Molecular weight control of polyethylene waxes using a constrained imino‐cyclopenta[b]pyridyl‐nickel catalyst

Five examples of nickel(II) bromide complexes bearing N,N‐imino‐cyclopenta[b ]pyridines, [7‐(ArN)‐6,6‐Me₂C₈H₅N]NiBr₂ (Ar = 2,6‐Me₂C₆H₃ ( Ni1 ), 2,6‐Et₂C₆H₃ ( Ni2 ), 2,6‐i‐ Pr₂C₆H₃ ( Ni3 ), 2,4,6‐Me₃C₆H₂ ( Ni4 ), 2,6‐Et₂‐4‐MeC₆H₂ ( Ni5 )), have been prepared by the reaction of the corresponding ligand, L1 – L5 , with NiBr₂(DME) (DME = 1,2‐dimethoxyethane). On crystallization from bench dichloromethane, Ni1 underwent adventitious reaction with water to give the aqua salt, [ L1 NiBr(OH₂)₃][Br] ( Ni1' ). The molecular structures of Ni1' and Ni3 have been structurally characterized, the latter revealing a bromide‐bridged dimer. On activation with either MMAO or Et₂AlCl, Ni1 , Ni2 , Ni4, and Ni5 , all exhibited high activities for ethylene polymerization (up to 3.88 × 10⁶ g(PE) mol^?1(Ni) h^?1); the most sterically bulky Ni3 gave only low activity. Polyethylene waxes are a feature of the materials obtained which typically display low molecular weights (M _ws), narrow M _w distributions and unsaturated vinyl and vinylene functionalities. Notably, the catalyst comprising Ni1 /Et₂AlCl produced polyethylene with the lowest M _w, 0.67 kg mol^?1, which is less than any previously reported data for any class of cycloalkyl‐fused pyridine–nickel catalyst. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 3494–3505     

Producing highly linear polyethylenes by using t‐butyl‐functionalized 2,6‐bis(imino)pyridylchromium(III) chlorides

A new family of t‐butyl substituted chromium(III) chloride complexes ( Cr1 – Cr6 ), bearing 2‐(1‐(2,6‐dibenzhydryl‐4‐t‐butylphenylimino)ethyl)‐6‐(1‐(arylimino)ethyl)pyridine (aryl = 2,6‐Me₂C₆H₃ Cr1 , 2,6‐Et₂C₆H₃ Cr2 , 2,6‐i‐Pr₂C₆H₃ Cr3 , 2,4,6‐Me₃C₆H₂ Cr4 and 2,6‐Et₂‐4‐MeC₆H₂ Cr5 ) or 2,6‐bis(1‐(2,6‐dibenzhydryl‐4‐t‐butylphenylimino)ethyl)pyridine ( Cr6 ), has been synthesized by the reaction of CrCl₃·6H₂O in good yield with the corresponding ligands ( L1 – L6 ), respectively. The molecular structures of Cr2 and Cr6 were characterized by X‐ray diffraction highlighted a distorted octahedral geometry with the coordinated N,N,N ligand and three bonded chlorides around the metal center. On activation with modified methylaluminoxane or triisobutyl aluminum, most of the chromium precatalysts exhibit good activities toward ethylene polymerization and produce linear polyethylenes with high‐molecular weight. In addition, an in‐depth catalytic evaluation of Cr2 was conducted to investigate how cocatalyst type and amount, reaction temperature, and run time affect the catalytic activities and polymer properties. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 1049–1058     

Balancing high thermal stability with high activity in diaryliminoacenaphthene‐nickel(II) catalysts for ethylene polymerization

The N,N‐diaryliminoacenaphthenes, 1,2‐[2,4‐{(4‐FC₆H₄)₂CH}₂‐6‐MeC₆H₄N]₂‐C₂C₁₀H₆ ( L1 ) and 1‐[2,4‐{(4‐FC₆H₄)₂CH}₂‐6‐MeC₆H₄N]‐2‐(ArN)C₂C₁₀H₆ (Ar = 2,6‐Me₂C₆H₃ L2 , 2,6‐Et₂C₆H₃ L3 , 2,6‐i‐Pr₂C₆H₃ L4 , 2,4,6‐Me₃C₆H₂ L5 , 2,6‐Et₂‐4‐MeC₆H₂ L6 ), incorporating at least one N ?2,4‐bis(difluoro benzhydryl)‐6‐methylphenyl group, have been synthesized and fully characterized. Interaction of L1 – L6 with (DME)NiBr₂ (DME = 1,2‐dimethoxyethane) generates the corresponding nickel(II) bromide N,N‐chelates, L NiBr₂ ( 1 – 6 ), in high yield. The molecular structures of 3 and 6 reveal distorted tetrahedral geometries at nickel with the ortho‐substituted difluorobenzhydryl group providing enhanced steric protection to only one side of the metal center. On activation with various aluminum alkyl co‐catalysts, such as methylaluminoxane (MAO) or Et₂AlCl, 1 – 6 displayed outstanding activity toward ethylene polymerization (up to 1.02 × 10⁷ g of PE (mol of Ni)^?1 h^?1). Notably 1 , bearing equivalent fluorobenzhydryl‐substituted N‐aryl groups, was able in the presence of Et₂AlCl to couple high activity with exceptional thermal stability generating high molecular weight branched polyethylenes at temperatures as high as 100 °C. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 1971–1983     

