Visible‐Light‐Induced Formal [3+2] Cycloaddition for Pyrrole Synthesis under Metal‐Free Conditions

A photocatalytic formal [3+2] cycloaddition of 2H‐azirines with alkynes has been achieved under irradiation by visible light in the presence of organic dye photocatalysts. This transformation provides efficient access to highly functionalized pyrroles in good yields and has been applied to the synthesis of drug analogues. A primary trial of photocascade catalysis merging energy transfer and redox neutral reactions was shown to be successful.     

Silver‐Catalyzed Isocyanide–Isocyanide [3+2] Cross‐Cycloaddition Involving 1,2‐Group Migration: Efficient Synthesis of Trisubstituted lmidazoles

Imidazole ring is an important five‐membered aromatic heterocycle that is widely present in natural products and synthetic molecules. The isocyanide–isocyanide [3+2] cross‐cycloaddition reaction constitutes a straightforward method to access imidazoles starting from the easily available chemicals. So far, only three successive reports are known and all lead to the formation of 1,4‐disubstituted imidazoles. Here, we report the first isocyanide–isocyanide [3+2] cross‐cycloaddition reaction allowing for the formation of 1,4,5‐trisubstituted imidazoles under silver catalysis. An unexpected 1,2‐migration of sulfonyl, alkoxycaybonyl, and carbamoyl groups took place during the cyclization process that is responsible for the formation of trisubstituted imidazoles. This report displayed a mechanistically novel synthetic method toward a variety of imidazole derivatives, which are otherwise difficult to access by conventional methods.     

Enantio‐ and Diastereoselective Synthesis of Chiral Allenes by Palladium‐Catalyzed Asymmetric [3+2] Cycloaddition Reactions

A protocol for the asymmetric synthesis of highly substituted chiral allenes with control of point and axial chirality has been developed. A palladium‐catalyzed [3+2] cycloaddition using readily available racemic allenes gives access to densely functionalized chiral allenes with excellent yields and functional group tolerance. The catalytic asymmetric protocol utilizes a broad range of allenyl TMM (trimethylenemethane) donors to form cyclopentanes, pyrrolidines, and spirocycles with very good control of regio‐, enantio‐, and diastereoselectivity. The chiral allene moiety is shown to be a valuable functional group for rapid elaboration towards complex targets.     

Synthesis of Phosphabenzenes by an Iron‐Catalyzed [2+2+2] Cycloaddition Reaction of Diynes with Phosphaalkynes

A method for the synthesis of phosphabenzenes under iron catalysis is described. Thus, the FeI₂‐catalyzed [2+2+2] cycloaddition of diynes with phosphaalkynes in m‐xylene gave a variety of phosphabenzenes in good to high yields (up to 87 % yield).     

[60]富勒烯[2＋2]环加成反应的研究进展

[2＋2]环加成反应是对C₆₀进行化学修饰的重要反应之一, 重点从[2＋2]环加成的典型反应、主要试剂及反应机理等方面进行了综述.     

Reactivity of allenoates toward aziridines: [3+2] and formal [3+2] cycloadditions

The reactivity of buta-2,3-dienoates toward aziridines is reported. Allenoates react as 2π-component in the [3+2] cycloaddition with the azomethine ylide generated from cis-1-benzyl-2-benzoyl-3-phenylaziridine affording 4-methylenepyrrolidines in a site-, regio-, and stereoselective fashion. Under conventional thermolysis, cis- and trans-2-benzoyl-1-cyclohexyl-3-phenylaziridines showed a different reactivity. These aziridines participate in formal [3+2] cycloadditions with allenes via C-N bond cleavage of the three-membered ring leading to functionalized pyrroles.     

Silver Catalyzed Decarbonylative [3 + 2] Cycloaddition of Cyclobutenediones and Formamides

As an important moiety in natural products, N,O-acetal has attracted wide attention in the past few years. An efficient method to construct N,O-acetal has been developed. Using silver catalyst, cyclobutenediones were smoothly converted to the corresponding γ-aminobutenolides in the presence of formamides, in which cyclobutenediones likely proceed with a key decarbonylative [3 + 2] cycloaddition process. In this way, a series of products with varied substituents were isolated in moderate yield and fully characterized.     

