Compatibility study of recycled poly(vinyl chloride)/styrene‐acrylonitrile blends

The aim of the present study is to analyze the compatibility between recycled Poly(vinyl chloride) (PVC) and styrene‐acrylonitrile copolymer (SAN). With this objective recycled PVC coming from credit cards have been blended with both virgin and recycled SAN with the aim of increase the benefits of recycled PVC. The compatibility of the components will be crucial for the final properties of the material. Furthermore, the recycled nature of some of the components will determine the compatibilization capability of the blend. The degradation level in the recycled materials was determined using Fourier transform infrared spectroscopy (FTIR). The compatibility between the PVC and the SAN was studied using differential scanning calorimetry and dynamic mechanical analysis. A greater compatibility was observed in mixtures of PVC and virgin SAN than in mixtures of PVC and recycled SAN. Finally, a morphological study of the fracture surface under cryogenic conditions was carried out using scanning electron microscopy. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Experimental investigations of polypropylene and poly(vinyl chloride) composites filled with plerospheres

Plerospheres, defined here as superfine spherical particles (0.5–5 μm) separated from fly ash (rather than as other solid spherical particles, as some have used the term), are separated from coal fly ash but are dramatically different from it. Plerospheres can be used as polymer fillers to improve the properties of composites. With plerospheres used as fillers for polypropylene (PP) and unplasticized poly(vinyl chloride) (UPVC), the effects of the filler content, the particle sizes of the plerospheres, and the coupling agent on the composite properties were studied. The particle sizes of the plerospheres were 2 and 5 μm. The results suggested that the notched impact properties both at a normal temperature and a low temperature and the tensile and flexural properties of plerosphere/PP increased significantly when the content was increased from 0 to 30 wt % and further increased with the addition of a coupling agent. Differential scanning calorimetry indicated that the thermal properties of the plerosphere/PP composite improved. The surface characteristics and morphology of the impact fracture surface were examined in detail with scanning electron microscopy. The rheological performance of plerosphere/UPVC pipe composites obviously improved; the plasticizing time was shortened, and the maximum torque was reduced. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 126–131, 2004     

Miscibility of segmented polyurethane/poly(vinyl chloride) blends

Miscibilities of segmented polyurethanes (SPUs) and poly(vinyl chloride) (PVC) or functionalized poly(vinyl chloride) (FPVC) were studied with dynamic mechanical analysis, differential scanning calorimetry, and X‐ray diffraction. Mechanical properties of the blends were also studied with tensile measurements. The miscibility of the blends depended greatly on the hard‐segment content of SPU and the existence of the functional groups. The combination of SPU with a low hard‐segment content and PVC with functional groups made the blend system miscible. Moreover, controlling the blend composition of SPU/FPVC allowed us to modify the mechanical properties of SPU, where the elongation at break was multiplied without a significant change in its tensile strength. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 3022–3029, 2001     

Behavior of flexible poly(vinyl chloride)/poly(hydroxybutyrate valerate) blends

Blends of flexible poly(vinyl chloride) (PVC) and a poly(hydroxybutyrate valerate) (PHBV) copolymer were prepared and characterized with different techniques. The tensile strength of PVC did not show a marked reduction at PHBV concentrations up to 50 phr, despite a lack of miscibility between the two polymers. The crystallization of the PHBV copolymer was markedly hindered by the presence of PVC, as calorimetric results revealed. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Preparation and thermomechanical characterization of poly(vinyl chloride) blends compatible with terpolymer‐containing maleic anhydride

In this study, I aimed to change the thermomechanical characteristics of poly(vinyl chloride) (PVC), which is widely used in commercial areas. Copolymers containing maleic anhydride (MA) units are commonly used to obtain compatible polymer blends. In our study, PVC blends were also prepared with the terpolymers with and without anhydride units. I assumed that the impact of the terpolymer on the thermomechanical characteristics of the PVC material could be more effectively controlled. For this purpose, two sets of six different blends of PVC with or without MA were synthesized, among which one was pure PVC, but the other five blends contained 2, 4, 6, 8, and 10% terpolymer. In conclusion, I observed that the terpolymer with the MA unit more regularly changed the thermomechanical characteristics of PVC. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 1586–1589, 2004     

Blends of plasticized poly(vinyl chloride) and waste flexible poly(vinyl chloride) with waste nitrile rubber powder

Blends of poly(vinyl chloride) (PVC) with varying contents of plasticizer and finely ground powder of waste nitrile rubber rollers were prepared over a wide range of rubber contents through high‐temperature blending. The effects of rubber and plasticizer (dioctyl phthalate) content on the tensile strength, percentage elongation, impact properties, hardness, abrasion resistance, flexural crack resistance, limiting oxygen index (LOI), electrical properties, and breakdown voltage were studied. The percentage elongation, flexural crack resistance, and impact strength of blends increased considerably over those of PVC. The waste rubber had a plasticizing effect. Blends of waste plasticized PVC and waste nitrile rubber showed promising properties. The electrical properties and LOI decreased with increasing rubber and plasticizer content. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1552–1558, 2004     

