等浓度的氯化铵和硫酸铵溶液哪个pH高

有中学化学参考资料题:0.10 mol/L的NH4Cl和(NH4)2SO4溶液哪个pH值高?这似乎是个中学生可做的简单题目,仔细考虑不是如此.如果简单地认为盐酸和硫酸都是强酸,而硫酸是二元酸,硫酸铵溶液中铵盐浓度为0.20 mol/L,那么NH4Cl溶液pH高,那是不妥的.硫酸是二元酸,第一个氢离子能完全电离,第二个氢离子部分电离,如此考虑情况怎么样呢?是不是答案发生变化?这要通过计算来说明.     

Enhanced efficiency and stability in Sn-based perovskite solar cells with secondary crystallization growth

The conversion efficiencies reported for Tin(Sn)halide-based perovskite solar cells(PSCs)fall a large gap behind those of lead halide-based PSCs,mainly because of poor film quality of the former.Here we report an efficient strategy based on a simple secondary crystallization growth(SCG)technique to improve film quality for tin halide-based PSCs by applying a series of functional amine chlorides on the perovskite surface.They were discovered to enhance the film crystallinity and suppress the oxidation of Sn²⁺remarkably,hence reduce trap state density and non-irradiative recombination in the absorber films.Furthermore,the SCG film holds the band levels matching better with carrier transport layers and herein favoring charge extraction at the device interfaces.Consequently,a champion device efficiency of 8.07% was achieved alo ng with significant enhancements in VOC and JSC,in contrast to 5.35% of the control device value.Moreover,the SCG film-based devices also exhibit superior stability comparing with the control one.This work explicitly paves a novel and general strategy for developing high performance lead-free PSCs.     

Energy level engineering of charge selective contact and halide perovskite by modulating band offset:Mechanistic insights

Mixed cation and anion based perovskites solar cells exhibited enhanced stability under outdoor conditions,however,it yielded limited power conversion efficiency when TiO₂ and Spiro-OMeTAD were employed as electron and hole transport layer(ETL/HTL)respectively.The inevitable interfacial recombination of charge carriers at ETL/perovskite and perovskite/HTL interface diminished the efficiency in planar(n-i-p)perovskite solar cells.By employing computational approach for uni-dimensional device simulator,the effect of band offset on charge recombination at both interfaces was investigated.We noted that it acquired cliff structure when the conduction band minimum of the ETL was lower than that of the perovskite,and thus maximized interfacial recombination.However,if the conduction band minimum of ETL is higher than perovskite,a spike structure is formed,which improve the performance of solar cell.An optimum value of conduction band offset allows to reach performance of 25.21%,with an open circuit voltage(VOC)of 1231 mV,a current density JSC of 24.57 mA/cm² and a fill factor of 83.28%.Additionally,we found that beyond the optimum offset value,large spike structure could decrease the performance.With an optimized energy level of Spiro-OMeTAD and the thickness of mixed-perovskite layer performance of 26.56% can be attained.Our results demonstrate a detailed understanding about the energy level tuning between the charge selective layers and perovskite and how the improvement in PV performance can be achieved by adjusting the energy level offset.     

Recent Advances of Pure Organic Room Temperature Phosphorescence Materials for Bioimaging Applications

Bioimaging,as a powerful and helpful tool,which allows people to investigate deeply within living organisms,has contributed a lot for both clinical theranostics and scientific research.Pure organic room temperature phosphorescence(RTP)materials with the unique features of ultralong luminescence lifetime and large Stokes shift,can efficiently avoid biological autofluorescence and scattered light through a time-resolved imaging modality,and thus are attracting increasing attention.This review classifies pure organic RTP materials into three categories,including small molecule RTP materials,polymer RTP materials and supramolecular RTP materials,and summarizes the recent advances of pure organic RTP materials for bioimaging applications.     

