Future energy consumption and greenhouse gas emissions in Jordanian industries

Most, i.e. 85%, of greenhouse gas (GHG) emissions in Jordan emanate as a result of fossil fuel combustion. The industrial sector consumed 23.3% of the total national fuel consumption for heat and electric-power generation in 1999. The CO₂ emissions from energy use in manufacturing processes represent 12.1% of the total national CO₂ emissions. Carbon dioxide is also released as a result of the calcining of carbonates during the manufacture of cement and iron. Electricity, which is the most expensive form of energy, in 1999 represented 45% of total fuel used for heat and power nationally. Heavy fuel oil and diesel oil represented 46% and 7%, respectively, of all energy used by industry. Scenarios for future energy-demands and the emissions of gaseous pollutants, including GHGs, have been predicted for the industrial sector. For these, the development of a baseline scenario relied on historical data concerning consumption, major industries’ outputs, as well as upon pertinent published governmental policies and plans. Possible mitigation options that could lead to a reduction in GHG emissions are assessed, with the aim of achieving a 10% reduction by 2010, compared with the baseline scenario. Many viable CO₂ emission mitigation measures have been identified for the industrial sector, and some of these can be considered as attractive opportunities due to the low financial investments required and short pay back periods. These mitigation options have been selected on the basis of low GHG emission rates and expert judgement as to their viability for wide-scale implementation and economic benefits. The predictions show that the use of more efficient lighting and motors, advanced energy systems and more effective boilers and furnaces will result in a significant reduction in the rates of GHG emissions at an initial cost of between 30 and 90 US$ t⁻¹ of CO₂ release avoided. However, most of these measures have a negative cost per ton of CO₂ reduced, indicating short pay-back periods for the capital investments needed.     

Life-cycle greenhouse gas emissions and energy balances of sugarcane ethanol production in Mexico

The purpose of this work was to estimate GHG emissions and energy balances for the future expansion of sugarcane ethanol fuel production in Mexico with one current and four possible future modalities. We used the life cycle methodology that is recommended by the European Renewable Energy Directive (RED), which distinguished the following five system phases: direct Land Use Change (LUC); crop production; biomass transport to industry; industrial processing; and ethanol transport to admixture plants. Key variables affecting total GHG emissions and fossil energy used in ethanol production were LUC emissions, crop fertilization rates, the proportion of sugarcane areas that are burned to facilitate harvest, fossil fuels used in the industrial phase, and the method for allocation of emissions to co-products. The lower emissions and higher energy ratios that were observed in the present Brazilian case were mainly due to the lesser amount of fertilizers applied, also were due to the shorter distance of sugarcane transport, and to the smaller proportion of sugarcane areas that were burned to facilitate manual harvest. The resulting modality with the lowest emissions of equivalent carbon dioxide (CO_2e) was ethanol produced from direct juice and generating surplus electricity with 36.8 kgCO_2e/GJ_ethanol. This was achieved using bagasse as the only fuel source to satisfy industrial phase needs for electricity and steam. Mexican emissions were higher than those calculated for Brazil (27.5 kgCO_2e/GJ_ethanol) among all modalities. The Mexican modality with the highest ratio of renewable/fossil energy was also ethanol from sugarcane juice generating surplus electricity with 4.8 GJ_ethanol/GJ_fossil.     

Life-cycle energy consumption and greenhouse gas emissions for electricity generation and supply in China

The Well-to-Meter (WTM) analysis module in the Tsinghua-CA3EM model has been used to examine the primary fossil energy consumption (PFEC) and greenhouse gas (GHG) emissions for electricity generation and supply in China. The results show that (1) the WTM PFEC and GHG emission intensities for the 2007 Chinese electricity mix are 3.247 MJ/MJ and 297.688 g carbon dioxide of equivalent (gCO_2,e)/MJ, respectively; (2) power generation is the main contributing sub-stage; (3) the coal-power pathway is the only major contributor of PFEC (96.23%) and GHG emissions (97.08%) in the 2007 mix; and (4) GHG emissions intensity in 2020 will be reduced to 220.470 gCO_2,e/MJ with the development of nuclear and renewable energy and to 169.014 gCO_2,e/MJ if carbon dioxide capture and storage (CCS) technology is employed. It is concluded that (1) the current high levels of PFEC and GHG emission for electricity in China are largely due to the dominant role of coal in the power-generation sector and the relatively low efficiencies during all the sub-stages from resource extraction to final energy consumption and (2) the development of nuclear and renewable energy as well as low carbon technologies such as CCS can significantly reduce GHG emissions from electricity.     

