Histological assessment of follicular delivery of flutamide by solid lipid nanoparticles: potential tool for the treatment of androgenic alopecia

Abstract

Context: Flutamide is a potent anti-androgen with the several unwanted side effects in systemic administration, therefore, it has attracted special interest in the development of topically applied formulations for the treatment of androgenic alopecia.

Objective: The purpose of this study was to prepare and characterize the solid lipid nanoparticles (SLNs) of Flutamide for follicular targeting in the treatment of the androgenic alopecia.

Methods: Flutamide-loaded SLNs, promising drug carriers for topical application were prepared by hot melt homogenization method. Drug permeation and accumulation in the exercised rat skin and histological study on the male hamsters were performed to assess drug delivery efficiency in vitro and in vivo, respectively.

Results: The optimized Flutamide-loaded SLNs (size 198?nm, encapsulation efficiency percentage 65% and loading efficiency percentage 3.27%) exhibited a good stability during the period of at least 2 months. The results of X-ray diffraction showed Flutamide amorphous state confirming uniform drug dispersion in the SLNs structure. Higher skin drug deposition (1.75 times) of SLN formulation compared to Flutamide hydroalcoholic solution represented better localization of the drug in the skin. The in vivo studies showed more new hair follicle growth by utilizing Flutamide-loaded SLNs than Flutamide hydroalcoholic solution which could be due to the higher accumulation of SLNs in the hair follicles as well as slowly and continues release of the Flutamide through the SLNs maximizing hair follicle exposure by antiandrogenic drug.

Conclusion: It was concluded Flutamide-loaded SLN formulation can be used as a promising colloidal drug carriers for topical administration of Flutamide in the treatment of androgenic alopecia.     

Characterization and Body Distribution of β-Elemene Solid Lipid Nanoparticles (SLN)

ABSTRACT

Solid lipid nanoparticles (SLN) containing β-elemene, a volatile oil used for the treatment of cancer, were prepared by the method combining probe sonication and membrane extrusion. Effects of the formulations and procedures on the characteristics of SLN were investigated. Body distribution of β-elemene SLN in rats after intravenous administration was compared with that of the commercial emulsion. The results showed that dispersing the surfactant in the melted lipid matrix could obtain smaller particles than that dispersing in the water phase. Increasing the ratio of monostearin in the lipid matrix or the concentration of surfactant reduced the mean volume size of the SLN. Optimized formulation was composed of monostearin and precirol ATO 5 at a mass ratio of 3:7, which was quite stable for 8 months at room temperature. In vitro release of β-elemene from the SLN was slow and stable without obvious burst release and was found to follow the Higuich equation. After intravenous administration, the β-elemene levels after 5 min injection of SLN formulation were 1.5, 2.9, and 1.4 times higher than those of β-elemene emulsion in liver, spleen, and kidney, respectively, while the concentrations of β-elemene were decreased 30% in heart and lung. Therefore, the SLN containing β-elemene might be an attractive candidate for the treatment of liver cancer.     

Histopathological evaluation of caffeine-loaded solid lipid nanoparticles in efficient treatment of cellulite

Context: Cellulite refers to dimpled appearance of the skin, usually located in the thighs and buttocks regions of most adult women.

Objective: The aim of this study was to formulate topically used caffeine-loaded solid lipid nanoparticle (SLN) for the treatment of cellulite.

Methods: SLNs were prepared by hot homogenization technique using Precirol® as lipid phase. The physical characterization and stability studies of SLNs as well as in vitro skin permeation and histological studies in rat skin were conducted.

Results: The mean particle size, encapsulation efficiency and loading efficiency percentages for optimized SLN formulation were 94?nm, 86 and 28%, respectively. In vitro drug release demonstrated that caffeine-loaded SLN incorporated into carbopol made hydrogel (caffeine-SLN-hydrogel) exhibited a sustained drug release compared to the caffeine hydrogel over 24?h. Caffeine-loaded SLNs showed a good stability during 12 months of storage at room temperature. The DSC and XRD results showed that caffeine was dispersed in SLN in an amorphous state. In vitro permeation studies illustrated higher drug accumulation in the skin with caffeine-SLN-hydrogel compared to caffeine hydrogel. The flux value of caffeine through rat skin in caffeine-SLN-hydrogel was 3.3 times less than caffeine hydrogel, representing lower systemic absorption. In contrast with caffeine hydrogel, the histological studies showed the complete lysis of adipocytes by administration of caffeine-SLN-hydrogel in the deeper skin layers.

