration of used ZFA was achieved by thermal treatment. In this study, 90–105% adsorption capacity of fresh ZFA was recovered by heating at 450 °C for 2 h. CONCLUSION: The experimental results suggest that ZFA could be employed as an adsorbent in the removal of cationic dyes from wastewater, and the adsorptive ability of used ZFA can be recovered by thermal treatment. Copyright © 2010 Society of Chemical Industry     

Application of Aqai Stalks as Biosorbents for the Removal of the Dye Procion Blue MX-R from Aqueous Solution

The aqai palm stalk (Euterpe oleracea) is a food residue used in its natural form (AS) and also protonated (AAS) as biosorbents for the removal of the textile dye Procion Blue MX-R from aqueous solutions. This biosorbent was characterized by infrared spectroscopy, scanning electron microscopy, and nitrogen adsorption-desorption curves. The effects of pH, biosorbent dosages, and shaking time on the biosorption capacities were studied. In the acidic pH region (pH 2.0) the biosorption of the dye was favorable. The minimum contact time to obtain the equilibrium was 8 hours for AS and AAS biosorbents. The general order kinetic model provided the best fit to the experimental data compared with the pseudo-first order and pseudo-second order kinetic adsorption models. The equilibrium data were fitted to the Langmuir, Freundlich, and Sips isotherm models. For both dyes the equilibrium data were best fitted to the Sips isotherm model. The enthalpy and entropy of adsorption of PB were obtained from adsorption equilibrium experiments ranging from 298 to 323 K. Simulated dyehouse effluent was used to check the applicability of the proposed adsorbents for effluent treatment.     

Structure and properties of forming adsorbents prepared from different particle sizes of coal fly ash

In this paper, different particle sizes of coal fly ash FA-R (D50=15.75μm), FA-A (D50=3.61μm) and FA-B (D50=1.73μm) were treated with NaOH solution to prepare the forming adsorbents FFA-R, FFA-A and FF...     

原料粒度对粉煤灰成型吸附剂结构和性能的影响(英文)

In this paper, different particle sizes of coal fly ash FA-R (D50=15.75μm), FA-A (D50=3.61μm) and FA-B (D50=1.73μm) were treated with NaOH solution to prepare the forming adsorbents FFA-R, FFA-A and FFA-B. The structure and adsorption properties of the forming adsorbents for methylene blue (MB) from aqueous solu-tion were examined. The results showed that the specific surface areas and adsorption capacities of the forming adsorbent for MB increased with decreasing particle size of raw coal fly ashes. The adsorption kinetic data of MB on FFA-R, FFA-A and FFA-B fitted the second-order kinetic model very wel with the rate constants (k2) of 3.15 × 10?2, 3.84 × 10?2 and 6.27 × 10?2 g·mg?1·min?1, respectively. The adsorption process was not only con-trol ed by intra-particle diffusion. The isotherms of MB on FFA-R, FFA-A and FFA-B can be described by the Lang-muir isotherm and the Freundlich isotherm, and the adsorption processes were spontaneous and exothermic. ? 2014 The Chemical Industry and Engineering Society of China, and Chemical Industry Press. Al rights reserved.     

Application of succinylated sugarcane bagasse as adsorbent to remove methylene blue and gentian violet from aqueous solutions - Kinetic and equilibrium studies

In a previous work, succinylated sugarcane bagasse (SCB 2) was prepared from sugarcane bagasse (B) using succinic anhydride as modifying agent. In this work the adsorption of cationic dyes onto SCB 2 from aqueous solutions was investigated. Methylene blue, MB, and gentian violet, GV, were selected as adsorbates. The capacity of SCB 2 to adsorb MB and GV from aqueous single dye solutions was evaluated at different contact times, pH, and initial adsorbent concentration. According to the obtained results, the adsorption processes could be described by the pseudo-second-order kinetic model. Adsorption isotherms were well fitted by Langmuir model. Maximum adsorption capacities for MB and GV onto SCB 2 were found to be 478.5 and 1273.2 mg/g, respectively.     