Moderately branched ultra‐high molecular weight polyethylene by using N,N′‐nickel catalysts adorned with sterically hindered dibenzocycloheptyl groups

Five examples of unsymmetrical 1,2‐bis (arylimino) acenaphthene ( L1 – L5 ), each containing one N‐2,4‐bis (dibenzocycloheptyl)‐6‐methylphenyl group and one sterically and electronically variable N‐aryl group, have been used to prepare the N,N′‐nickel (II) halide complexes, [1‐[2,4‐{(C₁₅H₁₃}₂–6‐MeC₆H₂N]‐2‐(ArN)C₂C₁₀H₆]NiX₂ (X = Br: Ar = 2,6‐Me₂C₆H₃ Ni1 , 2,6‐Et₂C₆H₃ Ni2 , 2,6‐i‐Pr₂C₆H₃ Ni3 , 2,4,6‐Me₃C₆H₂ Ni4 , 2,6‐Et₂–4‐MeC₆H₂ Ni5 ) and (X = Cl: Ar = 2,6‐Me₂C₆H₃ Ni6 , 2,6‐Et₂C₆H₃ Ni7 , 2,6‐i‐Pr₂C₆H₃ Ni8 , 2,4,6‐Me₃C₆H₂ Ni9 , 2,6‐Et₂–4‐MeC₆H₂ Ni10 ), in high yield. The molecular structures Ni3 and Ni7 highlight the extensive steric protection imparted by the ortho‐dibenzocycloheptyl group and the distorted tetrahedral geometry conferred to the nickel center. On activation with either Et₂AlCl or MAO, Ni1 – Ni10 exhibited very high activities for ethylene polymerization with the least bulky Ni1 the most active (up to 1.06  ×  10⁷ g PE mol^?1(Ni) h^?1 with MAO). Notably, these sterically bulky catalysts have a propensity towards generating very high molecular weight polyethylene with moderate levels of branching and narrow dispersities with the most hindered Ni3 and Ni8 affording ultra‐high molecular weight material (up to 1.5  ×  10⁶ g mol^?1). Indeed, both the activity and molecular weights of the resulting polyethylene are among the highest to be reported for this class of unsymmetrical 1,2‐bis (imino)acenaphthene‐nickel catalyst.     

Synthesis of ultra‐high‐molecular‐weight ethylene‐propylene copolymer via quasi‐living copolymerization with N‐heterocyclic carbene ligated vanadium complexes

The quasi‐living copolymerization of ethylene with propylene was achieved by using N‐heterocyclic carbene (NHC) ligated vanadium complex ( V3 , VOCl₃[1,3‐(2,6‐ⁱPr₂C₆H₃)₂(NCH?)₂C:]) due to the stabilization of active center by the introduction of bulky and electron rich NHC ligand with bulky isopropyl substituents at the ortho positions of the phenyl rings. The weight‐average molecular weight (M_w) of the resulting copolymer increases linearly with its weight in 20 min. The ultra‐high‐molecular‐weight (UHMW) ethylene‐propylene copolymer (M_w = 1612 kg mol^?1) can be synthesized with V3 /Et₃Al₂Cl₃ catalytic system. The novel complex V4′ (VCl₃[1,3‐(2,4,6‐Me₃C₆H₂)₂(NCH?)₂C:]·2THF) was constructed by the introduction of two coordinated tetrahydrofuran molecules and decrease in steric hindrance at the ortho positions of phenyl rings. The UHMW ethylene‐propylene copolymer (M_w = 1167 kg mol^?1) can also be synthesized by using V4′ /Et₃Al₂Cl₃ catalytic system. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 553–561     

