Pore‐Surface Engineering by Decorating Metal‐Oxo Nodes with Phenylsilane to Give Versatile Super‐Hydrophobic Metal–Organic Frameworks (MOFs)

Hydrophobization of metal‐organic frameworks (MOFs) is important to push forward their practical use and thus has attracted increasing interest. In contrast to the previous reports, which mainly focused on the modification of organic ligands in MOFs, herein, we reported a novel strategy to decorate the metal‐oxo nodes of MOFs with phenylsilane to afford super‐hydrophobic NH₂‐UiO‐66(Zr), which shows highly improved base resistance and holds great promise in versatile applications, such as organic/water separation, self‐cleaning, and liquid‐marble fabrication. This work demonstrates the first attempt at metal‐oxo node modification for super‐hydrophobic MOFs, advancing a new concept in the design of MOFs with controlled wettability for practical applications.     

Combination of Optimization and Metalated‐Ligand Exchange: An Effective Approach to Functionalize UiO‐66(Zr) MOFs for CO2 Separation

The strategy to functionalize water‐stable metal–organic frameworks (MOFs) in order to improve their CO₂ uptake capacities for efficient CO₂ separation remains limited and challenging. We herein present an effective approach to functionalize a prominent water‐stable MOF, UiO‐66(Zr), by a combination of optimization and metalated‐ligand exchange. In particular, by systematic optimization, we have successfully obtained UiO‐66(Zr) of the highest BET surface area reported so far (1730 m² g^?1). Moreover, it shows a hybrid Type I/IV N₂ isotherm at 77 K and a mesopore size of 3.9 nm for the first time. The UiO‐66 MOF underwent a metalated‐ligand‐exchange (MLE) process to yield a series of new UiO‐66‐type MOFs, among which UiO‐66‐(COONa)₂‐EX and UiO‐66‐(COOLi)₄‐EX MOFs have both enhanced CO₂ working capacity and IAST CO₂/N₂ selectivity. Our approach has thus suggested an alternative design to achieve water‐stable MOFs with high crystallinity and gas uptake for efficient CO₂ separation.     

Surface‐Specific Functionalization of Nanoscale Metal–Organic Frameworks

A method for modifying the external surfaces of a series of nanoscale metal–organic frameworks (MOFs) with 1,2‐dioleoyl‐sn‐glycero‐3‐phosphate (DOPA) is presented. A series of zirconium‐based nanoMOFs of the same topology (UiO‐66, UiO‐67, and BUT‐30) were synthesized, isolated as aggregates, and then conjugated with DOPA to create stably dispersed colloids. BET surface area analysis revealed that these structures maintain their porosity after surface functionalization, providing evidence that DOPA functionalization only occurs on the external surface. Additionally, dye‐labeled ligand loading studies revealed that the density of DOPA on the surface of the nanoscale MOF correlates to the density of metal nodes on the surface of each MOF. Importantly, the surface modification strategy described will allow for the general and divergent synthesis and study of a wide variety of nanoscale MOFs as stable colloidal materials.     

The First Study on the Reactivity of Water Vapor in Metal–Organic Frameworks with Platinum Nanocrystals

We first studied the reactivity of H₂O vapor in metal–organic frameworks (MOFs) with Pt nanocrystals (NCs) through the water–gas shift (WGS) reaction. A water‐stable MOF, UiO‐66, serves as a highly effective support material for the WGS reaction compared with ZrO₂. The origin of the high catalytic performance was investigated using in situ IR spectroscopy. In addition, from a comparison of the catalytic activities of Pt on UiO‐66, where Pt NCs are located on the surface of UiO‐66 and Pt@UiO‐66, where Pt NCs are coated with UiO‐66, we found that the competitive effects of H₂O condensation and diffusion in the UiO‐66 play important roles in the catalytic activity of Pt NCs. A thinner UiO‐66 coating further enhanced the WGS reaction activity of Pt NCs by minimizing the negative effect of slow H₂O diffusion in UiO‐66.     