新型他克林-吲哚杂二联体的微波促进Husigen[3+2]环加成反应合成及生物活性

以吲哚-3-丙酸和吲哚-3-丁酸为原料,分别与炔丙胺发生缩合反应得到3-(丙酰丙炔胺)吲哚(4a)和3-(丁酰丙炔胺)吲哚(4b),然后4a和4b分别与9-(叠氮基乙基氨基)-1,2,3,4-四氢吖啶类衍生物5a～5c在微波辐射下发生Husigen[3+2]环加成反应得到12个新型乙酰胆碱酯酶抑制剂——他克林-吲哚杂二联体,其结构经NMR,IR和HRMS表征.初步生物活性测试表明,目标化合物均具有较强的乙酰胆碱酯酶抑制能力,其中化合物2b和2d抑制鱼鳐乙酰胆碱酯酶的IC50值分别为1.6和2.0 nmol.L-1,是6T6BA(IC50=11.0 nmol.L-1,鱼鳐)的6.9和5.5倍.     

Total Synthesis of Proposed Structure of Yuremamine and All Diastereomers Using [3+2]‐Cycloaddition of Platinum‐Containing Azomethine Ylide

Total synthesis of the proposed structure of yuremamine has been achieved for the first time based on the intermolecular [3+2]‐cycloaddition reaction of the platinum‐containing azomethine ylide. All the possible diastereomers of yuremamine were also synthesized via the common intermediate. Through these syntheses, it was confirmed that the proposed structure of yuremamine and the diastereomers differ from the natural product.     

Palladium‐Catalyzed Asymmetric [8+2] Dipolar Cycloadditions of Vinyl Carbamates and Photogenerated Ketenes

Higher‐order cycloadditions, particularly [8+2] cycloadditions, are a straightforward and efficient strategy for constructing significant medium‐sized architectures. Typically, configuration‐restrained conjugated systems are utilized as 8π‐components for higher‐order concerted cycloadditions. However, for this reason, 10‐membered monocyclic skeletons have never been constructed via catalytic asymmetric [8+2] cycloaddition with high peri‐ and stereoselectivity. Here, we accomplished an enantioselective [8+2] dipolar cycloaddition via the merger of visible‐light activation and asymmetric palladium catalysis. This protocol provides a new route to 10‐membered monocyclic architectures bearing chiral quaternary stereocenters with high chemo‐, peri‐, and enantioselectivity. The success of this strategy relied on the facile in situ generation of Pd‐containing 1,8‐dipoles and their enantioselective trapping by ketene dipolarophiles, which were formed in situ via a photo‐Wolff rearrangement.     

Hydrogen‐Bonding Network Promoted [3+2] Cycloaddition: Asymmetric Catalytic Construction of Spiro‐pseudoindoxyl Derivatives

The enantioselective construction of a spirocyclic quaternary stereogenic carbon center at the C2 position of indole has long been an elusive problem in organic synthesis. Herein, by employing a rationally designed hydrogen‐bonding network activation strategy, for the first time, 2,2′‐pyrrolidinyl‐spirooxindole, which is a valuable and prevalent indole alkaloid scaffold, was directly obtained through a catalytic asymmetric [3+2] cycloaddition reaction with high yields and excellent stereoselectivities.     

Stereoselective Synthesis of Tropanes via a 6π‐Electrocyclic Ring‐Opening/ Huisgen [3+2]‐Cycloaddition Cascade of Monocyclopropanated Heterocycles

The synthesis of tropanes via a microwave‐assisted, stereoselective 6π‐electrocyclic ring‐opening/ Huisgen [3+2]‐cycloaddition cascade of cyclopropanated pyrrole and furan derivatives with electron‐deficient dipolarophiles is demonstrated. Starting from furans or pyrroles, 8‐aza‐ and 8‐oxabicyclo[3.2.1]octanes are accessible in two steps in dia‐ and enantioselective pure form, being versatile building blocks for the synthesis of pharmaceutically relevant targets, especially for new cocaine analogues bearing various substituents at the C‐6/C‐7 positions of the tropane ring system. Moreover, the 2‐azabicyclo[2.2.2]octane core (isoquinuclidines), being prominently represented in many natural and pharmaceutical products, is accessible via this approach.     