Efficient ethylene/norbornene copolymerization by half‐titanocenes containing imidazolin‐2‐iminato ligands and MAO catalyst systems

Ethylene copolymerizations with norbornene (NBE) using half‐titanocenes containing imidazolin‐2‐iminato ligands, Cp′TiCl₂[1,3‐R₂(CHN)₂C?N] [Cp′ = Cp ( 1 ), ^tBuC₅H₄ ( 2 ); R = ^tBu ( a ), 2,6‐ⁱPr₂C₆H₃ ( b )], have been explored in the presence of methylaluminoxane (MAO) cocatalyst. Complex 1a exhibited remarkable catalytic activity with better NBE incorporation, affording high‐molecular‐weight copolymers with uniform molecular weight distributions, whereas the tert‐BuC₅H₄ analog ( 2a ) showed low activity, and the resultant polymer prepared by the Cp‐2,6‐diisopropylphenyl analog ( 1b ) possessed broad molecular weight distribution. The microstructure analysis of the poly(ethylene‐co‐NBE)s prepared by 1a suggests the formation of random copolymers including two and three NBE repeating units. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2575–2580     

Judiciously balancing steric and electronic influences on 2,3‐diiminobutane‐based Pd(II) complexes in nourishing polyethylene properties

A new series of palladium complexes ( Pd1–Pd5 ) ligated by symmetrical 2,3‐diiminobutane derivatives, 2,3‐bis[2,6‐bis{bis(4‐FC₆H₄)₂CH}₂‐4‐(alkyl)C₆H₂N]C₄H₆ (alkyl = Me L1 , Et L2 , ⁱ Pr L3 , ^t Bu L4 ) and 2,3‐bis[2,6‐bis{bis(C₆H₅)₂CH}₂‐4‐{(CH₃)₃C}C₆H₂N]C₄H₆ L5 , have been prepared and well characterized, and their catalytic scope toward ethylene polymerization have been investigated. Upon activation with MAO, all palladium complexes ( Pd1–Pd5) exhibited good activities (up to 1.44 × 10⁶ g (PE) mol^?1(Pd) h^?1) and produced higher molecular weight polyethylene in the range of 10⁵ g mol^?1 with precise molecular weight distribution (M _w/M _n = 1.37–1.77). One of the long‐standing limiting features of the Brookhart type α‐diimine Pd(II) catalysts is that they produce highly branched (ca. 100/1000 C atoms) and totally amorphous polymer. Conversely, herein Pd5 produced polymers having dramatically lower branching number (28/1000) as well as improved melting temperature up to 73.1 °C showing well‐controlled linear architecture, and very similar to polyethylene materials generated by early‐transition‐metal based catalysts. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 3214–3222     

Olefin polymerization and copolymerization with soluble transition‐metal complex catalysts

Olefin polymerizations catalyzed by Cp′TiCl₂(O‐2,6‐ⁱPr₂C₆H₃) ( 1 – 5 ; Cp′ = cyclopentadienyl group), RuCl₂(ethylene)(pybox) { 7 ; pybox = 2,6‐bis[(4S)‐4‐isopropyl‐2‐oxazolin‐2‐yl]pyridine}, and FeCl₂(pybox) ( 8 ) were investigated in the presence of a cocatalyst. The Cp*TiCl₂(O‐2,6‐ⁱPr₂C₆H₃) ( 5 )–methylaluminoxane (MAO) catalyst exhibited remarkable catalytic activity for both ethylene and 1‐hexene polymerizations, and the effect of the substituents on the cyclopentadienyl group was an important factor for the catalytic activity. A high level of 1‐hexene incorporation and a lower r_E · r_H value with 5 than with [Me₂Si(C₅Me₄)(N^tBu)]TiCl₂ ( 6 ) were obtained, despite the rather wide bond angle of Cp Ti O (120.5°) of 5 compared with the bond angle of Cp Ti N of 6 (107.6°). The 7 –MAO catalyst exhibited moderate catalytic activity for ethylene homopolymerization and ethylene/1‐hexene copolymerization, and the resultant copolymer incorporated 1‐hexene. The 8 –MAO catalyst also exhibited activity for ethylene polymerization, and an attempted ethylene/1‐hexene copolymerization gave linear polyethylene. The efficient polymerization of a norbornene macromonomer bearing a ring‐opened poly(norbornene) substituent was accomplished by ringopening metathesis polymerization with the well‐defined Mo(CHCMe₂Ph)(N‐2,6‐ⁱPr₂C₆H₃)[OCMe(CF₃)₂]₂ ( 10 ). The key step for the macromonomer synthesis was the exclusive end‐capping of the ring‐opened poly(norbornene) with p‐Me₃SiOC₆H₄CHO, and the use of 10 was effective for this polymerization proceeding with complete conversion. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4613–4626, 2000     

