Hydrolytic degradation of poly[(R)-3-hydroxybutyric acid] in the melt

Poly[(R)-3-hydroxybutyric acid] [R-P(3HB)] was hydrolyzed in high-temperature and high-pressure water at the temperature range of 180-300 °C and for a period of 360 min. The formation, racemization, and decomposition of 3-hydroxybutyric acids (3HBs) and molecular weight change of R-P(3HB) were investigated. The highest yield of (R)-3-hydroxybutyric acid (R-3HB), ca. 80%, was obtained at 200 °C in the hydrolytic degradation periods of 240-360 min. Too-high hydrolytic degradation temperature such as 300 °C induced the decomposition and racemization of formed 3HBs, resulting in decreased yield of R-3HB. The hydrolytic degradation of R-P(3HB) proceeds homogeneously and randomly via a bulk erosion mechanism. The molecular weight of R-P(3HB) decreased exponentially without formation of low-molecular-weight specific peaks originating from crystalline residues. The hydrolytic degradation rates in the melt estimated from M_n changes were lower for R-P(3HB) than for poly(l-lactide) (PLLA) in the temperature range of 180-220 °C. The activation energy for the hydrolytic degradation (ΔE_h) of R-P(3HB) in the melt (180-250 °C) was 30.0 kcal mol⁻¹, which is higher than 12.2 kcal mol⁻¹ for PLLA in the melt in the temperature range (180-250 °C). This study reveals that hydrolytic degradation of PHB in the melt is an effective and simple method to obtain (R)-3HB and to prepare R-P(3HB) having different molecular weights without containing the specific low-molecular-weight chains, because of the removal of the effect caused by crystalline residues.     

Surface structure of folded-chain crystals of poly(R-3-hydroxybutyrate) of different chain length

The structure of the crystalline-amorphous interface of poly(R-3-hydroxybutyrate) (PHB) of different molar mass is evaluated by analysis of the rigid amorphous fraction and by analysis of the degree of reversible melting and crystallization. The rigid amorphous fraction of low-molar-mass PHB of 5 kDa is only 5-10%, and at best half of that of high-molar-mass PHB of almost 500 kDa, despite identical crystallinity. This result is paralleled by observation of distinctly larger degree of reversible melting and crystallization in PHB of high molar mass. The larger rigid amorphous fraction and higher degree of reversible melting and crystallization in PHB of high molar mass, consistently and independently, prove enhanced covalent coupling of crystals and amorphous structure, and/or de-coupling of segments of macromolecules which traverse between phases, respectively. The distinct isolation of crystals in PHB of low molar mass is discussed in terms of absence of wide loops/folds, long-chain cilia, and tie-molecules.     

Scaling laws and internal structure for characterizing electrospun poly[(R)-3-hydroxybutyrate] fibers

Using chloroform/dimethylformamide (CF/DMF) co-solvent, electrospinning of poly[(R)-3-hydroxybutyrate] (PHB) solutions was carried out at ambient temperature. The effects of the applied voltage (V), flow-rate (Q), and solution viscoelastic properties on the Taylor cone, electrified jet, and fiber morphology were investigated. In addition, the electric field developed by the needle-plate electrode configuration was calculated using a finite element analysis to reveal the tip-to-collector (H) effect. Among the processing parameters (V, Q and H), it was found that Q played a key role in determining the jet diameter (d_j) and electrospun fiber diameter (d_f), and scaling laws existed between them, i.e., d_j-Q^0.61 and d_f-Q^0.33. The diameter reduction ratios of D_o/d_j (D_o is the needle diameter) and d_j/d_f were measured as 50-120 and 5-10, respectively; it suggested that major jet stretching took place in the straight electrified jet region, and further chain orientation could be gained by the subsequent process of jet whipping. By changing PHB concentrations from 5 to 15 wt%, the solution viscosity (η_o) was increased from 100 to 4900 cP, whereas the surface tension and solution conductivity remained unchanged; it provided a good model solution to exclusively reveal the η_o effect on the electrospinning process. Our results showed that the η_o-dependence of d_j and d_f also followed simple scaling laws: d_j-η_o^0.06, and d_f-η_o^0.39, with a prefactor depending on the processing variables, mainly the flow-rate. Regardless of the PHB concentrations used, the obtained PHB fibers showed a similar crystallinity fraction of ca. 0.63 and possession of major α-crystals together with a small amount of β-crystals with zigzag chain conformation.     

