可生物降解聚酯酰胺共聚物的合成与表征

以两种合成的酰胺二元醇和癸二酸为原料合成了可生物降解的聚酯酰胺共聚物,研究了该癸半晶性聚合物的合成、结晶及其生物降解性,并应用ＩＲ,＾１Ｈ ＮＭＲ,ＳＥＭ及ＤＳＣ进行了表征。     

可生物降解聚酯P(DHCA-co-LA)的合成与表征

由3,4-二羟基肉桂酸(DHCA)与D,L-乳酸(LA)经熔融缩聚法得到了新型可生物降解聚酯P(DHCA-co-LA),采用傅立叶变换红外(FTIR),核磁共振(1H-NMR)和凝胶渗透色谱(GPC)对该共聚物的组成与相对分子量进行表征,结果表明其结构明确.改变DHCA与LA单体的配比,得到的P(DHCA-co-LA)的分子量和分子量分布在同一数量级.通过差示扫描量热仪(DSC)、紫外(UV)和荧光光谱研究了共聚物的热性能、紫外与荧光性能,结果表明,P(DHCA-co-LA)有明显的玻璃化转变温度(Tg),随LA的投料比从0增加至50 mol%时,其Tg从132.26℃下降至99.12℃;当LA的投料比为20 mol%时,所得到的聚酯型共聚物溶液呈现最强的荧光强度;在紫外光照下,共聚物可进行环加成反应,但交联度总体较低;紫外光照65 min后,在荧光显微镜下观察到交联颗粒形态稳定、有较强的荧光.X-射线衍射(XRD)测定结果显示,由结晶性DHCA和LA共聚形成的P(DHCA-co-LA)为无定形聚合物,有利于生物降解.共聚物在土壤中的降解实验表明,其降解速度随体系中LA含量的增加而减缓.     

生物降解性聚己内酯-聚醚嵌段共聚物的合成及表征

A new biodegradable Poly (e-caprolactone)-Poly (ethylene glycol) block copolymer (PCL-b-PEG) has been synthesized by co-polycondensation reaction of e-caprolactone (e-CL) and poly (ethylene glycol) (PEG) in the presence of Ti(OBu)4 catalyst. The composition,hy-drophilicity and crystallinity of the copolymer can be controlled by changing the feeding dose of reaction system. The degradation rate of the PCL-b-PEG copolymer is improved by introducing the PEG segment, and the more the PEG content in the copolymers,the faster the degradation rate of the copolymer.     

P(VDF-co-TrFE-co-CTFE)-g-SPS共聚物的合成表征

采用商业聚(偏氟乙烯-co-三氟氯乙烯)(P(VDF-co-CTFE)为原料,结合氢化反应、ATRP和磺化反应系统合成了一系列聚(偏氟乙烯-co-三氟乙烯-co-三氟氯乙烯)-g-磺化聚苯乙烯(P(VDF-co-TrFE-co-CTFE)-g-SPS)共聚物.重点研究了测试环境(如温度和相对湿度)、聚合物微观结构(接枝密度,接枝长度等)对聚合物形貌、吸水率和质子传导率的影响.研究表明,在接枝量相同的情况下,随着接枝密度的降低,聚合物的相分离更加明显,亲水相从孤岛型逐渐转变为部分连续型;聚合物的吸水率随磺酸基摩尔含量增加而提高;聚合物的质子传导率随着温度的提高和湿度的降低而降低;在较低温度下,聚合物的电导率随接枝密度的增加而降低,而在较高温度下,聚合物的电导率随接枝密度的增加而升高.组成优化的P(VDF-co-TrFE-co-CTFE)-g-SPS共聚物在30～120℃和高湿度条件下,其质子传导率明显优于Nafion112膜.     

