自激脉冲射流喷嘴参数对装置能耗影响分析

为揭示喷嘴各参数变化对低压大流量自激振荡脉冲射流装置能耗的影响,本文借助数值模拟的方式,对自激振荡脉冲射流喷嘴的能耗问题进行了探讨,根据各结构参数和运行参数变化对腔内速度矢量场、腔内空化区形状即压力场、以及脉冲射流频率影响的分析结果,得到了如下论断:在合适的工况下,上喷嘴入口速度的降低将同比例降低下喷嘴出口的能量输出,上喷嘴压力提高与下喷嘴射流动能的增加成三倍关系.经过与试验结果对照,验证了这一结论,这一结果对于优化设计自激振荡脉冲射流喷嘴,指导自激喷嘴工业化设计具有重要的价值.     

自激脉冲喷嘴装置试验研究

本文对自激脉冲射流喷嘴进行试验设计和数据分析,以自激频率、振幅以及打击力等作为响应函数,研究喷嘴结构与工作压力的配套关系。通过对自激频率和振幅的分析,揭示自激振荡腔内部周期性空化现象及其对自激脉冲形成的影响,从而从解释自激脉冲射流发生机理。根据试验数据,拟合打击力随参数变化的经验公式。最终得出工业应用中典型尺寸范围的自激脉冲喷嘴与自激频率及打击力的关系,为工业设计中的频域调制理论提供了试验数据。     

低压大流量自激脉冲空化射流试验研究EI北大核心CSCD

采用自行设计的自激脉冲空化射流喷嘴和试验测试系统进行了一系列低压大流量空化射流试验,得到了一组喷嘴结构参数,使得喷嘴在入口压力为0.95~1.13 MPa时能产生较为明显的脉冲效果。通过试验获得了随入口压力升高腔室内部流场变化规律,并对试验中喷嘴腔室内部压力突降现象进行分析。试验表明自激脉冲空化射流的打击力是连续射流的1.3~1.6倍。     

低压大流量自激脉冲空化射流试验研究

采用自行设计的自激脉冲空化射流喷嘴和试验测试系统进行了一系列低压大流量空化射流试验,得到了一组喷嘴结构参数,使得喷嘴在入口压力为0.95~1.13 MPa时能产生较为明显的脉冲效果。通过试验获得了随入口压力升高腔室内部流场变化规律,并对试验中喷嘴腔室内部压力突降现象进行分析。试验表明自激脉冲空化射流的打击力是连续射流的1.3~1.6倍。     

脉冲射流作用下驻点压力特性的试验研究

利用自行研制的自激振荡脉冲射流发生装置对脉冲射流垂直冲击靶盘产生的驻点压力进行了试验研究,实测了不同参数下驻点压力的瞬时变化,分析了驻点压力的脉冲特性和沿程变化特性,探讨了喷嘴直径d、喷嘴出口速度V和靶距H对驻点压力的影响,并与相同工况下连续射流的打击力做了比较。试验结果表明,脉冲射流峰值打击力明显高于连续射流,驻点压力峰值持续时间随d增大而增长,同一喷嘴直径下,驻点压力峰值与V成正比,与H成反比。     

两种喷嘴喷射性能的试验研究

为比较自激振荡脉冲喷嘴和连续射流喷嘴的喷射性能,利用自行搭建的喷嘴性能测试装置对两种喷嘴的喷射性能进行了试验研究,实测了不同压力下两种喷嘴的时均喷液量,分析了不同口径的连续射流喷嘴和自激脉冲喷嘴的喷射特性,主要探讨了连续射流喷嘴、自激喷头下喷嘴直径对喷嘴喷液性能的影响,并进行了两种射流打击油泥样本的对比试验．试验结果表明,时均喷液特性相似的连续射流和脉冲射流在冲击油泥样本时,相同时间下脉冲射流的冲击破坏范围要大于连续射流,根据试验中油泥的屈服破坏过程,确定了射流有效打击力的临界值,建立射流清洗油泥时有效射程的经验估算式．     