Conclusion: Results of this study indicated that SLNs are promising carrier for improvement of caffeine efficiency in the treatment of cellulite following topical application on the skin.     

Formulation design and optimization of novel soft glycerosomes for enhanced topical delivery of celecoxib and cupferron by Box–Behnken statistical design

Background: The present study describes glycerosomes (vesicles composed of phospholipids, glycerol and water) as a novel drug delivery system for topical application of celecoxib (CLX) and cupferron (CUP) compound.

Aim: The goal of this research was to design topical soft innovative vesicles loaded with CLX or CUP for enhancing the efficacy and avoiding systemic toxicity of CLX and CUP.

Methods: CLX and CUP loaded glycerosomes were prepared by hydrating phospholipid-cholesterol films with glycerol aqueous solutions (20–40%, v/v). Box–Behnken design, using Design-Expert® software, was the optimum choice to statistically optimize formulation variables. Three independent variables were evaluated: phospholipid concentration (X₁), glycerol percent (X₂) and tween 80 concentration (X₃). The glycerosomes particle size (Y₁), encapsulation efficiency percent (Y₂: EE %) and drug release (Y₃) were selected as dependent variables. The anti-inflammatory effect of CLX and CUP glycerosomal gel was evaluated by carrageenan-induced rat paw edema method followed by histopathological studies.

Results: The optimized formulations (CLX2* and CUP1*) showed spherical morphology under transmission electron microscopy, optimum particle size of 195.4?±?3.67?nm, 301.2?±?1.75?nm, high EE of 89.66?±?1.73%, 93.56?±?2.87%, high drug release of 47.08?±?3.37%, 37.60?±?1.89% and high cumulative amount of drug permeated in 8?h of 900.18?±?50.24, 527.99?±?34.90?µg.cm^?2 through hairless rat skin, respectively. They also achieved significant remarkable paw edema inhibition in comparison with the control group (p? Conclusion: Finally, the administration of CLX2* and CUP1* loaded glycerosomal gel onto the skin resulted in marked reduction of edema, congestive capillary and inflammatory cells and this approach may be of value in the treatment of different inflammatory disorders.     

Developing combination of artesunate with paclitaxel loaded into poly-d,l-lactic-co-glycolic acid nanoparticle for systemic delivery to exhibit synergic chemotherapeutic response

Objectives: Paclitaxel (PTX) has been indicated for the treatment of a variety of solid tumors, whereas artesunate (ART) has been reported to have the potential for use in combination chemotherapy. In this study, the combination of ART and PTX was prepared in nanoparticle to induce the synergic effect and improve therapeutic efficiency in treatment of breast cancer.

Methods: Dual anticancer agents (PTX and ART) were loaded into Poly-D,L-lactic-co-glycolic acid (PLGA) nanoparticle (NP) by solvent evaporation technique from oil-in-water emulsion, stabilized with Tween 80. Physicochemical properties of obtained nanoparticles (PTX-ART-NPs) were characterized including particle size (Z), polydispersity index (PDI), zeta potentials (ZP), encapsulation efficiency (EE), and in-vitro drug release. Combination index (CI) was calculated to determine the synergic effect of the combination and select the best ratio of ART and PTX. The final NPs analyzed intracellular uptake, cytotoxicity assay, and apoptosis study.

Results: The final NP had a small size (around 120?nm) with a narrow size distribution (PDI <0.3). EE values for each drug were 87.8?±?1.1% and 99.5?±?0.1% for ART and PTX, respectively, and drugs were released from NPs in a controlled release pattern. All combinations of PTX and ART had CI values under 1, which confirmed the synergic effects. Meanwhile, NP preparation increased cytotoxicity on three breast cancer cell-lines comparable to free drugs.

Conclusions: Combination of ART- and PTX-loaded PLGA NP showed promising results for anticancer therapy, especially for breast cancer treatment.     

Lipid nanoparticles of zaleplon for improved oral delivery by Box–Behnken design: optimization,in vitro and in vivo evaluation

Purpose: Zaleplon (ZL) is a hypnotic drug prescribed for the management of insomnia and convulsions. The oral bioavailability of ZL was low (～30%) owing to poor water solubility and hepatic first-pass metabolism. The cornerstone of this investigation is to develop and optimize solid lipid nanoparticles (SLNs) of ZL with the aid of Box–Behnken design (BBD) to improve the oral bioavailability.