Spray‐Coating of Catalytically Active MOF–Polythiourea through Postsynthetic Polymerization

A UiO‐66‐NCS MOF was formed by postsynthetic modification of UiO‐66‐NH₂. The UiO‐66‐NCS MOFs displays a circa 20‐fold increase in activity against the chemical warfare agent simulant dimethyl‐4‐nitrophenyl phosphate (DMNP) compared to UiO‐66‐NH₂, making it the most active MOF materials using a validated high‐throughput screening. The ?NCS functional groups provide reactive handles for postsynthetic polymerization of the MOFs into functional materials. These MOFs can be tethered to amine‐terminated polypropylene polymers (Jeffamines) through a facile room‐temperature synthesis with no byproducts. The MOFs are then crosslinked into a MOF–polythiourea (MOF–PTU) composite material, maintaining the catalytic properties of the MOF and the flexibility of the polymer. This MOF–PTU hybrid material was spray‐coated onto Nyco textile fibers, displaying excellent adhesion to the fiber surface. The spray‐coated fibers were screened for the degradation of DMNP and showed durable catalytic reactivity.     

Ultra‐Fast Degradation of Chemical Warfare Agents Using MOF–Nanofiber Kebabs

The threat associated with chemical warfare agents (CWAs) motivates the development of new materials to provide enhanced protection with a reduced burden. Metal–organic frame‐works (MOFs) have recently been shown as highly effective catalysts for detoxifying CWAs, but challenges still remain for integrating MOFs into functional filter media and/or protective garments. Herein, we report a series of MOF–nanofiber kebab structures for fast degradation of CWAs. We found TiO₂ coatings deposited via atomic layer deposition (ALD) onto polyamide‐6 nanofibers enable the formation of conformal Zr‐based MOF thin films including UiO‐66, UiO‐66‐NH₂, and UiO‐67. Cross‐sectional TEM images show that these MOF crystals nucleate and grow directly on and around the nanofibers, with strong attachment to the substrates. These MOF‐functionalized nanofibers exhibit excellent reactivity for detoxifying CWAs. The half‐lives of a CWA simulant compound and nerve agent soman (GD) are as short as 7.3 min and 2.3 min, respectively. These results therefore provide the earliest report of MOF–nanofiber textile composites capable of ultra‐fast degradation of CWAs.     

Intrinsic White‐Light‐Emitting Metal–Organic Frameworks with Structurally Deformable Secondary Building Units

The secondary building units in metal–organic frameworks (MOFs) are commonly well‐defined metal–oxo clusters or chains with very limited structural strain. Herein, the structurally deformable haloplumbate units that are often observed in organolead halide perovskites have been successfully incorporated into MOFs. The resultant materials are a rare class of isoreticular MOFs exhibiting large Stokes‐shifted broadband white‐light emission, which is probably induced by self‐trapped excitons from electron–phonon coupling in the deformable, zigzag [Pb₂X₃]⁺ (X=Cl, Br, or I) chains. In contrast, MOFs with highly symmetric, robust haloplumbate chains only exhibit narrow UV–blue photoemission. The designed MOF‐based intrinsic white‐light photoemitters have a number of advantages over hybrid inorganic–organic perovskites in terms of stability and tunability, including moisture resistance, facile functionalization of photoactive moieties onto the organic linkers, introduction of luminescent guests.     

Nylon–MOF Composites through Postsynthetic Polymerization

Hybridization of metal–organic frameworks (MOFs) and polymers into composites yields materials that display the exceptional properties of MOFs with the robustness of polymers. However, the realization of MOF–polymer composites requires efficient dispersion and interactions of MOF particles with polymer matrices, which remains a significant challenge. Herein, we report a simple, scalable, bench‐top approach to covalently tethered nylon–MOF polymer composite materials through an interfacial polymerization technique. The copolymerization of a modified UiO‐66‐NH₂ MOF with a growing polyamide fiber (PA‐66) during an interfacial polymerization gave hybrid materials with up to around 29 weight percent MOF. The covalent hybrid material demonstrated nearly an order of magnitude higher catalytic activity for the breakdown of a chemical warfare simulant (dimethyl‐4‐nitrophenyl phosphate, DMNP) compared to MOFs that are non‐covalently, physically entrapped in nylon, thus highlighting the importance of MOF–polymer hybridization.     

