共查询到20条相似文献,搜索用时 500 毫秒
1.
《高科技纤维与应用》2005,30(4):53
一种通气暖垫,包括一垫体、以及埋设于该垫体内的至少一碳纤维电热装置,该垫体具有一设有多数气孔的排气层、以及一与该排气层相间隔的基层,该排气层及该基层间形成一与该各气孔连通的气室,该碳纤维电热装置邻接于该垫体气室。本实用新型具有可选择送风温度、防止电磁辐射,以及高效利用电热装置所发热量的功效。 相似文献
2.
3.
传统的纸质文物档案修复技术,选用的修复材料恢复性能差,导致修复后的纸质文物档案使用寿命偏短,因此分析热熔粘合衬布在纸质文物档案修复中的应用效果。该修复方法通过设置损伤边缘划分曲线,提取纸质文物档案的损伤截面;测试热熔粘合衬布的拉伸性、压缩性和摩擦性,选用恢复性更好的衬布设置修补尺寸;计算热熔粘合衬布与纸质文物档案的融合温度,计算两种材料的融合时间,贴合热熔粘合衬布,实现对破损纸质档案的修复。实验测试表明:与传统的修复材料相比,热熔粘合衬布的恢复性能更强,修复后的文档纸张更具有韧性。由此可见,热熔粘合衬布修复后的纸质文物档案,其存放寿命更长。 相似文献
4.
5.
6.
李晓光 《精细与专用化学品》1995,(10)
德国赫斯公司于1995年4月4~7日在朝阳衬布总厂进行了热熔胶应用技术和衬布生产技术交流。本次技术交流的主要内容包括:热熔胶应用和粘合衬布生产技术理论及生产经 相似文献
7.
8.
9.
10.
11.
Film formation of powder coatings is illuminated from a physico-chemical point of view. Significant parameters influencing
the film formation of powder coatings are surface (wetting) tension and viscosity of the polymer melt formed during the film
formation process. A newly developed measuring device for the investigation of wetting at elevated temperatures is presented.
This device allows systematic investigations of the temperature dependence of the wetting tension of powder coating binder
systems. By combining analytical and surface tension measurements, it is possible to gain new information about the mechanism
of action of additives in these melts.
Hohe Stra?e 6, D-01069 Dresden, Germany. 相似文献
12.
介绍了钢丝帘布压延线上辅机锭子张力装置、电磁吸盘及整经压力辊的设计与应用情况。张力控制装置采用重锤式结构,重锤重量按公式P=F1D2df计算。电磁吸盘装置主要由机架、导辊、轴承、电磁吸盘和电控箱组成,左右两个靠近电磁吸盘的导辊调整的最佳高度是:在运行过程中大部分帘线与磁盘表面平行,只有个别张力值小于电磁吸力的帘线被磁盘吸附在其表面或处于若即若离的状态。整经压力辊装置主要由交叉板、整经辊、压力辊等组成。整经辊的沟槽深度等于帘线直径,压力辊的沟槽深度为帘线直径的一半。一般调整压力辊与3#辊筒的间隙略小于所给的胶片厚度 相似文献
13.
A device constructed to permit the testing of wedge-loaded compact tension specimens of mortar within the sample chamber of an SEM is described. Using this device, the process of cracking was observed in mortar specimens. It was found that the process of crack extension in mortars is very complicated: the crack is tortuous, there is some branch cracking, discontinuities in the cracks are observed, and there is some tearing away of small bits of material in some areas of cracking. The results suggest that the simple fracture mechanics models oversimplify the geometric features of the crack extension process. 相似文献
14.
15.
16.
17.
18.
本文针对多轴纤维缠绕机数控系统,提出了一种集成于运动控制器平台上的纤维缠绕张力控制系统的方案。利用运动控制器的剩余通道,采用张力反馈式控制方式和控制器的计算功能完成了对张力的精密闭环控制。研制了以编码器为反馈元件的新型张力测量装置,实现了基于同一个可编程运动控制器的缠绕机运动控制与张力控制的集成。 相似文献
19.
针对国内长距离带式输送机的应用情况,概要介绍了长距离带式输送机的主要设计环节——整机总体布置、起制动控制要求、动态分析计算;重点总结了其主要部件(包括驱动装置、翻转装置、拉紧装置、清扫装置、滚筒、托辊)的配置方式和要求;并就其启制动控制和防偏措施进行了的归类总结。 相似文献
20.
Surface tension is a parameter of decisive importance for characterizing painted and unpainted surfaces related to wetting and adhesion phenomena. Measurements of the surface tension of solids by means of an automatic contact angle measurement device are presented. The theoretical evaluations provide for a separation of the surface tension into polar and disperse components. In addition, this paper briefly touches on other more far-reaching approaches (acid/base) and discusses a method for the determination of the dynamic surface tension of liquids. 相似文献