A two-machine flowshop scheduling problem with a separated maintenance constraint

This paper considers a two-machine flowshop scheduling problem with a separated maintenance constraint. This means that the machine may not always be available during the scheduling period. It needs a constant time to maintain the machine after completing a fixed number of jobs at most. The objective is to find the optimal job combinations and the optimal job schedule such that the makespan is minimized. The proposed problem has some practical applications, for example, in electroplating process, the electrolytic cell needs to be cleaned and made up a deficiency of medicine. In this paper, we propose a heuristic algorithm to solve this problem. Some polynomially solvable cases and computational experiments are also provided.     

Tabu search heuristic for two-machine flowshop with batch processing machines

Batch processing machines are frequently encountered in many industrial environments. A batch processing machine is one which can process several jobs simultaneously as a batch. The processing time of a batch is equal to the largest processing time of any job in the batch. This study deals with the problem of scheduling jobs in a flowshop with two batch processing machines such that the makespan is minimized. A heuristic based on Tabu search (TS) technique is proposed. The proposed heuristic is compared with a heuristic based on mixed integer linear programming (MILP). Because the complexity of the MILP-based heuristic is depended on the number of job batches, the comparison is under up-to-eight batches problem. In order to measure the proposed TS-based heuristic in larger batch problem, the relative error percentage with the lower bound (REP_LB) is used. The results show that the proposed heuristic is efficient and effective for the problems with relative large job sizes.     

Common due date assignment and scheduling with ready times

We consider the problem of scheduling a set of nonsimultaneously available jobs on one machine. Each job has a ready time only at or after which the job can be processed. All the jobs have a common due date, which needs to be determined. The problem is to determine a due date and a schedule so as to minimize a total penalty depending on the earliness, tardiness and due date. We show that this problem is strongly NP-hard and give an efficient algorithm that finds an optimal due date and schedule when either the job sequence is predetermined or all jobs have the same processing time. We also propose three approximation algorithms for the general and special cases together with their experimental analysis.

Scope and purpose

We consider the single machine due date assignment problem for scheduling jobs which are ready for processing at different times. The problem under consideration arises in production planning and scheduling concerning the setting of appropriate due dates for a number of customer orders arriving over time. Most of the earlier publications on this subject assumed that the jobs are ready for processing simultaneously. This assumption is too restrictive for real-life production systems where jobs arrive at different times. We show that the problem with unequal ready times is NP-hard and develop fast heuristic algorithms for it, and exact algorithms for two special cases.     

A heuristic approach for single-machine scheduling with due dates and class setups

The single-machine sequence-independent class setup scheduling problem is examined in this paper. It is assumed that jobs are classified into classes and a setup is required between jobs of different classes, but not of the same class. Furthermore, this setup time is fixed and depends only on the current job. Since the problem is NP-hard, a heuristic algorithm is proposed to find an approximate schedule that minimizes the maximum lateness on a set of jobs. The algorithm can easily be modified to solve the maximum tardiness problems as well. The accuracy of the heuristic algorithm in generating near optimal solutions is empirically evaluated.Scope and purposeFor batch manufacturing, it maybe desirable to produce many items of the same type, or class, at the same run in order to save the setup cost. However, committing facilities to long production runs for one product may inevitably make others tardy. Small batch size may conform urgent jobs to their delivery date, but one of the consequences would be the loss of productive efficiency due to numerous setups. Therefore, scheduling is basically a trade-off between the inherently conflicting efficiency measure and due-date compliance. This paper considers a single-machine scheduling problem in which jobs are classified into classes and a setup is required between jobs of different classes. The setup time is fixed and depends only on the current job. This problem is called a sequence-independent class setup problem and is NP-complete.     

Machine scheduling with job class setup and delivery considerations

We study machine scheduling problems in which the jobs belong to different job classes and they need to be delivered to customers after processing. A setup time is required for a job if it is the first job to be processed on a machine or its processing on a machine follows a job that belongs to another class. Processed jobs are delivered in batches to their respective customers. The batch size is limited by the capacity of the delivery vehicles and each shipment incurs a transport cost and takes a fixed amount of time. The objective is to minimize the weighted sum of the last arrival time of jobs to customers and the delivery (transportation) cost. For the problem of processing jobs on a single machine and delivering them to multiple customers, we develop a dynamic programming algorithm to solve the problem optimally. For the problem of processing jobs on parallel machines and delivering them to a single customer, we propose a heuristic and analyze its performance bound.     