Reducing life cycle greenhouse gas emissions of corn ethanol by integrating biomass to produce heat and power at ethanol plants

A life-cycle assessment (LCA) of corn ethanol was conducted to determine the reduction in the life-cycle greenhouse gas (GHG) emissions for corn ethanol compared to gasoline by integrating biomass fuels to replace fossil fuels (natural gas and grid electricity) in a U.S. Midwest dry-grind corn ethanol plant producing 0.19 hm³ y⁻¹ of denatured ethanol. The biomass fuels studied are corn stover and ethanol co-products [dried distillers grains with solubles (DDGS), and syrup (solubles portion of DDGS)]. The biomass conversion technologies/systems considered are process heat (PH) only systems, combined heat and power (CHP) systems, and biomass integrated gasification combined cycle (BIGCC) systems. The life-cycle GHG emission reduction for corn ethanol compared to gasoline is 38.9% for PH with natural gas, 57.7% for PH with corn stover, 79.1% for CHP with corn stover, 78.2% for IGCC with natural gas, 119.0% for BIGCC with corn stover, and 111.4% for BIGCC with syrup and stover. These GHG emission estimates do not include indirect land use change effects. GHG emission reductions for CHP, IGCC, and BIGCC include power sent to the grid which replaces electricity from coal. BIGCC results in greater reductions in GHG emissions than IGCC with natural gas because biomass is substituted for fossil fuels. In addition, underground sequestration of CO₂ gas from the ethanol plant’s fermentation tank could further reduce the life-cycle GHG emission for corn ethanol by 32% compared to gasoline.     

Reduce energy use and greenhouse gas emissions from global dairy processing facilities

Global butter, concentrated milk, and milk powder products use approximately 15% of annual raw milk production. Similar to cheese and fluid milk, dairy processing of these products can be energy intensive. In this paper, we analyzed production and energy data compiled through extensive literature reviews on butter, concentrated milk, milk and whey powder processing across various countries and plants. Magnitudes of national final and primary specific energy consumption (SEC) exhibited large variations across dairy products; in addition, the final SEC of individual plants and products exhibited significant variations within a country and between countries. Furthermore, we quantified national energy intensity indicators (EIIs) accounting for dairy product mixes and technological advancement. The significant variations of SEC and EII values indicate a high degree of likelihood that there is significant potential for energy savings in the global dairy processing industry. Based upon the study samples, we estimate potential energy savings for dairy processing industry in selected countries, and estimates annual reduction of 9–14 million metric-ton carbon-equivalent¹ could be achieved if measures are implemented to lower SEC values by 50–80% in half of global dairy plants. The paper calls for publication of more energy data from the dairy processing industry.     

Exploring impacts of process technology development and regional factors on life cycle greenhouse gas emissions of corn stover ethanol

This paper examines impacts of regional factors affecting biomass and process input supply chains and ongoing technology development on the life cycle greenhouse gas (GHG) emissions of ethanol production from corn stover in the U.S. Corn stover supply results in GHG emissions from −6 gCO₂eq./MJ ethanol (Macon County, Missouri) to 13 gCO₂eq./MJ ethanol (Hardin County, Iowa), reflecting location-specific soil carbon and N₂O emissions responses to stover removal. Biorefinery emissions based on the 2011 National Renewable Energy Laboratory (NREL) process model are the single greatest emissions source (18 gCO₂eq./MJ ethanol) and are approximately double those assessed for the 2002 NREL design model, due primarily to the inclusion of GHG-intensive inputs (caustic, ammonia, glucose). Energy demands of on-site enzyme production included in the 2011 design contribute to reducing the electricity co-product and associated emissions credit, which is also dependent on the GHG-intensity of regional electricity supply. Life cycle emissions vary between 1.5 and 22 gCO₂eq./MJ ethanol (2011 design) depending on production location (98%–77% reduction vs. gasoline). Using system expansion for co-product allocation, ethanol production in studied locations meet the Energy Independence and Security Act emissions requirements for cellulosic biofuels; however, regional factors and on-going technology developments significantly influence these results.     