Adsorption of anionic dye on eco-friendly synthesised reduced graphene oxide anchored with lanthanum aluminate: Isotherms,kinetics and statistical error analysis

In the present study we made an effort to deploy eco-friendly synthesized reduced graphene oxide/Lanthanum Alluminate nanocomposites (RGO-LaAlO₃) and Lanthanum Alluminate (LaAlO₃) as adsorbents to remove dye from the synthetic media. XRD, SEM, BET surface area and EDX have been used to characterize the above-mentioned adsorbents. The impacts of different factors like adsorbent dosage, the concentration of adsorbate and PH on adsorption were studied. The best fit linear and nonlinear equations for the adsorption isotherms and kinetic models had been examined. The sum of the normalized errors and the coefficient of determination were used to determine the best fit model. The experimental data were more aptly fitted for nonlinear forms of isotherms and kinetic equations. Pseudo-second-order and Freundlich isotherm model fits the equilibrium data satisfactorily. Methyl orange (MO) has been used as model dye pollutant and maximum adsorption capacity was found to be 469.7 and 702.2 mg g^?1 for LaAlO₃ and RGO-LaAlO₃, respectively.     

Removal of methylene blue from aqueous solutions by adsorption onto chemically activated halloysite nanotubes

This study examines the adsorption behavior of methylene blue (MB) from aqueous solutions onto chemically activated halloysite nanotubes. Adsorption of MB depends greatly on the adsorbent dose, pH, initial concentration, temperature and contact time. The Langmuir and Freundlich models were applied to describe the equilibrium isotherms and the Langmuir model agrees very well with experimental data. The maximum adsorption capacities for MB ranged from 91.32 to 103.63 mg·g⁻¹ between 298 and 318 K. A comparison of kinetic models applied to the adsorption data was evaluated for pseudo-first-order, pseudo-second-order, Elovich and intra-particle diffusion equation. The results showed the adsorption process was well described by the pseudo-second-order and intra-particle diffusion mode. Thermodynamic parameters suggest that the adsorption is spontaneous and endothermic. The obtained results indicated that the product had the potential to be utilized as low-cost and effective alternative for dye removal in wastewater.     

Removal of Selected Basic Dyes using Activated Carbon from Tannery Wastes

Activated carbon prepared from tannery leather waste (TLW-AC) has been studied for its efficiency of removal of basic dyes, namely rhodamine B (RB), methylene blue (MB), and malachite green (MG) from aqueous solutions. Factors influencing dye adsorption such as the concentration of dye, pH, contact time, and temperature were investigated. The adsorption was found to be strongly dependent on the pH and temperature. The maximum sorption capacity of RB was obtained at pH 3 and for MB and MG was obtained at pH 11. Various thermodynamic parameters such as ΔG°, ΔH°, and ΔS° were calculated. The kinetic studies reveal that the adsorption process follows the pseudo second-order kinetic model. The equilibrium data have been well-described by the Langmuir and Freundlich models, and the data fitted well in both model equations. The study revealed that wastes from leather industry is an economically viable option for dye removal.     

Adsorption of methylene blue from aqueous solution by kaolin and zeolite

In the present study, kaolin and zeolite have been utilized as adsorbents for the removal of a cationic dye, methylene blue (MB), from aqueous solution within a batch process. Characterization of the two adsorbents was carried out by nitrogen adsorption–desorption experiments (specific surface area measurements by the BET method). The effects of various parameters such as initial MB concentration, contact time, adsorbent concentration, stirring speed, solution pH and salt concentration were examined and optimal experimental conditions were determined. The kinetic data were analyzed using pseudo-first-order and pseudo-second-order models. The mass transfer model in terms of interlayer diffusion was applied to the experimental data to examine the mechanisms of the rate controlling step. In order to determine the best-fit-isotherm, the experimental data were analyzed by the Freundlich, Temkin, and Dubinin–Radushkevich equation which are found to best represent the equilibrium data for kaolin and zeolite. The values of activation parameters such as free energy (ΔG), enthalpy (ΔH) and entropy (ΔS) were also determined. The results indicate that kaolin and zeolite could be interesting alternative materials with respect to more costly adsorbents used for dye removal.     