Job scheduling methods for reducing waiting time variance

Minimizing Waiting Time Variance (WTV) is a job scheduling problem where we schedule a batch of n$n$ jobs, for servicing on a single resource, in such a way that the variance of their waiting times is minimized. Minimizing WTV is a well known scheduling problem, important in providing Quality of Service (QoS) in many industries. Minimizing the variance of job waiting times on computer networks can lead to stable and predictable network performance. Since the WTV minimization problem is NP-hard, we develop two heuristic job scheduling methods, called Balanced Spiral and Verified Spiral, which incorporate certain proven properties of optimal job sequences for this problem. We test and compare our methods with four other job scheduling methods on both small and large size problem instances. Performance results show that Verified Spiral gives the best performance for the scheduling methods and problems tested in this study. Balanced Spiral produces comparable results, but at less computational cost. During our investigation we discovered a consistent pattern in the plot of WTV over mean of all possible sequences for a set of jobs, which can be used to evaluate the sacrifice of mean waiting time while pursuing WTV minimization.     

Minimizing total weighted flowtime subject to minimum makespan on two identical parallel machines

We study the problem of scheduling n jobs on two identical parallel processors or machines where an optimal schedule is defined as one with the shortest total weighted flowtime (i.e., the sum of the weighted completion time of all jobs), among the set of schedules with minimum makespan (i.e., the completion time of the last job finished). We present a two phase non-linear Integer Programming formulation for its solution, admittedly not to be practical or useful in most cases, but theoretically interesting since it models the problem. Thus, as an alternative, we propose an optimization algorithm, for small problems, and a heuristic, for large problems, to find optimal or near optimal solutions. Furthermore, we perform a computational study to evaluate and compare the effectiveness of the two proposed methods.     

A heuristic for job shop scheduling to minimize total weighted tardiness

This paper considers the job shop scheduling problem to minimize the total weighted tardiness with job-specific due dates and delay penalties, and a heuristic algorithm based on the tree search procedure is developed for solving the problem. A certain job shop scheduling to minimize the maximum tardiness subject to fixed sub-schedules is solved at each node of the search tree, and the successor nodes are generated, where the sub-schedules of the operations are fixed. Thus, a schedule is obtained at each node, and the sub-optimum solution is determined among the obtained schedules. Computational results on some 10 jobs and 10 machines problems and 15 jobs and 15 machines problems show that the proposed algorithm can find the sub-optimum solutions with a little computation time.     

Minimizing makespan subject to minimum flowtime on two identical parallel machines

We consider the problem of scheduling jobs on two parallel identical machines where an optimal schedule is defined as one that gives the smallest makespan (the completion time of the last job) among the set of schedules with optimal total flowtime (the sum of the completion times of all jobs). We propose an algorithm to determine optimal schedules for the problem, and describe a modified multifit algorithm to find an approximate solution to the problem in polynomial computational time. Results of a computational study to compare the performance of the proposed algorithms with a known heuristic shows that the proposed heuristic and optimization algorithms are quite effective and efficient in solving the problem.Scope and purposeMultiple objective optimization problems are quite common in practice. However, while solving scheduling problems, optimization algorithms often consider only a single objective function. Consideration of multiple objectives makes even the simplest multi-machine scheduling problems NP-hard. Therefore, enumerative optimization techniques and heuristic solution procedures are required to solve multi-objective scheduling problems. This paper illustrates the development of an optimization algorithm and polynomially bounded heuristic solution procedures for the scheduling jobs on two identical parallel machines to hierarchically minimize the makespan subject to the optimality of the total flowtime.     

Single machine scheduling with interfering job sets

We consider two single machine bicriteria scheduling problems in which jobs belong to either of two different disjoint sets, each set having its own performance measure. The problem has been referred to as interfering job sets in the scheduling literature and also been called multi-agent scheduling where each agent's objective function is to be minimized. In the first problem (P1) we look at minimizing total completion time and number of tardy jobs for the two sets of jobs and present a forward SPT-EDD heuristic that attempts to generate the set of non-dominated solutions. The complexity of this specific problem is NP-hard; however some pseudo-polynomial algorithms have been suggested by earlier researchers and they have been used to compare the results from the proposed heuristic. In the second problem (P2) we look at minimizing total weighted completion time and maximum lateness. This is an established NP-hard problem for which we propose a forward WSPT-EDD heuristic that attempts to generate the set of supported points and compare our solution quality with MIP formulations. For both of these problems, we assume that all jobs are available at time zero and the jobs are not allowed to be preempted.     

