电子产品环境应力筛选试验

为了使环境应力筛选试验在有效提高电子产品的可靠性方面得以广泛应用,介绍了环境应力筛选试验的概念,针对电子产品,论述了环境应力筛选典型应力参数的确定方法、加电检测的原则、筛选度和故障率的计算、筛选中暴露的典型缺陷等。提出了环境应力筛选试验的一般程序和一些需注意的问题。     

电路板环境应力筛选方法效能分析

论述了对设计、工艺成熟电路板组件的环境应力筛选方法,对比恒定高温、温度循环、温度冲击、振动及其组合筛选的筛选度,并进行效能比分析。通过对比各种应力对有较大共性的电路板组件筛选的分析,对GJB 1032进行适当裁减,提出了不少于10个温度循环加随机振动的筛选组合,以适应电路板板级筛选要求,提高效能比。     

环境应力筛选中的温度循环加速因子模型分析

为了进一步理清环境应力筛选（Ess）中温循加速因子的特性及使用条件,分别从筛选度（ss）和阿伦尼斯（Arrhenius）模型2个不同的角度对现有的2种温度循环加速因子模型进行了分析。通过对2种模型的对比以及模型与实际情况间差距的分析,明确了它们的使用范围及使用中的注意事项,指出了这2种加速模型存在的缺陷及其发展趋势。     

ESS试验温度循环次数确定方法研究

介绍了环境应力筛选温度循环试验数学模型,通过雷达单元实际筛选数据统计建模计算,在相同的温度范围、温变速率条件下,进行筛选度和循环次数的理论与实际数据对比分析,得出了确定雷达组成电子单元温度循环试验循环次数的方法和修正系数。     

电子产品环境应力筛选温度稳定性测试研究

以GJB 150,GJB 1032中温度稳定测试方法为基础,通过对比温度稳定时间在不同标准中的要求与不同的测试方法,把GJB 1032中的温度稳定的测试方法及分析方法应用于实际电子产品,采用非接触式测量和接触式测量获得了产品的温场分布及产品在环境应力筛选时的温度稳定时间。     

环境应力筛选技术及其应用问题分析

介绍了环境应力筛选的发展历程,目前的3种主要类型及应用情况,以及其作为一种生产工艺的基本特点,并对其在具体实施过程中存在的问题进行了分析,如动态管理、认识误区和工艺细节控制的统一性等,最后提出了尽快修订GJB 1032使其与国际先进标准接轨等建议。     

环境应力筛选与应力激发试验

结合工程实践体会,探讨了GJB1032对环境应力筛选规定的几点不合适的要求。通过回顾环境应力筛选的发展,指出了环境应力筛选本质上是一种应力激发试验。并简要介绍了应力激发试验．     

常规试验设备温度循环应力筛选技术改进

目的寻找基于常规试验设备温度循环应力筛选技术的改进方法。方法应用常规温度循环试验箱,结合对军用电子产品进行环境应力筛选(ESS)的实际情况,测量产品在温度循环应力筛选时,产品内部升降温的实际速率,通过对这些测量结果比较分析,找出这一方法存在的问题,特别是缺陷暴露程度与应力筛选的相关性差,通过对温度循环筛选参数的合理选择进行分析,找出解决这一问题的思路。结果理论筛选度较高(如0.89)的试验,实际测算额得出的筛选度很低(如0.54)。结论应用温度循环应力筛选的方法,确立合理的应力参数,就可取得理想的试验效果,节省一半的试验时间。     

高加速应力试验的优点及其应用

阐述了高加速应力试验的本质是通过施加远超过产品设计规范规定的各种应力。快速地将产品内部的薄弱环节和缺陷激发出来,为改进设计和剔除早期故障提供信息。高加速应力试验的优点是可以得到高可靠的产品,且大大缩短产品研制进度和降低成本。列举了国外各公司在电子、机电、机械等设备上成功应用取得的效果,最后指出了影响这一技术推广应用的各种错误观念和认识。     

大鹏湾中表层沉积物的有害要素及其环境质量

依据20多个航次的调查资料,简要描述和分析了大鹏湾表层沉积物中8项有害要素多年的平均分布变化及其环境质量变化.结果表明:绝大多数表层沉积物中的有害要素含量在本湾的西部和北部沿岸区域明显偏高,这说明香港和深圳某些渠道的排放对沿岸区域造成了污染.9a调查期间,香港海区表层沉积物中Pb、Cu、Cr、A8和Hg含量的年际变化趋...     