Palladium,silver, and zinc oxide nanoparticles loaded on activated carbon as adsorbent for removal of bromophenol red from aqueous solution

The adsorption of bromophenol red (BPR) onto three adsorbents including palladium, silver and zinc oxide nanoparticles loaded on activated carbon (Pd-NP-AC, Ag-NP-AC and ZnO-NP-AC) in a batch system has been studied and the influence of various parameters has been optimized. The influence of time on removal of BPR on all adsorbent was investigated and experimental data were analyzed by four kinetic models including pseudo first and second-order, Elovich and the intraparticle diffusion equations. Following fitting the experimental data to these models, the respective parameters of each model such as rate constants, equilibrium adsorption capacities and correlation coefficients for each model were investigated and based on well known criterion their applicability was judged. It was seen that the adsorption of BPR onto all adsorbents sufficiently described by the pseudo second-order equation in addition to interparticle diffusion model. The adsorption of BPR on all adsorbent was investigated at various concentration of dye and the experimental equilibrium data were analyzed and fitted to the Langmuir, Freundlich, Tempkin, Dubinin, and Radushkevich equations. A single stage in batch process was efficient and suitable for all adsorbents using the Langmuir isotherm with maximum adsorption of 143 mg g^?1 for Pd-NP-AC, 250 mg g^?1 for Ag-NP-AC and 200 mg g^?1 for ZnO-NR-AC. Thermodynamic parameters such as ΔG°, ΔH°, and ΔS° for Pd-NP-AC adsorbent were calculated.     

Investigation of Cationic Dye Adsorption from Water onto Acetic Acid Lignin

An adsorbent was prepared from acetic acid lignin (AAL) to investigate the adsorption mechanism of methylene blue (MB) from water. AAL was first deacetylated in NaOH aqueous solution and then fractionated by methanol to prepare adsorbents with various acidic hydroxy groups. The adsorption capacities of MB increased with the increase in initial pH and with the decrease in adsorbent dosage. The results of adsorption kinetics indicated the dye uptake process is a chemisorption. The adsorption capacity of lignin for MB adsorption increased from 18.2 to 63.3 mg g^?1 as AAL was deacetylated and fractionated.     

Adsorption and kinetic studies of methylene blue on modified HUSY zeolite and an amorphous mixture of γ-alumina and silica

ABSTRACT

Our work focuses on the study of the adsorption of methylene blue (MB) on adsorbents based on zeolite HUSY and (γAl₂O₃-SiO₂). To optimize the process of removing MB onto Ni/Co USY, different parameters were studied such as contact time, initial pH, initial dye concentration, zero charge’s point, and adsorbent dosage. The adsorption isotherm follows the Langmuir model. The maximum adsorption capacities of MB were 59.88 mg g^?1 for Ni/Co USY and 43.86 mg g^?1 for Ni/Co (γAl-Si) at 298°K. The thermodynamic parameters and activation energy’s values obtained suggested that the adsorption was a physical process, spontaneous, and endothermic in nature. MB adsorption on Ni/Co USY may occur via electrostatic interaction, hydrogen bonding, and Lewis acid–base interaction.     

Mineral waste from coal mining for removal of astrazon red dye from aqueous solutions

The use of mineral waste from coal mining (MWCM) as an adsorbent for the removal of astrazon red dye (AR) from aqueous solution was studied in detail. Batch adsorption experiments were carried out under varied conditions, such as different initial concentrations of AR, contact time, pH, temperature and calcination of the adsorbent. Investigations revealed that the maximum colour removal was observed for unbuffered solutions. MWCM calcinated at 400 °C (MWCM400) was more efficient for dye removal than samples calcinated at other temperatures. The adsorption isotherm of AR on MWCM400 was determined and correlated with the Langmuir and Freundlich models; the results indicated a better fit for the Langmuir model at all the temperatures studied. Kinetic data were fitted with both pseudo-first-order and pseudo-second-order kinetic models, and the data were found to follow the latter model more adequately. Calculated thermodynamic and kinetic parameters indicate a predominantly physisorption mechanism for the adsorption of AR onto MWCM400. The amount of AR adsorbed by MWCM400 per unit area was found to be two or three times greater than that by several comparable adsorbents.     