Multiagent scheduling method with earliness and tardiness objectives in flexible job shops.

Flexible job-shop scheduling problems are an important extension of the classical job-shop scheduling problems and present additional complexity. Such problems are mainly due to the existence of a considerable amount of overlapping capacities with modern machines. Classical scheduling methods are generally incapable of addressing such capacity overlapping. We propose a multiagent scheduling method with job earliness and tardiness objectives in a flexible job-shop environment. The earliness and tardiness objectives are consistent with the just-in-time production philosophy which has attracted significant attention in both industry and academic community. A new job-routing and sequencing mechanism is proposed. In this mechanism, two kinds of jobs are defined to distinguish jobs with one operation left from jobs with more than one operation left. Different criteria are proposed to route these two kinds of jobs. Job sequencing enables to hold a job that may be completed too early. Two heuristic algorithms for job sequencing are developed to deal with these two kinds of jobs. The computational experiments show that the proposed multiagent scheduling method significantly outperforms the existing scheduling methods in the literature. In addition, the proposed method is quite fast. In fact, the simulation time to find a complete schedule with over 2000 jobs on ten machines is less than 1.5 min.     

Minimizing Makespan and Preemption Costs on a System of Uniform Machines

It is well known that for preemptive scheduling on uniform machines there exist polynomial time exact algorithms, whereas for non-preemptive scheduling there are probably no such algorithms. However, it is not clear how many preemptions (in total, or per job) suffice in order to guarantee an optimal polynomial time algorithm. In this paper we investigate exactly this hardness gap, formalized as two variants of the classic preemptive scheduling problem. In generalized multiprocessor scheduling (GMS) we have a job-wise or total bound on the number of preemptions throughout a feasible schedule. We need to find a schedule that satisfies the preemption constraints, such that the maximum job completion time is minimized. In minimum preemptions scheduling (MPS) the only feasible schedules are preemptive schedules with the smallest possible makespan. The goal is to find a feasible schedule that minimizes the overall number of preemptions. Both problems are NP-hard, even for two machines and zero preemptions. For GMS, we develop polynomial time approximation schemes, distinguishing between the cases where the number of machines is fixed, or given as part of the input. Our scheme for a fixed number of machines has linear running time, and can be applied also for instances where jobs have release dates, and for instances with arbitrary preemption costs. For MPS, we derive matching lower and upper bounds on the number of preemptions required by any optimal schedule. Our results for MPS hold for any instance in which a job, J_j, can be processed simultaneously by ρ_j machines, for some ρ_j ≥ 1.     

The two-stage assembly scheduling problem to minimize total completion time with setup times

We address the two-stage assembly scheduling problem where there are m machines at the first stage and an assembly machine at the second stage. The objective is to schedule the available n jobs so that total completion time of all n jobs is minimized. Setup times are treated as separate from processing times. This problem is NP-hard, and therefore we present a dominance relation and propose three heuristics. The heuristics are evaluated based on randomly generated data. One of the proposed heuristics is known to be the best heuristic for the case of zero setup times while another heuristic is known to perform well for such problems. A new version of the latter heuristic, which utilizes the dominance relation, is proposed and shown to perform much better than the other two heuristics.     

恒速处理机的多机Flow shop最小和调度问题的启发式算法分析

本文研究有n个作业需在5个处理机中心进行加工，处理机中心i由l1个恒速机组成的非抢占式多机flow shop调度最小和问题．每个作业有s个工序，每个工序需在对应的处理机中心的任一台机器上加工处理，作业到达前不能加工，所有作业通过处理机中心的路径相同．目标是确定一个作业在每个处理机中心机器上的可行调度序列，使所有作业在最后处理机中心的加权完成时间总和最小化．在作业处理时间需求、作业权重分别为独立同分布的有界随机变量时，通过特殊flow shop调度松弛方法，我们证明该问题在作业数趋于无穷时，一个基于有效作业最短加权平均处理时间需求的启发式算法是渐近最优的．     