Exceptionally high molecular weight linear polyethylene by using N,N,N′‐Co catalysts appended with a N′‐2,6‐bis{di(4‐fluorophenyl)methyl}‐4‐nitrophenyl group

The bis(arylimino)pyridines, 2‐[CMeN{2,6‐{(4‐FC₆H₄)₂CH}₂–4‐NO₂}]‐6‐(CMeNAr)C₅H₃N (Ar = 2,6‐Me₂C₆H₃ L1 , 2,6‐Et₂C₆H₃ L2 , 2,6‐i‐Pr₂C₆H₃ L3 , 2,4,6‐Me₃C₆H₂ L4 , 2,6‐Et₂–4‐MeC₆H₂ L5 ), each containing one N′‐2,6‐bis{di(4‐fluorophenyl)methyl}‐4‐nitrophenyl group, have been synthesized by two successive condensation reactions from 2,6‐diacetylpyridine. Their subsequent treatment with anhydrous cobalt (II) chloride gave the corresponding N,N,N′‐CoCl₂ chelates, Co1 – Co5 , in excellent yield. All five complexes have been characterized by ¹H/¹⁹F NMR and IR spectroscopy as well as by elemental analysis. In addition, the molecular structures of Co1 and Co3 have been determined and help to emphasize the differences in steric properties imposed by the inequivalent N‐aryl groups; distorted square pyramidal geometries are adopted by each complex. Upon activation with either methylaluminoxane (MAO) or modified methylaluminoxane (MMAO), precatalyts Co1 – Co5 collectively exhibited very high activities for ethylene polymerization with 2,6‐dimethyl‐substituted Co1 the most active (up to 1.1 × 10⁷ g (PE) mol^?1 (Co) h^?1); the MAO systems were generally more productive. Linear polyethylenes of exceptionally high molecular weight (M_w up to 1.3 × 10⁶ g mol^?1) were obtained in all cases with the range in dispersities exhibited using MAO as co‐catalyst noticeably narrower than with MMAO [M_w/M_n: 3.55–4.77 ( Co1 – Co5 /MAO) vs. 2.85–12.85 ( Co1 – Co5 /MMAO)]. Significantly, the molecular weights of the polymers generated using this class of cobalt catalyst are higher than any literature values reported to date using related N,N,N‐bis (arylimino)pyridine‐cobalt catalysts.     

Introduction of reactive functionality by the incorporation of divinylbiphenyl in ethylene copolymerization with styrene or 1‐hexene using aryloxo‐modified half‐titanocenes and MAO catalysts

An efficient introduction of vinyl group into poly (ethylene‐co‐styrene) or poly(ethylene‐co?1‐hexene) has been achieved by the incorporation of 3,3′‐divinylbiphenyl (DVBP) in terpolymerization of ethylene, styrene, or 1‐hexene with DVBP using aryloxo‐modified half‐titanocenes, Cp′TiCl₂(O?2,6‐ⁱPr₂C₆H₃) [Cp′ = Cp*, ^tBuC₅H₄, 1,2,4‐Me₃C₅H₂], in the presence of MAO cocatalyst, affording high‐molecular‐weight polymers with unimodal distributions. Efficient comonomer incorporations have been achieved by these catalysts, and the content of each comonomer could be varied by its initial concentration charged. The postpolymerization of styrene was initiated from the vinyl group remained in the side chain by treatment with n‐BuLi. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2581–2587     

Unique catalytic behavior of chromium complexes having halogenated bis(imino)pyridine ligands for ethylene polymerization