Thermal properties of graphite‐loaded nitrile rubber/poly(vinyl chloride) blends

The thermal properties (thermal conductivity, thermal diffusivity, and specific heat capacity) of nitrile rubber (NBR)/poly(vinyl chloride) (PVC) blends were measured in the temperature range of 300–425 K. The incorporation of graphite into the NBR/PVC (30/70) matrix improved its thermal properties. Moreover, these properties slightly changed with the temperature. The thermal conductivity values of the prepared samples were compared with values modeled according to the Maxwell–Eucken, Cheng–Vachon, Lewis–Nielsen, geometric mean, and Agari–Uno models. The Agari–Uno model best predicted the effective thermal conductivity for the whole range of blend ratios and for the whole range of graphite contents in NBR/PVC (30/70)/graphite composites. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Analysis of low‐density polyethylene‐g‐poly(vinyl chloride) copolymers formed in poly(vinyl chloride)/low‐density polyethylene melt blends with gel permeation chromatography and solid‐state 13C‐NMR

Gel permeation chromatography (GPC) and solid‐state ¹³C‐NMR techniques were used to analyze the structural changes of poly(vinyl chloride) (PVC) in blends of a low‐density polyethylene (LDPE) and PVC during melt blending. The GPC results showed that the weight‐average molecular weight (M_w) of PVC increased with LDPE content up to 13.0 wt % and then decreased at a LDPE content of 16.7 wt %, whereas the number‐average molecular weight remained unchanged for all of LDPE contents used. The ¹³C‐NMR results suggest that the increase in M_w was associated with the formation of a LDPE‐g‐PVC structure, resulting from a PVC and LDPE macroradical cross‐recombination reaction during melt blending. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 3167–3172, 2004     

Improving the antifouling property of poly(vinyl chloride) membranes by poly(vinyl chloride)‐g‐poly(methacrylic acid) as the additive

To improve the antifouling property of poly(vinyl chloride) (PVC) membranes, a series of poly(methacrylic acid) grafted PVC copolymers (PVC‐g‐PMAA) with different grafting degree were synthesized via one‐step atom transfer radical polymerization process utilizing the labile chlorines on PVC backbones followed by one‐step hydrolysis reaction. PVC/PVC‐g‐PMAA blend membranes with different grafting degree and copolymer content were prepared by nonsolvent induced phase separation method. The surface chemical composition, surface charge, membrane structures, wettability, permeability, separation performances and the fouling resistance of blend membranes were carefully investigated. The results indicated that the PMAA chains were segregated towards the surface and the membranes were endowed with negative charge. The hydrophilicity and permeability of the blend membranes were obviously improved. Furthermore, the antifouling ability especially at neutral or alkaline environments was also significantly increased. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42745.     

Mechanical properties of poly(vinyl chloride) blends and corresponding graft copolymers

The mechanical properties of the poly (vinyl chloride) (PVC) and poly (glycidyl methacrylate) [poly (GMA)] blend system and the PVC and poly (hydroxyethyl methacrylate) [poly (HEMA)] blend system and their crosslinked films were investigated. At the same time, the mechanical properties for the corresponding graft copolymers such as PVC-g-GMA, PVC-g-HEMA, and their crosslinked films were also investigated in this study. The results showed that the tensile strengths for PVC–poly (GMA) blend systems were higher than those for PVC-g-GMA graft copolymer, and the tensile strengths for PVC-g-HEMA were higher than those for PVC-poly (HEMA) blend systems. However, the mechanical properties for the PVC–poly (GMA) blend system were not affected by the crosslinking of the blend system, but those for PVC-poly (HEMA) and their graft copolymers decreased with an increase of the equivalent ratio ([NCO]/[OH]) of the crosslinker. Finally, the surface hydrophilicity of the PVC-g-HEMA graft copolymer and PVC-poly (HEMA) blends were also assessed through measuring the contact angle. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 67: 307–319, 1998     

Nonisothermal crystallization kinetics of polypropylene/polypropylene‐g‐polystyrene/polystyrene blends

The nonisothermal crystallization kinetics of polypropylene (PP), PP/polystyrene (PS), and PP/PP‐g‐PS/PS blends were investigated with differential scanning calorimetry at different cooling rates. The Jeziorny modified Avrami equation, Ozawa method, and Mo method were used to describe the crystallization kinetics for all of the samples. The kinetics parameters, including the half‐time of crystallization, the peak crystallization temperature, the Avrami exponent, the kinetic crystallization rate constant, the crystallization activation energy, and the F(T) and a parameters were determined. All of the results clearly indicate that the PP‐g‐PS copolymer accelerated the crystallization rate of the PP component in the PP/PP‐g‐PS/PS blends. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Tensile properties of a poly(vinyl chloride) composite filled with poly(methyl methacrylate) grafted to oil palm empty fruit bunches

