Enhancement of giant magneto-impedance effect in Ni80Fe20/SiO2/Cu composite wires

Ni₈₀Fe₂₀/SiO₂/Cu composite wires of Cu core 60 μm in diameter and coated with layers of SiO₂ and Ni₈₀Fe₂₀ were prepared by RF magnetron sputtering. The influences of the insulator layer thickness, the measurement mode and the magnitude of the driving current on the giant magneto-impedance (GMI) effect were investigated. The results showed that there was an optimum thickness of the insulator layer and the driving current can influence the shape of the MI curve. Resonance enhancement of the GMI was found in the new measurement mode. The results are discussed by taking account of the electromagnetic interactions.     

Magnetic property and magnetoresistance in Fe/ITO multilayers

Giant magnetoresistance was found in DC magnetron sputtering Fe/ITO multilayers. The magnetic properties, electrical properties and magnetoresistance were investigated. A critical temperature is found around 50 K where the temperature dependence of resistivity and magnetoresistance ratio exhibit an abruptly change. The temperature dependence of resistance is found to obey Mott's 1/4 law for low temperature. The max magnetoresistance ratio of 2.0% and 6.7% is found at room temperature and 12.5 K, respectively. The increase of magnetoresistance ratio at low temperature is due to the decrease of spin-mixing effect.     

Electrodeposition and characteristics of Ni80Fe20/Cu composite wires

Electrodeposited Ni₈₀Fe₂₀/Cu composite wire has significant advantages over amorphous wire as sensing element for weak magnetic field sensors, such as orthogonal fluxgate sensors, due to its non-ferromagnetic and conductive core structure. In this study, the key processing parameters are investigated, including electrodeposition current density, duty cycle, electrolyte solution, pH value, applied magnetic field, effect of seeded layers, and post annealing.     

Phase coexistence in annealed CaMn7O12

The structural phase transition in annealed CaMn₇O₁₂ has been investigated by using high resolution synchrotron radiation powder diffraction. There is a phase coexistence phenomenon: two different crystallographic phases coexist in the material between 410 and 458 K. The first one is trigonal and it has a charge ordering (CO) of the Mn³⁺ and Mn⁴⁺ ions, while the second one is cubic and charge delocalized (CD). The volume fraction of the CD phase increases with temperature from 22% at 418 K up to 100% at 468 K. Both phases have domains of at least 150 nm at each temperature. The annealing of CaMn₇O₁₂ relaxed a part of the strains in the lattice, but did not influence the phase coexistence phenomenon.     

Observation of magnetoelectric behavior at room temperature in Pb(FexTi1−x)O3

The co-existence of ferroelectric and ferromagnetic properties at room temperature is very rarely observed. We have been successful in converting ferroelectric PbTiO₃ into a magnetoelectric material by partly substituting Fe at the Ti site. The Pb(Fe_xTi_1−x)O₃ system exhibits ferroelectric and ferromagnetic ordering at room temperature. Even more remarkably, our results demonstrate a coupling between the two order parameters. Hence it could be a futuristic material to provide cost effective and simple path for designing novel electromagnetic devices.     

Magnetic,structural and electrical properties of ordered and disordered Co50Fe50 films

Co₅₀Fe₅₀ films with thickness varying from 100 to 500 Å were deposited on a glass substrate by sputtering process, respectively. Two kinds of CoFe films were studied: one was the as-deposited film, and the other the annealed film. The annealing procedure was to keep the films at 400 °C for 5 h in a vacuum of 5×10⁻⁶ mbar. From the X-ray study, we find that the as-deposited film prefers the CoFe(1 1 0) orientation. Moreover, the body-centered cubic (bcc) CoFe(1 1 0) line is split into two peaks: one corresponding to the ordered body-centered tetragonal (bct) phase, and the other, the disordered bcc phase. After annealing, the peak intensity of the ordered bct phase becomes much stronger, while that of the disordered bcc phase disappears. The annealing has also caused the ordered CoFe(2 0 0) line to appear. When the amount of the ordered bct phase in Co₅₀Fe₅₀ is increased, the saturation magnetization (M_s) and coercivity (H_c) become larger, but the electrical resistivity (ρ) decreases. From the temperature coefficient of resistance (TCR) measurement, we learn that the bct grains in the CoFe film start to grow at temperature 82 °C.     

Residual surface stress measurements in YBa2Cu3Ox superconductors

XRD and residual surface stress (sin² ψ) measurements were carried out on YBa₂Cu₃O_x superconductors with varying oxygen stoichiometry (6.3 < x < 7.0). Slopes of the surface strain versus sin² ψ were plotted against oxygen content for certain reflections. Compressional surface stress has been found along the c-axis, while a tensile surface stress has been observed along the ab-plane. Both surface stresses were found to vary slightly with oxygen content. These findings qualitatively agree with a very small hydrostatic pressure effect on T_c for fully oxygenated YBa₂Cu₃O_x (x = 7) compared to oxygen deficient material at the surface.     