Gated Channels and Selectivity Tuning of CO2 over N2 Sorption by Post‐Synthetic Modification of a UiO‐66‐Type Metal–Organic Framework

The highly porous and stable metal–organic framework (MOF) UiO‐66 was altered using post‐synthetic modifications (PSMs). Prefunctionalization allowed the introduction of carbon double bonds into the framework through a four‐step synthesis from 2‐bromo‐1,4‐benzenedicarboxylic acid; the organic linker 2‐allyl‐1,4‐benzenedicarboxylic acid was obtained. The corresponding functionalized MOF (UiO‐66‐allyl) served as a platform for further PSMs. From UiO‐66‐allyl, epoxy, dibromide, thioether, diamine, and amino alcohol functionalities were synthesized. The abilities of these compounds to adsorb CO₂ and N₂ were compared, which revealed the structure–selectivity correlations. All synthesized MOFs showed profound thermal stability together with an increased ability for selective CO₂ uptake and molecular gate functionalities at low temperatures.     

A Computational and Experimental Approach Linking Disorder,High‐Pressure Behavior,and Mechanical Properties in UiO Frameworks

Whilst many metal–organic frameworks possess the chemical stability needed to be used as functional materials, they often lack the physical strength required for industrial applications. Herein, we have investigated the mechanical properties of two UiO‐topology Zr‐MOFs, the planar UiO‐67 ([Zr₆O₄(OH)₄(bpdc)₆], bpdc: 4,4′‐biphenyl dicarboxylate) and UiO‐abdc ([Zr₆O₄(OH)₄(abdc)₆], abdc: 4,4′‐azobenzene dicarboxylate) by single‐crystal nanoindentation, high‐pressure X‐ray diffraction, density functional theory calculations, and first‐principles molecular dynamics. On increasing pressure, both UiO‐67 and UiO‐abdc were found to be incompressible when filled with methanol molecules within a diamond anvil cell. Stabilization in both cases is attributed to dynamical linker disorder. The diazo‐linker of UiO‐abdc possesses local site disorder, which, in conjunction with its longer nature, also decreases the capacity of the framework to compress and stabilizes it against direct compression, compared to UiO‐67, characterized by a large elastic modulus. The use of non‐linear linkers in the synthesis of UiO‐MOFs therefore creates MOFs that have more rigid mechanical properties over a larger pressure range.     

Photoinduced Postsynthetic Polymerization of a Metal–Organic Framework toward a Flexible Stand‐Alone Membrane

Metal–organic frameworks (MOFs) are a promising class of nanoporous polymeric materials. However, the processing of such fragile crystalline powders into desired shapes for further applications is often difficult. A photoinduced postsynthetic polymerization (PSP) strategy was now employed to covalently link MOF crystals by flexible polymer chains, thus endowing the MOF powders with processability and flexibility. Nanosized UiO‐66‐NH₂ was first functionalized with polymerizable functional groups, and its subsequent copolymerization with monomers was easily induced by UV light under solvent‐free and mild conditions. Because of the improved interaction between MOF particles and polymer chains, the resulting stand‐alone and elastic MOF‐based PSP‐derived membranes possess crack‐free and uniform structures and outstanding separation capabilities for Cr^VI ions from water.     

A Metal–Organic Framework Containing Unusual Eight‐Connected Zr–Oxo Secondary Building Units and Orthogonal Carboxylic Acids for Ultra‐sensitive Metal Detection

Two metal–organic frameworks (MOFs) with Zr–oxo secondary building units (SBUs) were prepared by using p,p′‐terphenyldicarboxylate (TPDC) bridging ligands pre‐functionalized with orthogonal succinic acid (MOF‐ 1 ) and maleic acid groups (MOF‐ 2 ). Single‐crystal X‐ray structure analysis of MOF‐ 1 provides the first direct evidence for eight‐connected SBUs in UiO‐type MOFs. In contrast, MOF‐ 2 contains twelve‐connected SBUs as seen in the traditional UiO MOF topology. These structural assignments were confirmed by extended X‐ray absorption fine structure (EXAFS) analysis. The highly porous MOF‐ 1 is an excellent fluorescence sensor for metal ions with the detection limit of <0.5 ppb for Mn²⁺and three to four orders of magnitude greater sensitivity for metal ions than previously reported luminescent MOFs.     