New carbon composite adsorbents for the removal of textile dyes from aqueous solutions: Kinetic,equilibrium, and thermodynamic studies

New carbon composite materials were prepared by pyrolysis of mixture of coffee wastes and red mud at 700 °C with the inorganic: organic ratios of 1.9 (CC-1.9) and 2.2 (CC-2.2). These adsorbents were used to remove reactive orange 16 (RO-16) and reactive red 120 (RR-120) textile dyes from aqueous solution. The CC-1.9 and CC-2.2 materials were characterized using Fourier transform infrared spectroscopy, Nitrogen adsorption/desorption curves, scanning electron Microscopy and X-ray diffraction. The kinetic of adsorption data was fitted by general order kinetic model. A three-parameter isotherm model, Liu isotherm model, gave the best fit of the equilibrium data (298 to 323 K). The maximum amounts of dyes removed at 323 K were 144.8 (CC-1.9) and 139.5 mg g^?1 (CC-2.2) for RO-16 dye and 95.76 (CC-1.9) and 93.80 mg g^?1 (CC-2.2) for RR-120 dye. Two simulated dyehouse effluents were used to investigate the application of the adsorbents for effluent treatment.     

Equilibrium and Kinetic Studies on Lithium Adsorption from Geothermal Water by λ-MnO2

The adsorption equilibria of lithium from geothermal water were investigated by using both powdery and granulated forms of λ-MnO₂ derived from spinel-type lithium manganese dioxide. Optimum amounts of adsorbents were 1.0 g adsorbent/L-geothermal water for powdery λ-MnO₂ and 6.0 g adsorbent/L-geothermal water for granulated λ-MnO₂. The adsorbents exhibited the promising adsorption capacities and their adsorption equilibria of lithium agreed well with the Langmuir adsorption isotherm model. The kinetic data of lithium adsorption have been evaluated using pseudo-first-order, pseudo-second-order kinetics models, as well as Elovich kinetic model. In addition, intra-particle diffusion model has been used for evaluating the kinetic data to evaluate the adsorption mechanism. The adsorption kinetic process was attributed to the gradual adsorption stage where intra-particle diffusion was found as the rate-controlling step.     

Comparison of Cr(VI) Adsorption Using Synthetic Schwertmannite Obtained by Fe3+ Hydrolysis and Fe2+ Oxidation: Kinetics,Isotherms and Adsorption Mechanism

Good sorption properties and simple synthesis route make schwertmannite an increasingly popular adsorbent. In this work, the adsorption properties of synthetic schwertmannite towards Cr(VI) were investigated. This study aimed to compare the properties and sorption performance of adsorbents obtained by two methods: Fe³⁺ hydrolysis (SCH_A) and Fe²⁺ oxidation (SCH_B). To characterise the sorbents before and after Cr(VI) adsorption, specific surface area, particle size distribution, density, and zeta potential were determined. Additionally, optical micrographs, SEM, and FTIR analyses were performed. Adsorption experiments were performed in varying process conditions: pH, adsorbent dosage, contact time, and initial concentration. Adsorption isotherms were fitted by Freundlich, Langmuir, and Temkin models. Pseudo-first-order, pseudo-second-order, intraparticle diffusion, and liquid film diffusion models were used to fit the kinetics data. Linear regression was used to estimate the parameters of isotherm and kinetic models. The maximum adsorption capacity resulting from the fitted Langmuir isotherm is 42.97 and 17.54 mg·g⁻¹ for SCH_A and SCH_B. Results show that the adsorption kinetics follows the pseudo-second-order kinetic model. Both iron-based adsorbents are suitable for removing Cr(VI) ions from aqueous solutions. Characterisation of the adsorbents after adsorption suggests that Cr(VI) adsorption can be mainly attributed to ion exchange with SO₄²⁻ groups.