A new strategy to access Co/N co-doped carbon nanotubes as oxygen reduction reaction catalysts

Carbon nanotubes(CNTs),as one-dimensional nanomaterials,show great potential in energy conversion and storage due to their efficient electrical conductivity and mass transfer.However,the security risks,time-consuming and high cost of the preparation process hinder its further application.Here,we develop that a negative pressure rather than a following gas environment can promote the generation of cobalt and nitrogen co-doped CNTs(Co/N-CNTs) by using cobalt zeolitic imidazolate framework(ZIF-67) as a precursor,in which the negative pressure plays a key role in adjusting the size of cobalt nanoparticles and stimulating the rearragement of carbon atoms for forming CNTs.Importantly,the obtained Co/N-CNTs,with high content of pyridinic nitrogen and abundant graphitized structure,exhibit superior catalytic activity for oxygen reduction reaction(ORR) with half-wave potential(E_1/2) of 0.85 V and durability in terms of the minimum current loss(2%) after the 30,000 s test.Our development provides a new pathway for large-scale and cost-effective preparation of metal-doped CNTs for various applications.     

Stabilizing High-voltage Cathode Materials for Next-generation Li-ion Batteries

The pressing demand for high-energy/power lithium-ion batteries requires the deployment of cathode materials with higher capacity and output voltage.Despite more than ten years of research,high-voltage cathode mate-rials,such as high-voltage layered oxides,spinel LiNi0.5Mn1.5O4,and high-voltage polyanionic compounds still cannot be commercially viable due to the instabilities of standard electrolytes,cathode materials,and cathode electrolyte interphases under high-voltage operation.This paper summarizes the recent advances in addressing the surface and interface issues haunting the application of high-voltage cathode materials.The understanding of the limitations and advantages of different modification protocols will direct the future endeavours on advancing high-energy/power lithium-ion batteries.     

Suppressing trap states and energy loss by optimizing vertical phase distribution through ternary strategy in organic solar cells

Suppressing the trap-state density and the energy loss via ternary strategy was demonstrated.Favorable vertical phase distribution with donors(acceptors)accumulated(depleted)at the interface of active layer and charge extraction layer can be obtained by introducing appropriate amount of polymer acceptor N2200 into the systems of PBDB-T:IT-M and PBDB-TF:Y6.In addition,N2200 is gradiently distributed in the vertical direction in the ternary blend film.Various measurements were carried out to study the effects of N2200 on the binary systems.It was found that the optimized morphology especially in vertical direction can significantly decrease the trap state density of the binary blend films,which is beneficial for the charge transport and collection.All these features enable an obvious decrease in charge recombination in both PBDB-T:IT-M and PBDB-TF:Y6 based organic solar cells(OSCs),and power conversion efficiencies(PCEs)of 12.5%and 16.42%were obtained for the ternary OSCs,respectively.This work indicates that it is an effective method to suppress the trap state density and thus improve the device performance through ternary strategy.     

Conformational Properties of Comb-shaped Polyelectrolytes with Negatively Charged Backbone and Neutral Side Chains Studied by a Generic Coarse-grained Bead-and-Spring Model

A generic coarse-grained bead-and-spring model,mapped onto comb-shaped polycarboxylate-based(PCE)superplasticizers,is developed and studied by Langevin molecular dynamics simulations with implicit solvent and explicit counterions.The agreement on the radius of gyration of the PCEs with experiments shows that our model can be useful in studying the equilibrium sizes of PCEs in solution.The effects of ionic strength,side-chain number,and side-chain length on the conformational behavior of PCEs in solution are explored.Single-chain equilibrium properties,including the radius of gyration,end-to-end distance and persistenee length of the polymer backbone,shape-asphericity parameter,and the mean span dimension,are determined.It is found that with the increase of ionic strength,the equilibrium sizes of the polymers decrease only slightly,and a linear dependenew of the persistence length of backbone on the Debye screening length is found,in good agreement with the theory developed by Dobrynin.Increasing side-chain numbers and/or side-chain lengths increases not only the equilibrium sizes(radius of gyration and mean span)of the polymer as a whole,but also the persistence length of the backbone due to excluded volume interactions.     