Unique orientation textures formed in miscible blends of poly(vinylidene fluoride) and poly[(R)-3-hydroxybutyrate]

The oriented crystallization of poly[(R)-3-hydroxybutyrate] (PHB) in the miscible blends with poly(vinylidene fluoride) (PVDF) was investigated with various compositions. The PVDF/PHB blend films were prepared by solution casting and subsequent melt-quenching in ice water. Oriented films of the blends were prepared by uniaxially stretching the melt-quenched film at 0 °C in ice water using a hand-operated stretching apparatus. The oriented blend films were heat-treated at a fixed length in order to crystallize PHB in the oriented state. The crystal orientation and the lamellar textures of the obtained samples were studied with wide-angle X-ray diffraction (WAXD), and small-angle X-ray scattering (SAXS), respectively. The SAXS measurements showed that a considerable amount of molecular chains of PHB are excluded from the lamellar stacks of PVDF and exist in the interfibrillar regions in the oriented films of the blends. The cold crystallization of PHB in the interfibrillar region results in the orientation of PHB crystals, and the type of crystal orientation depends upon the composition of the blends. For the PVDF/PHB=4/6-7/3 blends, the crystal a-axis of PHB is highly oriented parallel to the drawing direction and the crystal c-axis (molecular chain axis) in PHB crystals is perpendicular to the drawing direction, i.e. orthogonal to the chain axis of the crystals of PVDF. It is considered that the a-axis orientation is induced by the confinement of crystal growth in the interfibrillar nano-domains. For the PVDF/PHB=2/8-3/7 blends, however, the crystal c-axis of PHB is primarily oriented in the drawing direction, suggesting that the stressed molecular chains of PHB are crystallized with the molecular orientation retained.     

Role of intermolecular interaction between hydrophobic blocks in block-selected inclusion complexation of amphiphilic poly(ethylene oxide)-poly[(R)-3-hydroxybutyrate]-poly(ethylene oxide) triblock copolymers with cyclodextrins

The influence of hydrophobic interaction between poly[(R)-3-hydroxybutyrate] blocks on block-selected inclusion complexation between amphiphilic poly(ethylene oxide)-poly[(R)-3-hydroxybutyrate]-poly(ethylene oxide)) (PEO-PHB-PEO) triblock copolymers and α-cyclodextrin (α-CD) or γ-cyclodextrin (γ-CD) was studied by X-ray diffraction, differential scanning calorimetry (DSC), FTIR and ¹H NMR. Due to the stronger hydrophobic interaction at higher temperature, the amphiphilic triblock copolymer tends to aggregate to form tighter core-shell sphere with PHB block in the core and PEO in the corona. Therefore, the CD threaded onto PEO blocks cannot further slide onto the PHB block, which resulted in a highly block-selected inclusion complex formation. Moreover, the DSC results indicated that the triblock copolymer coalesced from its ICs with hot water showed an increase in microphase separation compared with the as-synthesized triblock copolymer, which further supports our hypothesis that CD only selectively includes PEO blocks of the triblock copolymer at higher temperature.     

Segregation morphology of poly(3-hydroxybutyrate)/poly(vinyl acetate) and poly(3-hydroxybutyrate-co-10% 3-hydroxyvalerate)/poly(vinyl acetate) blends as studied via small angle X-ray scattering

Segregation morphology of poly(3-hydroxybutyrate) (PHB)/poly(vinyl acetate) (PVAc) and poly(3-hydroxybutyrate-co-10% 3-hydroxyvalerate) (P(HB-co-10% HV)/PVAc blends crystallized at 70 °C have been investigated by means of small angle X-ray scattering (SAXS). Morphological parameters including the crystal thickness (l_c) and the amorphous layer thickness (l_a) were deduced from the one-dimensional correlation function (γ(z)). Blending with PVAc thickened the PHB crystals but not the P(HB-co-10% HV) crystals. On the basis of the composition variation of l_a, and the volume fraction of lamellar stacks (?_s) revealed that PHB/PVAc blends created the interlamellar segregation morphology when the weight fraction of PVAc (w_PVAc)≤0.2 and the interlamellar and interfibrillar segregation coexisted when w_PVAc>0.2, while P(HB-co-10% HV)/PVAc blends yielded the interfibrillar segregation morphology at all blend compositions. For both PHB/PVAc and P(HB-co-10% HV)/PVAc blends, the distance of PVAc segregation was promoted by increasing PVAc composition and the distance of PVAc segregation in P(HB-co-10% HV)/PVAc blends was greater than in PHB/PVAc at a given PVAc composition. The crystal growth rate played a key role in controlling the segregation of PVAc.     