Sectoral trends in global energy use and greenhouse gas emissions

Integrated assessment models have been used to project both baseline and mitigation greenhouse gas emissions scenarios. Results of these scenarios are typically presented for a number of world regions and end-use sectors, such as industry, transport, and buildings. Analysts interested in particular technologies and policies, however, require more detailed information to understand specific mitigation options in relation to business-as-usual trends. This paper presents sectoral trend for two of the scenarios produced by the Intergovernmental Panel on Climate Change's Special Report on Emissions Scenarios. Global and regional historical trends in energy use and carbon dioxide emissions over the past 30 years are examined and contrasted with projections over the next 30 years. Macro-activity indicators are analyzed as well as trends in sectoral energy and carbon demand. This paper also describes a methodology to calculate primary energy and carbon dioxide emissions at the sector level, accounting for the full energy and emissions due to sectoral activities.     

Energy balance and greenhouse gas emissions of biodiesel production from oil derived from wastewater and wastewater sludge

It has been recognized that oils derived from microorganism and wastewater sludge are comparable replacements of traditional biodiesel production feedstock, which is energy intensive and costly. Energy balance and greenhouse gas (GHG) emissions are essential factors to assess the feasibility of the production. This study evaluated the energy balance and GHG emissions of biodiesel production from microbial and wastewater sludge oil. The results show that energy balance and GHG emissions of biodiesel produced from microbial oil are significantly impacted by the cultivation methods and carbon source. For phototrophic microorganism (microalgae), open pond system gives 3.6 GJ higher energy gain than photo bioreactor system in per tonne biodiesel produced. For heterotrophic microorganisms, the energy balance depends on the type of carbon source. Three carbon sources including starch, cellulose, and starch industry wastewater (SIW) used in this study showed that utilization of SIW as carbon source provided the most favorable energy balance. When oil extracted from municipal sludge is used for biodiesel production, the energy gain is up to 29.7 GJ per tonne biodiesel produced, which is higher than the energy gain per tonne of biodiesel produced from SIW cultivated microbes. GHG emissions study shows that biodiesel production from microbes or sludge oil is a net carbon dioxide capture process except when starch is used as raw material for microbial oil production, and the highest capture is around 40 tonnes carbon dioxide per tonne of biodiesel produced.     

Assessing the lifecycle greenhouse gas emissions from solar PV and wind energy: A critical meta-survey

This paper critically screens 153 lifecycle studies covering a broad range of wind and solar photovoltaic (PV) electricity generation technologies to identify 41 of the most relevant, recent, rigorous, original, and complete assessments so that the dynamics of their greenhouse gas (GHG) emissions profiles can be determined. When viewed in a holistic manner, including initial materials extraction, manufacturing, use and disposal/decommissioning, these 41 studies show that both wind and solar systems are directly tied to and responsible for GHG emissions. They are thus not actually emissions free technologies. Moreover, by spotlighting the lifecycle stages and physical characteristics of these technologies that are most responsible for emissions, improvements can be made to lower their carbon footprint. As such, through in-depth examination of the results of these studies and the variations therein, this article uncovers best practices in wind and solar design and deployment that can better inform climate change mitigation efforts in the electricity sector.     

Embedded energy and total greenhouse gas emissions in final consumptions within Thailand

In order to quantify the total Greenhouse Gas (GHG) emissions from different commodities, the contribution of emissions in all subprocess chains has to be considered. In embedded energy analysis, the higher order production processes are usually truncated due to a lack of data. To fill the truncated subprocesses up to infinite process chains, energy intensities and GHG emission factors of various final consumptions in the economy evaluated by the Input–Output Analysis (IOA) must be applied. The direct GHG emissions in final consumptions in Thailand are evaluated by imitating the approach in the energy sector of the revised 1996 Intergovernmental Panel on Climate Change (IPCC) guidelines for national GHG inventories. The indirect energy and indirect emissions are evaluated by using the 1998 Input–Output (I–O) table. Results are presented of emissions in the main process, indirect processes, and on each subprocess chain order. The trend of energy intensity and emission factors of all final consumptions for 1995, 1998, 2001 and 2006 are also presented. Results show that the highest energy intensive sector is the electricity sector where fossil fuel is primarily used, but the highest total GHG emitter is the cement industry where the major sources of the emissions are industrial processes and the combustion of fossil fuels. Implication of the emission factors on electricity generating technologies shows that various cleaner electricity generating technologies, including renewable energy technology, could help in global GHG mitigation.     