L12 phase formation and giant exchange anisotropy in Mn3Ir/Co–Fe bilayers

The degree of order S of Mn–Ir layers and the exchange anisotropy of Mn–Ir/Co–Fe bilayers were investigated for various chemical compositions of Mn–Ir layers, underlayer materials, and underlayer thicknesses. It was found that: (1) The compositional range over which L1₂-phase Mn₃Ir could be formed is 22–32 at% Ir and giant exchange anisotropy is obtained in this range. (2) Ru is favorable as an underlayer material for avoiding interdiffusion with the Mn–Ir layer during deposition on the temperature elevated substrate. (3) The underlayer thickness could be reduced to 5 nm while maintaining a giant exchange anisotropy in excess of 1 erg/cm².     

Interface morphologies and magnetization characteristics of Co70Fe30 thin films deposited on conjugated polymer thin films

The surface and interface morphology and magnetization characteristics of Co₇₀Fe₃₀ thin films deposited on bare glass and p-Si/SiO₂ substrates and on conjugated polymer poly(3-hexylthiophene-2,5-diyl) (P3HT) thin films on such substrates have been studied by atomic force microscopy and magneto-optic Kerr effect. It was found that the average absolute magnitude of the coercive field of Co₇₀Fe₃₀ correlates with the roughness of the underlayer prior to Co₇₀Fe₃₀ deposition. P3HT deposited on p-Si/SiO₂ substrates possesses an increased surface roughness as compared to the p-Si/SiO₂ surface, but displays a decreased surface roughness as compared to the one of a bare glass substrate.     

Magnetic properties and structure of FePt/FeMn multilayers

A systematic study of the magnetic properties by ion beam sputter-deposition system, was conducted in conjunction with the structure of FePt/FeMn multilayers fabricated onto MgO(0 0 1) substrates. Both parallel and perpendicular exchange biases were observed in the multilayers and were found to decrease drastically, as the deposition temperature is higher than 350 °C, which is evidently due to the interdiffusion at the interface. The thickness dependence study shows that the perpendicular magnetic anisotropy observed in the multilayers originates from surface anisotropy, being consistent with the decrease of perpendicular magnetic anisotropy as the deposition temperature is increased. The difference between parallel and perpendicular blocking temperatures that was clearly observed, is possibly due to the spin canting out of plane at the interface.     

X-ray and neutron powder diffraction study of the monoclinic perovskites Sr2MSbO6 (M=In, Y)

The structures of the perovskites Sr₂InSbO₆ and Sr₂YSbO₆ have been investigated by X-ray and neutron powder diffraction. Both compounds are of monoclinic distortion, space group P2₁/n, with the lattice parameters related to that of the ideal cubic-perovskite (a_p) by a_p, c≈2a_p and β≈90°. The distortions that occur in Sr₂InSbO₆ and Sr₂YSbO₆ can be viewed as due to the octahedral tilts around both the two-fold [110]_p- and the four-fold [001]_p-axis of the cubic aristotype with the oxygen's shifted away from the In/Y(III) ions towards the Sb(V) ions, creating an ordered arrangement of the alternating InO₆/YO₆ and SbO₆ octahedra.     

Structural phase transitions in the layered bismuth oxide BaBi4Ti4O15

The structure of the n=4 Aurivillius oxide BaBi₄Ti₄O₁₅ has been studied at room temperature using powder neutron diffraction, and from 300 to 1000 K using synchrotron X-ray diffraction methods. The structure is orthorhombic (space group A2₁am) at 300 K and transforms to a tetragonal (I4/mmm) structure near 700 K.     

Crystallization-dependent magnetic properties of Mn1.56Co0.96Ni0.48O4 thin films

The effects of magnetic property dependence of the Mn_1.56Co_0.96Ni_0.48O₄ (MCN) films on crystallization are investigated in the growth temperature of 450-750 °C. With the growth temperature increase, both the crystalline quality and the grain size improve. The MCN films exhibit paramagnetic to ferromagnetic transition and the paramagnetic parts fit to the modified Curie-Weiss law. The ferromagnetic couplings of the magnetic ions in the MCN films enhance at elevated growth temperature. The saturation magnetization at 5 K increases with increasing growth temperature, but coercive field decreases monotonously. The magnetic properties of the MCN films strongly depend on their microstructures.     

Magnetic field dependence of asymmetry in the magnetization reversal of ultrathin Co films and Co/Pt multilayers with perpendicular anisotropy

We studied the magnetization reversal in ultrathin [Co/Pt]_n films (n=1, 2, and 4) using magneto-optical Kerr microscopy. These materials demonstrate unusual asymmetries in the activity of nucleation centers and domain wall motion. It was found that application of very high holding magnetic field prior to magnetization reversal, exceeding some critical value much larger than the apparent saturation field, suppresses the subsequent ‘asymmetric’ nucleation centers, activity. We revealed that the ‘asymmetric’ nucleation centers become active again after subsequent reversal cycles coming from a smaller holding field and studied how the asymmetry returns with the decrease of applied holding field. It was found that in low-coercivity ultrathin Co films, the asymmetry in domain wall velocity decreased sharply with the applied field increase and disappeared when the reversal field is greater than μ₀H=1.5 mT.     