The domain structure and mobility of semi-crystalline poly(3-hydroxybutyrate) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate): A solid-state NMR study

Solid-state NMR techniques have been employed to investigate the domain structure and mobility of the bacterial biopolymeric metabolites such as poly(3-hydroxybutyrate) (PHB) and its copolymers poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) containing 2.7 mol% (PHBV2.7) and 6.5 mol% (PHBV6.5) 3-hydroxyvalerate. Both single-pulse excitation with magic-angle spinning (SPEMAS) and cross-polarization magic-angle spinning (CPMAS) ¹³C NMR results showed that these biopolymers were composed of amorphous and crystalline regions having distinct molecular dynamics. Under magic-angle spinning, ¹H T_1ρ and ¹³C T₁ showed two processes for each carbon. Proton relaxation-induced spectral editing (PRISE) techniques allowed the neat separation of the ¹³C resonances in the crystalline regions from those in the amorphous ones. The proton spin-lattice relaxation time in the tilted rotating frame, , measured using the Lee-Goldburg sequence with frequency modulation (LGFM) as the spin-locking scheme, was also double exponential and significantly longer than ¹H T_1ρ. The difference between for the amorphous and crystalline domains was greater than that of ¹H T_1ρ. Our results showed that the differences could be exploited in LGFM-CPMAS experiments to separate the signals from two distinct regions. ¹H spin-diffusion results showed that the domain size of the mobile components in PHB, PHBV2.7 and PHBV6.5 were about 13, 24 and 36 nm whereas the ordered domain sizes were smaller than 76, 65 and 55 nm, respectively. The results indicated that the introduction of 3-hydroxyvalerate into PHB led to marked molecular mobility enhancement in the biopolymers.     

Ring-opening homopolymerization and copolymerization of lactones. Part 2. enzymatic degradability of poly(β-hydroxybutyrate) stereoisomers and copolymers of β-butyrolactone with ε-caprolactone and δ-valerolactone

In this study, we have prepared poly([R,S ]-β-hydroxybutyrate) (P([R,S ]-β-HB) or PHB) from [R ,S]-β-butyrolactone ([ R,S]-β-BL), using different aluminoxane catalyst systems (triethylaluminium/water, triisobutylaluminium/water, trioctylaluminium/water and tetraisobutyldialuminoxane/water). By varying the ratio of catalyst to water and using a method of fractionation of polymers, PHB with different isotactic diad fractions (i) (from 0.41 to 0.72) and crystallinities were obtained. Copolymers poly(butyrolactone-co-caprolactone) (P(BL-co-CL)) and poly(butyrolactone-co-valerolactone) (P(BL-co-VL)) have also been synthesized from the ring-opening copolymerization of [ R,S]-β-BL with either ε-caprolactone (CL) or δ-valerolactone (VL) using tetraisobutyldialuminoxane (TIBAO) catalyst. The enzymatic degradability of these polymers was studied in aerobic and anaerobic media. The objective of this work was to determine the influence of the tacticity and crystallinity of the polymers on their degree of biodegradation and on their initial degradation rate. It was shown that the degradation rate measured for bacterial PHB 100% [R] was the highest and the degree of aerobic biodegradation reached after 36 days was around 94%. A 40–50% biodegradation was obtained for synthetic PHB, highly isotactic and predominantly syndiotactic. The non-crystalline and atactic PHB synthesized from TIBAO catalyst had a very high degree of biodegradation of around 88%. This result may suggest that not only are the [R ]-BL units hydrolysed but also the [S ]-BL units. The influence of the crystallinity on the initial degradation rate was observed for the copolymers P(BL-co-CL) and P(BL-co -VL) of various feed ratios. All these copolymers synthesized from TIBAO catalyst, exhibit a high degree of biodegradation of around 85% except for copolymers containing a very high portion of unsubstituted units, CL or VL. The anaerobic biodegradation of PHB and copolymers P(BL-co -CL) is much lower than the aerobic biodegradation, as are the initial rates, even for bacterial P([R ]-HB). © 1999 Society of Chemical Industry     