Methods: A design space with three formulation variables at three levels were evaluated in BBD. Amount of lipid (A₁), amount of surfactant (A₂) and concentration of co-surfactant (%) (A₃) were selected as independent variables, whereas, particle size (B₁), entrapment efficiency (B₂) and zeta potential (ZP, B₃) as responses. ZL-SLNs were prepared by hot homogenization with ultrasonication method and evaluated for responses to obtain optimized formulation. Morphology of nanoparticles was observed under SEM. DSC and XRD studies were examined to understand the native crystalline behavior of drug in SLN formulations. Further, in vivo studies were performed in Wistar rats.

Results: The optimized formulation with 132.89?mg of lipid, 106.7?mg of surfactant and 0.2% w/v of co-surfactant ensued in the nanoparticles with 219.9?±?3.7?nm of size, ?25.66?±?2.83?mV surface charge and 86.83?±?2.65% of entrapment efficiency. SEM studies confirmed the spherical shape of SLN formulations. The DSC and XRD studies revealed the transformation of crystalline drug to amorphous form in SLN formulation. In conclusion, in vivo studies in male Wistar rats demonstrated an improvement in the oral bioavailability of ZL from SLN over control ZL suspension.

Conclusions: The enhancement in the oral bioavailability of ZL from SLNs, developed with the aid of BBD, explicated the potential of lipid-based nanoparticles as a potential carrier in improving the oral delivery of this poorly soluble drug.     

Sustained release of piroxicam from solid lipid nanoparticle as an effective anti-inflammatory therapeutics in vivo

Abstract

This study aims to investigate the solid lipid nanoparticle (SLN) as a novel vehicle for the sustained release and transdermal delivery of piroxicam, as well as to determine the anti-inflammation effect of piroxicam-loaded SLN. SLN formulation was optimized and the particle size, polydispersity index, zeta potential (ZP), encapsulation efficiency, drug release, and morphological properties were characterized. The transdermal efficiency and mechanism of the piroxicam-loaded SLNs were investigated in vitro. With the inflammation induced edema model in rat, the anti-inflammatory efficiency of piroxicam-enriched SLNs (Pir-SLNs) was evaluated. The SLN formulation was optimized as: lecithin 100?mg, glycerin monostearate 200?mg, and Tween (1%, w/w). The particle size is around 102?±?5.2?nm with a PDI of 0.262. The ZP is 30.21?±?2.05?mV. The prepared SLNs showed high entrapment efficiency of 87.5% for piroxicam. There is no interaction between piroxicam and the vehicle components. The presence of polymorphic form of lipid with higher drug content in the optimized Pir-SLNs enables the Pir-SLNs to release the drug with a sustained manner. Pir-SLNs with oleic acid as enhancer can radically diffuse into both the stratum corneum and dermal layer, as well as penetrate through the hair follicles and sebaceous glands with significantly higher density than the other control groups. Pir-SLNs promptly inhibited the inflammation since the 3rd hour after the treatment by decreasing the PGE₂ level. SLN was demonstrated to be a promising carrier for encapsulation and sustained release of piroxicam. Pir-SLN is a novel topical preparation with great potential for anti-inflammation application.     

Enhanced oral bioavailability of lurasidone by self-nanoemulsifying drug delivery system in fasted state

Objective: The purpose of this work was to develop a new formulation to enhance the bioavailability and reduce the food effect of lurasidone using self-nanoemulsifying drug delivery systems (SNEDDSs).

Methods: The formulation of lurasidone-SNEDDS was selected by the solubility and pseudo-ternary phase diagram studies. The prepared lurasidone-SNEDDS formulations were characterized for self-emulsification time, effect of pH and robustness to dilution, droplet size analysis, zeta potential and in vitro drug release. Lurasidone-SNEDDSs were administered to beagle dogs in fed and fasted state and their pharmacokinetics were compared to commercial available tablet as a control.

Results: The result showed lurasidone-SNEDDS was successfully prepared using Capmul MCM, Tween 80 and glycerol as oil phase, surfactant and co-surfactant, respectively. In vitro drug release studies indicated that the lurasidone-SNEDDS showed improved drug release profiles and the release behavior was not affected by the medium pH with total drug release of over 90% within 5?min. Pharmacokinetic study showed that the AUC_(0–∞) and C_max for lurasidone-SNEDDS are similar in the fasted and fed state, indicating essentially there is no food effect on the drug absorption.