Three-dimensionalization via control of laser-structuring parameters for high energy and high power lithium-ion battery under various operating conditions

Laser-structuring is an effective method to promote ion diffusion and improve the performance of lithium-ion battery(LIB)electrodes.In this work,the effects of laser structuring parameters(groove pitch and depth)on the fundamental characteristics of LIB electrode,such as interfacial area,internal resistances,material loss and electrochemical performance,are investigated,LiNi_0.5Co_0.2Mn_0.3O₂ cathodes were structured by a femtosecond laser by varying groove depth and pitch,which resulted in a material loss of 5%-14%and an increase of 140%-260%in the in terfacial area between electrode surface and electrolyte.It is shown that the importance of groove depth and pitch on the electrochemical performance(specific capacity and areal discharge capacity)of laser-structured electrode varies with current rates.Groove pitch is more im porta nt at low current rate but groove depth is at high curre nt rate.From the mapping of lithium concentration within the electrodes of varying groove depth and pitch by laser-induced breakdown spectroscopy,it is verified that the groove functions as a diffusion path for lithium ions.The ionic,electronic,and charge transfer resistances measured with symmetric and half cells showed that these internal resistances are differently affected by laser structuring parameters and the changes in porosity,ionic diffusion and electronic pathways.It is demonstrated that the laser structuring parameters for maximum electrode performance and minimum capacity loss should be determined in consideration of the main operating conditions of LIBs.     

Mesh-like vertical structures enable both high areal capacity and excellent rate capability

In order to balance electrochemical kinetics with loading level for achieving efficient energy storage with high areal capacity and good rate capability simultaneously for wearable electronics,herein,2 D meshlike vertical structures(NiCo_2 S_4@Ni(OH)_2) with a high mass loading of 2.17 mg cm^-2 and combined merits of both 1 D nanowires and 2 D nanosheets are designed for fabricating flexible hybrid supercapacitors.Particularly,the seamlessly interconnected NiCo_2 S_4 core not only provides high capacity of 287.5 μAh cm^-2 but also functions as conductive skeleton for fast electron transport;Ni(OH)_2 sheath occupying the voids in NiCo_2 S_4 meshes contributes extra capacity of 248.4 μAh cm^-2;the holey features guarantee rapid ion diffusion along and across NiCO_2 S_4@Ni(OH)_2 meshes.The resultant flexible electrode exhibits a high areal capacity of 535.9 μAh cm^-2(246.9 mAh g^-1) at 3 mA cm^-2 and outstanding rate performance with 84.7% retention at 30 mA cm^-2,suggesting efficient utilization of both NiCo_2 S_4 and Ni(OH)_2 with specific capacities approaching to their theoretical values.The flexible solid-state hybrid device based on NiCo_2 S_4@Ni(OH)_2 cathode and Fe_2 O_3 anode delivers a high energy density of 315 μWh cm^-2 at the power density of 2.14 mW cm^-2 with excellent electrochemical cycling stability.     

基于MOOC的“无机化学Ⅱ”课程在线教学的探索与实践

During the battle against COVID-19 epidemic, the inorganic chemistry teaching team of Jilin University carried out online teaching of student-centered "inorganic chemistry Ⅱ" course based on "inorganic element chemistry" MOOC with Chaoxing learning platform and QQ group as the auxiliaries. Through the big data support and interactive communication section of Chaoxing learning platform, the learning situation of students in the three learning links of "pre-class, in-class, after-class" was timely tracked and analyzed. Practice showed that online teaching could accomplish teaching and learning effectively.     

分析化学线上教学的实践与思考*

以分析化学课程为例,基于OBE(outcome-based education)教育理念,经广泛调研和精心设计,开展了基于“超星+学习通”平台的完全线上教学。从课程内容设计、课程题库建设、学习模式选择、课后讨论引导、学习效果检测等方面介绍了该教学模式的实施情况。学生的练习成绩和满意度调查反馈显示教学效果良好,有效实现了预期教学目标。     

基于超星泛雅平台的在线课程建设

受新型冠状病毒感染肺炎疫情的影响,高校延期开学,在教育部"停课不停学,停课不停教"的号召下,普通高校教师如何利用网络平台顺利开展在线教学并保证教学质量和学习效果成为一大挑战。本文以超星泛雅平台为例,介绍了生物类专业有机化学在线开放课程的建设方案。     

构建多维教学平台开展以学生为中心的绿色化学线上教学

During the outbreak of COVID-19 epidemic, considering the characteristics of being an English course, the "Green Chemistry" teaching team of Sichuan University has built a multi-dimensional teaching platform based on Chaoxing Fanya platform, QQ group, QQ group class, So Jump platform, station B and WeChat official accounts, to optimize the whole teaching process from the three links of preparation before class, on-line teaching, feedback after class. Student-centered teaching was carried out by the form of flipped learning based on task-driven cooperative learning. It is found that the students have been encouraged by task-driven cooperative learning, and their English ability, professional quality, as well as high-order thinking skills such as analysis, evaluation and problem solving are improved.     