Reactions of CrCl₃(thf)₃ with bis(imino)pyridines gave a series of {bis(imino)pyridine}chromium(III) trichloride complexes, {2,6‐(RN?CMe)₂C₅H₃N}CrCl₃ [R = C₆HPr₂‐2,6 ( 1 ), C₆H₃Et₂‐2,6 ( 2 ), C₆H₃Me₂‐2,6 ( 3 ), C₆H₂Me₃‐2,4,6 ( 4 ), C₆H₃Me₂‐3,5 ( 5 ), C₆H₅ ( 6 ), cyclohexyl ( 7 ), 2‐methyl‐1‐naphthyl ( 8 ), C₆H₃F₂‐2,6 ( 9 ), C₆H₃Br₂‐2,6 ( 10 ), C₆F₅ ( 11 )]. Pseudo‐octahedral geometries of 6 , 10 , and 11 were revealed by X‐ray crystallography. The complexes having bulky substituents such as 1 – 4 showed high activity for ethylene polymerization in combination with modified methylaluminoxane (MMAO) to give linear polyethylenes. In sharp contrast, the pentafluorophenyl complex 11 /modified methylaluminoxane system was found to be moderately active for ethylene homopolymerization to give moderately branched polyethylene with only ethyl branches. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3368–3375, 2005     

Co‐catalyst effects on the thermal stability/activity of N,N,N‐Co ethylene polymerization Catalysts Bearing Fluoro‐Substituted N‐2,6‐dibenzhydrylphenyl groups

The unsymmetrical bis (arylimino)pyridines, 2‐[CMeN{2,6‐{(4‐FC₆H₄)₂CH}₂–4‐t‐BuC₆H₂}]‐6‐(CMeNAr)C₅H₃N (Ar = 2,6‐Me₂C₆H₃ L1 , 2,6‐Et₂C₆H₃ L2 , 2,6‐i‐Pr₂C₆H₃ L3 , 2,4,6‐Me₃C₆H₂ L4 , 2,6‐Et₂–4‐MeC₆H₂ L5 ), each containing one N‐aryl group bedecked with ortho‐substituted fluorobenzhydryl groups, have been employed in the preparation of the corresponding five‐coordinate cobalt (II) chelates, LCoCl₂ ( Co1 – Co5 ); the symmetrical comparator [2,6‐{CMeN(2,6‐(4‐FC₆H₄)₂CH)₂–4‐t‐BuC₆H₂}₂C₅H₃N]CoCl₂ (Co6) is also reported. All cobaltous complexes are paramagnetic and have been characterized by ¹H/¹⁹F NMR spectroscopy, FT‐IR spectroscopy and elemental analysis. The molecular structures of Co3 and Co6 highlight the different degrees of steric protection given to the metal center by the particular N‐aryl group combination. Depending on the aluminoxane co‐catalyst employed to activate the cobalt precatalyst, distinct variations in thermal stability and activity of the catalyst towards ethylene polymerization were exhibited. In particular with MAO, the resultant catalysts reached their optimal performance at 70 °C delivering high activities of up to 10.1 × 10⁶ g PE (mol of Co)^?1 h^?1 with Co1  >  Co4  >  Co2  >  Co5  >  Co3 >>  Co6 . On the other hand, using MMAO, the catalysts operate most effectively at 30 °C but are by comparison less productive. In general, the polyethylenes were highly linear, narrowly disperse and displayed a wide range of molecular weights [M_w range: 18.5–58.7 kg mol^?1 (MAO); 206.1–352.5 kg mol^?1 (MMAO)].     

Factors affecting product distributions in ethylene/styrene copolymerization by (aryloxo)(cyclopentadienyl)titanium complexes‐MAO catalyst systems

Ethylene/styrene copolymerizations using Cp′TiCl₂(O‐2,6‐ⁱPr₂C₆H₃) [Cp′ = Cp* (C₅Me₅, 1 ), 1,2,4‐Me₃C₅H₂ ( 2 ), tert‐BuC₅H₄ ( 3 )]‐MAO catalyst systems were explored under various conditions. Complexes 2 and 3 exhibited both high catalytic activities (activity: 504–6810 kg‐polymer/mol‐Ti h) and efficient styrene incorporations at 25, 40°C (ethylene 6 atm), affording relatively high molecular weight poly (ethylene‐co‐styrene)s with unimodal molecular weight distributions as well as with uniform styrene distributions (M_w = 6.12–13.6 × 10⁴, M_w/M_n = 1.50–1.71, styrene 31.7–51.9 mol %). By‐productions of syndiotactic polystyrene (SPS) were observed, when the copolymerizations by 1 – 3 ‐MAO catalyst systems were performed at 55, 70 °C (ethylene 6 atm, SPS 9.0–68.9 wt %); the ratios of the copolymer/SPS were affected by the polymerization temperature, the [styrene]/[ethylene] feed molar ratios in the reaction mixture, and by both the cyclopentadienyl fragment (Cp′) and anionic ancillary donor ligand (L) in Cp′TiCl₂(L) (L = Cl, O‐2,6‐ⁱPr₂C₆H₃ or N=C^tBu₂) employed. Co‐presence of the catalytically‐active species for both the copolymerization and the homopolymerization was thus suggested even in the presence of ethylene; the ratios were influenced by various factors (catalyst precursors, temperature, styrene/ethylene feed molar ratio, etc.). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4162–4174, 2008     