Molecular dynamics of chiral semi-crystalline poly(R)-(3-hydroxyalkanoates)

The inversion-recovery cross-polarization (IRCP) sequence used for measuring cross-relaxation time (T_CH) is modified to obtain signals that show exponential or spin-lock (SL) decay to zero. The new sequence may, therefore, be analogously abbreviated as SLCP. Poly(R)-(3-hydroxybutyrate-co-3-hydroxyhexanoate) {P(HB-HHx) (85:15)} is found to be more mobile than poly(R)-(3-hydroxybutyrate) {PHB} in the crystalline regions. The molecular-level evidence by solid state nuclear magnetic resonance (NMR) that the P(HB-HHx) chain is more flexible than PHB is echoed by the dynamic frequency sweep measurements of the biopolymer melts, which show that the PHB melt has an unusual rheological response with the dynamic loss moduli dominating the storage moduli at all frequencies. This is most likely to be caused by the local anisotropic melt structures due to the long persistence length of PHB in the melt. Upon cooling the PHB melt to the solid state, such high levels of anisotropy may be frozen into the solid causing lower chain mobility, and hence giving rise to lower toughness. The incorporation of longer side chain unit to the main chain gives rise to a dynamic rheological response in P(HB-HHx) similar to that of an isotropic melt. This is believed to be due to the enhanced chain flexibility, and hence reduced persistence length. This further allows P(HB-HHx) to be processed into a more uniform isotropic morphology, and hence with improved mechanical toughness.     

Synthesis of poly[dimethylsiloxane-block-oligo(ethylene glycol) methyl ether methacrylate]: an amphiphilic copolymer with a comb-like block

AB amphiphilic comb-like block copolymers of poly(oligo[ethylene glycol] methyl ether methacrylate) and polydimethylsiloxane were synthesised with a methodology based on atom transfer radical polymerization (ATRP). The anionic ring opening polymerisation of hexamethylcyclotrisiloxane followed by reaction with 3-(chlorodimethylsilyl) propyl 2-bromo-2-methylpropanoate propyldimethylchlorosilane gave suitable macroinitiators for the ATRP of oligo[ethylene glycol] methyl ether methacrylate. The latter synthetic procedure was optimised by performing a number of syntheses varying the reaction solvent, catalytic complex and the temperature used. Copolymers with relatively high polydispersity indices (M_w/M_n>1.3) could be synthesised at room temperature by employing a Cu(I)Br:N,N,N′,N′,N″-pentamethyldiethylenetriamine complex in n-propanol with Cu(II)Br. The optimum reaction conditions employed a Cu(I)Cl:N-(n-propyl)-2-pyridyl(methanimine) complex with an n-propanol/water mixture or toluene as solvent at 90 °C. This gave block copolymers of the desired molecular weights and polydispersity indices of less than 1.1. The block copolymers were characterised with ¹H NMR and ¹³C NMR spectroscopy and size exclusion chromatography.     

Homo- and R/S-copolymerizations of chiral methylpropargyl esters carrying pyrene moieties, and optical properties of the formed polymers

Pyrene-functionalized chiral methylpropargyl esters, (R)-3-butyn-2-yl-1-pyrenebutyrate [(R)-1], (S)-3-butyn-2-yl-1-pyrenebutyrate [(S)-1], (R)-3-butyn-2-yl-1-pyrenecarboxylate [(R)-2], and 3-butyn-2-yl-1-pyrenecarboxylate [(R,S)-2] were polymerized with (nbd)Rh⁺[η⁶-C₆H₅B⁻(C₆H₅)₃] to obtain the corresponding polymers with moderate molecular weights (M_n: 10?500-66?500) in good yields (82-97%). All the polymers were soluble in CHCl₃, CH₂Cl₂, and THF. The polarimetric and CD spectroscopic data indicated that poly[(R)-1], poly[(S)-1], and poly[(R)-2] existed in a helical structure with predominantly one-handed screw sense in these solvents. The helical structure of poly[(R)-1] and poly[(S)-1] was stable upon heating and addition of MeOH, while that of poly[(R)-2] changed upon MeOH addition. The copolymerization of (R)-1 with (S)-1 was also conducted to obtain the copolymers satisfactorily. Poly[(R)-1], poly[(S)-1], and poly[(R)-2] emitted fluorescence smaller than the corresponding racemic copolymers. The fluorescence intensity was tuned by the addition of MeOH to THF solutions of the polymers.     