环境风险全过程评估与管理模式研究及应用

基于环境风险“全过程管理”与“优先管理”的理念,提出了环境风险全过程评估与管理的概念框架和理论体系,涵盖了风险源识别、受体易损性评估、环境风险表征、风险应急控制决策以及风险事故损失后评估等关键步骤.并以某化工园区企业为例,以硝基苯储罐塌陷为初始事件,采用蝴蝶结方法进行风险源识别,得到硝基苯储罐泄漏事件蝴蝶结,通过GIS空间分析方法揭示居民对地表水水源污染易损性的空间分异,分析结果不仅为事故安全防范与应急控制提供关键节点,而且有助于在日常风险管理中增强受体抗风险能力.     

Oxidative stress related enzymes in response to chromium (Ⅵ) toxicity in Oxya chinensis ( Orthoptera : Acridoidae)

The toxic effects of Cr（Vl） on antioxidant enzymes of Oxya chinensis（Orthoptera： Acridoidae） were determined. Changes in the activities of the antioxidant enzymes superoxide dismutase（SOD）, catalase（CAT）, and guaiacol peroxidase（GPx） were measured in O. chinensis insects injected with Cr（VI）. Fifth-nymphs of O. chinensis insects were injected with Cr（VI） with different concentrations （0, 75, 150, 225, 300, 375, 450 mg/kg of body weight）. The results showed that Cr（VI） led to the change of SOD, CAT, and GPx activities at different concentrations, which revealed that： （1） The oxidative stress of SOD increased with the increase of Cr （VI） concentration. （2） With the increase of Cr （VI） concentrations, CAT activities for females increased at lower concentrations, but decreased at higher concentration range, which indicated that antioxidant system of O. chinensis was not influenced by the presence of Cr （VI）. A very similar response to Cr（VI） effect for males indicated that Cr（VI） concentrations were not high enough to damage O. chinensis in terms of CAT. （3） The GPx activity for females increased in all treatments, which revealed that the damage power of Cr（VI） was increased with the increase of Cr（Vi） concentrations in terms of GPx, but the effect was not so remarkable. There was not a consistent trend of GPx activities for males in all treatments of Cr（VI）. Cr（VI）-induced changes in antioxidant enzymes were different for SOD, CAT and GPx, of which the tendency was that activities generally changed with increase of concentrations of Cr（VI） suggesting SOD, CAT, and GPx could serve as indices of oxidative stress to some extent.     

Effects of particle composition and environmental parameters on catalytic hydrodechlorination of trichloroethylene by nanoscale bimetallic Ni-Fe

Catalytic nickel was successfully incorporated into nanoscale iron to enhance its dechlorination efficiency for trichloroethylene （TCE）, one of the most commonly detected chlorinated organic compounds in groundwater. Ethane was the predominant product. The greatest dechlorination efficiency was achieved at 22 molar percent of nickel. This nanoscale Ni-Fe is poorly ordered and inhomogeneous; iron dissolution occurred whereas nickel was relatively stable during the 24-hr reaction. The morphological characterization provided significant new insights on the mechanism of catalytic hydrodcchlorination by bimetallic nanoparticles. TCE degradation and ethane production rates were greatly affected by environmental parameters such as solution pH, temperature and common groundwater ions. Both rate constants decreased and then increased over the pH range of 6.5 to 8.0, with the minimum value occurring at pH 7.5. TCE degradation rate constant showed an increasing trend over the temperature range of 10 to 25℃. However, ethane production rate constant increased and then decreased over the range, with the maximum value occurring at 20℃, Most salts in the solution appeared to enhance the reaction in the first half hour but overall they displayed an inhibitory effect. Combined ions showed a similar effect as individual salts.