Novel cyclohexyl‐substituted salicylaldiminato–nickel(II) complex as a catalyst for ethylene homopolymerization and copolymerization

The cyclohexyl‐substituted salicylaldiminato–Ni(II) complex [O? (3‐C₆H₁₁)(5‐CH₃)C₆H₂CH?N‐2,6‐C₆H₃ⁱPr₂]Ni(PPh₃)(Ph) ( 4 ) has been synthesized and characterized with ¹H NMR and X‐ray structure analysis. In the presence of phosphine scavengers such as bis(1,5‐cyclooctadiene)nickel(0) [Ni(COD)₂], triisobutylaluminum (TIBA), and triethylaluminum (TEA), 4 is an active catalyst for ethylene polymerization and copolymerization with the polar monomers tert‐butyl‐10‐undecenoate, methyl‐10‐undecenoate, and 4‐penten‐1‐ol under mild conditions. The polymerization parameters affecting the catalytic activity and viscosity‐average molecular weight of polyethylene, such as the temperature, time, ethylene pressure, and catalyst concentration, are discussed. A polymerization activity of 3.62 × 10⁵ g of PE (mol of Ni h)^?1 and a weight‐average molecular weight of polyethylene of 5.73 × 10⁴ g^.mol^?1 have been found for 10 μmol of 4 and a Ni(COD)₂/ 4 ratio of 3 in a 30‐mL toluene solution at 45 °C and 12 × 10⁵ Pa of ethylene for 20 min. The polydispersity index of the resulting polyethylene is about 2.04. After the addition of tetrahydrofuran and Et₂O to the reaction system, 4 exhibits still high activity for ethylene polymerization. Methyl‐10‐undecenoate (0.65 mol %), 0.74 mol % tert‐butyl‐10‐undecenoate, and 0.98 mol % 4‐penten‐1‐ol have been incorporated into the polymer. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6071–6080, 2004     

Pincer‐Type Heck Catalysts and Mechanisms Based on PdIV Intermediates: A Computational Study

Pincer‐type palladium complexes are among the most active Heck catalysts. Due to their exceptionally high thermal stability and the fact that they contain Pd^II centers, controversial Pd^II/Pd^IV cycles have been often proposed as potential catalytic mechanisms. However, pincer‐type Pd^IV intermediates have never been experimentally observed, and computational studies to support the proposed Pd^II/Pd^IV mechanisms with pincer‐type catalysts have never been carried out. In this computational study the feasibility of potential catalytic cycles involving Pd^IV intermediates was explored. Density functional calculations were performed on experimentally applied aminophosphine‐, phosphine‐, and phosphite‐based pincer‐type Heck catalysts with styrene and phenyl bromide as substrates and (E)‐stilbene as coupling product. The potential‐energy surfaces were calculated in dimethylformamide (DMF) as solvent and demonstrate that Pd^II/Pd^IV mechanisms are thermally accessible and thus a true alternative to formation of palladium nanoparticles. Initial reaction steps of the lowest energy path of the catalytic cycle of the Heck reaction include dissociation of the chloride ligands from the neutral pincer complexes [{2,6‐C₆H₃(XPR₂)₂}Pd(Cl)] [X=NH, R=piperidinyl ( 1 a ); X=O, R=piperidinyl ( 1 b ); X=O, R=iPr ( 1 c ); X=CH₂, R=iPr ( 1 d )] to yield cationic, three‐coordinate, T‐shaped 14e^? palladium intermediates of type [{2,6‐C₆H₃(XPR₂)₂}Pd]⁺ ( 2 ). An alternative reaction path to generate complexes of type 2 (relevant for electron‐poor pincer complexes) includes initial coordination of styrene to 1 to yield styrene adducts [{2,6‐C₆H₃(XPR₂)₂}Pd(Cl)(CH₂?CHPh)] ( 4 ) and consecutive dissociation of the chloride ligand to yield cationic square‐planar styrene complexes [{2,6‐C₆H₃(XPR₂)₂}Pd(CH₂?CHPh)]⁺ ( 6 ) and styrene. Cationic styrene adducts of type 6 were additionally found to be the resting states of the catalytic reaction. However, oxidative addition of phenyl bromide to 2 result in pentacoordinate Pd^IV complexes of type [{2,6‐C₆H₃(XPR₂)₂}Pd(Br)(C₆H₅)]⁺ ( 11 ), which subsequently coordinate styrene (in trans position relative to the phenyl unit of the pincer cores) to yield hexacoordinate phenyl styrene complexes [{2,6‐C₆H₃(XPR₂)₂}Pd(Br)(C₆H₅)(CH₂?CHPh)]⁺ ( 12 ). Migration of the phenyl ligand to the olefinic bond gives cationic, pentacoordinate phenylethenyl complexes [{2,6‐C₆H₃(XPR₂)₂}Pd(Br)(CHPhCH₂Ph)]⁺ ( 13 ). Subsequent β‐hydride elimination induces direct HBr liberation to yield cationic, square‐planar (E)‐stilbene complexes with general formula [{2,6‐C₆H₃(XPR₂)₂}Pd(CHPh?CHPh)]⁺ ( 14 ). Subsequent liberation of (E)‐stilbene closes the catalytic cycle.     