Direct synthesis of Fe(III) immobilized Zr‐based metal–organic framework for aerobic oxidation reaction

A Zr‐based metal–organic framework with bipyridine units (UiO‐67) has been utilized for the immobilization of catalytically active iron species via a post‐synthetic metalation method. UiO‐67 bipyridine MOF was synthesized through a simple solvothermal method and was shown to have a UiO‐type structure. Post‐synthetic metalation of UiO‐67 MOF was performed for the immobilization of the catalytically active FeCl₃. FT‐IR and EDX element map suggested that FeCl₃ is coordinately bonded to the UiO‐67 bipyridine framework. The synthesized UiO‐67‐FeCl₃ catalyst was used for the aerobic oxidation of alcohols and benzylic compounds in the presence of molecular oxygen. In addition, the UiO‐67‐FeCl₃ catalyst can be reused as a solid heterogeneous catalyst without compromising its activity and selectivity.     

Hierarchical Pore Development by Plasma Etching of Zr‐Based Metal–Organic Frameworks

The typically stable Zr‐based metal–organic frameworks (MOFs) UiO‐66 and UiO‐66‐NH₂ were treated with tetrafluoromethane (CF₄) and hexafluoroethane (C₂F₆) plasmas. Through interactions between fluoride radicals from the perfluoroalkane plasma and the zirconium–oxygen bonds of the MOF, the resulting materials showed the development of mesoporosity, creating a hierarchical pore structure. It is anticipated that this strategy can be used as a post‐synthetic technique for developing hierarchical networks in a variety of MOFs.     

Nanosized Functional MOFs Loading Ag/AgBr with Throughout‐Visible‐Light Absorption for High‐Efficiency Photocatalysis

Porous metal‐organic frameworks (MOFs) loading metal nanoparticles to form a composite photocatalyst demonstrated unique advantages. Modification of the electron donating group on the aromatic linkers of MOFs could increase the absorption range of light, thereby increasing the photocatalytic activity. In this study, we prepared a composite photocatalyst using a stable NH₂‐functionalized MOF (UiO‐66‐NH₂) to load semiconductor Ag/AgBr nanoparticles, and the resultant composites have intense optical absorption throughout visible light range. The greatly enhanced optical absorption and the unique hetero‐junction between Ag/AgBr and UiO‐66‐NH₂ render efficient separation and utilization of photogenerated electron‐hole pairs. Therefore, Ag/AgBr@UiO‐66‐NH₂ showed much more excellent photocatalytic activity, compared with unmodified UiO‐66 loading Ag/AgBr (Ag/AgBr@UiO‐66) and reported AgX@MOF catalysts. Moreover, the composite photocatalysts showed excellent stability during cycling experiment.     

Cooperative Multifunctional Catalysts for Nitrone Synthesis: Platinum Nanoclusters in Amine‐Functionalized Metal–Organic Frameworks

Nitrones are key intermediates in organic synthesis and the pharmaceutical industry. The heterogeneous synthesis of nitrones with multifunctional catalysts is extremely attractive but rarely explored. Herein, we report ultrasmall platinum nanoclusters (PtNCs) encapsulated in amine‐functionalized Zr metal–organic framework (MOF), UiO‐66‐NH₂ (Pt@UiO‐66‐NH₂) as a multifunctional catalyst in the one‐pot tandem synthesis of nitrones. By virtue of the cooperative interplay among the selective hydrogenation activity provided by the ultrasmall PtNCs and Lewis acidity/basicity/nanoconfinement endowed by UiO‐66‐NH₂, Pt@UiO‐66‐NH₂ exhibits remarkable activity and selectivity, in comparison to Pt/carbon, Pt@UiO‐66, and Pd@UiO‐66‐NH₂. Pt@UiO‐66‐NH₂ also outperforms Pt nanoparticles supported on the external surface of the same MOF (Pt/UiO‐66‐NH₂). To our knowledge, this work demonstrates the first examples of one‐pot synthesis of nitrones using recyclable multifunctional heterogeneous catalysts.     