Metal Free Access to Polysubstituted Pyrimidines via Nitrile Activation and [2+2+2] Cycloaddition

Tf₂O mediated intermolecular / intramolecular [2+2+2] cycloaddition between alkynes and nitriles has been developed for efficient construction of polysubstituted pyrimidines and bicyclopyrimidines. In presence of Tf₂O, aza-allene species were generated in situ through nitrile activation and subsequently participated in the [2+2+2] cycloaddition, which was fully supported by deuteration experiments. The reaction had good substrate extensibility with moderate to excellent yield including trimethylsilylalkynes. The method was utilized as a synthetic tool in the preparation of a luminescent metal complex.     

Diastereo‐ and Enantioselective Palladium‐Catalyzed Dearomative [3+2] Cycloaddition of 3‐Nitroindoles

Diastereo‐ and enantioselective cycloaddition of 3‐nitroindoles with vinyl aziridine was realized under Pd‐catalysis using commercially available Walphos as the ligand, affording pyrroloindolines in high yields with high diastereo‐ and enantioselectivities. The reaction can be scaled up to a gram scale and the reaction products are easily converted to amino pyrroloindoline and other pyrroloindoline derivatives.     

Asymmetric Total Syntheses of Kopsane Alkaloids via a PtCl2‐Catalyzed Intramolecular [3+2] Cycloaddition

A concise and asymmetric total synthesis of five kopsane alkaloids that share a unique heptacyclic caged ring system was accomplished. The key transformation in the sequence involved a remarkable PtCl₂‐catalyzed intramolecular [3+2] cycloaddition, which allowed for the rapid assembly of pentacyclic carbon skeletons bearing 2,3‐quaternary functionalized indoline. Expeditious construction of diverse indoline scaffolds with excellent control of diastereoselectivity demonstrated the broad scope and versatility of this key transformation.     

[8+3]‐Cycloaddition of Tropones with Azaoxyallyl Cations

Although azaoxyallyl cations are widely used as 1,3‐dipoles for various cycloaddition reactions leading to nitrogen‐containing heterocycles, their application in higher‐order cycloaddition reaction remains scarce. Herein, we present the [8+3]‐cycloaddition reaction of tropones with in situ generated azaoxyallyl cations allowing the one‐step construction of cycloheptatriene‐fused 1,4‐oxazinones in moderate to good yields. This base‐promoted new carbon‐oxygen and carbon‐nitrogen bond‐forming reaction takes place under mild conditions in the absence of transition metal catalysts.     

UV‐Induced [2+2] Grafting‐To Reactions for Polymer Modification of Cellulose

Benzaldehyde‐functional cellulose paper sheets have been synthesized via tosylation of cellulose (Whatman No 5) followed by addition of p‐hydroxy benzaldehyde. Via UV‐induced Paterno–Büchi [2+2] cycloaddition reactions, these aldehyde functional surfaces are grafted with triallylcyanurate, trimethylolpropane allyl ether, and vinyl chloroacetate. In the following, allyl‐functional polymers (poly(butyl acrylate), pBA, M_n = 6990 g mol⁻¹, Đ = 1.12 and poly(N‐isopropyl acrylamide), pNIPAAm, M_n = 9500 g mol⁻¹, Đ = 1.16) synthesized via reversible addition fragmentation chain transfer polymerization are conjugated to the celloluse surface in a UV‐induced grafting‐to approach. With pBA, hydrophobic cellulose sheets are obtained (water contact angle 116°), while grafting of pNIPAAm allows for generation of “smart” surfaces, which are hydrophilic at room temperature, but that become hydrophobic when heated above the characteristic lower critical solution temperature (93° contact angle). The Paterno–Büchi reaction has been shown to be a versatile synthetic tool that also performs well in grafting‐to approaches whereby its overall performance seems to be close to that of radical thiol‐ene reactions.