Conclusion: It was concluded that enhanced bioavailability and no food effect of lurasidone had been achieved by using SNEDDS.     

Solid lipid nanoparticles as vesicles for oral delivery of olmesartan medoxomil: formulation,optimization and in vivo evaluation

Objective: Olmesartan medoxomil (OLM) is an antihypertensive drug with low oral bioavailability (28%) resulting from poor aqueous solubility, presystemic metabolism and P-glycoprotein mediated efflux. The present investigation studies the role of lipid nanocarriers in enhancing the OLM bioavailability through oral delivery.

Materials and methods: Solid lipid nanoparticles (SLN) were prepared by solvent emulsion-evaporation method. Statistical tools like regression analysis and Pareto charts were used to detect the important factors effecting the formulations. Formulation and process parameters were then optimized using mean effect plot and contour plots. The formulations were characterized for particle size, size distribution, surface charge, percentage of drug entrapped in nanoparticles, drug–excipients interactions, powder X-ray diffraction analysis and drug release in vitro.

Results and discussion: The optimized formulation comprised glyceryl monostearate, soya phosphatidylcholine and Tween 80 as lipid, co-emulsifier and surfactant, respectively, with an average particle size of 100?nm, PDI 0.291, zeta potential of ?23.4?mV and 78% entrapment efficiency. Pharmacokinetic evaluation in male Sprague Dawley rats revealed 2.32-fold enhancement in relative bioavailability of drug from SLN when compared to that of OLM plain drug on oral administration.

Conclusion: In conclusion, SLN show promising approaches as a vehicle for oral delivery of drugs like OLM.     

Development and characterization of stabilized double loaded mPEG-PDLLA micelles for simultaneous delivery of paclitaxel and docetaxel

Objective: Double loaded micelles (DLM) in which paclitaxel (PTX) and docetaxel (DTX) were co-solubilized with monomethoxy poly(ethylene glycol)-block-poly(d,l-lactide) (mPEG-PLA) copolymer were prepared and evaluated in an aim to investigate the effect of a combination of PTX and DTX on the stability of mPEG-PLA micelles compared to single drug-loaded micelles (SDM), especially that recent clinical anticancer formulations are limited by the existence of toxic excipients and stability issues.

Materials and methods: The SDM and DLM of PTX and DTX were prepared by a solvent evaporation method. Micellar size, size distribution, drug loading content and drug release were investigated. Transmission electron microscopy was used to investigate the stabilization mechanism.

Results: The drug loading efficiency of both PTX and DTX in DLM and SDM were 25% and 10%, respectively. ¹H NMR showed a successful encapsulation of both drugs in the polymeric micelle. DLM showed better physical stability at drug concentrations higher than 1?mg/mL compared to SDM. Moreover, DLM, SDM-PTX and SDM-DTX were stable for 24, 9 and 1?h, respectively. The stabilization mechanism of DLM was investigated, a network structure of DLM was observed in TEM graphs. Furthermore, DLM showed complete and faster drug release compared to SDM. mPEG-PLA double loaded micelles can deliver two poorly water soluble anticancer drugs at clinically relevant doses. The obtained results offer a promising alternative for double drug therapy without any formulation associated undesirable effects and encourage further in vivo development and optimization of the DLM as a drug delivery system for anticancer drugs.     

Development of a nanogel formulation for transdermal delivery of tenoxicam: a pharmacokinetic–pharmacodynamic modeling approach for quantitative prediction of skin absorption

This study investigates potentials of solid lipid nanoparticles (SLN)-based gel for transdermal delivery of tenoxicam (TNX) and describes a pharmacokinetic–pharmacodynamic (PK–PD) modeling approach for predicting concentration–time profile in skin. A 2³ factorial design was adopted to study the effect of formulation factors on SLN properties and determine the optimal formulation. SLN-gel tolerability was investigated using rabbit skin irritation test. Its anti-inflammatory activity was assessed by carrageenan-induced rat paw edema test. A published Hill model for in vitro inhibition of COX-2 enzyme was fitted to edema inhibition data. Concentration in skin was represented as a linear spline function and coefficients were estimated using non-linear regression. Uncertainty in predicted concentrations was assessed using Monte Carlo simulations. The optimized SLN was spherical vesicles (58.1?±?3.1?nm) with adequate entrapment efficiency (69.6?±?2.6%). The SLN-gel formulation was well-tolerated. It increased TNX activity and skin level by 40?±?13.5, and 227?±?116%, respectively. Average C_max and AUC_0–24 predicted by the model were 2- and 3.6-folds higher than the corresponding values computed using in vitro permeability data. SLN-gel is a safe and efficient carrier for TNX across skin in the treatment of inflammatory disorders. PK–PD modeling is a promising approach for indirect quantitation of skin deposition from PD activity data.     