Block, blocky gradient and random copolymers of 2-ethylhexyl acrylate and acrylic acid by atom transfer radical polymerization

The controlled synthesis of low-T_g poly(2-ethylhexyl acrylate) (P2EHA) and derived random, block and blocky gradient copolymers via atom transfer radical polymerization (ATRP) is described. After optimizing the reaction conditions for the homopolymerization of 2EHA via ATRP, the synthesis of a variety of copolymers with poly(t-butyl acrylate) (PtBuA) was investigated. First, AB-block copolymers were targeted, starting from P2EHA and PtBuA as macroinitiators. Second, random copolymers of tBuA and 2EHA with different monomer ratios were synthesized. Finally, the synthesis of “blocky” gradient copolymers via a one-pot procedure was investigated, starting with the homopolymerization of tBuA, followed by the addition of 2EHA. The hydrolysis of the PtBuA-segments to poly(acrylic acid) (PAA), which was carried out with methanesulfonic acid, resulted in block, blocky gradient and random copolymers consisting of PAA and P2EHA. Solubility testing of the copolymers in slightly basic water (pH ∼ 9) demonstrated that the gradient structure significantly enhances solubility compared to the block copolymer structures with equal composition. The polymers have been characterized by MALDI-TOF MS, GPC and ¹H NMR.     

Physical and functional characterization of PHASCL membranes

Dense semicrystalline membranes of polyhydroxyalkanoates with medium change length (PHA_SCL), polyhydroxybutyrate (PHB) and poly β (hydroxybutyrate-co-hydroxyvalerate) [P(βHB-co-XβHV)] were characterized using wide-angle X-ray (WAXS) and scanning electron microscopy. PHB membranes showed a more rugged surface than those of copolymers (0-22%HV). Properties such as swelling capacity, vapor permeability and selectivity were investigated. Swelling percentage in water-ethanol mixtures was 34% for PHB as compared to 14% for copolymers membranes. The ethanol/water selectivity (α_s) of PHB was 5.8 which shows that it is more selective than copolymers.The water vapor and ethanol vapor permeability were determined by a gravimetric technique at different temperatures by static and dynamic methods. PHB permeability was 69.5 Barrer at 30 °C and a discreet increment was observed at temperatures (30-50 °C). The difference in permeability between PHB and [P(βHB-co-X%βHV)] could be interpreted in terms of the crystallization rate, crystallite size and distribution which impact to transport properties of amorphous phase.     

Precise preparation of four-arm-poly(ethylene glycol)-block-poly(trimethylene carbonate) star block copolymers via activated monomer mechanism and examination of their solution properties

The polymerization of trimethylene carbonate (TMC) in the presence of HCl·Et₂O via activated monomer mechanism was performed to synthesize 4a-PEG-b-PTMC star block copolymers composed of poly(ethylene glycol) (PEG) and poly(trimethylene carbonate) (PTMC) using four-arm (4a) PEG as an initiator. The TMC conversion and molecular weight of PTMC increased linearly with the polymerization time or the feed ratios of the TMC to 4a-PEG in the presence of HCl·Et₂O in CH₂Cl₂ at 25 °C. The obtained PTMC had molecular weights close to the theoretical value calculated from TMC to PEG molar ratio and exhibited monomodal GPC curve. We prepared successfully 4a-PEG-b-PTMC star block copolymers without metal catalyst at room temperature via living ring-opening polymerization (ROP) of TMC from 4a-PEG as an initiator in the presence of HCl·Et₂O as a monomer activator. The CMCs of the 4a-PEG-b-PTMC star block copolymers determined from fluorescence measurements. The CMCs of the 4a-PEG-b-PTMC star block copolymers decreased in the order of the increase in the PTMC segment. The partition equilibrium constant, K_v, which is an indicator of the hydrophobicity of the micelles of the 4a-PEG-b-PTMC star block copolymers in aqueous media, increased with the increase in the PTMC segment. In conclusion, we confirmed that the 4a-PEG-b-PTMC star block copolymers form micelles and hence may be potential hydrophobic-drug delivery vehicles.     