Palladium(II) complexes of Y,C,Y‐chelated phosphines: synthesis,structure, and catalytic activity in Suzuki–Miyaura reaction

The phosphines L¹PPh₂ (1) and L²PPh₂ (2) containing different Y,C,Y‐chelating ligands, L¹ = 2,6‐(^tBuOCH₂)₂C₆H₃^? and L² = 2,6‐(Me₂NCH₂)₂C₆H₃^?, were treated with PdCl₂ and di‐µ‐chloro‐bis[2‐[(N,N‐dimethylamino)methyl]phenyl‐C,N]‐dipalladium(II) and yielded complexes trans‐{[2,6‐(^tBuOCH₂)₂C₆H₃]PPh₂}₂PdCl₂ (3), {[2,6‐(Me₂NCH₂)₂C₆H₃]PPh₂} PdCl₂ (4), {[2,6‐(^tBuOCH₂)₂C₆H₃]PPh₂}Pd(Cl)[2‐(Me₂NCH₂)C₆H₄] (5) and {[2,6‐(Me₂NCH₂)₂C₆H₃]PPh₂}Pd(Cl)[2‐(Me₂NCH₂)C₆H₄] (6) as the result of different ability of starting phosphines 1 and 2 to complex PdCl₂. Compounds 3–6 were characterized by ¹H, ¹³C, ³¹P NMR spectroscopy and ESI‐MS. The molecular structures of 3,4 and 6 were also determined by X‐ray diffraction analysis. The catalytic activity of complexes 3–6 was evaluated in the Suzuki‐Miyaura cross‐coupling reaction. Copyright © 2010 John Wiley & Sons, Ltd.     

Bulky iminophosphine-based nickel and palladium catalysts bearing 2,6-dibenzhydryl groups for ethylene oligo-/polymerization

A series of 2,6-dibenzhydryl substituted bulky Ni and Pd complexes containing P,N-chelating ligands, {[2,6-(Ph₂CH)₂-4-R-C₆H₂-N=CH-C₆H₄-2-PPh₂]MX₂; MX₂ =NiBr₂; R = Me ( Ni1 ); R = F ( Ni2 ); MX₂ =PdCl₂, R = Me ( Pd1 )}, have been prepared and used as catalyst precursors for ethylene oligo-/polymerization. Compared to the corresponding 2,6-diisopropyl Ni catalyst, these bulky Ni precatalysts activated by Et₂AlCl exhibited excellent catalytic performance toward ethylene polymerization with activity of up to 1.90 × 10⁵ g PE (mol Ni)⁻¹ h⁻¹, and result in semicrystalline PEs with high molecular weight. The catalytic performance of these bulky P,N-type complexes was significantly improved by introducing two ortho-dibenzhydryl on the N-aryl substituents. However, the formation of C₁₀–C₂₄ oligomers were generated using their palladium catalysts through ethylene oligomerization at high temperatures.     