生物降解性聚己内酯-聚醚嵌段共聚物的合成及表征

生物降解性高分子具有在生理条件下可以自行降解、代谢,使之被机体吸收或被排泄的特点,因此可以免除在进入体内后需再经手术方法取出的麻烦。由此,生物降解性高分子在作为药物释放体系的药物载体和在医疗上作为外科手术组织修饰材料等方面具有十分广阔的应用前景,并且成为当前生物医用高分子领域的一个重要的研究课题。     

氨基酸衍生可生物降解聚酯酰胺的合成与表征

以L-酪氨酸、乙二醇与4种不同的二酸酰氯为起始材料合成了4种具有酚羟基侧链的聚酯酰胺.用FT-IR、NMR表征了聚酯酰胺的化学结构;DSC、TG分析了聚合物的热性质;乌氏黏度计法测算了合成聚合物的特性黏度值,研究了聚酯酰胺的亲水性与主链结构的关系.结果表明:合成了预期结构的聚合物,该聚合物的玻璃化温度较低,而热分解温度较高,具有较好的热处理性能.同时,随着主链中柔性链段增加,玻璃化温度与热分解温度随之降低,热稳定性变差,在相同时间的吸水率明显提高.     

侧链为光敏感基团的可生物降解聚氨酯的合成及表征

设计合成2-甲基-2-肉桂酰氧甲基-1,3-丙二醇(MCO)作为扩链剂,并以聚乳酸二醇(PLA diol)为软段,异佛尔酮二异氰酸酯(IPDI)和MCO为硬段制备了一系列侧链含有肉桂基团的可生物降解聚氨酯.结果表明MCO具有较高的反应活性,可满足制备高分子量聚氨酯的要求.聚氨酯结构中的肉桂双键可在紫外光和光引发剂的共同作用下,发生快速的交联反应,短时间内形成交联结构.软段结构相同时,凝胶含量随MCO含量的增加而增加.硬段结构相同时,凝胶含量随软段分子量的增加而减少.适度的交联可提高拉伸强度和形变回复率.     

淀粉-醋酸乙酯-甲基丙烯酸甲酯接枝共聚物的合成及生物降解研究

用硝酸铈铵为引发剂,合成了淀粉 醋酸乙烯酯 甲基丙烯酸甲酯接枝共聚物,用质子核磁共振谱研究了接枝支链的化学组成,用Ｘ 射线粉末衍射研究了接枝共聚物的结晶结构变化,分别用实验室酶分解法和室外土壤掩埋法测定了接枝共聚物的生物降解性能,结果说明,仅接枝共聚物中的淀粉部分能被微生物降解,接枝支链部分不能被降解．     

电活性可生物降解材料聚乳酸与苯胺五聚体嵌段共聚物的合成与表征

人体任何一个细微的活动都与生物电有关,外界的刺激、心脏跳动和肌肉收缩、大脑思维等都伴随着生物电的产生和变化,为了寻求一种理想的能够在人体内传导生物电信号的神经传导材料,我们设计合成了既具有电活性,同时又具有良好生物相容性和可生物降解性的材料——聚乳酸（PLA）与苯胺齐聚物的嵌段共聚物,苯胺齐聚物具有和聚苯胺相似的电化学性质,且有更好的溶解性。     

可生物降解的聚乳酸弹性体的合成与表征

本文将丙交酯（ＤＬ－ＬＡ）与聚乙二醇（ＰＥＧ）的预聚体用甲苯－二异氰酸酯８０（ＴＤＩ）扩链，得到了一系列的聚乳酸（聚醚）型聚氨酯（ＰＥＧ－ＰＬＡ／ＰＵ）弹性体。对预聚体和弹性体分别进行了ＩＲ、ＨＮＭＲ和ＤＭＡ表征，并测定了弹性体的力学性能。结果表明，ＬＡ与ＰＥＧ生成的预聚体是一种三嵌段结构：ＨＯ－ＰＬＡ－ＰＥＧ－ＰＬＡ－ＯＨ。随着ＰＥＧ含量的增加，弹性体的玻璃化温度下降；ＰＥＧ分子量增大时，弹性体     

6－甲基－2，5－二酮基－吗啉与己内酯的嵌段共聚物的合成与表征

６－甲基－２，５－二酮基－吗啉与己内酯的嵌段共聚物的合成与表征叶卫平，顾忠伟，杨纪元，徐琳，陈先丽（国家计划生育委员会科学技术研究所，北京，１０００８１）侯明山（燕山石化研究院，北京，１０２５４９）关键词生物降解，６－甲基－２，５－二酮基－吗啉，己内...     