自激脉冲喷嘴发生机理数值模拟

本文揭示了自激脉冲喷嘴产生自激振荡的根本原因。由于腔内产生了低于汽化压力的负压,引起低压区液体的汽化,加上射流不稳定剪切层的作用,最终形成大小周期性变化的轴对称空化气囊;对脉冲喷嘴腔内流场进行了二维非定常数值模拟,通过对腔内压力和流场的分析,验证了上述结论;试验研究通过对腔内压力的数据采集及对脉冲现象的同步观察,进一步说明了本文结论的正确性。     

矩形高速流场的材料去除特性

为了提高射流抛光的加工效率,设计了一种矩形喷嘴结构,基于并行去除方式来提高工件的去除效率。根据流体力学基本理论,分析了矩形喷嘴冲击射流流场的结构特性,并对其流场分布进行了定量计算。基于射流去除理论,建立了矩形喷嘴的材料去除理论模型,并对去除量分布进行了计算与比较。详细分析了矩形喷嘴结构参数与去除量之间的关系,在此基础上对矩形喷嘴进行了优化,结果表明,矩形喷嘴长宽比控制在10左右能够得到很好的去除效果。     

大气压微波等离子体射流装置放电特性研究

基于同轴传输线结构设计了两种不同喷嘴结构的大气压微波等离子体射流(MW-APPJ)装置,其工作频率2.45 GHz,工作气体为氩气,分别研究了两种不同喷嘴结构对等离子体放电特性产生的影响。仿真结果表明,MW-APPJ在气体喷嘴处会产生高强度的电场,经过优化结构,实现在频率2.45 GHz下,喷嘴处的场强满足氩气电离的击穿场强阈值要求。同时,利用多物理场耦合仿真软件对装置的气流分布进行了稳态模拟,并通过实验对比分析了两种喷嘴结构下大气压氩等离子体射流的基本特性。实验结果表明,不同的喷嘴结构会影响等离子体装置的反射系数随输入功率的变化规律,但并不影响等离子体射流长度随输入功率的变化规律和反射功率随进气流量的变化规律;同时,在大气压下,稳态微波等离子体射流呈现出类金属性,等离子体中的电子只能在很薄的区域中吸收微波能量,因而造成微波的反射功率较大。     

低压大直径喷嘴自激脉冲射流空化模型

为解释低压大直径喷嘴自激脉冲发生机理,本文对空化初生条件进行了讨论,提出一种可适用于高速剪切流的非定常空化模型。认为自激振荡腔内空化或凝结的发生,不仅与当地压力有关,而且与当地速度有关,并根据能量平衡条件,给出了新的空化判别标准。在一定程度上改善了非定常空化模型的收敛性,解决了非定常状态下,由于压力的变化,流体发生周期性相变,即空化和凝结交替发生的数值模拟问题。最后,对低压大直径喷嘴自激脉冲射流进行了数值模拟,并对振荡腔内的压力场、速度场以及相图之间的关系进行了分析。     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Improvement of four-wave mixing-based wavelength conversion efficiency in dispersion shifted fiber by 40-GHz clock pumping

40-GHz clock modulated signal as a pump to improve the efficiency of four-wave mixing (FWM)-based wavelength conversion in a 26.5-km dispersion shifted fiber (DSF) is investigated. The experimental results demonstrate that the conjugated FWM component has higher intensity with the clock pumping than that with the continuous-wave (CW) light pumping. The improvement of FWM-based wavelength conversion efficiency is negligible when the pump power is less than Brillouin threshold. But when the pump power is greater than Brillouin threshold, the improvement becomes significant and increases with the increment of pump power. The improvement can increase up to 9 dB if pump power reaches 17 dBm.     

Characterization of PolyA and PolyC mismatches by Raman spectroscopy

A.C mismatches are studied by Raman spectral characterization of PolyA, PolyC, and their equimolar complex in solution of 0.14 mol/L Na ,pH7.0.Experimental results show that A·C mismatches occur to be A/B (mainly A) conformers, and unlike Watson-Crick base pairing, this kind of mismatches is stabilized by only one hydrogen bond involving cytosine N4H2 and adenine N7.The formation of A·C complex makes the base stacking interactions much stronger, and conformation of the backbone more ordered, which leads to obvious Raman hypochromic effect with some shifts in corresponding bands.