The influence of oil palm empty fruit bunch (OPEFB) fiber and oil palm empty fruit bunches grafted with poly(methyl methacrylate) (OPEFB‐g‐PMMA) on the tensile properties of poly(vinyl chloride) (PVC) was investigated. The OPEFB‐g‐PMMA fiber was first prepared with the optimum conditions for the grafting reaction, which were determined in our previous study. To produce composites, the PVC resin, OPEFB‐g‐PMMA fiber or ungrafted OPEFB fiber, and other additives were first dry‐blended with a laboratory blender before being milled into sheets on a two‐roll mill. Test specimens were then hot‐pressed, and then the tensile properties were determined. A comparison with the composite filled with the ungrafted OPEFB fiber showed that the tensile strength and elongation at break increased, whereas Young's modulus decreased, with the incorporation of 20 phr OPEFB‐g‐PMMA fiber into the PVC matrix. The trend of the tensile properties obtained in this study was supported by functional group analysis, glass‐transition temperature measurements, and surface morphological analysis. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Production of polymeric membranes made of polypropylene,poly(ethylene‐co‐vinyl acetate), and poly(vinyl alcohol)

In this study, we prepared and characterized membranes containing polypropylene, poly(ethylene‐co‐vinyl acetate) (EVA), and poly(vinyl alcohol) (PVA). The production process involved blend extrusion and calendering followed by solvent extraction by toluene and water of the EVA and PVA phases. Morphology studies involving scanning electron microscopy determined the pore size distribution at the surface and in the internal regions of the membrane. The resulting membrane properties were related to the processing variables (extension rate, process temperature, and solvent extraction methods) and blend composition. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 3275–3286, 2004     

Contributions to characterization of poly(vinyl chloride)–lignin blends

The present study evaluates the impact of blending organosolv and kraft lignins, which are natural polymer by‐products in the pulp and paper industry, with plasticized poly(vinyl chloride) (PVC) in flooring formulations. Also examined is the impact of replacing dioctyl phthalate, a PVC industry general‐purpose plasticizer, with diethylene glycol dibenzoate (Benzoflex 2‐45), tricresyl phosphate (Lindol), or alkyl sulfonic phenyl ester (Mesamoll) in these formulations. The influence of the different types of lignins and plasticizers on the processibility, thermal, and mechanical properties of the blends is discussed. These properties demonstrate that partial replacement of PVC (20 parts) with different lignins is feasible for some formulations that can be successfully used as matrices for a high level of calcium carbonate filler in flooring products. In addition, the data demonstrate that the presence of certain plasticizers, which interfere with the intramolecular interactions existing in lignins, may allow the lignin molecules to have more molecular mobility. The morphology and the properties of PVC plasticized lignin blends are strongly influenced by the degree and mode of the lignin plasticization and its dispersion within the PVC matrix. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2732–2748, 2006     

Melt grafting of n‐butyl methacrylate onto poly(vinyl chloride): Synthesis and characterization*

The graft copolymerization of n‐butyl methacrylate monomer onto compounded poly(vinyl chloride) was carried out by melt‐mixing process in a Brabender plasticorder (BPCR) using a free‐radical initiator. The reaction conditions such as initiator and monomer concentration, shear rate (rpm), residence time, and temperature were optimized in the mixing head of BPCR attached to a torque rheometer. The graft copolymers were Soxhlet extracted with cyclohexane and were characterized by intrinsic viscosity, FTIR, and ¹³C‐NMR spectroscopy. A maximum of 14% grafting was obtained. The graft copolymer showed significant improvement in processibility and both thermal and mechanical properties. Scale‐up studies of the optimized recipe were carried out in a single‐screw extruder for commercial trials/evaluation. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2442–2449, 2004     

Miscibility and rheological properties of poly(vinyl chloride)/styrene–acrylonitrile blends prepared by melt extrusion

Styrene–acrylonitrile (SAN) with acrylonitrile (AN) concentrations of 11.6–26 wt % and α‐methylstyrene acrylonitrile (αMSAN) with a wide range of AN concentrations are miscible with poly(vinyl chloride) (PVC) through solution blending. Here we examine the rheological properties and miscibility of PVC/SAN and PVC/αMSAN blends prepared by melt extrusion for commercial applications. We have investigated the rheological properties of the blends with a rheometer and a melt indexer. The PVC/SAN and PVC/αMSAN blends have a low melting torque, a long degradation time, and a high melt index, and this means that they have better processability than pure PVC. The miscibility of the blends has been characterized with differential scanning calorimetry, dynamic mechanical thermal analysis, and advanced rheometrics expansion system analysis. The miscibility of the blends has also been characterized with scanning electron microscopy. The SAN series with AN concentrations of 24–31 wt % is immiscible with PVC by melt extrusion, whereas αMSAN with 31 wt % AN is miscible with PVC, even when they are blended by melt extrusion, because of the strong interaction between PVC and αMSAN. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Binary blends of poly(vinyl chloride) stabilized by lithium acetate‐thermal studies