6－甲基－2，5－二酮基－吗啉与己内酯的嵌段共聚物的合成与表征

he block copelymer of 6-- methyl-- morpholinedione and caprolactone have been synthesized based on the stepwise addition of 6 -- methyl -- morpholinedione to the hydroxyl end group of prepolymers using stannous octoate as a catalyst. Themolecular weight of pre-polymer of caprolactone was determined by the molar ratio of caprolactone and 1, 4-butanediol. The block structure was confirmed andcharacterized by means of ¹H-- NMR, ¹³C-- NMR, IR, and GPC. The thermal analysis were also reported and compared with the random copolymers.     

SYNTHESIS AND CHARACTERIZATION OF WATER-SOLUBLE BLOCK COPOLYMERS WITH AN END-TAGGED NAPHTHALENE PROBE

Water-soluble A-B block copolymers of 2-perfluoroethyl-2-oxazoline or 2-pentyl-2-oxazoline as hydrophobic monomers and 2-methyl-2-oxazoline as hydrophilic monomer were prepared by means of the living cationic ring-opening polymerization. The polymerization was initiated with N-methyl-2-(1-naphthyl)-2-oxazolinium trifluoromethanesulfonate as fluorescence label followed by sequential addition of the hydrophobic and the hydrophilic monomer. The polymerization was monitored by ¹H NMR spectroscopy and gel permeation chromatography (GPC) measurements. The results revealed that fluorophilic block copolymers can be prepared by this method while lipohilic block copolymers are not accessible by this monomer sequence. Micelle formation of the fluorophilic block copolymers in aqueous solution was studied by means of steady-state fluorescence spectroscopy which confirmed strong intermolecular excimer formation of the terminal bounded naphthalene moiety. In chloroform as a good solvent for both blocks, only monomer fluorescence could be observed.     

生物可降解聚磷腈接枝聚酯共聚物的合成和表征

初步探索了利用酯交换方法制备聚磷腈接枝聚酯共聚物的可能性 .实验发现 ,利用聚酯的端羟基与甘氨酸乙酯全取代的聚磷腈进行酯交换反应 ,是可以获得聚磷腈接枝聚酯共聚物的 .但这种制备过程 ,不仅要求聚酯材料的热稳定性相对较好 ,以及融体粘度较低 ,还要求氨基酸酯取代聚磷腈的热稳定性较好 ,才能获得比较满意的结果 .因此此法更适宜于制备聚磷腈接枝聚己内酯共聚物 ,而且聚己内酯的分子量不宜超过 80 0 0 .     

ANTIMICROBIAL ACTIVITY OF COPOLYMERS OF 2,4-DICHLOROPHENYL ACRYLATE WITH STYRENE: SYNTHESIS, CHARACTERIZATION AND REACTIVITY RATIOS

 Some copolymers of 2,4-dichlorophenyl acrylate (2,4-DCPA) with styrene (St) of different feed compositions were prepared by free radical polymerization technique using 2,2 -azobisisobutyronitrile (AIBN) as an initiator, and the copolymers were characterized by IR spectroscopy. The copolymer composition obtained by UV-spectra led to determination of reactivity ratio by employing Fineman-Ross (F-R) and Kelen-Tudos (K-T) methods. Average molecular weight, as well as intrinsic viscosity, was obtained by vapor pressure osmometry (VPO) and Ubbleholde viscometer. Thermo gravimetric analysis (TGA) and differential thermal analysis (DTA) of copolymers were carried out under nitrogen atmosphere. Antimicrobial effects of the homo and copolymers were also investigated against various microorganisms such as bacteria, fungi and yeasts.     