Water Stable Zr–Benzenedicarboxylate Metal–Organic Frameworks as Photocatalysts for Hydrogen Generation

The Zr‐containing metal–organic frameworks (MOFs) formed by terephthalate (UiO‐66) and 2‐aminoterephthalate ligands [UiO‐66(NH₂)] are two notably water‐resistant MOFs that exhibit photocatalytic activity for hydrogen generation in methanol or water/methanol upon irradiation at wavelength longer than 300 nm. The apparent quantum yield for H₂ generation using monochromatic light at 370 nm in water/methanol 3:1 was of 3.5 % for UiO‐66(NH₂). Laser‐flash photolysis has allowed detecting for UiO‐66 and UiO‐66(NH₂) the photochemical generation of a long lived charge separated state whose decay is not complete 300 μs after the laser flash. Our finding and particularly the influence of the amino group producing a bathochromic shift in the optical spectrum without altering the photochemistry shows promises for the development of more efficient MOFs for water splitting.     

A Computational and Experimental Approach Linking Disorder,High‐Pressure Behavior,and Mechanical Properties in UiO Frameworks

Whilst many metal–organic frameworks possess the chemical stability needed to be used as functional materials, they often lack the physical strength required for industrial applications. Herein, we have investigated the mechanical properties of two UiO‐topology Zr‐MOFs, the planar UiO‐67 ([Zr₆O₄(OH)₄(bpdc)₆], bpdc: 4,4′‐biphenyl dicarboxylate) and UiO‐abdc ([Zr₆O₄(OH)₄(abdc)₆], abdc: 4,4′‐azobenzene dicarboxylate) by single‐crystal nanoindentation, high‐pressure X‐ray diffraction, density functional theory calculations, and first‐principles molecular dynamics. On increasing pressure, both UiO‐67 and UiO‐abdc were found to be incompressible when filled with methanol molecules within a diamond anvil cell. Stabilization in both cases is attributed to dynamical linker disorder. The diazo‐linker of UiO‐abdc possesses local site disorder, which, in conjunction with its longer nature, also decreases the capacity of the framework to compress and stabilizes it against direct compression, compared to UiO‐67, characterized by a large elastic modulus. The use of non‐linear linkers in the synthesis of UiO‐MOFs therefore creates MOFs that have more rigid mechanical properties over a larger pressure range.     

Self‐Assembly of Metal–Organic Frameworks into Monolithic Materials with Highly Controlled Trimodal Pore Structures

We present a two‐step template‐free approach toward monolithic materials with controlled trimodal porous structures with macro‐, meso‐, and micropores. Our method relies on two ordering processes in discrete length scales: 1) Spontaneous formation of macroporous structures in monolithic materials by the sol–gel process through the short‐range ordered self‐assembly of metal–organic frameworks (MOFs), and 2) reorganization of the framework structures in a mediator solution. The Zr‐terephthalate‐based MOF (UiO‐66‐NH₂) was adopted as a proof of concept. The self‐assembly‐induced phase separation process offered interconnected macropores with diameters ranging from 0.9 to 1.8 μm. The subsequent reorganization process converted the microporous structure from low crystalline framework to crystalline UiO‐66. The resultant mesopore size within the skeletons was controlled in the range from 9 to 21 nm. This approach provides a novel way of designing spaces from nano‐ to micrometer scale in network‐forming materials.     

Effective and Selective Catalysts for Cinnamaldehyde Hydrogenation: Hydrophobic Hybrids of Metal–Organic Frameworks,Metal Nanoparticles,and Micro‐ and Mesoporous Polymers

Metal–organic frameworks (MOFs) as selectivity regulators for catalytic reactions have attracted much attention, especially MOFs and metal nanoparticle (NP) shelled structures, e.g., MOFs@NPs@MOFs. Nevertheless, making hydrophilic MOF shells for gathering hydrophobic reactants is challenging. Described here is a new and viable approach employing conjugated micro‐ and mesoporous polymers with iron(III) porphyrin (FeP‐CMPs) as a new shell to fabricate MIL‐101@Pt@FeP‐CMP. It is not only hydrophobic and porous for enriching reactants, but also possesses iron sites to activate C=O bonds, thereby regulating the selectivity for cinnamyl alcohol in the hydrogenation of cinnamaldehyde. Interestingly, MIL‐101@Pt@FeP‐CMP^sponge can achieve a high turnover frequency ( 1516.1 h⁻¹), with 97.3 % selectivity for cinnamyl alcohol at 97.6 % conversion.