Structural evolution of nanocrystalline/amorphous Fe/Ni75B25 multilayers: temperature dependence of electrical resistivity

X-ray specular-reflectivity measurements have been carried out on nanocrystalline/amorphous Fe/Ni₇₅B₂₅ multilayer films which were sputter-deposited on Si substrates, to investigate the evolution of interface roughness and the correlation between structure and transport properties. A significant interface roughness correlation with increasing Fe/NiB layer repetition was observed. The investigated films indicated a temperature dependent high electrical resistivity—10⁴ μΩ-cm at 10 K and 10³ μΩ-cm at 300 K—with a semiconductor-metal transition like behavior. Selected area electron diffraction revealed the presence of crystalline bcc Fe phase and NiB in amorphous state. The structural and transport properties of the multilayers are discussed.     

Magnetic properties of ErxY1−xF3 solid solutions

The Er_xY_1−xF₃ (x=0.1, 0.2, 0.7, 0.9, 1) solid solutions were synthesized and characterized by X-ray powder diffraction and magnetic measurements. The crystal structure refinements done by the Rietveld profile method show that no significant change of the structure parameters with the erbium concentration occurs. On the basis of DC susceptibility measurements in the 2-300 K range the lowest four crystal field levels have been determined, giving the ground level magnetic moment value of 6.7 μ_B. Results of M(H) studies point to the presence of complex exchange interactions between erbium ions.     

Aging of a nanostructured Zn50Se50 alloy produced by mechanical alloying

The aging at room temperature of a nanocrystalline equiatomic ZnSe alloy produced by mechanical alloying was investigated using X-ray diffraction (XRD) and differential scanning calorimetry (DSC) techniques. The measured XRD patterns showed the presence of the peaks corresponding to the crystalline trigonal selenium (c-Se) phase. It is observed that the ZnSe phase is stable with aging. The appearance of the c-Se phase is attributed to the migration of Se atoms located at the interfacial component of the as-milled ZnSe nanostructure with aging.     

Effect of Co layer thickness on the magnetic properties of Tb30Co70/SiNx/Co thin films

The SiN_x (20 nm)/Tb₃₀Co₇₀ (90 nm)/SiN_x (5 nm)/Co (3–37 nm)/SiN_x (10 nm)/Si multilayer films are deposited on naturally oxidized Si wafer by magnetron sputtering. The saturation magnetization (M_s) of the multilayer films is increased with the thickness of high M_s ferromagnetic Co layer. The perpendicular coercivity (_Hc⊥$H_{{\mathrm{c}}^{\perp }}$) value is increased with Co layer thickness as the thickness of the Co layer is lower than 15 nm and then decreases drastically when the thickness of the Co layer further increased. The increase of the _Hc⊥$H_{{\mathrm{c}}^{\perp }}$ value is owing to the interlayer exchange effect [Li Zhang, Physica B 390 (2007) 373] between TbCo and Co layers. Co under-layer with in-plane magnetic anisotropy would pin the magnetic moment of the TbCo layer near by the Co layer and cause the value of _Hc⊥$H_{{\mathrm{c}}^{\perp }}$ to increase. However, as the Co layer is thicker than a critical thickness, the _Hc⊥$H_{{\mathrm{c}}^{\perp }}$ value of the multilayer film would decrease. Therefore, the Co layer with in-plane magnetic anisotropy and soft magnetic properties is expected to dominate the magnetic properties of the multilayer films.     

Positive exchange bias in a Ni80Fe20/NixFe1−xO thin-film bilayer

We have measured positive exchange bias in a Ni₈₀Fe₂₀/Ni_xFe_1−xO thin-film nanocrystallite system. A series of solid solution Ni_xFe_1−xO 40 nm thick films capped with 25 nm thick Ni₈₀Fe₂₀ were deposited using a range of %O₂/Ar bombardment energies (i.e. End-Hall voltages). Proper tuning of the deposition conditions results in a Ni₈₀Fe₂₀/Ni_xFe_1−xO (30%O₂/Ar) based bilayer that exhibits a positive exchange bias loop shift of H_ex∼60 Oe at 150 K.     

Polymeric sheets in Mg4C60

We present preliminary results on the preparation and structure of Mg₄C₆₀, a new fulleride polymer. A series of Mg_xC₆₀ compositions (0<x<6) were prepared by solid state reaction. While most samples were multiphase, a single phase material was obtained at the nominal composition Mg₄C₆₀. The X-ray diffraction pattern of Mg₄C₆₀ was successfully indexed and fitted to a rhombohedral structure based on two-dimensional polymeric sheets of C₆₀ ions. This result extends the family of fulleride polymers to the salts of multiply charged cations and thus opens a new direction in this field.