聚乙烯-聚异戊二烯两嵌段共聚物的合成和表征

以正丁基锂为引发剂,阴离子聚合合成了聚丁二烯-聚异戊二烯两嵌段共聚物,然后以2-乙基己酸钴/三乙基铝配位络合催化体系,将其中丁二烯段进行选择性氢化,制备了聚乙烯-聚异戊二烯两嵌段共聚物.对这两种嵌段产物分别用红外光谱、GPC,粘度法、DSC、X-射线衍射和动态力学谱等方法进行了表征.     

聚苯乙烯-b-聚硅氧烷-b-聚苯乙烯三嵌段共聚物的合成及表征

采用乙烯基封端的聚 (二甲基硅氧烷 )与溴化氢反应制得末端含有C Br的双官能聚 (二甲基硅氧烷 ) ,以此聚 (二甲基硅氧烷 )大分子为引发剂 ,CuCl为催化剂 ,4 ,4′ 二 (5 壬基 ) 2 ,2′ 联吡啶为配体 ,通过原子转移自由基聚合法 ,制得分子量和结构可控的聚苯乙烯 b 聚硅氧烷 b 聚苯乙烯 (PSt b PDMS b PSt)共聚物 .     

SYNTHESIS AND CHARACTERIZATION OF POLY(ASPARTIC ACID) AND ITS DERIVATIVES AS BIODEGRADABLE MATERIALS

ABSTRACT

Three types of modified poly(aspartic acid)s, such as poly(aspartic acid-co-aminocarboxylic acid) (4), alkylamine modified poly(aspartic acid) (5) and crosslinked poly(aspartic acid) (6), were synthesized and calcium-ion chelating ability, hygroscopicity and water absorption were evaluated. The calcium-ion chelating ability of 4 depended on the kind of aminocarboxylic acids and the content of aminocarboxylic acid in the copolymer. The highest value was 3 times higher than that of poly(acrylic acid) with a M_w of 14000. The highly modified PASP, e.g., 50 mol% lauryl amine modified poly(aspartic acid), showed the highest by grogroscopicity among homopoly(aspartic acid)s and modified poly(aspartic acid)s. The maximum swelling of poly(aspartic acid) hydrogel prepared by the γ-irradiation of homopoly(as-partic acid) was 3400 g-deionized water/g-dry hydrogel.     

ANTIMICROBIAL ACTIVITY OF COPOLYMERS OF 2,4-DICHLOROPHENYL ACRYLATE WITH STYRENE:SYNTHESIS,CHARACTERIZATION AND REACTIVITY RATIOS

Some copolymers of 2,4-dichlorophenyl acrylate (2,4-DCPA) with styrene (St) of different teed compositions were prepared by tree radical polymerization technique using 2,2′-azobisisobutyronitrile (AIBN) as an initiator,and the copolymers were characterized by IR spectroscopy.The copolymer composition obtained by UV-spectra led to determination of reactivity ratio by employing Fineman-Ross (F-R) and Kelen-Tudos (K-T) methods.Average molecular weight,as well as intrinsic viscosity,was obtained by vapor pre...     

PNIPAM-b-聚碳酸酯温敏胶束的制备及用作药物控制释放载体的研究

以多孔硅球固定化猪胰脂肪酶(IPPL)为催化剂,温敏性HO-PNIPAM为大分子引发剂,5-甲基-5-烯丙氧羰基-三亚甲基碳酸酯(MAC)和5,5-二甲基三亚甲基碳酸酯(DTC)为共聚单体,通过开环聚合合成了不同结构比例的两亲性嵌段型共聚物P(MAC-co-DTC) -b-PNIPAM.该嵌段型共聚物在水中可自组装形成...