Mannosylated solid lipid nanoparticles for lung-targeted delivery of Paclitaxel

Objective: The present study discusses paclitaxel (PTX)-loaded mannosylated-DSPE (Distearoyl-phosphatidyl-ethanolamine) solid lipid nanoparticles (M-SLNs) using mannose as a lectin receptor ligand conjugate for lung cancer targeting and to increase the anticancer activity of PTX against A549 lung’s epithelial cancer cells.

Materials and methods: The PTX-SLNs were prepared by solvent injection method and mannose was conjugated to the free amine group of stearylamine. The M-SLNs obtained were characterized for their particle size, polydispersity index, zeta potential and morphology by transmission electron microscope.

Results: The M-SLNs were spherical in shape with 254?±?2.3?nm average size, positive zeta potential (3.27?mV), 79.4?±?1.6 drug entrapment efficiency and showed the lower extent of drug release 40% over 48?h in vitro. Cytotoxicity study on A549 cell lines and biodistrubtion study of drug revealed that M-SLNs deliver a higher concentration of PTX as compared to PTX-SLNs in an alveolar cell site.

Discussion and conclusion: These results suggested that mannosylated M-SLNs are safe and potential vector for lung cancer targeting.     

Optimization of gliclazide loaded alginate-gelatin beads employing central composite design

Abstract

Objective: The aim of this study was to optimize the formulation of alginate-gelatin (AL-GL) beads containing gliclazide (GLZ) employing design of experiments (DOE).

Significance: DOE enabled identification of the interaction between the studied factors, deep understanding of GLZ release pattern and acceleration of the optimization process.

Methods: A three-factor, three-level face centered design was employed. The effects of GLZ content (GLZ%, X₁), polymer ratio (AL:GL ratio, X₂), crosslinker concentration (glutaraldehyde, GA%, X₃), and their interaction on incorporation efficiency (IE) and release rate were studied. The optimized formulation was prepared using numerical optimization and evaluated by DSC, FT-IR, SEM and release rate studies.

Results: Increasing GA% (X₃) decreased IE (Y₁) with the highest magnitude of effect among the studied factors. On the other hand, increasing alginate content in AL:GL ratio (X₂) increased IE (Y₁). The amount of GLZ released Q_0.5h, Q_2h(pH 1.2) and Q_4h(pH 7.4) decreased by increasing GLZ% (X₁) and AL:GL ratio (X₂). Both drug content and AL:GL ratio appeared to affect water penetration into the gel matrix and drug release. Generally, there was a direct relationship between GA% (X₃) and GLZ release in pH 1.2 (Q_0.5h and Q_2h). However, in pH 7.4 (Q_4h), increasing GA% decreased GLZ release. In addition, increasing GA% caused deviation from zero-order release model. The actual responses of the optimized formulation were in close agreement with the predicted ones.

Conclusion: The selected factors and their levels studied in the optimization design were useful for tailoring the anticipated formulation characteristics and GLZ release pattern.     

Formulation of piperine solid lipid nanoparticles (SLN) for treatment of rheumatoid arthritis

The purpose of this work was to formulate piperine solid lipid nanoparticle (SLN) dispersion to exploit its efficacy orally and topically. Piperine SLN were prepared by melt emulsification method and formula was optimized by the application of 3² factorial design. The nanoparticulate dispersion was evaluated for particle size, entrapment efficiency and zeta potential (ZP). Optimized batch (128.80?nm average size, 78.71% entrapment efficiency and ?23.34?mV zeta potential) was characterized for differential scanning calorimetry (DSC), X-ray diffraction which revealed amorphous nature of piperine in SLN. The prepared SLN were administered orally and topically to CFA-induced arthritic rats. Ex vivo study using Franz diffusion cell indicate that piperine from SLN gel formulation accumulates in the skin. Pharmacodynamic study result indicates both the topical and oral piperine evoked a significant response compared to orally administered chloroquine suspension. The results of ELISA show significant reduction in TNFα in treated rat which might be the reason behind the DMARD action of piperine SLN.     