A series of blends of poly(vinyl chloride) (PVC) with (1) poly(methyl methacrylate) (PMMA) or (2) polyoxymethylene (POM), with lithium acetate as a stabilizing agent, was investigated by differential scanning calorimetry (DSC), scanning electron microscopy (SEM), and thermogravimetric analysis (TGA), either alone or coupled with Fourier transform infrared (FTIR) spectroscopy. It was found that lithium acetate has a significant effect on the thermal properties of blends under investigation. It causes the initial decomposition temperatures to increase by about 60–150°C for PVC–POM blends, a substantial suppression of the volatile products evolution for PVC/PMMA blends, and an improvement in the surface morphology for both polymer systems by lowering the degree of roughness. The origin of these effects was discussed by analysis of the intermolecular complexation between metal salt and PVC structural arrangements in the blends. Such interactions may lead to the formation of long‐range, directional‐specific structural regularities, which in turn thermally stabilize the whole system (strong interactions model). © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 2576–2587, 1999     

Mechanochemical preparation of a novel polymeric photostabilizer for poly(vinyl chloride)

The preparation of a novel polymeric photostabilizer was carried out via the vibromilling of poly(vinyl chloride) (PVC) powder, a reactive light stabilizer (r‐LS), and a peroxide initiator in ball‐containing jars with a planetary ball mill for a certain time. The effects of the initiator content, milling time, and temperature on the grafting ratio were studied with gravimetric analysis and intrinsic viscosity measurements. Fourier transform infrared and ultraviolet–visible spectra were used to investigate the structural development of the mixture of the r‐LS and PVC during vibromilling. The results showed that the r‐LS was grafted onto PVC chains successfully, and the aforementioned factors had a significant effect on the grafting ratio. The optimum preparation conditions were 0.5 wt % initiator, 8 h, and 20°C. A grafting mechanism is proposed. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Miscibility and thermal behavior of poly(vinyl chloride)/feather keratin blends

Various poly(vinyl chloride) (PVC)/feather keratin (FK) blends were prepared via a solution blending method in the presence of N,N‐dimethylformamide as a solvent. The miscibility of the blends was studied with different analytical methods, such as dilute solution viscometry, differential scanning calorimetry, refractometry, and atomic force microscopy. According to the results obtained from these techniques, it was concluded that the PVC/FK blend was miscible in all the studied compositions. Specific interactions between carbonyl groups of the FK structure and hydrogen from the chlorine‐containing carbon of the PVC were found to be responsible for the observed miscibility on the basis of Fourier transform infrared spectroscopy. Furthermore, increasing the FK content in the blends resulted in their miscibility enhancement. The thermal stability of the samples, as an important characteristic of biobased polymer blends, was finally examined in terms of their FK weight percentage and application temperature. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Small‐angle X‐ray scattering study of modified porous suspension–poly(vinyl chloride) particles

Small‐angle X‐ray scattering (SAXS) was applied to investigate the microstructure of unmodified and modified porous commercial suspension‐type poly(vinyl chloride) (PVC) particles. The modified PVC particles were prepared by an in situ stabilizer‐free polymerization/crosslinking of particles absorbed with a monomer/crosslinker/peroxide solution. The modifying polymers include styrene with or without divinyl benzene (DVB) as a crosslinker and methyl methacrylate (MMA) with or without ethylene glycol dimethacrylate (EGDMA) as a crosslinker. The SAXS method was used to highlight the effect of polystyrene (PS) on the microstructure of PVC particles and to evaluate the characteristic lengths, both in the PVC/PS and the PVC/XPS (PS crosslinked with 0 and 5% DVB, respectively) systems. A model is suggested, where during the synthesis modification process, swelling of PVC by styrene and styrene polymerization occur simultaneously. PVC swelling by styrene causes destruction of the PVC subprimary particles, whereas styrene polymerization leads to phase separation resulting from incompatibility of the polymers. It was further suggested that because of PVC swelling by styrene, structure of the subprimary particles is lost. Therefore the characteristic lengths of PVC/PS and PVC/XPS, as calculated from the SAXS measurements, were attributed to the size of the phase‐separated PS and XPS inclusions, respectively. The SAXS method also shows that PMMA and XPMMA do not influence the PVC microstructure. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 95: 1024–1031, 2005