Sustainable energy development and greenhouse gas emissions in an island power system

The objective of this paper was to investigate the options for the sustainable development of the Northern Ireland energy supply system, reducing greenhouse gas emissions. Particular factors which must be considered centre around the isolation of the system, the prospect of a new gaspipeline and electrical interconnector to the rest of the U.K., and the re‐establishment of an electrical interconnector to the Republic of Ireland. The study has relevance for all similar isolated or island systems, which have particular problems because they tend to be relatively small in size, and their isolation means that inter‐connection with their neighbours is either weak or non‐existent. Because of this, they have to carry greater spare capacity than would normally be the case, with consequent efficiency and cost penalties. Copyright © 2000 John Wiley & Sons, Ltd.     

Transportation: meeting the dual challenges of achieving energy security and reducing greenhouse gas emissions

As the population and economy continue to grow globally, demand for energy will continue to grow. The transportation sector relies solely on petroleum for its energy supply. The United States and China are the top two oil-importing countries. A major issue both countries face and are addressing is energy insecurity as a result of the demand for liquid fuels. Improvements in the energy efficiency of vehicles and the substitution of petroleum fuels with alternative fuels can help contain growth in the demand for transportation oil. Although most alternative transportation fuels — when applied to advanced vehicle technologies — can substantially reduce greenhouse emissions, coal-based liquid fuels may increase greenhouse gas emissions by twice as much as gasoline. Such technologies as carbon capture and storage may need to be employed to manage the greenhouse gas emissions of coal-based fuels. At present, there is no ideal transportation fuel option to solve problems related to transportation energy and greenhouse gas emissions. To solve these problems, research and development efforts are needed for a variety of transportation fuel options and advanced vehicle technologies.     

Evaluating fuel ethanol feedstocks from energy policy perspectives: A comparative energy assessment of corn and corn stover

Concerns surrounding the continued, un-checked use of petroleum-based fuels in the transportation sector, the search for more sustainable, renewable alternatives, and the constraints of the existing supply infrastructure in the United States have placed a spotlight on biomass-derived fuels. The central question of the ethanol debate has changed from “Should we make ethanol?” to “From what should we make ethanol?” emphasizing the importance of understanding the differences between specific biomass supply systems for fuel ethanol. When presented with numerous options, the priorities of an individual decision maker will define which feedstock alternative is the most appropriate choice for development from their perspective. This paper demonstrates how energy data can be successfully used to quantify assessment metrics beyond a standard net energy value calculation, thus quantifying the relative “value” of ethanol supply systems. This value is defined based on decision-maker priorities that were adopted from national energy policy priorities: increased national energy security and increased conservation of energy resources. Nine energy assessment metrics that quantify detailed system energy data are calculated and a straightforward comparative assessment is performed between corn and corn stover feedstocks produced under the same farm scenario. Corn stover is shown to be more compatible with the national energy policy priorities and it is recommended that additional research be performed on utilizing this feedstock from the corn farm.     

Reducing greenhouse gas emissions: Lessons from state climate action plans

We examine how state-level factors affect greenhouse gas (GHG) reduction policy preference across the United States by analyzing climate action plans (CAPs) developed in 11 states and surveying the CAP advisory group members. This research offers insights into how states approach the problem of choosing emissions-abatement options that maximize benefits and minimize costs, given their unique circumstances and the constellation of interest groups with power to influence state policy. The state CAPs recommended ten popular GHG reduction strategies to accomplish approximately 90% of emissions reductions, but they recommended these popular strategies in different proportions: a strategy that is heavily relied on in one state’s overall portfolio may play a negligible role in another state. This suggests that any national policy to limit GHG emissions should encompass these key strategies, but with flexibility to allow states to balance their implementation for the state’s unique geographic, economic, and political circumstances. Survey results strongly support the conclusion that decisions regarding GHG reductions are influenced by the mix of actors at the table. Risk perception is associated with job type for all strategies, and physical and/or geographic factors may underlie the varying reliance on certain GHG reduction strategies across states.     