Preparation,optimization, characterization and in vivo pharmacokinetic study of asiatic acid tromethamine salt-loaded solid lipid nanoparticles

Purpose: To enhance the oral bioavailability of asiatic acid tromethamine salt (AAS) by encapsulation in solid lipid nanoparticles (SLN).

Methods: The AAS-loaded SLN (AASLN) was prepared by the modified solvent injection method with glycerin monostearate (GMS) as lipid and poloxamer 188 as surfactant. A Box–Behnken design was used to optimize the formulations. Physicochemical characterization was carried out by using dynamic light scattering, scanning electron microscopy (SEM), differential scanning calorimetry (DSC) and X-ray diffraction (XRD). Stabilities at 4?°C and pH 1.2 were investigated by particle size or/and entrapment efficiency (EE%). The in vivo pharmacokinetics was evaluated by HPLC-MS/MS.

Results: The optimal formulation of AASLN had an average size of 237?nm with zeta potential of ?35.9?mV, and EE% of 64.4%. SEM showed that the AASLN had spherical shape with smooth surface. Furthermore, DSC and X-ray analyses indicated that AAS was amorphous state and the crystal degree of GMS was significantly decreased in the formulation. AASLN showed excellent stability at 4?°C for 1 month and no coacervation at pH 1.2. The bioavailability of AAS in SLN was found to be 2.5-fold higher than that of AAS alone after a single oral administration in rats.

Conclusions: This study reveals that SLN is developed as a promising oral delivery system of AAS with significantly enhanced bioavailability and good storage stability.     

Development of a topical mupirocin spray for antibacterial and wound-healing applications

Objective: The aim of this study was to develop mupirocin topical spray using Eudragit E100 as a film-forming agent for the treatment of bacterial skin infections as well as to promote wound healing.

Materials and methods: Twenty-seven of mupirocin formulations were formulated containing Eudragit E100 and other excipients. Mupirocin spray was prepared by aerosol crimping and filling machine using HFA-134a as a propellant. The formulations were evaluated for their stability and physicochemical properties. The factorial study was applied to evaluate the effects of glycerol and PEG400 on mupirocin-loaded Eudragit E100 films. The optimized formulation was assessed of drug release, antibacterial activities and in vitro cell line studies in comparison to the ointment formulation.

Results and discussion: Mupirocin sprays were formulated and optimized to obtain the formulation with excellent physicochemical and mechanical properties of the dressing film. The formulation had an excellent stability up to a year with more than 80% of mupirocin content. Mupirocin was released from the film up to 90% within 2?h. The formulation had a potent antibacterial effect against S. aureus and S. epidermidis. The formulation was safe to use as a topical formulation that had no toxicity to keratinocytes, fibroblasts and monocytes. The formulation also had an antiendotoxin effect without stimulating the production of NO and inflammatory cytokines (IL-1β and TNF-α).

Conclusions: Mupirocin topical spray was successful developed as a topical formulation and can be used instead of the ointment formulation. Animal experiments are warranted to further emphasize the safe use in the human skin.     

Evaluation of the percutaneous absorption of chlorpromazine from PLO gels across porcine ear and human abdominal skin

Objective: The overall objective of this work is to determine the percutaneous absorption of chlorpromazine hydrochloride from pluronic lecithin organogels (PLO gels) and verify the suitability of topically applied chlorpromazine hydrochloride PLO gels for use in hospice patients for relieving symptoms such as vomiting and nausea during the end stages of life.

Methods: PLO gels of chlorpromazine hydrochloride were prepared using isopropyl palmitate (IPP) or ricinoleic acid (RA) as oil phase. In vitro percutaneous absorption of chlorpromazine hydrochloride was assessed through porcine ear and human abdominal skin. Further, the theoretical steady state plasma concentration (C_ss) of chlorpromazine was calculated from the flux values.

Results: The pH, viscosity, and stability of both PLO gels prepared with IPP and RA were comparable. The thixotropic property of RA PLO gel was found to be better than that of IPP PLO gel. The permeation of chlorpromazine hydrochloride was higher from RA PLO gel than from IPP PLO gel and pure drug solution. Theoretical C_ss of chlorpromazine from pure drug solution, IPP PLO gel and RA PLO gel were found to be 1.05, 1.20, and 1.50?ng/ml, respectively. PLO gels only marginally increased the flux and theoretical C_ss of chlorpromazine.