Intermolecular interactions and crystallization behaviors of biodegradable polymer blends between poly (3-hydroxybutyrate) and cellulose acetate butyrate studied by DSC, FT-IR, and WAXD

Relationships between composition- and temperature-dependent intermolecular interactions and cold crystallization behaviors of poly(3-hydroxybutyrate) (PHB)/ cellulose acetate butyrate (CAB) blends have been investigated mainly by infrared (IR) spectroscopy, together with differential scanning calorimetry, and wide-angle X-ray diffraction (WAXD). Weak intermolecular hydrogen bondings between OH groups in CAB and CO groups in amorphous part of PHB define as inter were detected in OH stretching bands of the blends. These interactions occur in the blends with high CAB content (w_CAB) and highly depend on temperature. For all the blends having 0.2 ≤ w_CAB ≤ 0.7, when temperature is raised (e.g., above 90 °C for the blend with w_CAB = 0.5) the cold crystallization of PHB was discerned, as evidenced by an increase of the absorbance of the band due to CO stretching in the crystal field. The crystallization was found to involve the dissociation of inter and transformation of inter into intramolecular hydrogen bondings within PHB and within CAB as summarized in Table 2 in this text, which promotes the crystallization and enhances stabilization of the crystals. Consequently, the crystallization of the PHB is influenced by exchanges of the hydrogen bondings as described above with raising temperatures. X-ray diffraction from PHB crystals in the blends show a remarkable decrease of crystallinity with w_CAB and eventually disappear when w_CAB ≥ 0.8.     

Colorless polyimides derived from 1S,2S,4R,5R-cyclohexanetetracarboxylic dianhydride,self-orientation behavior during solution casting,and their optoelectronic applications

A novel cycloaliphatic monomer for polyimides (PI), 1S,2S,4R,5R-cyclohexanetetracarboxylic dianhydride (H′-PMDA) is proposed in this work. H′-PMDA shows high polymerizability with various diamines in contrast to its isomer, i.e., conventional hydrogenated pyromellitic dianhydride (H-PMDA) and leads to highly flexible and colorless PI films with very high T_g's. In particular, the combinations with rigid structures of diamines give rise to PIs with significantly decreased coefficients of thermal expansion (CTE) owing to high extents of in-plane chain orientation induced by thermal imidization, whereas the H-PMDA-based counterparts do not. The decreased CTE reflects structural rigidity/linearity of the H′-PMDA-based diimide units as supported by liquid crystallinity observed in the corresponding model compound. Solution casting of a chemically imidized PI derived from H′-PMDA and 2,2′-bis(trifluoromethyl)benzidine (TFMB) results in a lower CTE than that of the thermally imidized counterpart, suggesting the presence of a self-orientation phenomenon during solvent evaporation. The mechanism is proposed in this work. H′-PMDA/TFMB and its copolymer systems can be useful as plastic substrates in image display devices and/or novel coating-type optical compensation films.     

Solid-state NMR study on the structure and mobility of the noncrystalline region of poly(3-hydroxybutyrate) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate)

The noncrystalline structures of poly(3-hydroxybutyrate) (PHB) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) copolymers were studied by variable temperature solid-state wide-line ¹H NMR and solid-state high-resolution ¹³C NMR spectroscopy. It is found that at room temperature there exists a rich and rigid component in the noncrystalline region of PHB and PHBV. The content of this component decreases with the increase in 3-hydroxyvalerate content in PHBV and with the increase in temperature. The brittleness of PHB may be partly attributed to the rigidness of the noncrystalline region at room temperature, while the improvement of the properties of PHBV may come from the enhanced mobility of the noncrystalline region.     