Benchmarking energy use and greenhouse gas emissions in Singapore’s hotel industry

Hotel buildings are reported in many countries as one of the most energy intensive building sectors. Besides the pressure posed on energy supply, they also have adverse impact on the environment through greenhouse gas emissions, wastewater discharge and so on. This study was intended to shed some light on the energy and environment related issues in hotel industry. Energy consumption data and relevant information collected from hotels were subjected to rigorous statistical analysis. A regression-based benchmarking model was established, which takes into account, the difference in functional and operational features when hotels are compared with regard to their energy performance. In addition, CO₂ emissions from the surveyed hotels were estimated based on a standard procedure for corporate GHG emission accounting. It was found that a hotel’s carbon intensity ranking is rather sensitive to the normalizing denominator chosen. Therefore, carbon intensity estimated for the hotels must not be interpreted arbitrarily, and industry specific normalizing denominator should be sought in future studies.     

Mitigating greenhouse gas emissions from China's cities: Case study of Suzhou

Knowledge of the factors driving greenhouse gas (GHG) emissions from cities is crucial to mitigating China's anthropogenic emissions. In this paper, the main drivers increasing GHG emissions from the Chinese city of Suzhou between 2005 and 2010 were identified and quantitatively analyzed using the Kaya identity and the log-mean Divisia index method. We found that economy and population were the major drivers of GHG emissions in Suzhou, having contributed 162.20% and 109.04%, respectively, to the increase in emissions. A decline in carbon intensity, which was caused by the declining energy intensity and an adjustment to the mixture of power and industrial structures, was the major determinant and accounted for a reduction of 171.24% in GHG emissions. Slowing and maintaining healthy growth rates of economy and population could be the primary and most effective means if Suzhou tries to curb the total emissions over the short term. It may be more realistic for Suzhou to control emissions by optimizing the economic structure for low-carbon industrial development because of the city's relative high energy requirements and low potential to mitigate GHGs by adjusting the energy mixture.     

Weekly greenhouse gas emissions of municipalities: Methods and comparisons

Local authorities need timely information on their greenhouse gas (GHG) emissions and their causes, comparison with other municipalities and tools for dissemination of information to the citizens. This paper presents a weekly GHG emission calculation system, CO₂-report, which provides such data for citizens and local decision-makers in a timely manner, in contrast to the official emissions statistics, which are available on an annual basis 1–2 years afterwards. In this paper, we present the methodology and three main outputs of CO₂-report: (1) weekly GHG emissions; (2) advance annual emissions; and (3) final annual emissions for 2009 with comparison of 64 municipalities in Finland. We explain the reasons for the large variability of annual emissions, from 5 to 13 t CO₂-eq/capita, discuss the accuracy of advance and final emission estimates at local level, and show the weekly variability of emissions for three example municipalities with different emission profiles.     

Valuing the greenhouse gas emissions from nuclear power: A critical survey

This article screens 103 lifecycle studies of greenhouse gas-equivalent emissions for nuclear power plants to identify a subset of the most current, original, and transparent studies.     

Energy and associated greenhouse gas emissions from household appliances in Malaysia

Today, electricity is an indispensable key for civilization and development. The trend of electricity consumption is rather escalating. Electricity generation principally depends upon fossil fuels. In one hand, the stocks of these fuels have been confirmed to be critically limited. On the other hand, in process of electricity generation by means of these fuels, a number of poisonous by-products adversely affect the conservation of natural eco-system. Further, electricity driven appliances use emanate anti-environmental gases that also affect human health and climate. Therefore, estimation of energy consumption for operating household appliances, savings of energy under policy intervention, and emission of poisonous gases in a fast developing country deserve academic attention.     

Reducing greenhouse gas emissions by inducing energy conservation and distributed generation from elimination of electric utility customer charges

This paper quantifies the increased greenhouse gas emissions and negative effect on energy conservation (or “efficiency penalty”) due to electric rate structures that employ an unavoidable customer charge. First, the extent of customer charges was determined from a nationwide survey of US electric tariffs. To eliminate the customer charge nationally while maintaining a fixed sum for electric companies for a given amount of electricity, an increase of 7.12% in the residential electrical rate was found to be necessary. If enacted, this increase in the electric rate would result in a 6.4% reduction in overall electricity consumption, conserving 73 billion kW h, eliminating 44.3 million metric tons of carbon dioxide, and saving the entire US residential sector over $8 billion per year. As shown here, these reductions would come from increased avoidable costs, thus leveraging an increased rate of return on investments in energy efficiency, energy conservation behavior, distributed energy generation, and fuel choices. Finally, limitations of this study and analysis are discussed and conclusions are drawn for proposed energy policy changes.