Olefin polymerization catalyzed by amide vanadium(IV) complexes: The stereo‐ and regiochemistry of propylene insertion

The reaction of VCl₃(THF)₃ with 1 equiv of the lithium salt of ligand ArNH(Me₂SiCH₂CH₂SiMe₂)NHAr or ArNH(SiMe₃) (Ar = 2,6‐Me₂C₆H₃) afforded the corresponding V(IV) amide complexes, [1,2‐CH₂CH₂(Me₂SiNAr)₂]VCl₂ ( 3 ) and (Me₃SiNAr)₂VCl₂ ( 4 ). The activation of 3 and 4 with the alkyl aluminum compound Al₂Et₃Cl₃ or AlEt₂Cl produced active ethylene polymerization catalysts exhibiting productivity values among the highest reported for vanadium amide based catalysts. Moreover, syndiotactic specific propylene polymerization was successfully conducted at ?40 °C in the presence of 3 /Al₂Et₃Cl₃ and 4 /Al₂Et₃Cl₃. Syndiotactic polypropylenes with moderate stereoregularity ([rr] = 0.66) and a concentration of regioirregular propylene of 6.9 mol % were obtained. Monomodal molecular weight distributions and polydispersity indices lower than 2 were observed in the polymerization runs carried out in heptane solutions. Thus, ethylene–propylene copolymers with propylene concentrations up to 45 mol % were synthesized and characterized by ¹³C NMR and thermal analysis. Good alternation and random distribution of the two monomers were actually obtained. Samples with elevated concentrations of propylene were completely amorphous, with a glass‐transition temperature of ?50 °C. The properties and structure of the copolymers produced with amide vanadium catalysts 3 and 4 were similar to those reported for ethylene–propylenes produced with industrial vanadium‐based catalysts, suggesting the presence of the same active catalyst species. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3279–3289, 2006     

Conversion of iminoacyl quinolinylpalladium (II) complexes into novel oxo‐pyrrolo[3,4‐b] quinolines via depalladation reactions

Oxidative addition reactions of quinolines 1a , b with Pd(dba)₂ in the presence of PPh₃ (1:2) in acetone gave dinuclear palladium complexes [Pd(C,N‐2‐C₉ H₄N‐CHO‐3‐R‐6)Cl(PPh₃)]₂ [(R = H ( 2a ), R = OMe ( 2b ), which were reacted with isocyanide XyNC (Xy = 2,6‐Me₂C₆H₃) to give novel iminoacyl quinolinylpalladium complexes 3a , b in good yields (81 and 77%). Cyclopalladated complexes 3a , b were also obtained in low yields (39 and 33.5%) via one‐pot reaction of 1a , b with isonitrile XyNC:Pd(dba)₂ (4:1). The reaction of 3a , b with Tl(TfO) (TfO = triflate, CF₃SO₃) in the presence of H₂O or EtOH causes depalladation reactions of complexes to provide the corresponding organic compounds 4a , b , 5a , b and 6a , b in yields of 41, 27 and 18 ? 19%, respectively. The products were characterized by satisfactory elemental analyses and spectral studies (IR, ¹H, ¹³C and ³¹P NMR). The crystal structures 2a , 3a and 3b were determined by X‐ray diffraction studies. Copyright © 2008 John Wiley & Sons, Ltd.     

Stable N‐Heterocyclic Carbene Adducts of Arylchlorosilylenes and Their Germanium Homologues

The first N‐heterocyclic carbene adducts of arylchlorosilylenes are reported and compared with the homologous germanium compounds. The arylsilicon(II) chlorides SiArCl(Im‐Me₄) [Ar=C₆H₃‐2,6‐Mes₂ (Mes=C₆H₂‐2,4,6‐Me₃), C₆H₃‐2,6‐Trip₂ (Trip=C₆H₂‐2,4,6‐iPr₃)] were obtained selectively on dehydrochlorination of the arylchlorosilanes SiArHCl₂ with 1,3,4,5‐tetramethylimidazol‐2‐ylidene (Im‐Me₄). The analogous arylgermanium(II) chlorides GeArCl(Im‐Me₄) were prepared by metathetical exchange of GeCl₂(Im‐Me₄) with LiC₆H₃‐2,6‐Mes₂ or addition of Im‐Me₄ to GeCl(C₆H₃‐2,6‐Trip₂). All compounds were fully characterized. Density functional calculations on ECl(C₆H₃‐2,6‐Trip₂)(Im‐Me₄), where E=Si, Ge, at different levels of theory show very good agreement between calculated and experimental bonding parameters, and NBO analyses reveal similar electronic structures of the two aryltetrel(II) chlorides. The low gas‐phase Gibbs free energy of bond dissociation of SiCl(C₆H₃‐2,6‐Trip₂)(Im‐Me₄) (Δ${G{{{\circ}\hfill \atop {\rm calcd}\hfill}}}$ =28.1 kJ mol^?1) suggests that the carbene adducts SiArCl(Im‐Me₄) may be valuable transfer reagents of the arylsilicon(II) chlorides SiArCl.