Synthesis of polyether-based block copolymers based on poly(propylene oxide) and terephthalates

Poly(propylene oxide) (PPO) is a low reactive telechelic polyether and the synthesis of high molecular weight poly(propylene oxide)-based block copolymers was studied. The poly(propylene oxide) used was end capped with 20 wt % ethylene oxide and had a molecular weight of 2300 g/mol (ultra-low monol PEO-b-PPO-b-PEO). The type of terephthalic acid based precursors was varied: terephthalic acid, dimethyl terephthalate, diphenyl terephthalate, di(trifluoro ethyl) terephthalate, di(p-nitrophenyl) terephthalate) and terephthalic acid chloride. High molecular weight poly(propylene oxide) based segmented block copolymers were obtained with diphenyl terephthalate (inherent viscosity: 1.6 dl/g).The synthesis of polyether(ester-amide)s comprising PPO and isophthalamide-based segments was also studied by varying the polymerization temperature and time. High molecular weight poly(propylene oxide) block copolymers could be obtained if the reaction was carried out for 2 h at 250 °C under vacuum. Higher temperatures (280 °C) and longer times result in lower inherent viscosities, probably due to degradation of the polyether.     

Synthesis and characterization of diblock,triblock, and multiblock copolymers containing poly(3‐hydroxy butyrate) units

A poly[(R,S)‐3‐hydroxybutyrate] macroinitiator (PHB‐MI) was obtained through the condensation reaction of poly[(R,S)‐3‐hydroxybutyrate] (PHB) oligomers containing dihydroxyl end functionalities with 4,4′‐azobis(4‐cyanopentanoyl chloride). The PHB‐MI obtained in this way had hydroxyl groups at two end of the polymer chain and an internal azo group. The synthesis of ABA‐type PHB‐b‐PMMA block copolymers [where A is poly(methyl methacrylate) (PMMA) and B is PHB] via PHB‐MI was accomplished in two steps. First, multiblock active copolymers with azo groups (PMMA‐PHB‐MI) were prepared through the redox free‐radical polymerization of methyl methacrylate (MMA) with a PHB‐MI/Ce(IV) redox system in aqueous nitric acid at 40°C. Second, PMMA‐PHB‐MI was used in the thermal polymerization of MMA at 60°C to obtain PHB‐b‐PMMA. When styrene (S) was used instead of MMA in the second step, ABCBA‐type PMMA‐b‐PHB‐b‐PS multiblock copolymers [where C is polystyrene (PS)] were obtained. In addition, the direct thermal polymerization of the monomers (MMA or S) via PHB‐MI provided AB‐type diblocks copolymers with MMA and BCB‐type triblock copolymers with S. The macroinitiators and block copolymers were characterized with ultraviolet–visible spectroscopy, nuclear magnetic resonance spectroscopy, gel permeation chromatography, cryoscopic measurements, and thermogravimetric analysis. The increases in the intrinsic viscosity and fractional precipitation confirmed that a block copolymer had been obtained. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 1789–1796, 2004     

Solvent induced morphologies of poly(methyl methacrylate-b-ethylene oxide-b-methyl methacrylate) triblock copolymers synthesized by atom transfer radical polymerization

Poly(methyl methacrylate-b-ethylene oxide-b-methyl methacrylate) (PMMA-PEO-PMMA) triblock copolymers were synthesized using atom transfer radical polymerization (ATRP) and halogen exchange ATRP. PEO-based macroinitiators with molecular weight from M_n = 2000 to 35,800 g/mol were used to initiate the polymerization of MMA to obtain copolymers with molecular weight up to M_n = 82,000 g/mol and polydispersity index (PDI) less than 1.2. The macroinitiators and copolymers were characterized by gel permeation chromatography (GPC) and nuclear magnetic resonance (NMR) spectroscopy. The melting temperature and glass transition temperature of the copolymers were measured by differential scanning calorimetry (DSC). Crystallinities of the PEO blocks were determined from the WAXS patterns of both homopolymers and block copolymers, which revealed the fragmentation of PEO blocks due to the folding of the PMMA chains. Interestingly, the fragmentation was less pronounced when cast on surfaces compared to that in bulk, as measured by GISAXS. Solvent casting was used to control the morphology of the copolymers, permitting the formation of various states including amorphous, induced micellar with a PMMA core and flower-like PEO arms, and a cross-linked gel. Atomic force microscopy (AFM) was used to visualize the different copolymer morphologies, showing micellar and amorphous states.