Single processor scheduling with job values depending on their completion times

The paper deals with a single processor scheduling problem in which the sum of values of all jobs is maximized. The value of a job is characterized by a stepwise nonincreasing function with one or more moments at which the changes of job value occur. Establishing an order of processing of datagrams which are sent by router is a practical example of application of such problems. We prove that the special case of our problem, with a single moment of change of job values, is equivalent to the well-known, NP-hard in the ordinary sense, problem of minimizing weighted number of late jobs. Next, we show that, based on this equivalence, the existing algorithms for solving the latter problem can be adopted to solve special cases of our problem. Additionally, we construct a pseudopolynomial time algorithm based on the dynamic programming method, for the case with arbitrary number of common moments of job value changes. At the end of the paper, we generalize this algorithm to the corresponding case with parallel processors. Thus, we show that these two problems are also NP-hard in the ordinary sense. Moreover, we construct exact polynomial time algorithms for two further special cases of our problem. Finally, in order to solve the general version of the problem, we construct and experimentally test a number of heuristic algorithms.     

A two-machine flowshop makespan scheduling problem with deteriorating jobs

In traditional scheduling problems, the job processing times are assumed to be known and fixed from the first job to be processed to the last job to be completed. However, in many realistic situations, a job will consume more time than it would have consumed if it had begun earlier. This phenomenon is known as deteriorating jobs. In the science literature, the deteriorating job scheduling problems are relatively unexplored in the flowshop settings. In this paper, we study a two-machine flowshop makespan scheduling problem in which job processing times vary as time passes, i.e. they are assumed as increasing functions of their starting times. First, an exact algorithm is established to solve most of the problems of up to 32 jobs in a reasonable amount of time. Then, three heuristic algorithms are provided to derive the near-optimal solutions. A simulation study is conducted to evaluate the performances of the proposed algorithms. In addition, the impact of the deterioration rate is also investigated.     

Minimizing the makespan on a batch machine with non-identical job sizes: an exact procedure

A batch processing machine can simultaneously process several jobs forming a batch. This paper considers the problem of scheduling jobs with non-identical capacity requirements, on a single-batch processing machine of a given capacity, to minimize the makespan. The processing time of a batch is equal to the largest processing time of any job in the batch. We present some dominance properties for a general enumeration scheme and for the makespan criterion, and provide a branch and bound method. For large-scale problems, we use this enumeration scheme as a heuristic method.Scope and purposeUsually in classical scheduling problems, a machine can perform only one job at a time. Although, one can find machines that can process several jobs simultaneously as a batch. All jobs of a same batch have common starting and ending times. Batch processing machines are encountered in many different environments, such as burn-in operations in semiconductor industries or heat treatment operations in metalworking industries. In the first case, the capacity of the machine is defined by the number of jobs it can hold. In the second case, each job has a certain capacity requirement and the total size of a batch cannot exceed the capacity of the machine. Hence, the number of jobs contained in each batch may be different. In this paper, we consider this second case (which is more difficult) and we provide an exact method for the makespan criterion (minimizing the last ending time).     

Minimizing job completion time variance for service stability on identical parallel machines

This paper addresses a job scheduling problem on multiple identical parallel machines so as to minimize job completion time variance (CTV). CTV minimization is closely related to the Just-In-Time philosophy and the service stability concept since it penalizes both earliness and tardiness. Its applications can be found in many real-life areas such as Internet data packet dispatching and production planning. This paper focuses on the unrestricted case of the problem where idle times are allowed to exist before machines start to process jobs. We prove several dominant properties about the optimal solution to the problem. For instance, we prove that the mean completion time (MCT) on each machine should be the same under an optimal schedule. Based on these properties, an efficient heuristic algorithm is proposed. Computational experiments are conducted to test the performance of the proposed algorithm. The outputs demonstrate that the proposed algorithm is near optimal for small problem instances and greatly outperforms some existing algorithms for large problem instances.     

Time-constrained project scheduling

We propose a new approach for scheduling with strict deadlines and apply this approach to the Time-Constrained Project Scheduling Problem (TCPSP). To be able to meet these deadlines, it is possible to work in overtime or hire additional capacity in regular time or overtime. For this problem, we develop a two stage heuristic. The key of the approach lies in the first stage in which we construct partial schedules. In these partial schedules, jobs may be scheduled for a shorter duration than required. The second stage uses an ILP formulation of the problem to turn a partial schedule into a feasible schedule, and to perform a neighborhood search. The developed heuristic is quite flexible and, therefore, suitable for practice. We present experimental results on modified RCPSP benchmark instances. The two stage heuristic solves many instances to optimality, and if we substantially decrease the deadline, the rise in cost is only small.