Conclusion: From this study, it is clearly evident that PLO gels fail to achieve required systemic levels of chlorpromazine following topical application. Chlorpromazine PLO gel may not be effective in treating nausea and vomiting for hospice patients with swallowing difficulties.     

Taste masking of azithromycin by resin complex and sustained release through interpenetrating polymer network with functionalized biopolymers

Abstract

Objective: The objective was to evaluate taste masking of azithromycin (AZI) by ion exchange resins (IERs) and the formation of covalent semi interpenetrating polymer network (IPN) beads using chitosan (CS) and sodium carboxylated agarose (SCAG) for sustained release of drug.

Methods: Methacrylic acid (MAA)-based IERs were prepared by suspension polymerization method. Drug release complexes (DRCs) were prepared by different drug:resin ratios i.e. 1:1, 1:2 and 1:4. The resultant DRCs were characterized using DSC, FTIR, PXRD, in vivo and in vitro taste masking, and in vitro drug release at gastric pH. IPN beads were prepared by entrapping DRCs with bio polymers and cross linked with trisodium citrate (NaCIT), and further cross-linked with glutaraldehyde (GA) for sustained release of AZI.

Results: In vitro and in vivo taste masking studies showed that MD1:4 DRC formulation was optimal. The release of AZI from DRC was found to be very fast at gastric pH i.e. 97.37?±?1.02% within 45?min. The formation of IPN beads was confirmed by FTIR. The release of drug from IPN beads at gastric and intestinal pH was found to be “<28% and <60%”, respectively. The release kinetics showed Fickian diffusion profile for ionically cross-linked beads and zero-order release mechanism for GA cross-linking beads.

Conclusions: DRCs can be effectively used for taste masking and newly formulated IPN beads demonstrated sustained release of AZI.     

Formulation and development of ophthalmic in situ gel for the treatment ocular inflammation and infection using application of quality by design concept

Context: The conventional liquid ophthalmic delivery systems exhibit short pre-corneal residence time and the relative impermeability to the cornea which leads to poor ocular bioavailability.

Objective: The aim of this study was to apply quality by design (QbD) for development of dexamethasone sodium phosphate (DSP) and tobramycin sulfate (TS)-loaded thermoresponsive ophthalmic in situ gel containing Poloxamer 407 and hydroxyl propyl methyl cellulose (HPMC) K4M for prolonging the pre-corneal residence time, ocular bioavability and decreases the frequency of administration of dosage form. The material attributes and the critical quality attributes (CQA) of the in situ gel were identified. Central composite design (CCD) was adopted to optimize the formulation.

Materials and methods: The ophthalmic in situ forming gels were prepared by cold method. Materials attributes were the amount of Poloxamer 407 and HPMC and CQA identified were Gel strength, mucoadhesive index, gelation temperature and % of drug release of both drug.

Results and discussion: Optimized batch (F*) containing 16.75% poloxamer 407 and 0.54% HPMC K4M were exhibited all results in acceptable limits. Compared with the marketed formulation, optimized in situ gel showed delayed T_max, improved C_max and AUC in rabbit aqueous humor, suggesting the sustained drug release and better corneal penetration and absorption.

Conclusion: According to the study, it could be concluded that DSP and TS would be successfully formulated as in situ gelling mucoadhesive system for the treatment of steroid responsive eye infections with the properties of sustained drug release, prolonged ocular retention and improved corneal penetration.     

A synergistic approach of adapalene-loaded nanostructured lipid carriers,and vitamin C co-administration for treating acne

Abstract

The present study documents the fabrication and characterization of a topically applicable gel loaded with nanostructured lipid carriers (NLCs) of adapalene (ADA) and vitamin C (ascorbyl-6-palmitate [AP]). The NLCs were prepared by high pressure homogenization (HPH) method followed by incorporation into AP loaded gel. The fabricated system was characterized for size, poly dispersity index, entrapment efficiency (EE) and in vitro drug release properties, and was further investigated for skin compliance, skin transport characteristics (skin permeation and bio-distribution), rheological behavior, texture profile analysis and anti-acne therapeutic potential against testosterone-induced acne in male Wistar rats. The NLC-based formulation improved targeting of the skin epidermal layer and reducing systemic penetration. The co-administration of vitamin C led to an adjunct effect in acne therapy in physiological conditions. In brief, the present results suggest the potential of NLCs as a novel carrier for the dermal delivery of ADA and also the synergistic effect of vitamin C in topical therapeutics.