基于微课的翻转课堂教学模式在分析化学实验教学中的探索

分析化学实验是大学化学实验的重要内容,是分析化学课程学习中不可缺少的组成部分。为了提高分析化学实验教学质量,提升学生动手能力、分析问题和解决问题的能力以及创新能力,解决传统教学模式存在的主要问题,对分析化学实验教学模式进行了改革探索。将以微课为基础的翻转课堂教学模式引入到分析化学实验中,激发学生的实验热情,提高学生综合实验技能,巩固基础理论知识,培养了科学研究思维,真正实现创新性人才培养目标。     

利用有机波谱教学网站iSpec进行游戏化课堂教学的实践*

针对学生在有机化学波谱学学习过程中枯燥、难以形象化的具体情况,介绍一个利用有机波谱在线学习的网站进行游戏化课堂教学的学习活动,以期提升学生在该课程学习中的积极性及学习效果。该教学活动的实施分为课堂和课后进行,主要依托iSpec网站游戏竞赛的答题模式,结合教师课堂教学及学生自主学习,进行相关知识技能的教授,最终提升学生的学习效率与效果。     

无机化学元素教学中运用混合教学模式的探索

针对无机化学教学中,元素部分内容庞杂细碎、描述性内容多的特点,采用混合式教学模式,结合传统的面授教学和数字化网络教学的优势,使丰富的教学资源多样化呈现、重要知识点多方位训练。同时,对原有的教学内容、教学方法和考核评价等方面进行了全面改进,建立起以学生为中心、以教师引导为辅的主动学习模式。初步实践表明,博采众长的混合式教学模式受到学生的普遍欢迎,对强化个性化教学、提高教学效果、培养创新能力有积极的意义。     

全媒体时代仪器分析实验课程的教学改革研究

随着现代信息技术的迅猛发展,声音、图像、视频等多种媒体在课程教学中广为应用,学生在任何时间、任何地点利用信息终端完成线上自主学习成为常态,课程教学的信息全媒体时代随之而来,全媒体对实验教学带来全新要求。本文在总结近年来仪器分析实验全媒体教学经验的基础上,开展全媒体时代背景下仪器分析实验的实践教学设计、资源库建设、新型教学模式构建、课堂教学考评、教学团队建设的研究,以期提高学生自主综合学习能力和高阶思维能力,提升仪器分析实验课程的教学效果,为深入开展全媒体教学改革提供参考。     

普通化学实验“学生中心”教学模式改革与探索

This paper introduces the implement program and significance of the teaching reform of student-centered teaching mode, on the basis of classroom practice in general chemistry laboratory. A complete comparisons between the student-centered teaching mode and teacher-centered teaching mode were carried out in many aspects, such as teaching process, teaching evaluation, teaching implementation effect, etc. The main status of students should be built and all efforts are made focusing the students in student-centered teaching mode. Students can absorb knowledge, improve ability, and cultivate healthy personality by online and offline teaching models, heuristic teaching methods and cooperative learning strategies, which were implemented with the Superstar learning platform. The student-centered teaching mode helps to build a harmonious relationship between teachers and students, cultivate students' scientific literacy and humanistic quality, and promote the all-round development of students.     

项目式翻转学习在表界面现象教学中的尝试

According to the current status of physical chemistry teaching and problems in teaching activities, a comprehensive analysis was carried out, and a teaching mode of project-driven flipped learning was proposed. The project curriculum was optimized and designed to effectively carry out innovative teaching activities. Combined with the teaching content in the chapter of surface interface phenomenon, the specific implementation strategy of this new teaching mode is explained with specific teaching cases. This model helps to cultivate the independence of students thinking and learning autonomy, stimulates students' enthusiasm for learning, and significantly improves the quality and effect of classroom teaching.